Nothing Special   »   [go: up one dir, main page]

Ti 85 300 10 Ge

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

UV ASTRON DISINFECTION SYSTEM

UV ASTRON DISINFECTION SYSTEM


USING MEDIUM PRESSURE LAMP TECHNOLOGY

UV ASTRON CONTROL MODULE control switches to lower energy levels A mounting rack is available to mount the
guaranteeing energy savings due to lower chamber and / or control module in any TI.85.300.10.GE
The user friendly control module is power consumption and an increase in desired location.
mounted separately from the chamber. All lamp life. This is a fully automised process
components are class ‘A’ approved ensuring which needs no manual action.
long trouble free operation. The design of
the cabinet allows maintenance work to be
carried our swiftly without special tooling.
The “service mode program” enables simple
changes and diagnostic checks to be made
with ease.

In case of a temperature alarm the UV


lamps are switched off automatically and a
relay contact is activated. The housing of
the cabinet is steel coated and splash proof
executed to meet the nowadays demands?

If the flow and /or the transmission of


the water are not stable, the UV energy
from the lamps can be adjusted in four GENERAL
steps, which will optimise disinfection Each unit consists of a UV chamber and a
FEATURES
performance. At lower flows or better Ultra violet disinfection has been accepted separate control module which houses the
transmission values, the disinfection • Reliable and safe disinfection worldwide as a reliable and safe disinfection electrical components that operate the lamps.
technology which offers the following specific
UV Astron Control Module • Easy operation and maintenance
advantages: The chamber is designed to ensure optimum
• Simple change of UV lamps disinfection of the liquid and has all the
CLEANING MECHANISM UV SENSOR • UV disinfection does not change the features to control and optimise this process.
• Compact Stainless Steel Housing
smell of the water being treated The configuration of the chamber is based on
A cleaning mechanism is available as an A UV sensor monitors the disinfection • Standard UV intensity sensor • UV disinfection does not change the the optimum design in hydrodynamics, high
optional item. The cleaning mechanism process continuously. The sensor is mounted composition of the water efficiency lamps and an extremely low head
• Hydrodynamic correct chamber
eliminates possible fouling on the quartz on the chamber wall, the point which is the • UV disinfection does not change the loss. These parameters, together with the low
design
sleeve that surrounds the lamp. For furthest away from the lamps. This point taste of the water cost for installation, are the key features of the
applications were organic material can enter has been chosen as it receives the lowest UV • Horizontal or Vertical Mounting • No micro-organisms known are not unit. In most cases the energy savings gained
the UV chamber, the cleaning mechanism energy, and therefore monitoring is important affected by UV light on its low head loss are higher than the actual
• Optional hand-operated
is a desirable feature. The cleaning action to ensure satisfactory disinfection. cleaning mechanism lamp replacement cost on an annual basis if
can be carried our manually or an automatic The heart of each UV unit consists of one the system is compared with the traditional
UV Astron Hand Cleaning Option wiper can be supplied. The automatic • 11 models in range or more specially designed UV lamps. The chamber designs. The chamber has been
cleaning mechanism is time interval and In case of a UV alarm a dry contact can be • Low capital and operating cost lamp emits a unique pattern of wavelengths designed to ensure easy and swift service.
event related. In case of an immediate used to undertake any desired action. The which is absorbed by the micro-organism. All
• No disinfection by-products medium pressure UV lamps provide sufficient In case of a mechanical problem with the
demand for a wiper action ( such as a low actual values are shown on the display on the
UV level alarm) the UV sensor is able to control module. These values can be displayed • Effective for wide variety of energy to damage the DNA material causing UV lamp, the lamp status indicator will
initiate up this action. in relative values or in absolute values. micro-organisms inactivation of the unwanted micro-organisms signal, thus giving the operator the possibility
