WASHING MACHINE

SERVICE MANUAL
CAUTION
READ THIS MANUAL CAREFULLY TO DIAGNOSE TROUBLES
CORRECTLY BEFORE OFFERING SERVICE.

MODEL : WD-1403RD
Jul. 2006 PRINTED IN KOREA P/No.: MFL30574733
 CONTENTS
1. SPECIFICATION............................................................................................................................3
2. FEATURES & TECHNICAL EXPLANATION ................................................................................ 4
3. PARTS IDENTIFICATION ............................................................................................................ 6
4. INSTALLATION ............................................................................................................................. 7
5. OPERATION ................................................................................................................................10
6. WIRING DIAGRAM / PROGRAM CHART ...................................................................................12
7. TROUBLE SHOOTING................................................................................................................13
7-1.BEFORE SVC CHECKING ..................................................................................................13
7-2.QC TEST MODE..................................................................................................................13
7-3.HOW TO KNOW THE WATER LEVEL FREQUENCY.........................................................13
7-4.HOW TO KNOW TO TEMPERATURE OF EACH THERMISTOR AT OPERATING CONDITION......13
7-5.ERROR DISPLAY ................................................................................................................14
8. ERROR DIAGNOSIS AND CHECK LIST ....................................................................................16
8-1. DIAGNOSIS AND ANSWER FOR ABNORMAL OPERATION ...........................................16
8-2. FAULT DIAGNOSIS AND TROUBLE SHOOTING .............................................................19
9. DISASSEMBLY INSTRUCTIONS ...............................................................................................25
10. EXPLODED VIEW AND PARTS LIST .......................................................................................33
10-1. THE EXPLODED VIEW OF CABINET ASSEMBLY .........................................................33
10-2. THE EXPLODED VIEW OF CONTROL PANEL AND DISPENSER ASSEMBLY ............34
10-3. THE EXPLODED VIEW OF DRUM AND TUB ASSEMBLY .............................................35

2
1. SPECIFICATION

ITEM WD-1403RD

POWER SUPPLY 127V~, 60Hz

PRODUCT WEIGHT 65kg

WASHING 1200W
ELECTRICITY
CONSUMPTION DRAIN MOTOR 1400W

REVOLUTION
SPIN WD-1403RD No Spin/400/600/800/1000/1200/1400
SPEED

OPERATION WATER PRESSURE 0.3-10kgf/cm2 (30-1000kPa)

CONTROL TYPE Electronic
WASH CAPACITY Refer to the Rating Label
DIMENSION 600mm(W)x640mm(D)x850mm(H)
WASH PROGRAM Cotton, Cotton Quick. Synthetic, Delicate, Wool, Hand Wash,
Quick30, Baby Care
RINSE Normal, Rinse+, Rinse++, Rinse+Hold, Normal+Hold
DOOR SWITCH TYPE Bi-Metal type
WATER LEVEL 10 steps (by sensor)
RESERVATION From 3 hours to 19 hours
SENSING OF THE LAUNDRY AMOUNT Adapted
FUZZY LOGIC Adapted
DISPLAY OF THE REMAINING TIME Adapted
ERROR DIAGNOSIS 10 items
POWER AUTO OFF Adapted
CHILD LOCK Adapted
AUTO RESTART Adapted
TIME SAVE Adapted

3
2. FEATURES & TECHNICAL EXPLANATION
2-1.FEATURES

 Direct Drive System

The advanced Brushless DC motor directly drives the drum without
belt and pulley.

 Water Circulation
Spray detergent solution and water over the load over continu.
Clothes are soaked more quickly and thoroughly during wash cycle.
The detergent suds can be removed more easily by the water shower during
rinse cycle. The water circulation system uses both water and detergent more
efficiently.

 Built-in Heater
Internal heater automatically heats the water to the best temperature on selected
cycles.

 Child Lock
The Child lock prevents children from pressing any button to change the settings
during operation.

 More economical by Intelligent Wash System

Intelligent Wash System detects the amount of load and water temperature, and
then determines the optimum water level and washing time to minimize energy
and water consumption.

 Low noise speed control system

By sensing the amount of load and balance, it evenly distributes load to minimize
the spinning noise level.

 Safety device (Aqua lock)

Aqua lock System is designed for detecting water leak during operation to
prevent water from spilling on the floor.

 Automatic Wash Load Detection

Automatically detects the load and optimizes the washing time.

