C78ent DS P2g04c001u
C78ent DS P2g04c001u
C78ent DS P2g04c001u
C78 ENT
FOR INDUSTRIAL APPLICATIONS
6 CYLINDER IN-LINE - DIESEL CYCLE
220 kW (295 hp) @ 2200 rpm
1250 Nm (922 lb.ft) @ 1200 rpm
E
C
N
E
L
L
E
C
X
E
L
A
C
I
G
O
L
O
N
H
C
E
T
C78 ENT FOR INDUSTRIAL APPLICATIONS
Technical code F2BE0687_*B3..
Thermodynamic cycle Diesel 4 stroke - D.I
Aspiration TAA
Configuration 6L
Bore x Stroke mm (in.) 115 X 125 (4.53 X 4.92)
Total displacement liters (cu. in.) 7.8 (476)
Valves per cylinder 4
Cooling liquid
Direction of rotation (viewed facing flywheel) CCW
Compression ratio 16 : I
Rotation mass moment of inertia (without flywheel) kgm2 (lbft2) 0.30 (7.12)
Standard flywheel inertia kgm2 (lbft2) 1.93 (45.80)
Air induction
Max suggested intake restriction with clean air filter kPa (in. H2O) 3.5 (14)
Max allowable restriction with dirty air filter kPa (in. H2O) 6.0 (24)
Air requirement for combustion at 100% load/rated speed kg/h (lb/h) 1280 (2822)
Turbocharging pressure at full load/rated speed kPa (psi) 160 (23.2)
Turbocharging air max temperature (engine inlet) °C (°F) 50 (122) @ 77°F amb.
Heat rejected to intercooler at maximum power kW (BTU/min) 38.5 (2191)
Intercooler system max pressure drop kPa (in. H2O) 10 (40.1)
Exhaust system
Max allowable backpressure kPa (in. Hg) 10 (2.95)
Max exhaust temperature at full load/rated speed °C (°F) 510 (950)
Exhaust flow at max output kg/h (lb/h) 1330 (2932)
Lubrication system
Minimum oil pressure at idle kPa (psi) 150 (21.75)
Max oil temperature at full load/rated speed °C (°F) 120 (248)
Engine angularity limits continuous operation: max front up and front down degrees 17
max left hand and right hand degrees 17
Total system capacity including pipes, filters etc. liters (quarts) 28 (29.6)
Cooling system
Coolant capacity (engine only) liters (quarts) 15 (16)
Water pump flow at rated speed m3/h (gal/min) 21.5 (94.7)
Heat rejected to coolant at max power kW (BTU/min) 110.8 (6307)
Thermostat (operating range) °C (°F) 83 to 95 (181 to 203)
Cooling liquid max temperature °C (°F) 105 (221)
Min/max pressure in the cooling circuit system kPa (psi) 30/160 (4.35/23.2)
Radiator max pressure drop kPa (psi) 35 (5)
Fuel system
Injection system Electronic Unit Injection (E.U.I.)
Fuel inlet max restriction kPa (in. H2O) 30 (120.3)
Fuel inlet max temperature °C (°F) 40 (104) @ 77°F amb.
Electrical system
Voltage V 24
C78 ENT FOR INDUSTRIAL APPLICATIONS
Maximum rating * kW(hp) 220 (295) 200 (268) 176 (236)
At speed rpm 2200 2200 2100
Maximum torque Nm (lb. ft) 1250 (921.9) 1150 (848.1) 1050 (774.4)
At speed rpm 1200 1200 1200
Maximum no load governed speed rpm 2400
Minimum idle speed rpm 600
Mean piston speed at rated rpm m/s (ft./s) 9.2 (30.2) 9.2 (30.2) 8.8 (28.9)
BMEP at max torque kg/cm2 (psi) 20.51 (291.92) 18.87 (268.57) 17.23 (245.21)
Available certifications EPA Tier 2 - EC 97/68 Phase 2
BSFC g/kWh (lb/hp h) @ rpm 206 (0.338) @ 1500
Oil consumption at max rating (% of fuel consumption) < 0.2
Noise at rated power (ISO 3744) dBA 94
Minimum starting temperature without aids °C (°F) -15 (+5)
Oil and oil filter maintenance interval for replacement hours 600
Dry weight (standard configuration) kg (lb) 675 (1488)
FOR INFORMATION ON THE AVAILABLE RATINGS NOT LISTED IN THIS DOCUMENT PLEASE CONTACT THE IVECO MOTORS. SALES NETWORK.
* Power at flywheel according to 97/68 EC (without fan), after 50 hours running, 3% tolerance, fuel Diesel EN 590
Test conditions : ISO 3046/1, 25 °C air temperature, 100 kPa atmospheric pressure, 30 % relative humidity - Applicable also to DIN 6271, BS 5514, SAE J1349 Standards.
220 kW (295 hp) @ 2200 rpm hp 200 kW (268 hp) @ 2200 rpm hp 176 kW (236 hp) @ 2100 rpm hp
350 469.4 350 469.4 350 469.4
300 402.3 300 402.3 300 402.3
250 335.3 250 335.3 250 335.3
Power - kW
IVECO MOTORS OFFERS THE WIDEST AVAILABILITY OF ENGINE BUILD OPTIONS TO CUSTOMER SPECIFIC REQUIREMENTS WITHIN THE ENGINE SUPPLY.
TO FIND OUT MORE ABOUT THE CONFIGURATIONS AND ACCESSORIES WHICH ARE AVAILABLE, CONTACT THE IVECO MOTORS SALES NETWORK.
HEAD OFFICE AND BRANCHES
IVECO S.p.A. Italy IVECO S.p.A. Italy Specifications subject to change without notice
Iveco Motors Iveco Motors Illustrations may include optional equipment.
Lungo Stura Lazio, 49 - 10156 Torino Viale dell’Industria, 15/17 - 20010 Pregnana Milanese - Milano
Tel. +39 (011) 0076245 - Fax +39 (011) 0076275 Tel. +39 (02) 935101 - Fax +39 (02) 93590029
www.ivecomotors.com
Publication P2G04C001U - 12.03