ACE Test Series
ACE Test Series
ACE Test Series
Grand Tests
18 18
(Subject Wise Tests + Multi-Subject Wise Tests)
Note:
★ The Syllabus considered as per Previoues year Notification of GATE. ACE Engineering Academy
does not take any responsibility for deviations in syllabus in the final exam.
★ The Dates of Tests may Change according to the GATE-2023 Exam schedule.
★ Tests will be activated at 06:00 pm on the scheduled day.
load test, standard penetration and cone penetration tests; Earth pressure theories -
Rankine and Coulomb; Stability of slopes – Finite and infinite slopes, Bishop’s method;
Test-04 Stress distribution in soils – Boussinesq’s theory; Pressure bulbs, Shallow foundations –
Terzaghi’s and Meyerhoff’s bearing capacity theories, effect of water table; Combined
footing and raft foundation; Contact pressure; Settlement analysis in sands and clays;
Deep foundations - dynamic and static formulae, Axial load capacity of piles in sands and
clays, pile load test, pile under lateral loading, pile group efficiency, negative skin friction.
ACE Engineering Academy
Date of
Test No Name of the Test
Activation
Structural Analysis-1:
Test-05 Statically determinate and indeterminate structures by force/ energy methods; Method
of superposition; Analysis of trusses, Arches, cables.
Structural Analysis-2
Analysis of Beams, and frames; Displacement methods: Slope deflection and moment
Test-06
distribution methods; Influence lines; Stiffness and flexibility methods of structural
analysis.
26-04-2022
Concrete Structures:
Test-07 Working stress and Limit state design concepts; Design of beams, slabs, columns; Bond
and development length; Prestressed concrete beams.
Steel Structures:
Working stress and Limit state design concepts; Design of tension and compression
Test-08 members, beams and beam- columns, column bases; Connections - simple and
eccentric, beam-column connections, plate girders and trusses; Concept of plastic
analysis - beams and frames.
Solid Mechanics-1:
Simple stress and strain relationships, Complex Stresses and Strains, Bending moment
Test-09
and shear force in statically determinate beams; Deflections & Slopes, buckling of
column, combined and direct bending stresses
Solid Mechanics-2:
Test-10 Simple bending theory, flexural and shear stresses, shear centre; Uniform torsion,
Moment of Inertia.
Fluid Mechanics: Properties of fluids, fluid statics; Continuity, momentum and energy 03-05-2022
equations and their applications; Potential flow, Laminar and turbulent flow; Flow in
Test-11
pipes, pipe networks;
Concept of boundary layer and its growth; Concept of lift and drag.
Hydrology:
Hydrologic cycle, precipitation, evaporation, evapo-transpiration, watershed, infiltration,
Test-13 unit hydrographs, hydrograph analysis, flood estimation and routing, reservoir capacity,
surface run-off models, ground water hydrology - steady state well hydraulics and
aquifers; Application of Darcy’s law. 10-05-2022
Irrigation:
Types of irrigation systems and methods; Crop water requirements - Duty, delta, evapo-
Test-14
transpiration; Gravity Dams and Spillways; Lined and unlined canals, Design of weirs on
permeable foundation; cross drainage structures.
ACE Engineering Academy
Date of
Test No Name of the Test
Activation
Environmental Engineering-1:
Water and Waste Water Quality and Treatment: Basics of water quality standards –
Test-15
Physical, chemical and biological parameters; Water quality index; Unit processes and
operations; Water requirement; Water distribution system; Drinking water treatment.
Environmental Engineering-2:
Water and Waste Water Quality and Treatment: Sewerage system design, quantity of 17-05-2022
domestic wastewater, primary and secondary treatment. Effluent discharge standards;
Sludge disposal; Reuse of treated sewage for different applications.
Test-16 Air Pollution: Types of pollutants, their sources and impacts, air pollution control, air
quality standards, Air quality Index and limits.
Municipal Solid Wastes: Characteristics, generation, collection and transportation of
solid wastes, engineered systems for solid waste management (reuse/ recycle, energy
recovery, treatment and disposal).
Transportation Engineering-1:
Transportation Infrastructure: Geometric design of highways - cross-sectional elements,
sight distances, horizontal and vertical alignments. Geometric design of railway Track –
Speed and Cant. Concept of airport runway length, calculations and corrections; taxiway
Test-17
and exit taxiway design.
Highway Pavements: Highway materials - desirable properties and tests; Desirable
properties of bituminous
paving mixes; 24-05-2022
Transportation Engineering-2:
Highway Pavements: Design factors for flexible and rigid pavements; Design of flexible
and rigid pavement using IRC codes.