4
2-2.DETERMINE WASHING TIME BY FUZZY LOGIC
To get the best washing performance optimal time is determined by sensing of water temperature,
selected washing temperature and laundry amount.

water
temperature
washing time

selected the best

washing FUZZY rinsing time washing
temperature LOGIC performance
spin rhythm, time
laundry
amount

SENSING PROCESSING DETERMINATION EFFECT

2-3.WATER LEVEL CONTROL

This model adopts a pressure sensor which can sense the water level in the tub.
Water supply is stopped when the water level to the preset level, then washing program proceeds.
Spinning does not proceed until the water in the tub reduces to a certain level.

2-4.THE DOOR CAN NOT BE OPENED

While program is operating.
While Door Lock light turns on.

5
3. PARTS IDENTIFICATION

Drawer

ACCESSORIES

Inlet hose(1EA) Option : Hot/Cold(2EA) Spanner

6
4. INSTALLATION
Before servicing ask the customer what the trouble is.
Check the adjustment(power supply is 220-240V~, remove the transit bolts....)
Check the troubles referring to the trouble shooting.
Decide service steps referring to disassembly instructions.
And then, service and repair.
After servicing, operate the appliance to see whether it works O K or NOT.
STANDARD INSTALLATION
The appliance should be installed as follows.

REMOVE THE TRANSIT INSTALL THE APPLIANCE ADJUST THE

BOLTS ON FLAT AND FIRM SURFACE HORIZONTAL

Remove the transit bolts Turn the leveling feet to

(4EA: )with supplied spanner. set the appliance horizontally.

Keep the transit bolts and

spanner for future use.
Insert the provided 4 caps
into the hole

1
The appliance goes up by
rotating the feet clockwise.

The appliance come down by

rotating the feet counter
clockwise.

7
HOW TO CONNECT INLET HOSE
Check that the rubber packing is inside of the
valve connector.
Connect the inlet hose firmly to prevent leak.

CONNECT DRAIN HOSE

Make sure that the hose is not twisted. Avoid submerging the end of the hose.

The drain hose should be placed under 100cm from the floor.

CONNECT POWER PLUG

Connect the power plug to the wall outlet. Avoid connecting several electric devices,
It may be the cause of a fire.

8
TEST OPERATION

Preparation Press the POWER button. Press the Start/Pause

for button.
washing.

Connect the power plug to

the outlet. In case of Coloreds program.
Connect the inlet hose.

Check the water heating. Check automatic reverse Check the water supply.
turn.

Press the Rinse+Medic Rinse Check if the drum rotates Check if water is supplied
button simultaneously and the clockwise and counterclockwise. through the detergent dispenser.
present temperature will be
displayed.

Check drain and spin Power off and open the Water removal
door

Turn off Wash and Rinse after

pressing the Start/Pause button
and start the machine again.
Check drain and spin.
Power off and then power on. If SVC is needed during
Check if the door can be check, remove
opened after 3 minutes. the remaining water by pulling
out the hose cap.

9
5. OPERATION

Cycle Selector Additional programs

• Rotate the Cycle selector • Time Delay : Allows the start of any cycle to be delayed
knob to select the cycle for 3~19 hours.
designed for different • Favorite : Favorite program allows you to store a
types of fabric and soil customized operation for next use.
levels. • Intensive : If the laundry is heavily soiled “Intensive”
option is effective.
• Medic Rinse : For high effectiveness or more purity in
rinse operation you can choose Medic Rinse option.
Medic Rinse is default in Baby Care program.

Power

• Use this button to turn the

power On/Off.

Start/Pause Option Button

• Use this button to Start/ • Pre Wash : If the laundry is heavily soiled, “Pre Wash” Cotton is
Stop the washer. recommended.
• Soak : Use this mode to wash normal clothes or thick and heavy
clothes which are excessively dirty.
• Crease Care : If you want to prevent crease, select Crease Care
button.
• Rinse + Spin : Use this option to rinse and then spin.

10
 LED display
Spin Selector knob
Display the estimated remaining time (Hour : Minute)
to finish. • To change the spin speed, turn the
In case of abnormal operation, error indications are Spin knob to cycle through available
displayed. options.
( )
See troubleshooting guide.

Tub Clean
• Tub Clean course can be set by
pressing and holding Intensive
and Pre Wash button
simultaneously.
• Tub Clean is special cycle to
clean the inside of the washer.

Rinse, Temp. Button

• Select a water temperature based
on the type of load you are
washing.
• By pressing the Rinse button, the
Rinse type can be selected.

