Nothing Special   »   [go: up one dir, main page]

MPTOOL Error Code List - N0109

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

MP-Tool Error Code List V 1.

07

MP-Tool
Error Code List

V1.07

Revision History

Document Date Revision Initials


Release
st
1.01 2013/04/24 1 version release (MP-Tool V 2.5.14. v7) Rose
1.02 2013/04/24 MP-Tool V 2.5.16 v7 Shawn
1.03 2013/05/09 MP-Tool V 2.5.19 v6 Shawn
1.04 2013/05/21 MP-Tool V 2.5.20 v4 Shawn
1.05 2013/06/17 MP-Tool V 2.5.22 v9 Shawn
1.06 2013/10/08 Rearrange Error Code(MP-Tool V 2.5.27 v9) Shawn
1.07 2013/10/09 MP-Tool V 2.5.28 v2 Shawn

1
MP-Tool Error Code List V 1.07

MP Stage Error Code List:


MPTOOL V 2.5.28 v2 2013/10/09 Error Code List
MP Error Code Description Memo
0x01 Pretest Fail It’s good MU not equal to
total MU.
0x02 Check Size Fail It’s flash size not equal to
specific value.
0x03 Write CID Fail CID pattern verify fail
0x04 Download ISP Fail ISP pattern verify fail
0x05 Copy Compare Fail There are some data not
match.
0x06 Format Fail MBR/PBR pattern verify fail.
0x07 Make AutoRun Fail ISO file write fail
0x08 Device Write Protect Device can’t access.
0x09 Preload Fail There is a compare or file not
found error when copy file
into UFD.
0x0A Write CID2 Fail CID2 pattern verify fail
0x0B Update WPRO fail Mutli-lun partition fail
0x0C Reset Fail Software reset CPU fail
0x0D Check Info Block Fail Check Info Block Fail (Before
Download ISP)
0x0F Initial Fail Initial parameter and
reference data fail
0x10 Error Bits Over Fail Error Bits Are Too Much
Over Threshold
0x11 Bad block over Setting Total bad block over the
BBOption.
0x12 Check Open/Short Fail Check Open/Short Fail
0x13 Pre-scan Early Bad Fail Pre-scan Early Bad Fail
0x14 Specific Bad Block Fail Specific Bad Block Fail
0x15 Check Data Shaping Fail Check Data Shaping Fail
0x16 Check USB Mode Fail USB1.1/2.0 checking fail.
0x17 Update SN After pass Fail The serial write fail
0x18 Check Spare Count Fail Count of spare block is less
0x19 Extern Serial Number EOF Serial Number in extern file is
Fail no more for using
0x1A Device Removed before Device off-line
pass/fail
0x1B Device new bad Device add new bad fail
0x1C Flash Can Not Support DDR Force DDR option usage
0x1D DDRTest.BIN Can Not Find Force DDR option usage
0x1E ConvertFlashID.BIN Can Not Convert Flash ID option
Find usage
0x1F Convert FlashID Fail Convert Flash ID option
usage
0x20 Check Windows To Go Size Check Windows To Go Size
Fail Fail
0x21 Check Windows To Go Check Windows To Go
2
MP-Tool Error Code List V 1.07