Traffic Engineering: Traffic studies on flow and speed, peak hour factor, accident study,
Test-18
statistical analysis of
traffic data; Microscopic and macroscopic parameters of traffic flow, fundamental
relationships; Traffic signs;
Signal design by Webster’s method; Types of intersections; Highway capacity
Geomatics Engineering:
Principles of surveying; Errors and their adjustment; Maps - scale, coordinate system;
Test-19 Distance and angle measurement - Levelling and trigonometric levelling; Traversing and
triangulation survey; Total station; Horizontal and vertical curves. Photogrammetry and
Remote Sensing - Scale, flying height; Basics of remote sensing and GIS.
Engineering Mechanics:
System of forces, free-body diagrams, equilibrium equations; Internal forces in
Test-20 31-05-2022
structures; Friction and its applications; Centre of mass; Free vibration of undamped
SDOF system.
ACE Engineering Academy
Date of
Test No Name of the Test
Activation
Verbal Ability:
Basic English grammar: tenses, articles, adjectives, prepositions, conjunctions, verb-noun
Test-22 agreement, and other parts of speech.
Basic vocabulary: words, idioms, and phrases in context. Reading and comprehension.
Narrative sequencing.
Quantitative Aptitude:
Data interpretation: data graphs (bar graphs, pie charts, and other graphs representing
data), 2- and 3-dimensional plots, maps, and tables.
Test-23 07-06-2022
Numerical computation and estimation: ratios, percentages, powers, exponents and
logarithms, permutations and combinations, and series.
Mensuration and geometry. Elementary statistics and probability.
Analytical Aptitude:
Logic: deduction and induction, Analogy, Numerical relations and reasoning
Spatial Aptitude:
Test-24
Transformation of shapes: translation, rotation, scaling, mirroring, assembling, and
grouping
Paper folding, cutting, and patterns in 2 and 3 dimensions
Test-45 Construction Materials and CPM, Concrete Structures and Steel Structures
18-10-2022
Test-46 Hydrology, Irrigation and Environmental engineering
14-03-2022
and Continuous, Poisson and Normal Distribution; Linear regression.
Numerical Methods: Error analysis. Numerical solutions of linear and non-linear algebraic
equations; Newton’s and Lagrange polynomials; numerical differentiation; Integration by
trapezoidal and Simpson’s rule; Single and multi-step methods for first order differential
equations.
Geotechnical Engineering-1:
Soil Mechanics: Three-phase system and phase relationships, index properties; Unified
and Indian standard soil classification system; Permeability - one dimensional flow,
Seepage through soils – two - dimensional flow, flow nets, uplift pressure, piping,
Test-03
capillarity, seepage force; Principle of effective stress and quicksand condition;
Compaction of soils; One- dimensional consolidation, time rate of consolidation; Shear
Strength, Mohr’s circle, effective and total shear strength parameters, Stress-Strain
characteristics of clays and sand; Stress paths.
Geotechnical Engineering-2:
Foundation Engineering: Sub-surface investigations - Drilling bore holes, sampling, plate
load test, standard penetration and cone penetration tests; Earth pressure theories -
Rankine and Coulomb; Stability of slopes – Finite and infinite slopes, Bishop’s method;
Test-04 Stress distribution in soils – Boussinesq’s theory; Pressure bulbs, Shallow foundations –
Terzaghi’s and Meyerhoff’s bearing capacity theories, effect of water table; Combined
footing and raft foundation; Contact pressure; Settlement analysis in sands and clays;
Deep foundations - dynamic and static formulae, Axial load capacity of piles in sands and
clays, pile load test, pile under lateral loading, pile group efficiency, negative skin friction.
ACE Engineering Academy
Date of
Test No Name of the Test
Activation
Structural Analysis-1:
Test-05 Statically determinate and indeterminate structures by force/ energy methods; Method
of superposition; Analysis of trusses, Arches, cables.
Structural Analysis-2
Analysis of Beams, and frames; Displacement methods: Slope deflection and moment
Test-06
distribution methods; Influence lines; Stiffness and flexibility methods of structural
analysis.
Concrete Structures:
Test-07 Working stress and Limit state design concepts; Design of beams, slabs, columns; Bond
and development length; Prestressed concrete beams.
Steel Structures:
Working stress and Limit state design concepts; Design of tension and compression
Test-08 members, beams and beam- columns, column bases; Connections - simple and eccentric,
beam-column connections, plate girders and trusses; Concept of plastic analysis - beams
and frames.