as well as energy which affects the cell wall, to undertake the appropriate action. Side
• Control module proteins and enzymes. This offers advantages, access end caps allow for easy replacement
• EMC certified especially in these situations were a micro- and servicing of the lamps. This innovative
organism is able to repair the damage inflicted construction has been developed to optimise
• Controllable medium pressure on the DNA. This repair mechanism is mostly the ergonomics. The UV lamps need to
lamps known in literature as photo reactivation. remain in a horizontal position to ensure its
• Efficiency independent of water optimum homogeneous emmittance.
UV Astron Automatic Cleaning Option Chemfeed Limited
temperatures DESIGN AND FUNCTION
Priory Works
The chamber can be mounted horizontally or
Tonbridge, Kent TN11 0QL The Astron UV disinfection systems have
Telephone: +44 (0) 1732 771777 vertically by means of rotating the chamber
UV Astron Intensity Sensor Option been developed by Wallace & Tiernan to meet over its axis. This offers total mounting
Fax: +44 (0) 1732 771800
Email: inform@wallace-tiernan.com the current demand for a user friendly, reliable flexibility.
http://www.wallace-tiernan.com and above all economical non chemical
disinfection solution.
MEETING QUALITY STANDARDS
In the continued development and improvement of our products
certain specifications may be altered without prior notice. 06/03
UV Astron Model Astron 35 Astron 80 Astron 135 Astron 210 Astron 275 Astron 290 Astron 350 Astron 525 Astron 700 Astron 900 Astron 1250
UV Chamber
Number of Lamps 1 1 1 4 1 3 4 2 3 4 6
Lamp Type WTL1000 WTL2000 WTL1000 WTL2000
Chamber Material SS316Ti acc to AISI
Flange Connection (DIN2576) NW80 NW125 NW200 NW125 NW200
IP Rating IP54
Operating Pressure (Bar) 10 10 10 10 10 10 10 10 10 10 10
Wetted Parts Viton, Quartz, SS316Ti
Weight - dry (kgs) 14 59 59 60 63 60 60 63 63 63 64
Weight - wet (kgs) 15 81 81 82 86 82 82 86 86 86 87
Dimensions H x W x D (mm) 305 x 390 x 300 415 x 620 x 350 440 x 620 x 400 415 x 620 x 350 440 x 620 x 400
Internal Polishing Chamber (µ) 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8
Drain and Air Socket (G) 0.375” 0.5” 0.5” 0.5” 0.5” 0.5” 0.5” 0.5” 0.5” 0.5” 0.5”
Calibrated UV Sensor Yes, with 4-20mA signal
Temperature Detection Yes, via PT100 Yes, via PT100 Yes, via PT100 Yes, via PT100 Yes, via PT100 Yes, via PT100 Yes, via PT100 Yes, via PT100 Yes, via PT100 Yes, via PT100 Yes, via PT100
Hand Operated Cleaning Mechanism Option Option Option Option Option Option Option Option Option Option Option
Automatic Cleaning Mechanism No Option Option Option Option Option Option Option Option Option Option
Disinfection Control No Option Option Option Option Option Option Option Option Option Option
Control Module
Module Material Painted Steel
Door Interlock Switch Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Hours Counter Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
IP Rating IP54
Weight (Kgs) 30 65 65 153 65 173 193 85 173 193 233
Dimensions H x W x D (mm) 600 x 380 x 210 760 x 760 x 300 1800 x 800 x 400 760 x 760 x 300 1800 x 800 x 400 760 x 760 x 300 1800 x 800 x 400
Cabinet Temperature Detection Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Forced Cabinet Cooling Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
% Max Humidity 60 60 60 60 60 60 60 60 60 60 60
Power Consumption (kW) *No Disinfection Control 0.9* 0.9* 1.82* 3.6* 1.82* 5.46* 7.28* 3.64* 5.46* 7.28* 10.92*
Cable Length - Chamber / Module (m) 5 5 5 5 5 5 5 5 5 5 5
Electrical Supply (Ph / V / Hz) 1+N / 230 / 50 3+N / 400 / 50 3+N / 230 / 50 3+N / 400 / 50
Mounting Location Wall or Optional Skid Standing or Optional Skid Wall or Optional Skid Standing or Optional Skid Wall or Optional Skid Standing or Optional Skid
General
ISO9001 Certified Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
EMC Certified Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes

Capacity Table at D=40mJ/cm2 Flow (m3/hr)


100% (T10mm Scale) 36 81 134 276
98% 32 71 115 232
96% 30 63 100 197 376
94% 27 56 87 169 323
92% 25 50 77 126 146 280
90% 23 45 68 113 127 244 313
88% 21 40 61 101 125 215 274
86% 19 37 54 91 111 134 242 312
84% 18 33 49 83 99 120 214 277
82% 16 30 44 75 89 107 190 246 347
80% 15 27 39 68 80 170 220 311
75% 12 21 30 53 71 129 168 238
70% 10 17 24 42 64 100 129 184

You might also like