E WIMA MKP 4
E WIMA MKP 4
E WIMA MKP 4
WIMA MKP 4
Metallized Polypropylene (PP) Capacitors
in PCM 7.5 mm to 37.5 mm. Capacitances from 0.01 mF to 68 mF.
Rated Voltages from 100 VDC to 1250 VDC.
Vacuum-deposited
electrode Pull test on pins: Available taped and reeled up to and
Metal contact layer
(schoopage)
d T 0.8 l: 10 N in direction of pins including case size 15 x 26 x 31.5 /
Terminating wire
d > 0.8 l: 20 N in direction of pins PCM 27.5 mm.
according to IEC 60068-2-21
Vibration: Detailed taping information and graphs
6 hours at 10 ... 2000 Hz and 0.75 mm at the end of the catalogue.
Encapsulation: displacement amplitude or 10 g in
Solvent-resistant, flame-retardant plastic accordance with IEC 60068-2-6
case with epoxy resin seal, UL 94 V-0 Low air density:
Terminations: 1kPa = 10 mbar in accordance with
Tinned wire. IEC 60068-2-13
Marking: Bump test:
Colour: Red. Marking: Black. 4000 bumps at 390 m/sec2 For further details and graphs please
in accordance with IEC 60068-2-29 refer to Technical Information.
06.21
58
D
WIMA MKP 4
Continuation
General Data
100 VDC/63 VAC* 250 VDC/160 VAC*
Capacitance
W H L PCM** Part number W H L PCM** Part number
0.01 mF 3 8.5 10 7.5 MKP4D021002B00_ _ _ _ 3 8.5 10 7.5 MKP4F021002B00_ _ _ _
0.015 „ 3 8.5 10 7.5 MKP4D021502B00_ _ _ _ 3 8.5 10 7.5 MKP4F021502B00_ _ _ _
0.022 „ 3 8.5 10 7.5 MKP4D022202B00_ _ _ _ 3 8.5 10 7.5 MKP4F022202B00_ _ _ _
0.033 „ 3 8.5 10 7.5 MKP4D023302B00_ _ _ _ 3 8.5 10 7.5 MKP4F023302B00_ _ _ _
4 9 13 10 MKP4D023303C00_ _ _ _ 4 9 13 10 MKP4F023303C00_ _ _ _
0.047 „ 4 9 10 7.5 MKP4D024702C00_ _ _ _ 4 9 10 7.5 MKP4F024702C00_ _ _ _
4 9 13 10 MKP4D024703C00_ _ _ _ 4 9 13 10 MKP4F024703C00_ _ _ _
0.068 „ 4 9 10 7.5 MKP4D026802C00_ _ _ _ 4 9 10 7.5 MKP4F026802C00_ _ _ _
4 9 13 10 MKP4D026803C 00_ _ _ _ 4 9 13 10 MKP4F026803C00_ _ _ _
0.1 mF 4.5 9.5 10.3 7.5 MKP4D031002D00_ _ _ _ 4.5 9.5 10.3 7.5 MKP4F031002D00_ _ _ _
4 9 13 10 MKP4D031003C00_ _ _ _ 4 9 13 10 MKP4F031003C00_ _ _ _
0.15 „ 5 10.5 10.3 7.5 MKP4D031502E00_ _ _ _ 5 10.5 10.3 7.5 MKP4F031502E00_ _ _ _
5 11 13 10 MKP4D031503F00_ _ _ _ 5 11 13 10 MKP4F031503F00_ _ _ _
0.22 „ 6 12 13 10 MKP4D032203G00_ _ _ _ 6 12 13 10 MKP4F032203G00_ _ _ _
5 11 18 15 MKP4D032204B00_ _ _ _ 5 11 18 15 MKP4F032204B00_ _ _ _
0.33 „ 6 12.5 18 15 MKP4D033304C00_ _ _ _ 6 12.5 18 15 MKP4F033304C00_ _ _ _
0.47 „ 7 14 18 15 MKP4D034704D00_ _ _ _ 7 14 18 15 MKP4F034704D00_ _ _ _
0.68 „ 8 15 18 15 MKP4D036804F00_ _ _ _ 8 15 18 15 MKP4F036804F00_ _ _ _
6 15 26.5 22.5 MKP4D036805B00_ _ _ _ 6 15 26.5 22.5 MKP4F036805B00_ _ _ _
