Sdai - Globalfire - Octo+ Large - Central de Incêndio 10 Laços

OCTO+ LARGE
1-12 LOOP FIRE ALARM

CONTROL PANEL
EN54-2 and EN54-4

1328-CPR-0236
CERTIFIED
The OCTO+ Fire Alarm Control Panel is built on the pedigree of the worldwide known JUNO NET. Now featuring an advanced full
peer-to-peer, multi-master networking solution. This new “Chameleon Network” solution enables extreme resilience in very large
distributed systems.
On a Chameleon Network system, each network NODE has, in its internal configuration memory, the whole system information, i.e. in
the unlikely event of a communication loss, there is no performance degradation of individual NODE functions.
The network layout is usually configured in a closed loop or having physical multi-paths for communications redundancy, which can
use either RS422 or Fibre-Optic mediums. It can also use Ethernet interfaces which can use the existing networking infrastructure.
A Chameleon Network can accommodate up to 32 NODE+ units. Each OCTO+ Large box can support from 1 to 12 addressable loops
giving a total of 128 loops in a single system! Naturally, it also supports remote access with our proprietary ODYSSEY Graphics
Interface, as well as integration with third party Building Management Systems through a Modbus output.
The graphic backlit LCD display accommodates any type of custom characters or graphic symbols, allowing multi-language support, as
well as pictorial and customisable elements.
Housed in a large aluminum back box, it comprises a PSU, a Front End Display for visualisation of the C&I equipment status, a NODE+
unit with the loop card fitted and networking interfaces if necessary. In this cabinet there is enough space for a total of 2 x 24VDC 12
Ah Sealed Lead Acid backup batteries, more than enough to provide up to 72 H battery supply to the NODE+ and ZEOS associated
devices which boast extremely low current consumption (use our LOOP & BATTERY CALCULATOR software, available free of charge via
our website).
The “Cause and Effect” programming as well as customer specific Configurations, can be uploaded to the panel using the CHAMELEON
CONNECTOR software tool. This is done by USB connection. Later the updated panel can broadcast the same configuration to all other
Chameleon Network panels.
● Expandable from 1 to 12 loops

● Connection to the repeater panels via RS422, Fibre-Optic or TCP/IP Chameleon interfaces
● Maximum 125 devices per loop (500 devices per Node)
● Up to 95 VULCAN 2 (addressable) ultra low current base sounders (32 address limit) per loop
● 32 individually programmable sounder addresses per loop
● Full Self-Addressing Device support
© 210414
Global Fire Equipment SA
Sitio dos Barrabés, Armazém Nave Y, Caixa Postal 908-Z
8150-016 São Brás de Alportel PORTUGAL
Telephone: (00351) 289 896 560 / Email: info@globalfire-equipment.com / Web: www.globalfire-equipment.com
● Max. 6 Fire output relays (change-over) and 3 Fault relay (NC)
● Max. 6 conventional alarm outputs (individually programmable)
● Fully monitored loops for high integrity OC / SC
● 384 fully programmable zones across all loops
● 512 fully programmable sounder groups, across all loops
● 512 I/O groups across all loops
● Built-in printer (optional)
● Available with ZEOS digital protocol
● Compatible with all ancillary modules
● Programming by integrated tactile keypad or Connected PC software (WIN & MAC compatible)
● Multiple language support (menu selectable)
● Optional Integrated 128 LED fire zone indications (available in blocks of 64 LEDs)
● Installer friendly Auto-learn facility.
POWER SUPPLY RATING 90V AC to 230V AC

PRIMARY DC SUPPLY 28.5V DC @ 7.5 A (Max.) / 28.5V DC @ 10 A (Max.)
SECONDARY SUPPLY 21.6V DC Min. - 27.2V DC Max. - Battery charger: 27.5V DC
BATTERIES (INTERNAL) 2 x 24V 12 AH (Max.)
QUIESCENT CURRENT (NO DEVICES) 75mA / 125mA/ 175mA (4, 8 and 12 Loops)
AUX POWER OUTPUT 24V DC: 900 mA total (300 mA each NODE, having up to 3 switched outputs)
MAXIMUM LOOP OUTPUT CURRENT 4 to 12 loops - Max. 165 mA per loop quiescent / Max. 900mA per loop peak
LOOP TOPOLOGY Class A or B
DETECTOR CABLE Firetuf 2 x 1,5 / max 2,000 m or 2 x 2,5mm / max 3,000m
CONVENTIONAL SOUNDER CIRCUITS up to 6 500 mA Max. current drive for both circuits - Fully monitored
AUX. RELAYS FIRE up to 6 rated 2A @ 30V DC resistive / 0.5A @ 120V AC resistive / 0.25A @ 240V AC resistive
AUX. RELAY FAULT up to 3 rated 2A @ 30V DC resistive / 0.5A @ 120V AC resistive / 0.25A @ 240V AC resistive
GRAPHICAL LCD DISPLAY 240x64 pixels blue backlit
ZONE LEDS Maximum 128 Zone LED / blocks of 64 LED
COMMUNICATION CHANNELS 3x configurable communication ports and per each NODE
BMS OUTPUT ODYSSEY (Graphical software), TCP IP-WEB (remote web monitoring), MODBUS RTU, ESPA 4.4.4
SOFTWARE CONNECTION USB type B
EVENT LOG 10,000 messages
OPERATING / STORAGE TEMPERATURE -10ºC to 50ºC
HUMIDITY Max. 85% RH Non-Condensing
PROTECTION IP30
DIMENSIONS 610 (L) x 420 (H) x 179,1 (W) mm
WEIGHT 6,1Kg (no batteries)
COLOUR White (RAL 9003) or Red (RAL 3001)
© 210414
OCTO+ 0Loop PSU 2.4
OCTO+ 1Loop PSU 2.4
OCTO+ 2Loops PSU 2.4
OCTO+ 4Loops LB PSU 7.5A
OCTO+ 5Loops PSU 7.A
OCTO+ 6Loops PSU 7.5A
OCTO+ 9Loops PSU 10A
© 210414

Sdai - Globalfire - Octo+ Large - Central de Incêndio 10 Laços

Uploaded by

Copyright:

Available Formats

Sdai - Globalfire - Octo+ Large - Central de Incêndio 10 Laços

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sdai - Globalfire - Octo+ Large - Central de Incêndio 10 Laços

Uploaded by

Copyright:

Available Formats

OCTO+ LARGE

1-12 LOOP FIRE ALARM

EN54-2 and EN54-4

● Expandable from 1 to 12 loops

POWER SUPPLY RATING 90V AC to 230V AC

OCTO+ 1Loop PSU 2.4

OCTO+ 2Loops PSU 2.4

OCTO+ 3Loops PSU 2.4

OCTO+ 4Loops PSU 2.4

OCTO+ 4Loops LB PSU 7.5A

OCTO+ 5Loops PSU 7.A

OCTO+ 6Loops PSU 7.5A

OCTO+ 7Loops PSU 7.5A

OCTO+ 8Loops PSU 7.5A

OCTO+ 9Loops PSU 10A

OCTO+ 10Loops PSU 10A

OCTO+ 11Loops PSU 10A

OCTO+ 12Loops PSU 10A

You might also like