END CLIENT M/s GODREJ INDUSTRIES LTD.

CONSULTANT M/s ESBEE POWER SOLUTION PVT.LTD.

PRESSURE
PO NO. 2223005174 DATED 03.01.20 TRANSMITTER DATA
SHEET FOR ACC
1 x 6 MW BIOMASS BASED
PROJECT
CAPTIVE COGEN POWER PLANT

Pressure Transmitter Data Sheet

For Air Cooled Condenser

VENDOR NAME : KELVION INDIA PVT. LTD.

VENDOR DOC. NO. : 200359781-PT-001

VENDOR JOB NO. : 200359781

0 ISSUED FOR INFORMATION MKB MKB AM 22/10/2020

REVISION DESCRIPTION ISSUED BY CHECKED BY APPROVED BY DATE

1
 ITEM PRESSURE TRANSMITTER
CUSTOMER KELVION INDIA PRIVATE LIMITED
PROJECT RFQ: FT LT & PT (GODREJ)
PO NO. -
DATE/REV 23.09.2020/R0
Sr. No. Particulars Details
1 Make Emerson(Rosemount)
2 Model 2051GP1A2B21AB4Q4D4M5 + MANI-I-MIC-BBS6A200Y
3 Tag No. Refer Attached Annexure-PT
4 Calibaration Range/ Unit Refer Attached Annexure-PT
5 Quantity Refer Attached Annexure-PT
Transmitter
6 Type Microprocessor based 2 wire type In-line pressure transmitter
7 Measurement Type Gage
8 Housing Material Anti-corrossive polyurethane covered Aluminium
9 Sensor Fill Fluid Silicone
10 Electical connection 2[1/2" -14 NPT (F)]
11 Process connection style 1/2" -14 NPT (F)
12 Diaphragm Material 316L SST
13 Output Signal 4–20 mA with digital signal based on HART Protocol
14 Principle of Sensor Piezoresistive Type
15 Display and Interface Options LCD Display
16 Ambient Temp Limit –40 to 175 °F (–40 to 80 °C)
17 Process Temp Limit –40 to 250 °F (–40 to 121 °C)
18 Power Supply 10.5–42.4 Vdc
19 Turn Down Ratio 100:1
20 Load Impedance 587.25 ohm at 24 VDC
21 Span Limit LRL -: –1.0 bar URL -: 2.1 bar
22 Reference Accuracy ±0.065 percent of span
23 Stability ±0.125 percent of URL for 5 years
24 Response Time Update Time 100 ms 22 times/sec
25 Dead time 60 ms
26 Over Pressure Limit 750 psi (51,7 bar)
27 Burst Pressure Limit 11000 psi (758,4 bar)
28 Ingress Protection IP66
29 Mounting Brackets Bracket for 2-in. pipe or panel mounting, all SST
30 Configuration Buttons Analog zero and span
31 Calibration Certification Calibration Certificate
32 Humidity 0–100% relative humidity
Manifold
33 Manifold Type 2-way Block Bleed Type
34 Body Material SS 316
35 Process Connection 1/2" NPT (F)
36 Options No Option Selected
37 EIL/NON EIL EIL
 ITEM PRESSURE TRANSMITTER
CUSTOMER KELVION INDIA PRIVATE LIMITED
PROJECT RFQ: FT LT & PT (GODREJ)
PO NO. -
DATE/REV 23.09.2020/R0
Sr. No. Particulars Details
1 Make Emerson(Rosemount)
2 Model 2051GP3A2B21AB4Q4D4M5 + MANI-I-MIC-BBS6A200Y
3 Tag No. Refer Attached Annexure-PT
4 Calibaration Range/ Unit Refer Attached Annexure-PT
5 Quantity Refer Attached Annexure-PT
Transmitter
6 Type Microprocessor based 2 wire type In-line pressure transmitter
7 Measurement Type Gage
8 Housing Material Anti-corrossive polyurethane covered Aluminium
9 Sensor Fill Fluid Silicone
10 Electical connection 2[1/2" -14 NPT (F)]
11 Process connection style 1/2" -14 NPT (F)
12 Diaphragm Material 316L SST
13 Output Signal 4–20 mA with digital signal based on HART Protocol
14 Principle of Sensor Piezoresistive Type
15 Display and Interface Options LCD Display
16 Ambient Temp Limit –40 to 175 °F (–40 to 80 °C)
17 Process Temp Limit –40 to 250 °F (–40 to 121 °C)
18 Power Supply 10.5–42.4 Vdc
19 Turn Down Ratio 100:1
20 Load Impedance 587.25 ohm at 24 VDC
21 Span Limit LRL -: –1.0 bar URL -: 55 bar
22 Reference Accuracy ±0.065 percent of span
23 Stability ±0.125 percent of URL for 5 years
24 Response Time Update Time 100 ms 22 times/sec
25 Dead time 60 ms
26 Over Pressure Limit 1,600 psi (110,3 bar)
27 Burst Pressure Limit 11000 psi (758,4 bar)
28 Ingress Protection IP66
29 Mounting Brackets Bracket for 2-in. pipe or panel mounting, all SST
30 Configuration Buttons Analog zero and span
31 Calibration Certification Calibration Certificate
32 Humidity 0–100% relative humidity
Manifold
33 Manifold Type 2-way Block Bleed Type
34 Body Material SS 316
35 Process Connection 1/2" NPT (F)
36 Options No Option Selected
37 EIL/NON EIL EIL
 1 2 3 4 5 6 9 11 12 13 14 15 16
7 8 10