Beep on/off
Child Lock
• The Beep on/off function can be set by pressing • Use this option to prevent unwanted
and holding the Option and Rinse button use of the washer. Press and hold
simultaneouly. Crease Care and Medic Rinse button
for 3 seconds to lock/unlock control.
• When Child lock is set, CHILD LOCK
lights and all buttons are disabled
except the Power button. You can
lock the washer while it is operating.

11
6. WIRING DIAGRAM / PROGRAM CHART

A
Wash Rinse
U
Extra & Spin
Pre Main 1 2 3 T
Stain(4~6) E
O
Wash N **Approx
W W W W W W D
Wash

Rinse

Rinse

Rinse

Rinse

Drain

D
Spin

I I I I I Working
Wash

O
Drain

Drain

Drain

Drain

Drain
Heat

⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄
S ⁄ ⁄ ⁄ ⁄ ⁄ F Time
S S S S S T
S S S S S F (Minute)
1 2 3 4 5 6 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

60 (”—) 60 180 120 (”—) 60 180 120 180 60 180 120 180 60 180 120 180 60 180 120 180 60 480 180 20 20
8 12
Cotton 1:51
42
8 12
Synthetic 1:34
42
Cotton 8 12
Quick 1:31
42

Delicate 1:7
8
Hand Wash 56

Wool 56
12
Quick 30 30

Rinse+Spin 20
8
Baby Care 2:27
8 12
Wash 68
42

Spin 15

12
7. TROUBLE SHOOTING
7-1.BEFORE SVC CHECKING
Be careful of electric shock or disconnecting the parts while trouble shooting.
Voltage of each terminal in 220-240V~ and DC while applying an electric current.

7-2.QC TEST MODE.

Pressing Option(Left) and Rinse button simultaneously.
Press the Power button, while the above condition.
Press the Start/Pause button as follows.
Number of times the
Start/Pause button is pressed Check Point Display Status

None Turns on all lamps and locks the door.

1 time Tumble clockwise. rpm (42~50)
2 times Low speed Spin. rpm (55~65)
3 times High speed Spin. rpm (125~155)
4 times Inlet valve for prewash turns on. Water level frequency (25~65)
5 times Inlet valve for main wash turns on. Water level frequency (25~65)
6 times Inlet valve for hot water turns on. Water level frequency (25~65)
7 times Inlet valve for bleach turns on. Water level frequency (25~65)
8 times Tumble counterclockwise. rpm (42~50)
9 times Heater turns on for 3 sec. Water temperature
10 times Circulation pump turns on. Water level frequency (25~65)
11 times Drain pump turns on. Water level frequency (25~65)
12 times Off -

7-4.HOW TO KNOW THE WATER LEVEL FREQUENCY

Press the Intensive and Option(Left) button simultaneously.

The digits means water level frequency (10-1 kHz)

ex) 241 : Water level frequency = 241 10-1kHz

=24.1kHz

13
7-5.ERROR DISPLAY.
If you press the Start/Pause button in error condition, any error except ‘ ’ will disappear and the
machine will change into pause status.
In case of if the error is not resolved within 20 sec., and in case of other errors,
if the error is not resolved within 4 min., power will be turned off automatically and the error only will be
blinked. But in case of , power will not be turned off.

ERROR SYMPTOM CAUSE

1 WATER INLET • Not reached to the water level(246)within 8

ERROR minutes after water supplied or not reached to
the preset water level within 25 minutes.

2 DRAIN ERROR • Not fully drained within 10 minutes.

3 OVERFLOW • Water is over flowing(over 8 level).

ERROR If “ ” is displayed, drain pump operates to
drain water automatically.

SENSOR PRESSURE
4 • The sensor pressure switch is out of order.
S/W ERROR

5 DOOR OPEN • In case of operating the reservation function or

ERROR the other function with door opened. Close the
door, then the error display is resolved.
• The door switch is out of order.

6 IMBALANCE • The appliance is tilted.

ERROR • Laundry is gatherd to one side.

7 HEATING • The THERMISTOR is out of order.

ERROR

14
 ERROR SYMPTOM CAUSE

LOCKED
MOTOR • The connector in the LEAD WIRE ASSEMBLY is not connected to
8
ERROR the connnector of STATOR ASSEMBLY
Reconnect or repair the connector
• The hall sensor is out of order/defective.
Replace the STATOR ASSEMBLY

9 • Water leaks

POWER
10 FAILURE • The washer ecperienced a power failure

15
8. ERROR DIAGNOSIS AND CHECK LIST
8-1.DIAGNOSIS AND ANSWER FOR ABNORMAL OPERATION

SYMPTOM GUIDE FOR SERVICE CALL

NO POWER
Is the power plug connected firmly to
220-240V~ outlet?
YES
Power failure? or Breaker opened?