14-03-2022
Solid Mechanics-1:
Simple stress and strain relationships, Complex Stresses and Strains, Bending moment
Test-09
and shear force in statically determinate beams; Deflections & Slopes, buckling of
column, combined and direct bending stresses
Solid Mechanics-2:
Test-10 Simple bending theory, flexural and shear stresses, shear centre; Uniform torsion,
Moment of Inertia.
Fluid Mechanics: Properties of fluids, fluid statics; Continuity, momentum and energy
equations and their applications; Potential flow, Laminar and turbulent flow; Flow in
Test-11
pipes, pipe networks;
Concept of boundary layer and its growth; Concept of lift and drag.
Hydrology:
Hydrologic cycle, precipitation, evaporation, evapo-transpiration, watershed, infiltration,
Test-13 unit hydrographs, hydrograph analysis, flood estimation and routing, reservoir capacity,
surface run-off models, ground water hydrology - steady state well hydraulics and
aquifers; Application of Darcy’s law.
Irrigation:
Types of irrigation systems and methods; Crop water requirements - Duty, delta, evapo-
Test-14
transpiration; Gravity Dams and Spillways; Lined and unlined canals, Design of weirs on
permeable foundation; cross drainage structures.
ACE Engineering Academy
Date of
Test No Name of the Test
Activation
Environmental Engineering-1:
Water and Waste Water Quality and Treatment: Basics of water quality standards –
Test-15
Physical, chemical and biological parameters; Water quality index; Unit processes and
operations; Water requirement; Water distribution system; Drinking water treatment.
Environmental Engineering-2:
Water and Waste Water Quality and Treatment: Sewerage system design, quantity of
domestic wastewater, primary and secondary treatment. Effluent discharge standards;
Sludge disposal; Reuse of treated sewage for different applications.
Test-16 Air Pollution: Types of pollutants, their sources and impacts, air pollution control, air
quality standards, Air quality Index and limits.
Municipal Solid Wastes: Characteristics, generation, collection and transportation of
solid wastes, engineered systems for solid waste management (reuse/ recycle, energy
recovery, treatment and disposal).
Transportation Engineering-1:
14-03-2022
Transportation Infrastructure: Geometric design of highways - cross-sectional elements,
sight distances, horizontal and vertical alignments. Geometric design of railway Track –
Speed and Cant. Concept of airport runway length, calculations and corrections; taxiway
Test-17
and exit taxiway design.
Highway Pavements: Highway materials - desirable properties and tests; Desirable
properties of bituminous
paving mixes;
Transportation Engineering-2:
Highway Pavements: Design factors for flexible and rigid pavements; Design of flexible
and rigid pavement using IRC codes.
Traffic Engineering: Traffic studies on flow and speed, peak hour factor, accident study,
Test-18
statistical analysis of
traffic data; Microscopic and macroscopic parameters of traffic flow, fundamental
relationships; Traffic signs;
Signal design by Webster’s method; Types of intersections; Highway capacity
Geomatics Engineering:
Principles of surveying; Errors and their adjustment; Maps - scale, coordinate system;
Test-19 Distance and angle measurement - Levelling and trigonometric levelling; Traversing and
triangulation survey; Total station; Horizontal and vertical curves. Photogrammetry and
Remote Sensing - Scale, flying height; Basics of remote sensing and GIS.
Engineering Mechanics:
System of forces, free-body diagrams, equilibrium equations; Internal forces in
Test-20
structures; Friction and its applications; Centre of mass; Free vibration of undamped
SDOF system.
ACE Engineering Academy
Date of
Test No Name of the Test
Activation
Verbal Ability:
14-03-2022
Basic English grammar: tenses, articles, adjectives, prepositions, conjunctions, verb-noun
Test-22 agreement, and other parts of speech.
Basic vocabulary: words, idioms, and phrases in context. Reading and comprehension.
Narrative sequencing.
Quantitative Aptitude:
Data interpretation: data graphs (bar graphs, pie charts, and other graphs representing
data), 2- and 3-dimensional plots, maps, and tables.
Test-23
Numerical computation and estimation: ratios, percentages, powers, exponents and
logarithms, permutations and combinations, and series.
Mensuration and geometry. Elementary statistics and probability.
Analytical Aptitude:
Logic: deduction and induction, Analogy, Numerical relations and reasoning
Spatial Aptitude:
Test-24
Transformation of shapes: translation, rotation, scaling, mirroring, assembling, and
grouping
Paper folding, cutting, and patterns in 2 and 3 dimensions
20-03-2022
Test-38 Geotechnical Engineering and Fluid Mechanics and Hydraulics
Test-39 Construction Materials and CPM, Concrete Structures and Steel Structures
01-04-2022
Test-47 Full Length Mock Test-5