MODEL STRING REVISION TABLE

A 2051GP1A2B21AB4Q4D4M5 + MANI-I-MIC-BBS6A200Y A
REVISION NAME DATE
REFER ATTACHED ANNEXURE- PT
AA B. MADARANG 21/09/20

DESCRIPTION
INITIAL RELEASE

B B

2051G

C C

5.13 3.85
[130,2] [97,8]
D 2.25 1.93 D
1/2-14 NPT [57,2] [48,9]

E E

F
5.87 F
[149,1]

G
G

1.30
[33,0]

H
1/2-14 NPT H

J J

MOUNTING BRACKET

K K

3.35
4.25
[85,1] 3RD ANGLE SIZE SCALE
[107,8]
DRAWINGS ARE IN ACCORDANCE WITH
CUSTOMER

FURNISHED AGAINST THE NOTED P.O.

REFERENCE ROSEMOUNT PRODUCT

SPECIFICATIONS AND ACCURATELY
ROSEMOUNT INC CERTIFIES THESE
6.15 KELVION INDIA PVT LTD. D NTS

DATA SHEETS FOR PRODUCT

REPRESENT THE EQUIPMENT

UNIT NOTES IN INCHES [mm].

ROSEMOUNT ENGINEERING
[156,2] L
©2015 ROSEMOUNT INC.

L
2.81 P.O. No.

SPECIFICATIONS.
CLICK HERE
[71,4]
S.O. No. 18916179
TITL
PROJECT NAME E
ROSEMOUNT 2051G
2.24
RFQ: FT LT & PT ( Godrej ) DIMENSIONAL DRAWING
M [56,8] OTHER REFERENCE DR. B. MADARANG 21/09/20 DRAWING NO. M
APP'D 18916179-001_1-AA
FORM REV AA
DO NOT SCALE PRINT CAD MAINTAINED, (PRO/E) SHEET 1
 1 2 3 4 5 6 9 11 12 13 14 15 16
7 8 10

MODEL STRING REVISION TABLE

A 2051GP3A2B21AB4Q4D4M5 + MANI-I-MIC-BBS6A200Y A
REVISION NAME DATE
REFER ATTACHED ANNEXURE- PT
AA B. MADARANG 21/09/20

DESCRIPTION
INITIAL RELEASE

B B

2051G

C C

5.13 3.85
[130,2] [97,8]
D 2.25 1.93 D
1/2-14 NPT [57,2] [48,9]

E E

F
5.87 F
[149,1]

G
G

1.30
[33,0]

H
1/2-14 NPT H

J J

MOUNTING BRACKET

K K

3.35
4.25
[107,8]
[85,1] CUSTOMER 3RD ANGLE SIZE SCALE
DRAWINGS ARE IN ACCORDANCE WITH

FURNISHED AGAINST THE NOTED P.O.

REFERENCE ROSEMOUNT PRODUCT

SPECIFICATIONS AND ACCURATELY
ROSEMOUNT INC CERTIFIES THESE
6.15 KELVION INDIA PVT LTD. D NTS

DATA SHEETS FOR PRODUCT

REPRESENT THE EQUIPMENT

UNIT NOTES IN INCHES [mm].

ROSEMOUNT ENGINEERING
[156,2] L
©2015 ROSEMOUNT INC.

L
2.81 P.O. No.