NO
Visit to check

WATER INLET TROUBLE

Is " " displayed?

YES
Is the tap opened?

YES
Is the tap frozen?

NO
Is the water supply shut-off?

NO

Is filter in the inlet valve clogged with Clean the filter of

inlet valve
foreign material?
YES

NO
Visit to check

16
 SYMPTOM GUIDE FOR SERVICE CALL

• DOOR DOES NOT

Started with door opened? YES
OPEN
• ERROR DISPLAYED
ON THE PROGRAM NO Close the door

Visit to check

Check if the door switch is O.K.

• DRAIN TROUBLE Is " " displayed?

YES

Is the debris filter clogged with foreign Clean up

material such as pin, coin and etc.? YES
the filter.
NO

Is the drain hose frozen with water,

kinked or crushed?
NO

Visit to check

• POWER FAILURE
Restart the cycle

17
 SYMPTOM GUIDE FOR SERVICE CALL

Suds overflow from the

Is low-sudsing detergent for the drum
appliance.
washing machine used?
(In this condition, wash and
YES
spin do not operate
LOW-SUDSING
normally) Is the proper amount of detergent used
as recommended?
YES

Recommend to reduce the using amount

of detergent.
This appliance has the automatic suds sensing function which
operates under much suds condition for good rinse and
preventing overflow.
When much suds are sensed, suds removing function such as
drain, water input and pause will operate without rotating the
drum.

No effect of softener Is softener put in the correct compartment of

the drawer?
YES

Is the drawer closed during wash?

YES

Is the softener cap clogged?

YES

Explain how to use softener

< Clean the compartment for softener >

Visit to check

18
8-2.FAULT DIAGNOSIS AND TROUBLE SHOOTING

CAUTION

1. Be careful of electric shock or disconnecting the parts while trouble shooting.

2. First of all, check the connection of each part terminal with wiring diagram.
3. If you replace the PWB ASSEMBLY, Put in the connectors correctly.

NO POWER

When measuring the voltage of the outlet,

is the voltage AC 220-240V~? NO Check the fuse?

YES

Is the led(1) on?

NO Replace MAIN PWB
ASSEMBLY

<PWB ASSEMBLY (MAIN)>

YES

Is connector(2) disconnected or
Reconnect the PWB
disassembled? YES ASSEMBLY

<PWB ASSEMBLY (Power)> NO

Reconnect the PWB

Is wire of the PWB ASSEMBLY disconnected?
YES ASSEMBLY

NO

Replace PWB ASSEMBLY

19
 NO WATER SUPPLY

Is water supply shut-off?

NO
Is the tap opened? NO Open the tap.
YES
When you press both Intensive button and Check the AIR CHAMBER
Option(Left) button simultaneously, is the water YES and the tube clogged
level frequency below 240? with impurity.
NO
Is the inlet valve filter clogged with impurity? YES Clean the filter.
NO
Is resistance between each terminal of INLET Replace the INLET VALVE
VALVE ASSEMBLY is 2~8 k ? NO ASSEMBLY.

YES

Check the voltage of the inlet valve connector

220-240V~. NO Replace the MAIN PWB

(Refer to 7-2 QC TEST MODE) ASSEMBLY

DETERGENT DOES NOT FLOW IN

Is water supplied? NO Refer to

NO WATER SUPPLY
YES
Are replaceptacles correctly connected to the Check the wiring on the
terminals of the INLET VALVE ASSEMBLY? NO dispenser.
YES
Put the detergent in the
correct position
Is detergent put in the correct compartment of
the drawer? NO PRE+MAIN
MAIN WASH
YES : Detergent

Is the detergent hardened? YES Clean the drawer.

20
 SOFTENER DOES NOT FLOW IN

Refer to
Is water supplied? NO
NO WATER SUPPLY
YES
Are receptacles correctly connected to the terminals Check the wiring on the
of the INLET VALVE ASSEMBLY?
NO dispenser.
YES

Is softener put in the correct compartment of the

NO Put it in the correct
drawer? compartment.

YES

Is the softener cap clogged? YES Clean the cap and

drawer.

