Nothing Special   »   [go: up one dir, main page]

Package Information - SC70-5: Surface Mounted, 5 Pin Package Package Outline

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Package information - SC70-5

Surface mounted, 5 pin package


Package outline

Dim. Millimeters Inches Dim. Millimeters Inches


Min. Max. Min. Max. Min. Max. Max. Max.
A 0.80 1.10 0.0315 0.0433 E 2.10 BSC 0.0826 BSC
A1 - 0.10 - 0.0039 E1 1.25 BSC 0.0492 BSC
A2 0.80 1.00 0.0315 0.0039 e 0.65 BSC 0.0255 BSC
b 0.15 0.30 0.006 0.0118 e1 1.30 BSC 0.0511 BSC
C 0.08 0.25 0.0031 0.0098 L 0.26 0.46 0.010 0.018
D 2.00 BSC 0.0787 BSC ␣ 0° 8° 0° 8°
Note: Controlling dimensions are in millimeters. Approximate dimensions are provided in inches

Nominal weight
Nominal weight per device 14mg.
Tape and reel information
Orientation Tape width Reel size No. of Tape option
(mm) (inches) components indicator
8 7 3,000 TA
8 13 10,000 TC

Issue 1 - September 2005 1 www.zetex.com


© Zetex Semiconductors plc 2005
Package information - SC70-5
Embossed carrier tape configuration

10 pitches culmulative
P0 tolerance on tape
K D ±0.2mm (±0.008”)
t P2

Top cover
E
tape See Note 1
A0
See Note 1 F W

B1 K0 B0
See Note 1

Center lines D1
Embossment of cavity
User direction of feed

Dimensions Tape size (mm)


mm (inches) 8 12 16 24
A0, B0, K0 See note* See note* See note* See note*
B1 (max.) 4.55 (0.179) 8.20 (0.323) 12.10 (0.476) 20.10 (0.791)
D 1.50 + 0.10 - 0.00 1.50 + 0.10 - 0.00 1.50 + 0.10 - 0.00 1.50 + 0.10 - 0.00
D1 (max.) 1.00 (0.039) 1.50 (0.059) 1.50 (0.059) 1.50 (0.059)
E 1.75 ± 0.10 1.75 ± 0.10 1.75 ± 0.10 1.75 ± 0.10
F 3.50 ± 0.10 5.50 ± 0.05 7.50 ± 0.10 11.50 ± 0.10
(0.138 ± 0.004) (0.217 ± 0.002) (0.295 ± 0.004) (0.453 ± 0.004)
P 4.00 ±0.10 4.00 ±0.10 4.00 ± 0.10 4.00 ± 0.10
(0.157 ± 0.004) (0.157 ± 0.004) (0.157 ± 0.004) (0.157 ± 0.004)
8.00 ±0.10 8.00 ±0.10 to 20.00 ± 0.10
(0.315 ± 0.004) (0.315 ± 0.004) (0.787 ± 0.004)
12.00 ± 0.10 in 4.00 (0.157)
(0.472 ± 0.004) increments
P0 4.00 ± 0.10 4.00 ± 0.10 4.00 ± 0.10 4.00 ± 0.10
P2 2.00 ± 0.05 2.00 ± 0.05 2.00 ± 0.05 2.00 ± 0.05
t (max.) 0.40 0.40 0.40 0.40
W 8.00 (0.315) 12.00 ± 0.30 16.30 (0.642) 24.30 (0.957)
(0.472 ± 0.012)

NOTES:
* A0, B0 and K0 dimensions are determined with respect to EIA/JEDEC rotational and lateral movement requirements
(see fig. 1).

0.5mm 20° maximum


maximum
Component
cavity
center line
B0
0.5mm
maximum
20° maximum

Component Component rotation - side view


center line
Component A0
lateral movement
Component rotation - top view

Issue 1 - September 2005 2 www.zetex.com


© Zetex Semiconductors plc 2005
Package information - SC70-5
Reel configuration

Tape slot in core


for tape start.
2.5mm min. width, T
10mm min. depth

A D N C

Full radius

Tape A (max.) B C D N G T
size (min.) (min.) (min.) (max.)
8mm 179 1.5 13.00 ±0.02 25.0 50 8.4 +1.5 –0.0 14.4
(7.047) (0.06) (0.512 ±0.008) (0.984) (1.969) (0.33 +0.06 – 0.00) (0.567)
12mm 330 1.5 13.00 ±0.02 20.2 50 12.4 +2.0 –0.0 18.4
(12.992) (0.06) (0.512 ±0.008) (0.795) (1.969) (0.49 +0.079 – 0.00) (0.724)
16mm 330 1.5 13.00 ±0.02 20.2 50 16.4 +2.0 –0.0 22.4
(12.992) (0.06) (0.512 ±0.008) (0.795) (1.969) (0.65 +0.079 – 0.00) (0.882)
24mm 330 1.5 13.00 ±0.02 20.2 60 24.4 +2.0 –0.0 30.4
(12.992) (0.06) (0.512 ±0.008) (0.795) (2.362) (0.96 +0.079 –0.00) (1.197)

This publication is issued to provide outline information only which (unless agreed by the company in writing) may not be used, applied or
reproduced for any purpose or form part of any order or contact or be regarded as a representation relating to the products or services concerned.
The company reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service.

Issue 1 - September 2005 3 www.zetex.com


© Zetex Semiconductors plc 2005

You might also like