SPECIFICATIONS.
[71,4]

CLICK HERE
S.O. No. 18916179
TITL
PROJECT NAME E
ROSEMOUNT 2051G
2.24
RFQ: FT LT & PT ( Godrej ) DIMENSIONAL DRAWING
M [56,8] OTHER REFERENCE DR. B. MADARANG 21/09/20 DRAWING NO. M
APP'D 18916179-003_1-AA
FORM REV AA

DO NOT SCALE PRINT

CAD MAINTAINED, (PRO/E) SH
EE
T
1
 REF:-D/DRG/JOB/VMD/MANI-I-MIC-BB REV-0
REVISIONS
TRANSMITTER
PROCESS REV DESCRIPTION CHG.NO. APP'D DATE
A NEW RELEASE --

VENT TABLE 1 TABLE 2 TABLE 3

CONNECTION SCHEMATIC MicroP MicroP MicroP
Rosemount Rosemount Rosemount
Body Material Model Process Connection Model Stem Seal Model
A Code Code Code
Code Code Code
1/4"-18 ANPT VENT REFER TABLE 2
1/2"-14 ANPT(M) ISOLA S6 SS 316/316L 1 A2 Female 1/2 Inch ANPT CBA / CB -- Teflon P
WITH PLUG OF DRG. NO. MANI-I-MIC-BB
INSTRUMENT (INLET) PROCESS CONN. HC Hastelloy C-276 8 B2 Female 1/2 Inch BSP-ISO BN -- Grafoil G
(OUTLET) CONN.
MO Monel 400 7

TABLE 4 TABLE 5
6.25 (~)
FULLY SQ. 1.25 MicroP MicroP
Rosemount Rosemount
Options Model Options Model
OPEN Code Code
Code Code
00 No Option selected -- Y EIL approved --
01 Sour Gas - NACE NC N NON EIL --
02 Oxygen Cleaning OXY
Oxygen Cleaning and
03 NC-OXY
Sour Gas
Sour Gas - NACE
04 and IGC Practice NC

7 8
6 Rosemount PART NO. DESIGNATION
5 MANI-I-MIC-BB S6 A2 00
01 Y
N
4
4.53 +0.08 Basic Part Number EIL / Non EIL as per table 5
3
Body Material as per Table 1 Options as per Table 4

Process Connection as per Table 2

1

NOTES:-
1. PRESSURE TEMP. RATING:- 2
(a) PTFE-----------6000 PSI AT 200°F (b) GRAFOIL-----6000 PSI AT 200°F MicroP MODEL NO. DESIGNATION
---- 4000 PSI AT 500°F DETAIL A-A.
---- 1500 PSI AT 750°F
2. HYDRO TEST PRESSURE---------10,000 PSI AT ROOM TEMP. MPGV32A/R- 1 - CB - P - NC
3. PNEUMATIC TEST PRESSURE---------80 PSI.
4. NITROGEN TEST PRESSURE---------------------1,200 PSI.
MicroP Model Number Options as per Table 4 STEM
8 HANDLE 2 SS-304/304L SS-304/304L SS-304/304L
Body Material as per Table 1 Process SEAL, as per Table 3
7 DUST CAP 2
6 GLAND PACKING ADJUSTER 2 SS-316/316L SS-316/316L SS-316/316L Connection as per Table 2
5 LOCK NUT 2 SS-304/304L SS-304/304L SS-304/304L
4 GLAND PACKING TO SUIT PTFE / GRAFOIL PTFE / GRAFOIL PTFE / GRAFOIL
NOTES:-
3 BONNET 2 SS-316/316L HASTELLOY C-276 MONEL 400
1.1 THESE ARE NON ROSEMOUNT BRANDED MANIFOLDS
2 STEM WITH TIP (CONE) 2 SS-316/316L HASTELLOY C-276 MONEL 400
1.2 THESE CAN BE USED WITH 3051T/2051T/3051G/2088/ TRANSMITTER.
1 BODY 1 SS-316/316L HASTELLOY C-276 MONEL 400
1.3 MicroP MODEL NO. DESIGNATION WILL BE PUNCHED ON THE MANIFOLD ASSY.
QTY. S6 HC MO
PART PER
NO. DESCRIPTION
ASSY. MATERIAL (REFER TABLE 1)

PROJECT GEN. TOL. EXCEPT AS NOTED

CUSTOMER ALL DIMENSION ARE IN INCHES
M/S EMERSON PROCESS MANAGEMENT. EXCEPT AS NOTED CUSTOMER: REF PURCHASE ORDER
P.O. NO. APPROVED A.D
JOB NO. CHECKED AVINASH
UNLESS OTHERWISE SPECIFIED PROJECT: R

TITLE:- DRAWN A.KUMAR 28/07/2020 DIMENSIONS IN INCHES [mm].