1.0 mF 7 16.5 26.5 22.5 MKP4D041005D00_ _ _ _ 7 16.5 26.5 22.5 MKP4F041005D00_ _ _ _
9 19 31.5 27.5 MKP4F041006A00_ _ _ _
1.2 „ 10.5 19 26.5 22.5 MKP4D041205G00_ _ _ _ 10.5 19 26.5 22.5 MKP4F041205G00_ _ _ _
9 19 31.5 27.5 MKP4F041206A00_ _ _ _
1.5 „ 10.5 19 26.5 22.5 MKP4D041505G00_ _ _ _ 10.5 19 26.5 22.5 MKP4F041505G00_ _ _ _
11 21 31.5 27.5 MKP4F041506B00_ _ _ _
1.8 „ 11 21 26.5 22.5 MKP4D041805I00_ _ _ _ 11 21 26.5 22.5 MKP4F041805I00_ _ _ _
11 21 31.5 27.5 MKP4F041806B00_ _ _ _
2.2 „ 11 21 26.5 22.5 MKP4D042205I00_ _ _ _ 11 21 26.5 22.5 MKP4F042205I00_ _ _ _
9 19 31.5 27.5 MKP4D042206A00_ _ _ _ 11 21 31.5 27.5 MKP4F042206B00_ _ _ _
2.7 „ 9 19 31.5 27.5 MKP4D042706A00_ _ _ _ 11 21 31.5 27.5 MKP4F042706B00_ _ _ _
3.3 „ 9 19 31.5 27.5 MKP4D043306A00_ _ _ _ 13 24 31.5 27.5 MKP4F043306D00_ _ _ _
3.9 „ 11 21 31.5 27.5 MKP4D043906B00_ _ _ _ 13 24 31.5 27.5 MKP4F043906D00_ _ _ _
4.7 „ 13 24 31.5 27.5 MKP4D044706D00_ _ _ _ 15 26 31.5 27.5 MKP4F044706F00_ _ _ _
13 24 41.5 37.5 MKP4F044707C00_ _ _ _
5.6 „ 13 24 31.5 27.5 MKP4D045606D00_ _ _ _ 17 29 31.5 27.5 MKP4F045606G00_ _ _ _
15 26 41.5 37.5 MKP4F045607D00_ _ _ _
6.8 „ 15 26 31.5 27.5 MKP4D046806F00_ _ _ _ 17 29 31.5 27.5 MKP4F046806G00_ _ _ _
15 26 41.5 37.5 MKP4F046807D00_ _ _ _
8.2 „ 15 26 31.5 27.5 MKP4D048206F00_ _ _ _ 17 34.5 31.5 27.5 MKP4F046806I00_ _ _ _
17 29 41.5 37.5 MKP4F046807E00_ _ _ _
10 mF 17 29 31.5 27.5 MKP4D051006G00 _ _ _ _ 20 39.5 31.5 27.5 MKP4F051006J00_ _ _ _
13 24 41.5 37.5 MKP4D051007C00 _ _ _ _ 19 32 41.5 37.5 MKP4F051007F00_ _ _ _
12 „ 17 29 31.5 27.5 MKP4D051206G00 _ _ _ _ 20 39.5 41.5 37.5 MKP4F051207G00_ _ _ _
15 26 41.5 37.5 MKP4D051207D00_ _ _ _
15 „ 17 34.5 31.5 27.5 MKP4D051506I00 _ _ _ _ 20 39.5 41.5 37.5 MKP4F051507G00_ _ _ _
17 29 41.5 37.5 MKP4D051507E00_ _ _ _
18 „ 20 39.5 31.5 27.5 MKP4D051806J00_ _ _ _ 24 45.5 41.5 37.5 MKP4F051807H00_ _ _ _
19 32 41.5 37.5 MKP4D051807F00_ _ _ _
22 „ 20 39.5 41.5 37.5 MKP4D052207G00 _ _ _ _ 24 45.5 41.5 37.5 MKP4F052207H00_ _ _ _
28 38 41.5 37.5 MKP4F052207L00_ _ _ _
27 „ 20 39.5 41.5 37.5 MKP4D052707G00 _ _ _ _ 31 46 41.5 37.5 MKP4F052707I00_ _ _ _
33 „ 28 38 41.5 37.5 MKP4D053307L00_ _ _ _ 35 50 41.5 37.5 MKP4F053307J00_ _ _ _
24 45.5 41.5 37.5 MKP4D053307H00_ _ _ _
39 „ 31 46 41.5 37.5 MKP4D053907I00_ _ _ _ 40 55 41.5 37.5 MKP4F053907K00_ _ _ _
47 „ 35 50 41.5 37.5 MKP4D054707J00_ _ _ _
56 „ 35 50 41.5 37.5 MKP4D055607J00_ _ _ _
68 „ 40 55 41.5 37.5 MKP4D056807K00 _ _ _ _
* AC voltage: f T 400 Hz; 1.4 x Urms + UDC T Ur
Dims. in mm.
