800 10686

Quad Band 65 Degree Antenna

• X-polarized (+45° and -45°).

• UV resistant fiberglass radomes.
• Wideband vector dipole technology.
• DC Grounded metallic parts for impulse suppression.

General specifications:
Frequency range 790–960 MHz // 1710–1880 MHz //
1920–2170MHz // 2490–2690 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Connector 8 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dB (790–960 MHz)
>28 dB (1710–2690 MHz)
intersystem >30 dB (1710–1880 // 1920–2170 MHz)
>35 dB (790–960 // 1710–2170 MHz)
>38 dB (2490–2690 // 790–960 to 1710–2170 MHz)
See reverse for order information.

Specifications: 790–862 MHz 824–896 MHz 880–960 MHz

Average gain (dBi) tilt 0.5° 5° 9.5° 0.5° 5° 9.5° 0.5° 5° 9.5°
16.8 16.7 16.5 17 17 16.8 17.1 17.2 17
Front-to-back ratio (180±30°) >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar)
Maximum input power 500 watts (per input)
(at 50°C) 1000 watts (total power)
+45° and -45° polarization 68° (half-power) 67° (half-power) 65° (half-power)
horizontal beamwidth
+45° and -45° polarization 7.5° (half-power) 7.4° (half-power) 7.1° (half-power)
vertical beamwidth
Electrical downtilt 0.5°–9.5° 0.5°–9.5° 0.5°–9.5°
continuously adjustable
(manual or optional remote control) 790–960 +45°/–45° Polarization
Min. suppression for first 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0.5° 5° 9.5° T 125
67

sidelobe above main beam 18 16 14 dB 18 17 15 dB 18 18 16 dB

7.4°
Front-to-back ratio (copolar) >25 dB >25 dB >25 dB
Cross polar ratio (typical) 10 10

Main direction 0° 24 dB 23 dB 22 dB 3
dB

dB
Sector ±60° >10 dB >10 dB >10 dB Horizontal Pattern
3
Vertical Pattern
0°–10° electrical downtilt

Specifications: 1710–1880 MHz 1920–2170 MHz 2490–2690 MHz 1710 –1880 +45°/–45° Polarization
62°
120°
Average gain (dBi) tilt 0° 3° 6° 0° 3° 6° 0° 0° 3° 6°
4.8°
17.8 17.8 17.5 17.8 17.8 17.4 17.8 17.8 17.6
Front-to-back ratio >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar) 10 10

Maximum input power 200 watts (per input) 3

dB
dB

(at 50°C) 400 watts (total power) Horizontal Pattern Vertical Pattern
0°–6° electrical downtilt
±45° polarization 62° (half-power) 62° (half-power) 63° (half-power)
horizontal beamwidth 1920 –2170 +45°/–45° Polarization
62°
±45° polarization 4.8° (half-power) 4.4° (half-power) 3.5° (half-power) 120°
vertical beamwidth
4.4°
Electrical downtilt (continuously adjustable)
0°–6° 0°–6° 0°–6° 10 10

Min. suppression 0° 3° 6° T 0° 3° 6° T 0° 3° 6° T 3
dB

dB

3
for first sidelobe 18 16 16 dB 18 17 17 dB 18 18 18 dB Horizontal Pattern Vertical Pattern
above main beam 0°–6° electrical downtilt
Cross polar ratio (typical) 2490 –2690 +45°/–45° Polarization
Main direction 0° 18 dB 23 dB 25 dB 63°
Sector ±60° >10 dB >10 dB >10 dB 125°

3.5°

10 10

3
dB
dB

Horizontal Pattern Vertical Pattern

11422-A 0°–6° electrical downtilt
936.4091/a
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Fax: (541) 779-3991
Email: communications@kathrein.com Internet: www.kathrein-scala.com
 800 10686
Quad Band 65 Degree Antenna

Mechanical specifications:
Weight 75 lb (34 kg)
79.4 lb (36 kg) clamps included
Dimensions 103.2 x 11.8 x 6 inches
(2622 x 300 x 152 mm)
Wind load at 93 mph (150kph)
Front/Side/Rear 311 lbf / 117 lbf / 335 lbf
(1380 N) / (520 N) / (1490 N)
Mounting category H (Heavy)
Wind survival rating* 120 mph (200 kph)
Shipping dimensions 116.2 x 12.7 x 7.5 inches
(2951 x 322 x 190 mm)
Shipping weight 77.2 lb (35 kg)
Mounting Fixed mounts for 2 to 4.6 inch (50 to 115 mm)
OD masts are included.

2.625 inches ± 0.125

(68 mm ± 4)
64 mm
M8

2 x 738 546 Mounting Kit

(included) 106 inches
(2692 mm)
104.4 inches
Mounting Options: (2652 mm)
Model Description
103.2 inches
2 x 738 546 Mounting Kit for 2 to 4.6 inch (2622 mm)
(included) (50 to 115 mm) OD mast.
4.4 lb (2 kg)
850 10008 Tilt Mount Kit
0–10 degrees

6 inches
(152 mm)

11.8 inches
(300 mm)

1920–2170 1710–1880 1710–1880 1920–2170

–45° –45° +45° +45°

790–960 790–960 2490–2690 2490–2690

–45° +45° –45° +45°

Order Information: 7-16 7-16 7-16 7-16 7-16 7-16

Model Description 7-16 7-16
800 10692 Triple band antenna with mounting bracket
0.5°–9.5° // 0°–6° // 0°–6° // 0°–6° electrical downtilt * Mechanical design is based on environmental conditions as
stipulated in TIA-222-G-2 (December 2009) and/or ETS 300
019-1-4 which include the static mechanical load imposed on
an antenna by wind at maximum velocity. See the Engineering
Section of the catalog for further details.

All specifications are subject to change without notice. The latest specifications are available at www.kathrein-scala.com.
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Fax: (541) 779-3991
Email: communications@kathrein.com Internet: www.kathrein-scala.com