REMOVE ALL BURRS AND INC. CHANHASSEN, MINNESOTA
2 VALVE PRESSURE GAUGE VALVE DESIGNED SHARP EDGES, MACHINE
DATE NO. DESCRIPTION (MODEL NO.- MPGV32A/R) SURFACE FINISH 125 DR. TITLE :
REVISION ( HARD SEAT)
NAME SIG. DATE - DEC TOLERANCE- APP'D. MANIFOLD 2 VALVE BLOCK & BLEED
DRAWING NO. .X ± .1 [2.5] DRAWING
SCALE
.XX ± .02 [0.5]
APP'D.
DRAWING
(NON INTEGRAL)
N.T.S. MICRO PRECISION PRODUCTS PVT. LTD. MPGV32A/R-MANI-I-MIC-BB .XXX ± .010 [0.25] APP'D. SIZE : DRAWING NO. :

WIK H.B. No. 40, REVENUE ESTATE, VILLAGE – DUDHOLA,

TEHSIL & DISTT. – PALWAL (HARYANA) – 121102
SHEET 1 OF
REV. 0
1 FRACTIOANGLES
NS
±1/32
±2°
TAGGING
APP'D. SPECIALS
A SCALE : NONE
 MANI-I-MIC-BB
WT. : -- SHEET 1 OF
 ANNEXURE-PT
Po. Sr. No. Tag No. Calibration Range Transmitter Model Manifold Qty
40 PT-CDW-01 -1 to 1.5 kg/cm2 2051GP1A2B21AB4Q4D4M5 MANI-I-MIC-BBS6A200Y 1
50 PT-CDW-02 -1 to 1.5 kg/cm2 2051GP1A2B21AB4Q4D4M5 MANI-I-MIC-BBS6A200Y 1
60 PT-CDW-03 0-20 Kg/cm2 2051GP3A2B21AB4Q4D4M5 MANI-I-MIC-BBS6A200Y 1
 DECODIFICATION-PT1
2051GP1A2B21AB4Q4D4M5
2051G Transmitter Type: In-line pressure transmitter
P Measurement Type: Gage
1 Pressure Upper Range Limit: –14.7 to 30 psi (–1.0 to 2.1 bar)
A Transmitter Output: 4-20 mA with Digital Signal Based on HART Protocol
2B Process connection style: ½–14 NPT female
2 Isolating Diaphragm: 316L SST
1 Sensor Fill Fluid: Silicone
A Housing material, Conduit entry size: Aluminum, 1/2''–14 NPT
B4 Mounting Brackets: Bracket for 2-in. pipe or panel mounting, all SST
Q4 Calibration Certification: Calibration Certificate
D4 Configuration buttons: Analog zero and span
M5 Display and Interface Options: LCD Display
MANI-I-MIC-BBS6A200Y
MANI-I-MIC-BB Manifold Type: 2-way Block Bleed Type
S6 Body Material: SS 316
A2 Process Connection: 1/2" NPT (F)
00 Options: No Option Selected
Y EIL/NON EIL: EIL

DECODIFICATION-PT2
2051GP3A2B21AB4Q4D4M5
2051G Transmitter Type: In-line pressure transmitter
P Measurement Type: Gage
3 Pressure Upper Range Limit: –14.7 to 800 psi (–1.0 to 55 bar)
A Transmitter Output: 4-20 mA with Digital Signal Based on HART Protocol
2B Process connection style: ½–14 NPT female
2 Isolating Diaphragm: 316L SST
1 Sensor Fill Fluid: Silicone
A Housing material, Conduit entry size: Aluminum, 1/2''–14 NPT
B4 Mounting Brackets: Bracket for 2-in. pipe or panel mounting, all SST
Q4 Calibration Certification: Calibration Certificate
D4 Configuration buttons: Analog zero and span
M5 Display and Interface Options: LCD Display
MANI-I-MIC-BBS6A200Y
MANI-I-MIC-BB Manifold Type: 2-way Block Bleed Type
S6 Body Material: SS 316
A2 Process Connection: 1/2" NPT (F)
00 Options: No Option Selected
Y EIL/NON EIL: EIL