06.21
** PCM = Printed circuit module = pin spacing Rights reserved to amend design data without prior notification.
Continuation page 60
59
D
WIMA MKP 4
Continuation
General Data
400 VDC/220 VAC* 630 VDC/280 VAC*
Capacitance
W H L PCM** Part number W H L PCM** Part number
0.01 mF 3 8.5 10 7.5 MKP4G021002B00_ _ _ _ 3 8.5 10 7.5 MKP4J021002B00_ _ _ _
4 9 13 10 MKP4J021003C00_ _ _ _
0.015 „ 4 9 10 7.5 MKP4G021502C00_ _ _ _ 4 9 10 7.5 MKP4J021502C00_ _ _ _
4 9 13 10 MKP4G021503C00_ _ _ _ 4 9 13 10 MKP4J021503C00_ _ _ _
0.022 „ 4.5 9.5 10.3 7.5 MKP4G022202D00_ _ _ _ 4.5 9.5 10.3 7.5 MKP4J022202D00_ _ _ _
4 9 13 10 MKP4G022203C00_ _ _ _ 4 9 13 10 MKP4J022203C00_ _ _ _
0.033 „ 5 10.5 10.3 7.5 MKP4G023302E00_ _ _ _ 5 10.5 10.3 7.5 MKP4J023302E00_ _ _ _
4 9 13 10 MKP4G023303C00_ _ _ _ 4 9 13 10 MKP4J023303C00_ _ _ _
0.047 „ 5 10.5 10.3 7.5 MKP4G024702E00_ _ _ _ 5.7 12.5 10.3 7.5 MKP4J024702F00_ _ _ _
5 11 13 10 MKP4G024703F00_ _ _ _ 5 11 13 10 MKP4J024703F00_ _ _ _
0.068 „ 5.7 12.5 10.3 7.5 MKP4G026802F00_ _ _ _ 6 12 13 10 MKP4J026803G00_ _ _ _
5 11 13 10 MKP4G026803F 00_ _ _ _ 6 12.5 18 15 MKP4J026804C00_ _ _ _
0.1 mF 6 12 13 10 MKP4G031003G00_ _ _ _ 7 14 18 15 MKP4J031004D00_ _ _ _
5 11 18 15 MKP4G031004B00_ _ _ _
0.15 „ 6 12.5 18 15 MKP4G031504C00_ _ _ _ 8 15 18 15 MKP4J031504F00_ _ _ _
6 15 26.5 22.5 MKP4J031505B00_ _ _ _
0.22 „ 7 14 18 15 MKP4G032204D00_ _ _ _ 9 16 18 15 MKP4J032204J00_ _ _ _
7 16.5 26.5 22.5 MKP4J032205D00_ _ _ _
0.33 „ 8 15 18 15 MKP4G033304F00_ _ _ _ 8.5 18.5 26.5 22.5 MKP4J033305F00_ _ _ _
6 15 26.5 22.5 MKP4G033305B00_ _ _ _
0.47 „ 7 16.5 26.5 22.5 MKP4G034705D00_ _ _ _ 10.5 19 26.5 22.5 MKP4J034705G00_ _ _ _
11 21 31.5 27.5 MKP4J034706B00_ _ _ _
0.68 „ 8.5 18.5 26.5 22.5 MKP4G036805F00_ _ _ _ 11 21 31.5 27.5 MKP4J036806B00_ _ _ _
1.0 mF 11 21 26.5 22.5 MKP4G041005I00_ _ _ _ 13 24 31.5 27.5 MKP4J041006D00_ _ _ _
11 21 31.5 27.5 MKP4G041006B00_ _ _ _
