Lot Detail

Lot No. : Bag/NDR/OTM/Sluice/W-02/2021-22

Repair & Maintanence of Sluice/Regulator of Kashubpur 10- Vent Boatpass,km17.200, Regulator (S-14), Km 20.500
Lot Description Bhatshala 1-Vent Boatpass Regulator (S-15), at Km 23.100, Kundula 3-Vent Boatpass Regulator , Bishkhali 7-Vent
: Boatpass Regulator, Fulbari DS-2 Sluice , Rahimabad 1-Vent Sluice under Doiboggohati sub-project and polder no 34/1
in Bagerhat District (NDR Budget) under Bagerhat O&M Division, BWDB,Bagerhat during the year 2021-22

Section 6. Bill of Quantities

Bill of Quantities

Table
Bill of Quantities
Name :
Unit Total Total
Item
Item Code Measurement Unit Price (In figures: Price Price Price
no. Group (if Description of Item Unit Quantity BDT) (In (In (In
any) words: figures: words:
BDT) BDT) BDT)
1 16- 16- Back filling in hydraulic structures cum 243.04
560 560- including all leads and lifts with
10 sand in 150mm layer including
watering, ramming, compacting to
30% relative density etc. complete
by compactor or any other suitable
method as per direction of
Engineer in charge.

Sand of FM>=0.50
2 16- 16- Earth work in removal of slushy cum 57.60
480 480 earth, including all leads and lifts
form the bed of the sluices or any
other places, in accordance with
specification (prior permission from
the Executive Engineer has to be
taken before execution of the work
regarding necessity and quantity of
work) as per direction of Engineer
in charge.
3 76- 76- Manufacturing & Supplying of M.S. Each 6
250 250- Flap Gate shutter of 8mm
40 thickM.S. skin plate and stiffener
with minimum
75mmx75mmx10mmM.S. angle as
frame, horizontal & vertical
beams,100mmx45mmx16mm P-
type rubber seal, fixed with 10mm
dia x63.5mm M.S. counter sink and
hax. nuts & bolts and
40mmx10mmM.S. strip as clamp
drilled spaces @ 150mm c/c hinge
assy with gateand wall bracket, link
arm of 19mm thick M.S. plate, 4
nos 25mm diax 150mm stainless
steel hinge pin with proper thread,
nut, cotter pinand washer as per
approved design including the cost
of all materialsof proper grade &
brand new with a prime coat of
redoxide wherenecessary as per
specification and direction of
Engineer in charge.

Size 1.95m x 1.65m.

4 76- 76- Manufacturing & Supplying of M.S. each 2
240 240- Vertical Lift Gate shutter of 8mm
40 thick M.S. skin plate and stiffener
with minimum 75mmx75mmx10mm
M.S. angle as frame, horizontal &
vertical beam, 75mmx25mmx12mm
P-type rubber seal, fixed with
 10mm dia x 63.5mm M.S. counter
shank bolts with nuts and
40mmx10mm M.S. strip as clamp
drilled spaces @ 150mm c/c, stem
attachment with proper thread, nut,
cotter pin and washer as per
approved design including the cost
of all materials of proper grade &
brand new with a prime coat of
redoxide where necessary as per
specification and direction of
Engineer in charge.
Size 1.95m x 1.65m
5 76- 76- Manufacturing, supplying and each 1
190 190 Installation of Padestal type
liftingdevice for slide gate with
63mm dia threaded steel shaft,
146mm outerdia bronze nut, thrust
bearing, steel bevel gear etc. as
per approveddesign including
supply of allcomponents, labours
with a prime coatof redoxide where
necessary etc. complete including
the cost of allmaterials as per
specification and direction of
Engineer in charge.
6 76- 76- Labour charge for fitting and fixing each 3
260 260- of M.S. vertical lift gate/ flap gate
20 shutters of different size including
making holes in concrete for
hooking arrangements with supply
of necessary materials, tools and
other accessories required for
fitting the same to regulator/sluice
and mending the damages with CC
(1:2:4), removing the spoils etc.
complete including the cost of all
materials as per direction of
Engineer in charge.
Large size: 1.95 m x 1.65 m or
1.95 m x 1.35 m
7 76- 76- Manufacturing & Supplying of M.S. Each 1
240 240- Vertical Lift Gate shutter of
20 8mmthick M.S. skin plate and
stiffener with
minimum75mmx75mmx10mm M.S.
angle as frame, horizontal &
verticalbeam, 75mmx25mmx12mm
P-type rubber seal, fixed with
10mm diax 63.5mm M.S. counter
shank bolts with nuts and
40mmx10mm M.S.strip as clamp
drilled spaces @ 150mm c/c, stem
attachment withproper thread, nut,
cotter pin and washer as per
approved designincluding the cost
of all materials of proper grade &
brand new with aprime coat of
redoxide where necessary as per
specification anddirection of
Engineer in charge.