ABNORMAL SOUND

Is the motor bolt loosened? YES Fix the bolt tightly.

NO
Replace the STATOR
Is there friction noise from the motor? YES ASSEMBLY or ROTOR
ASSEMBLY.

21
 HEATING WITHOUT WATER

When pressing Intensive and Option(Left) at the

same time after draining, is the water level frequency
Replace the
248 ~ 262 or more?
S.PRESSURE SWITCH
When pressing Rinse and Temp. buttons at the
ASSEMBLY
same time while wash, is the water level
frequency between 230 - 243?

Checking voltage between two pins (Connector Replace the POWER

RD & YL ) as press the POWER button is the PWB ASSEMBLY
voltage 220-240V~?

DRAIN MALFUNCTIONING

Repair the DRAIN

Is the drain hose twisted or frozen? HOSE ASSEMBLY.

Remove foreign
Is the impeller of the drain pump clogged? material.

Reconnect or repair the

Is the connector disconnected, disassembled? connector

Is the coil of the drain pump cut-off? Repair the DRAIN

PUMP ASSEMBLY.
(resistance of coil is 80~150 )

When checking voltage between connectors

Repair the MAIN PWB
( , )on spinning, is the voltage 220-240V~ ASSEMBLY.
as the figure?

22
WH/RD

BLUE

HEATING CONTINUOUSLY ABOVE

THE SETTING WATER TEMPERATURE

Option(Left) and Temp.

button simultaneously

temperature?
(Refer to the 7-2 QC Test Mode)

23
 SPIN TROUBLE

Check the S.PRESSURE SWITCH

Check on the spinning, is the frequency of the
ASSEMBLY or HOSE (Pressure).
water level 248 or more. The frequency can be
If the problem is on the
checked by pressing the Intensive and Option(Left) NO S.PRESSURE SWITCH
buttons at the same time on the program.
ASSEMBLY or the HOSE, replace
the S.PRESSURE SWITCH
ASSEMBLY or the HOSE.
YES
When pressing Rinse, Medic Rinse and POWER
buttons at the same time after power off, press the
Start/Pause button 1 times, is the drum low speed YES Normal
spin?
NO
Is it disconnected, or disassembled?
[Red:3pin(1), GY:4pin(2)] YES Correct the connector.

NO
Check the motor connector, is the resistance of
the terminal same as the figure?
MOTOR TERMINAL (1) Replace the STATOR
NO ASSEMBLY
Resistance of terminal:
About 5 15
(1)

YES
Replace the MAIN PWB ASSEMBLY

DRAIN TROUBLE

Does the spring of Latch Hook actuate? Replace Door Assembly.

Check the DOOR SWITCH

ASSEMBLY Connector and
Is there clicking sound once or twice when the
MAIN PWB ASSEMBLY
START/PAUSE button is pressed to start the cycle?
[Black(1), Brown/Yellow(2)].

Is DOOR SWITCH ASSEMBLY broken? Replace the DOOR

SWITCH ASSEMBLY.
24
9. DISASSEMBLY INSTRUCTIONS
Disassemble and repair the parts after pulling out power cord from the outlet.

CONTROL PANEL

PLATE ASSEMBLY(TOP)
Unscrew the screws on the top plate.
The plate assembly(Top) is pulled back and
then upward to arrow direction.
The cover(Inner) is disassembled.

Pull out the drawer and unscrew 2 screws.

Lift the side the Control Panel Assembly and pull it out

DRAWER PANEL ASSEMBLY

Two screws is unscrewed.

Push out PANEL ASSEMBLY,CONTROL after Push
the hook below.

PANEL ASSEMBLY, CONTROL

The PWB assembly(Display) is disconnected.

PWB ASSEMBLY
(DISPLAY) When 7 screws are unscrewed on the PWB
insulator and the PWB assembly(Display) is
disassembled from the PWB insulator.

25
PWB ASSEMBLY(MAIN)

The back cover is removed.

One screw is unscrewed.
Pull the PWB assembly(Main) to arrow
direction
Two screws is unscrewed.
The cover of PWB assembly(Main) is
removed.
Disconnect connector from the wiring.

PWB ASSEMBLY(POWER)

The plate assembly(Top) disassembled.

The cover of PWB assembly(Power) is
removed.
(Push the hook bellow.)
Disconnect connector from the PWB.
Two screw is unscrewed.

DISPENSER ASSEMBLY

The plate assembly(Top) are disassembled.