1.2 „ 11 21 31.5 27.5 MKP4G041206B00_ _ _ _ 15 26 31.5 27.5 MKP4J041206F00_ _ _ _
1.5 „ 11 21 31.5 27.5 MKP4G041506B00_ _ _ _ 15 26 31.5 27.5 MKP4J041506F00_ _ _ _
13 24 41.5 37.5 MKP4J041507C00_ _ _ _
1.8 „ 13 24 31.5 27.5 MKP4G041806D00_ _ _ _ 17 29 31.5 27.5 MKP4J041806G00_ _ _ _
15 26 41.5 37.5 MKP4J041807D00_ _ _ _
2.2 „ 15 26 31.5 27.5 MKP4G042206F00_ _ _ _ 17 34.5 31.5 27.5 MKP4J042206I00_ _ _ _
13 24 41.5 37.5 MKP4G042207C00_ _ _ _ 17 29 41.5 37.5 MKP4J042207E00_ _ _ _
2.7 „ 17 29 31.5 27.5 MKP4G042706G00_ _ _ _ 17 29 41.5 37.5 MKP4J042707E00_ _ _ _
3.3 „ 17 29 31.5 27.5 MKP4G043306G00_ _ _ _ 20 39.5 31.5 27.5 MKP4J043306J00_ _ _ _
15 26 41.5 37.5 MKP4G043307D00_ _ _ _ 19 32 41.5 37.5 MKP4J043307F00_ _ _ _
3.9 „ 20 39.5 31.5 27.5 MKP4G043906J00_ _ _ _ 20 39.5 41.5 37.5 MKP4J043907G00_ _ _ _
4.7 „ 20 39.5 31.5 27.5 MKP4G044706J00_ _ _ _ 20 39.5 41.5 37.5 MKP4J044707G00_ _ _ _
19 32 41.5 37.5 MKP4G044707F00_ _ _ _
5.6 „ 20 39.5 41.5 37.5 MKP4G045607G00_ _ _ _ 24 45.5 41.5 37.5 MKP4J045607H 00_ _ _ _
28 38 41.5 37.5 MKP4J045607L00_ _ _ _
6.8 „ 20 39.5 41.5 37.5 MKP4G046807G 00_ _ _ _ 24 45.5 41.5 37.5 MKP4J046807H 00_ _ _ _
28 38 41.5 37.5 MKP4J046807L00_ _ _ _
8.2 „ 24 45.5 41.5 37.5 MKP4G048207H 00_ _ _ _ 31 46 41.5 37.5 MKP4J048207I00_ _ _ _
10 mF 24 45.5 41.5 37.5 MKP4G051007H00_ _ _ _ 35 50 41.5 37.5 MKP4J051007J00_ _ _ _
28 38 41.5 37.5 MKP4G051007L00_ _ _ _
12 „ 31 46 41.5 37.5 MKP4G051207I00_ _ _ _ 40 55 41.5 37.5 MKP4J051207K00_ _ _ _
15 „ 31 46 41.5 37.5 MKP4G051507I00_ _ _ _
18 „ 35 50 41.5 37.5 MKP4G051807J00_ _ _ _
22 „ 40 55 41.5 37.5 MKP4G052207K00_ _ _ _
* AC voltages: f T 400 Hz; 1.4 x Urms + UDC T Ur
New values and box sizes.
The box sizes according to main catalogue 2019 are still available on request.
** PCM = Printed circuit module = pin spacing
Dims. in mm.
Rights resered to amend design data without prior notification.