Format Fail Format Fail


0x22 Chip Not Support Windows Check Windows To Go
To Go (Accept SM326X device
Series)
0x23 Check Spare Block Fail (Size Check space block status
Is Zero)
0x24 Check Windows To Go Spare Check Windows To Go space
Size Fail block status.
0x25 Check Serial Number Length Check serial number length
Fail when user enables this option.
0x26 Cannot Find DLL When Specific DLL file not found
Enable Decode BCH Flag
0x27 Cannot Find Block When Enable decode bad block
Decode BCH option, but can’t find any
information data.
0x28 Detects HDD device, It HDD device without letter, it
Cannot Support NTFS Format cannot support NTFS format.
0x29 Prescan.BIN Can Not Find Pre-scan bad blocks option
usage
0x2A Pre-scan Bad Blocks Fail Pre-scan bad blocks option
usage
0x2B Change USB Speed Fail 326x change USB speed (U2 -
> U3 or U3 -> U2) fail
0x2C BadBitTable.bin or Remapping verify test usage
BadByteTable.bin or
ErrPage.bin Can Not Find
0x2D Remapping Flow Fail Remapping verify test usage
0x2E Device Over Current Device over current is
happened.
0x2F Device Not Find Device is not found.
0x30 Timeout Time out is happened.
0x31 Check flash ID doesn’t match. Check Flash ID is matched or
not(4bytes)
0x32 User stop MP User press stop procedure.
0x33 Erase Info Fail Erase system info fail
0x35 ECC U-Correctable Fail ECC U-Correctable Fail
0x36 Lock Content File Fail Can’t lock content files
0x37 No Response From Device, Device can’t find anymore.
Please Re-plug Device
0x38 Erase Good Error, Please Please select correction erase
Change to Erase All mode.
0x39 FAT32 Format Alignment Fail Format Alignment Fail
0x3A Read Hynix Read Retry OTP Read Hynix Read Retry OTP
Data Fail Data Fail
0x3B Check Card Mode Fail Check Card Mode Fail
0x3C Check All CEs Are Not Same Check All CEs Are Not Same
Fail Fail
0x3D Check Channel CE No Fail Check Channel CE No Fail
0x3E RAM Test Fail RAM Test Fail
0x3F Check CE Care Mode Fail Check CE Care Mode Fail

3
MP-Tool Error Code List V 1.07

0x40 CheckEraseStatus.bin Can Not Check block 0 & 1 erase


Find status usage
0x41 Check Erase Status Fail Check block 0 & 1 erase
status usage
New 0x42 Hardware SEL_C Value Fail Check hardware SEL_C value

4
MP-Tool Error Code List V 1.07

MPQC Stage Error Code List:


MPTOOL V 2.5.27 v9 2013/10/08 Error Code List
QC Error Code Description Memo
0x51 QC SCSISTR FAIL Check SCSI Vendor Error
0x52 QC PRONAME FAIL Check SCSI Product Error
0x53 QC CAPACITY FAIL Check Disk Capacity Error
0x54 QC ISPSTR FAIL Check ISP Version Error
0x55 QC VENDORSTR FAIL Check Vendor String Error
0x56 QC PRODUCTSTR FAIL Check Product String Error
0x57 QC VIDSTR FAIL Check VID Error
0x58 QC PIDSTR FAIL Check PID Error
0x59 QC USBMODE FAIL Check USB Mode Error
0x5A QC USBPOWER FAIL Check USB Power Error
0x5B QC TESTERSTR FAIL Check Tester Version Error
0x5C QC DBFMETHOD FAIL Check DBF Method Error
0x5D QC Check Disk Type FAIL Check Disk Type Error
0x5E QC ISP FAIL Check ISP Error
0x5F QC Check Disk Label FAIL Check Disk Label Error
0x60 QC Check Disk Format Check Disk Format Error
FAIL
0x61 QC Compare CID Fail Check CID buffer Error
0x62 QC Check Flash ID Fail Check Flash ID buffer Error
0x63 QC Check ISP Version Fail Check version of ISP Error
0x64 QC Compare CDROM Fail Compare data of CDROM
Error
0x66 QC CID Setting Fail Link block number is too large
0x67 QC Check Used Space Fail Check used space of formatted
device error.
0x68 QC Check Preload Fail Check Preload Non-FAT
(Non-FAT mode) Image Error
0x69 QC Check Preload Fail Check Preload FAT Files Error
(FAT mode)
0x6A QC Check Flash ID Fail Check Flash ID Error
0x6B QC Compare SN Header Fail Check Serial Number Header
Error
0x6C QC Compare SN Length Fail Check Serial Number Length
Error
0xFF No Device

You might also like