AC1410 AC1410: 1410 1410 kVA kVA / 1128 KW / 1128 KW
AC1410 AC1410: 1410 1410 kVA kVA / 1128 KW / 1128 KW
AC1410 AC1410: 1410 1410 kVA kVA / 1128 KW / 1128 KW
POWERED by CUMMINS
AC1410
MODEL AC1410
kVA 1410
Standby
Power kW 1128
Pf. 0.8 kVA 1280
Prime
kW 1024
Standby : Continuous running at variable load for duration of an emergency. No overload is permitted on these ratings. In accordance with ISO 3046 .
Prime : Continuous running at variable load for unlimited periods with 10% overload available for 1 hour in any 12 hour period. In accordance with ISO 8528,ISO 3046.
Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories without prior notice.
ENGINE
CUMMINS
Model KTA50G3
Engine Power Output kWm 1227
at rated rpm HP 1645
Aspiration and Cooling Turbocharged&Aftercooled
Total Displacement Litre 50.3
No. of Cylinders and Build 16 V
E i Speed
Engine S d rpm 1500
Bore and Stroke mmxmm 159x159
Compression Ratio 13.9:1
Governor Electronic
Fuel Consumption at full load L/hr 261
Fuel Tank Capacity Litre N/A
Oil Capacity Litre 177
C l t Capacity
Coolant C it Lit
Litre 340
Radiator Cooling Air m³/min 1296
Air Intake – Engine m³/min 96.3
Exhaust Gas Flow m³/min 231
9 Heavy duty Cummins diesel engine 9 Cooling radiator and fan
9 Four stroke, water cooled, turbocharged & aftercooled 9 Starter battery (with lead acid) including Rack and Cables
9 Direct injection fuel system 9 Flexible fuel connection hoses and manual oil sump
9 Electronic Governor system drain valve
9 12/24 V D.C. starter and charge alternator 9 Industrial capacity exhaust silencer and steel bellows
9 Replaceable fuel filter, oil filter and dry element air filter 9 Jacket water heater(at automatic models)
9 Operation manuals and circuit diagram documents
ALTERNATOR
Design Brushless single bearing, revolving field
Stator 2/3 p
pitch
Rotor Single bearing, flexible disc
Insulation System Class H
Standard Temperature Rise 125 - 163°C Continuous
Exciter Type Self Excited
Phase Rotation A (U), B (V), C (W)
Alternator Cooling Direct drive centrifugal blower fan
No load < 11.5%.
5% Non distorting balanced
AC Waveform Total Harmonic Distortion
linear load < 5%
Telephone Influence Factor (TIF) <50 per NEMA MG1-22.43
Telephone Harmonic Factor (THF) <2%
9 Brushless, single bearing system, flexible disc, 4 poles 9 Impregnation with tropicalised epoxy varnish
9 Insulation class H 9 Solid state Automatic Voltage Regulator
9 Standard degree of protection IP21 (*IP22/IP23 is availab.) 9 Stator winding with 2/3 pitch for improved harmonics
9 Self-exciting and self-regulating
CONTROL SYSTEM
Control supervision and protection panel is mounted on the genset base frame.
The control panel is equipped as follows:
OPTIONAL EQUIPMENTS
Dlesel Englne
9 Oil heater Accessories
9 Bulk fuel tank
Altemator 9 Automatic filling system
9 3/4 Pole Output Circuit Breaker 9 Fuel-water separator filter
9 Anti-condensation
A ti d ti Heater
H t 9 Low fuel level alarm
9 Residential silencer
Panel 9 Enclosure or sound proof canopy
9 Charge ammeter 9 Trailer
9 Transfer Switch 3 Pole 9 Manual oil drain pump
9 Transfer Switch 4 Pole 9 Tool kit for maintenance
9 Earth Fault ,single set
CHASSIS
9 The complete gen-set is mounted as whole on a heavy-duty fabricated, steel base frame
9 Anti-vibration pads are fixed between the engine/ alternator feet and the base frame
9 Base frame design incorporates an integral fuel tank (Up to 750 kVA)
9 The generating set can be lifted or carefully pushed / pulled by the base frame
9 Dial type fuel gauge and drain plug on the fuel tank
9 Forklift pockets within base frame (up to 500kVA)
DIMENSIONS
OPEN TYPE
DIMENSIONS (LxWxH)
( W H) mm 4900x1780x2380
4900 1 80 2380
DRY WEIGHT kg 9400
SOUND ATTENUATED TYPE
DIMENSIONS (LxWxH) mm N/A
DRY WEIGHT kg N/A
CANOPY
L
9 All canopy parts are designed with modular principles 9 Exhaust silencer is protected against environment influences
9 Without welding assembly 9 Thermally insulated engine exhaust system
9 Doors on each side 9 Emergency stop push button is installed outside of the canopy
9 All metal canopy parts are painted by electrostatic 9 Easy lifting and moving
polyester powder paint 9 Easy maintenance and operation