Continuation page 61
06.21
60
D
WIMA MKP 4
Continuation
General Data
1000 VDC/400 VAC * 1250 VDC/500 VAC*
Capacitance
W H L PCM** Part number W H L PCM** Part number
0.01 mF 5.7 12.5 10.3 7.5 MKP4O121002F00_ _ _ _ 5 11 18 15 MKP4R021004B00_ _ _ _
5 11 13 10 MKP4O121003F00_ _ _ _
0.015 „ 5 11 13 10 MKP4O121503F00_ _ _ _ 6 12.5 18 15 MKP4R021504C00_ _ _ _
5 11 18 15 MKP4O121504B00_ _ _ _
0.022 „ 5 11 18 15 MKP4O122204B00_ _ _ _ 7 14 18 15 MKP4R022204D00_ _ _ _
0.033 „ 6 12.5 18 15 MKP4O123304C00_ _ _ _ 8 15 18 15 MKP4R023304F00_ _ _ _
0.047 „ 7 14 18 15 MKP4O124704D00_ _ _ _ 6 15 26.5 22.5 MKP4R024705B00_ _ _ _
0.068 „ 8 15 18 15 MKP4O126804F00_ _ _ _ 8.5 18.5 26.5 22.5 MKP4R026805F00_ _ _ _
6 15 26.5 22.5 MKP4O126805B00 _ _ _ _
0.1 mF 9 16 18 15 MKP4O131004J00_ _ _ _ 10.5 19 26.5 22.5 MKP4R031005G00_ _ _ _
7 16.5 26.5 22.5 MKP4O131005D00_ _ _ _ 9 19 31.5 27.5 MKP4R031006A00_ _ _ _
0.15 „ 8.5 18.5 26.5 22.5 MKP4O131505F00_ _ _ _ 11 21 31.5 27.5 MKP4R031506B00_ _ _ _
0.22 „ 11 21 26.5 22.5 MKP4O132205I00_ _ _ _ 13 24 31.5 27.5 MKP4R032206D00_ _ _ _
11 21 31.5 27.5 MKP4O132206B00_ _ _ _
0.33 „ 11 21 31.5 27.5 MKP4O133306B00_ _ _ _ 15 26 31.5 27.5 MKP4R033306F00_ _ _ _
13 24 41.5 37.5 MKP4R033307C00_ _ _ _
0.47 „ 13 24 31.5 27.5 MKP4O134706D00_ _ _ _ 17 29 31.5 27.5 MKP4R034706G00_ _ _ _
15 26 41.5 37.5 MKP4R034707D00_ _ _ _
0.68 „ 17 29 31.5 27.5 MKP4O136806G00 _ _ _ _ 20 39.5 31.5 27.5 MKP4R036806J00 _ _ _ _
15 26 41.5 37.5 MKP4O136807D00_ _ _ _ 19 32 41.5 37.5 MKP4R036807F00 _ _ _ _
1.0 mF 20 39.5 31.5 27.5 MKP4O141006J00_ _ _ _ 20 39.5 41.5 37.5 MKP4R041007G00_ _ _ _
17 29 41.5 37.5 MKP4O141007E00_ _ _ _
1.2 „ 19 32 41.5 37.5 MKP4O141207F00_ _ _ _ 20 39.5 41.5 37.5 MKP4R041207G00_ _ _ _
1.5 „ 20 39.5 41.5 37.5 MKP4O141507G00_ _ _ _ 24 45.5 41.5 37.5 MKP4R041507H00_ _ _ _
1.8 „ 20 39.5 41.5 37.5 MKP4O141807G00_ _ _ _ 24 45.5 41.5 37.5 MKP4R041807H00_ _ _ _
2.2 „ 24 45.5 41.5 37.5 MKP4O142207H00_ _ _ _ 31 46 41.5 37.5 MKP4R042207I00_ _ _ _
28 38 41.5 37.5 MKP4O142207L00_ _ _ _
2.7 „ 31 46 41.5 37.5 MKP4O142707I00_ _ _ _ 35 50 41.5 37.5 MKP4R042707J00 _ _ _ _
3.3 „ 31 46 41.5 37.5 MKP4O143307I00_ _ _ _ 40 55 41.5 37.5 MKP4R043307K00_ _ _ _
3.9 „ 35 50 41.5 37.5 MKP4O143907J00 _ _ _ _
4.7 „ 35 50 41.5 37.5 MKP4O144707J00 _ _ _ _
* AC voltages: f T 400 Hz; 1.4 x Urms + UDC T Ur
Part number completion:
New values, box sizes and range. The box sizes according to main catalogue 2019
Version code: 2-pin = 00
are still available on request.
4-pin = D4
** PCM = Printed circuit module = pin spacing Tolerance: 20 % = M
10 % = K
5 % = J
Dims. in mm. Packing: bulk = S
Pin length: 6-2 = SD
Taped version see page 161.
