TDS - Masterflow 885
TDS - Masterflow 885
TDS - Masterflow 885
MASTERFLOW 885
High strength metallic aggregate reinforced non-shrink, non-catalysed grout with load bearing
properties
Placing:
Lengths of metal strapping laid in the formwork
prior to placing may be necessary to assist grout
flow over large areas and in compacting and
eliminating air pockets. Pour the grout
continuously. Maintain a constant hydrostatic
head, preferably of at least 15 cm.
On the opposite side allow 5-10 cm clearance Diagram A illustrates the use of grout surcharge to
between the formwork and the base plate. ensure complete filling under a base.
Diagram B shows that straps can be used to aid
Shoulders grout flow under a wider base. A gentle “sawing”
Due to differences in temperature between the
®
MASTERFLOW 885
action with the strap allows the grout to flow For additional information on MASTERFLOW® 885
without segregation for greater distances. grout or other non-shrink grouting materials,
contact your BASF representative.
*Estimating data
Approximate yield (m³ per 25kg bag) Safety precautions
Consistency Fluid Flowable Plastic Damp pack As with other products containing Portland
Temp. 25°C 0.0117 0.0115 0.0110 0.0105
cement, the cementitious material in
MASTERFLOW® 885 grout may cause irritation.
Water demand*
Avoid contact with the eyes and prolonged
Actual water demand will depend on consistency
irritation. In case of contact with the eyes,
required and the temperatures (both ambient and
immediately flush with plenty of water for at least
grout). Do not use too much water as it will cause
15 minutes. Call a physician. In case of contact
grout to bleed or segregate.
with skin, wash skin thoroughly.
Whilst any information contained herein is true, accurate and represents our best knowledge and experience, no warranty is given or implied with
any recommendations made by us, our representatives or distributors, as the conditions of use and the competence of any labour involved in the
application are beyond our control.
As all BASF technical datasheets are updated on a regular basis it is the user's responsibility to obtain the most recent issue.