Size 1.35m x 1.35m

8 76- 76- Labour charge for removal of Each 5
270 270- M.S.Gates and Hoists from all
10 types ofstructures with all leads
and lifts including hire charge of
boat, chainpulley, bamboo, ropes
etc. and refixing the same in original
level, lineand grade after painting
(excluding the cost of painting) as
perdirection of Engineer in charge.

Large size: 1.95 m x 1.65 m

9 28- 28- Reinforced Cement Concrete Work kg 1.30
140 140- in leanest mix. 1:2:4, with
10 20mmdown graded coarse
aggregates and sand of FM>1.8 to
FM<=2.5, toattain a minimum 28
days cylinder strength of 18.0
N/mm�,including breaking,
screening, grading, washing
aggregates with clearwater, mixing,
layinginforms, consolidation to
levels, curing, including supply of all
materials, excluding the cost of
M.S. work for reinforcement and
formworks etc. complete as per
direction of Engineer in charge.
With picked jhama or 1st class
brick chips
10 76-110 76- M.S. Work for reinforcement with kg 255.06
110- deformed M.S. bar, fy=300
10 N/mm�,(made from billet) in RCC
works, including local handling,
cutting,forging, bending, cleaning
and fabrication with supply of
deformedM.S. bar in different sizes
and binding with 22 to 18
gagesG.I.wireetc.completeincluding
the cost of all materials as per
direction of Engineer in charge.
8mm dia to 30mm dia.
11 36- 36- Formwork for centering and water Sqm 21.29
150 150- tight shuttering as per drawing
40 with14 BWG M.S. sheet, fitted and
fixed with 40mmx40mmx6mm
M.S.angle frame and 25mmx6mm
F.I. bar stiffener, with
necessaryfabrication, welding,
making the forms including fitting,
fixing of steelforms with necessary
ties, battens, struts, nuts & bolts,
props etc. as per desired shape
and size including levelling and
removing the forms after specified
period including the cost of all
materials as per direction of
Engineer in charge.
Beams and girders (web portion) in
deck/operating deck upto 3.5m
height with 60-80mm dia barrack
bamboo props.
12 76- 76- M.S. Work in plates, angles, kg 6226.36
170 170 channels, flat bars, Tees etc.
including fabricating, machining,
cutting, bending, welding, forging,
drilling, revetting, embedding
anchor bars, staging and fitting,
fixing, local handling etc. comlpete
with energy consumption and
supply of labours including the cost
of materials as per design,
specification and direction of
Engineer in charge.
13 76- 76- Manufacturing, supplying and kg 1202.77
280 280 installation of M.S.Embedded parts
for flap/ vertical lift gate including
fabricating, bending, welding,
forging, drilling holes, welding
anchor bars, fitting, fixing etc.
complete including the cost of
materials with a prime coat of red
oxide where necessary as per
design, specification and direction
of Engineer in charge.
14 40- 40- Supplying new Synthetic bags at Nos 1770
620 620- site
 20
Capacity 75 kg
15 40- 40- Labour charge for filling empty Nos 1770
630 603- gunny or synthetic bags with sand
20 or earth, sewing the end with sutly,
including carrying and placing in
above water position within the site
as per direction of Engineer in
charge

Capacity 75 kg (Fill volume = 0.040

cum).
16 76- 76- Labour charge for removal of Nos 1
270 270- M.S.Gates and Hoists from all
20 types ofstructures with all leads
and lifts including hire charge of
boat, chainpulley, bamboo, ropes
etc. and refixing the same in original
level, lineand grade after painting
(excluding the cost of painting) as
perdirection of Engineer in charge.
Small size: 1.35 m x 1.35 m or 1.00
m x 1.00 m
Grand
Total :
* Note: All applicable taxes, custom duties, VAT and other levies payable by the Contractor under the Contract shall be
included in the unit prices submitted by the Tenderer.

* Note: All applicable taxes, custom duties, VAT and other levies payable by the Contractor under the Contract shall be included
in the unit prices submitted by the Tenderer.