Pull the drawer to arrow direction.
Two screws are unscrewed.

DRAWER

The hose clamps and the hose are

❋ Option disassembled.
The ventilation bellows are disassembled on
the tub.

Dispenser assembly

26
INLET VALVE

Disconnect the wiring connector.

2
1
Remove the valve by two screws of the valve
holder.
3
When reconnecting the connector
VALVE (PRE-WASH) WHITE/BLACK-BLACK
VALVE (NORMAL-WASH) GRAY/BLACK
VALVE (HOT) BLACK/WHITE

DOOR

Open the door completely.

Remove the three screws from the hinge.

When removing the Door Assembly, it is

necessary to hold the Bracket that is inner of
the Cabinet Cover.

Removing method of remained water

Pull it out from hose.

First, prepare a bucket to put in the remained
water.

CAP (REMAINING HOSE)

27
 The plate assembly(Top) is disassembled.
Pull out the drawer and unscrew 2 screws.
Lift the side the Control Panel Assembly and
pull it out

Two screws is unscrewed.

Push out PANEL ASSEMBLY,CONTROL after Push
the hook( ) below.

PANEL ASSEMBLY, CONTROL

Unscrew the screws from the lower cover.

The cabinet cover clamp is removed by special jig for

service and the gasket is released.

Two screws are unscrewed.

Unscrew all the screws on the upper and lower sides

of the CABINET COVER.

28
 Lift and separate the cabinet cover.

NOTE: When assembling the CABINET

COVER, connect the Door S/W connector.

SWITCH ASSY, DOOR LOCK

The cabinet cover clamp is removed and the

gasket is released.
Two screws are unscrewed.
The Door Lock S/W is disconnected form the
wiring connector and the strap.

29
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER

Remove the back cover.

Rotor
After loosening the bolt, Rotor, pull out the
Bolt rotor.

(ROTOR ASSEMBLY)

Remove the 6 bolt from the stator.

Disconnect the 2 connectors.

(STATOR ASSEMBLY)

Remove the hinges (Damper) at the Tub.

HOW
The TO ASSEMBLE
Hinge(Damper) THE
at the MOTOR
base is pulled off
Hinge pressing on the snaps at the sharp end.
(Damper)
The hinge at the base is pulled off.
Friction
Damper (To arrow direction)
(FRICTION DAMPER)

30
 PUMP
Remove pump outlet hose.
Remove tub pump bellows.
Remove cap(Remaining Hose).
Disconnect the wiring.
Three screws are unscrewed from the cabinet.
Remove the pump to arrow direction.

HEATER
Loosen the nut.
Remove washing heater by pulling out.

Washing
Heater
Wire Color:Red Wire Color:
Yellow
Nut Ring Terminal

When assembling the washing heater, insert

the heater to heater clip on the bottom of tub
and check the position of wire color.

31
WHEN FOREIGN OBJECT STUCK BETWEEN DRUM AND TUB

Remove washing heater.

Remove the foreign object(wire,coin,etc) by
inserting long bar in the hole.

SWITCH ASSEMBLY, SAFETY

Unscrew 4 screws from the back cover.

Disconnect the wiring connector.

First, Press hook and turn the safety switch
assembly switch assembly safety.

32
10. EXPLODED VIEW AND PART LIST
10-1.THE PART LIST OF CABINET ASSEMBLY

A154
A140

A110
A106

A102
A153 A103
A104
A152
A151

A150
A101

A141

A131

A100

A130 A430

A440

A134

A410

A135
A300 A455
A133
A310 A450
A303

A200

A201

A275
A220
A276
A460

33
10-2 THE EXPLODED VIEW OF CONTROL PANEL &
DISPENSER ASSEMBLY
F300
F462 F321

F170

F160
F340

F432
F330

F225
F430

F220

F441

F120

F215

F110

F216

F210

34
10-3 THE EXPLODED VIEW OF DRUM & TUB ASSEMBLY
K351 K350 K360 K143

K123

F140

K411
K121 K122
M105
K410
K125

F320
K320
K111
F310
F466
K110

K141
F464

K140
K105

K115 K410

K130

K135
K610

K510

K611
K530
K560 K512
K131
K572
K571
K340 F468

F467
K570

K550

K342 K346 K344 F145 K520 F461 K540

35
10-4. THE EXPLODED VIEW OF DRYER

M100

M130 M240

M120
M111

M110

M230 M216

M210

M215

M101
M140

M220

50