2-pin version 4-pin version
P d PCM W W PCM b P d c
0.5 7.5 =3 17 37.5 10 1.0 0.4
0.6 7.5 U 4 19 37.5 10 1.0 0.4
0.6 10 20 37.5 12.5 1.0 0.4
0.8 15 - 27.5 24 37.5 12.5 1.0 0.4
1.0 37.5 28 37.5 10 1.0 0.4
31 37.5 20 1.0 0.4
pin pin pin
c c 35 37.5 20 1.0 0.4
40 37.5 20 1.0 0.4
06.21
Continuation page 62
61
D
WIMA MKP 4
Continuation
10 10 1
1 1 0.1
7 7 7
5 5 5
3 3 3
--
--
0.1
--
0.2
µF
0.
--
-- 0.
01
2µ
0.4
--
0. 06
µF
F
7 7 7
02 8
7µ
2 µF
5 5 5
µF
F
0.1 µF
3 3 3
1 1 1
0.
-
3 15 3 3
0. .68
µF
47 µ
-- 2.2 µF
--
--
µF F
1.
0.
47
-- - 4
-- 2 µF
5
-- 4
-
-- 6
µF
3. .7 µ
µF
3 F
7 7 7
2 µF
. 7
.8 µ
5 5 5
F
3 3 3
Permissible AC voltage
in relation to frequency
at 10) C internal temperature rise
(general guide).
06.21
62
D
Soldering Process
ISO 9001:2015 is an international basic All WIMA capacitors, irrespective of According to the RoHS Directive 2011/65/EU
standard of quality assurance systems whether through-hole devices or SMD, as amended from time to time certain hazar-
for all branches of industry. The approval are made of environmentally friendly dous substances like e.g. lead, cadmium,
according to ISO 9001:2015 of our facto- materials. Neither during manufacture mercury must not be used any longer in
ries by the infaz (Institut für Auditierung und nor in the product itself any toxic sub- electronic equipment as of July 1st, 2006. For
Zertifizierung) certifies that organisation, stances are used, e.g. the sake of the environment WIMA has re-
equipment and monitoring of quality assu- fraind from using such substances since years
rance in our factories correspond to inter- – Lead – PBB/PBDE already.
nationally recognized standards. – PCB – Arsenic
– CFC – Cadmium
WIMA WPCS – Hydrocarbon chloride – Mercury
– Chromium 6+ – etc.
WIMA Kondensatoren sind bleifrei
The WIMA Process Control System (WPCS) konform RoHS 2011/65/EU
is a quality surveillance and optimization We merely use pure, recyclable materials
WIMA capacitors are lead free
system developed by WIMA. WPCS is a for packing our components, such as: in accordance with RoHS 2011/65/EU
major part of the quality-oriented WIMA
production. Points of application during ” carton
production process: ” cardboard
” adhesive tape made of paper
” incoming material inspection ” polystyrene Tape for lead-free WIMA capacitors
” metallization
” film inspection
We almost completely refrain from using DIN EN ISO 14001:2004
” schoopage
packing materials such as:
” pre-healing
” pin attachment WIMA’s environmental management has
” adhesive tapes made of plastic
” cast resin preparation/ been established in accordance with the
” metal clips
encapsulation guidelines of DIN EN ISO 14001:2004 to
” 100% final inspection optimize the production processes with
” Testing as per customer requirements regard to energy and resources.
06.21
15
D
P1
W2
H1
H
W0 Diagram 1:
W1
PCM 2.5/5/7.5mm
W
D0
d
F
P0
P
t
P
H1
P1 P1
H
d d
F P0 P2 P0
P2 F
Position of components according to PCM 7.5 (sketch 1). P 0 = 12.7 or 15.0 is possible
161
D
340 max.
370 max.
360 max.
500 max.
30±1
25±1
340 max.
.
34 ax
0m 0 m ax.
ax. 34 0 m
50 max. 49
50 max. B
70 max.
162
D
163
D
* for 2-inch transport pitches. Moulded versions. Rights reserved to amend design data without prior notification.
* TPS (Tray-Packing-System). Plate versions may have different packing units.
Samples and pre-production needs on request.
164
D
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
M K S 2 C 0 2 1 0 0 1 A 0 0 M S S D
The data on this page is not complete and serves only to explain the part number system. Part number information is listed on the
pages of the respective WIMA range.
06.21
159