Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 51 views

    Auramix 400: Advanced Low Viscosity High Performance Superplasticiser, Based On Polycarboxylic Technology

    Uploaded by

    ABHI MITRA
    Auramix 400 is a high performance superplasticizer intended for applications requiring high water reduction and long workability retention. It allows production of high performance concrete or concrete with high workability. Auramix 400 combines properties of water reduction and workability retention. It is suitable for self-compacting concrete, pumped concrete, concrete requiring long workability retention, and high performance concrete. The normal dosage range is 0.2 to 1.5 liters per 100 kg of cementitious material.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Auramix 400: Advanced Low Viscosity High Performance Superplasticiser, Based On Polycarboxylic Technology

    Uploaded by

    ABHI MITRA
    51 views2 pages
    Auramix 400 is a high performance superplasticizer intended for applications requiring high water reduction and long workability retention. It allows production of high performance concrete or concrete with high workability. Auramix 400 combines properties of water reduction and workability retention. It is suitable for self-compacting concrete, pumped concrete, concrete requiring long workability retention, and high performance concrete. The normal dosage range is 0.2 to 1.5 liters per 100 kg of cementitious material.

    Original Description:

    ce

    Original Title

    TDS-Auramix-400-India2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Auramix 400 is a high performance superplasticizer intended for applications requiring high water reduction and long workability retention. It allows production of high performance concrete or concrete with high workability. Auramix 400 combines properties of water reduction and workability retention. It is suitable for self-compacting concrete, pumped concrete, concrete requiring long workability retention, and high performance concrete. The normal dosage range is 0.2 to 1.5 liters per 100 kg of cementitious material.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    51 views2 pages

    Auramix 400: Advanced Low Viscosity High Performance Superplasticiser, Based On Polycarboxylic Technology

    Uploaded by

    ABHI MITRA
    Auramix 400 is a high performance superplasticizer intended for applications requiring high water reduction and long workability retention. It allows production of high performance concrete or concrete with high workability. Auramix 400 combines properties of water reduction and workability retention. It is suitable for self-compacting concrete, pumped concrete, concrete requiring long workability retention, and high performance concrete. The normal dosage range is 0.2 to 1.5 liters per 100 kg of cementitious material.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Auramix 400 constructive solutions

    Advanced Low Viscosity High Performance


    Superplasticiser, based on Polycarboxylic
    technology
    Auramix 400 combines the properties of water reduction and
    
    Uses workability retention. It allows the production of high perfor-

    Auramix 400 is a high performance superplasticiser intended for mance concrete and/or concrete with high workability.

    applications where high water reduction and long workability Technical support
    retention are required, and it has been developed for use in:
    Fosroc provides a technical advisory service for on-site assis-
     Self-compacting concrete, tance and advice on mix design, admixture selection, evaluation

     Pumped concrete, trials and dispensing equipment.

     Concrete requiring long workability retention, Properties

    High performance concrete. Appearance : Light yellow coloured liquid

    Suitable for early strength. pH : Minimum 6.0 *

    Standard Compliance Volumetric mass @ 200 C : 1.09 kg/litre

    Auramix 400 complies with IS:9103-1999(2007). It also Chloride content : Less than 0.2% w/w as

    complies with ASTM C494 Type G depending on the dosage per IS9103

    used. Alkali content : Typically less than 1.5 g

    Advantages Na2O equivalent / litre of


    admixture.
     Low viscosity suitable for pumping of different grades of
    * The uniformity parameters like specific gravity, pH, chloride
    concrete to higher floors
    content etc. will vary for specific customer requirements and
    Suitable to use with Supplementary Cementitious Materials mix design. Please refer our MTC issued for specific product
    SCM such as GGBFS, Flyash, Ultra fine GGBFS and configuration for measuring our product parameters that will

    Microsilica. be constantly and consistently administered.

     Higher E modulus Dosage


     Improved adhesion to reinforcing and prestressing steel
    The optimum dosage of Auramix 400 to meet specific require-
     Better resistance to carbonation ments should always be determined by trials using the materi-
    als and conditions that will be experienced in use. The normal
     Lower permeability
    dosage range is between 0.2 to 1.5 ltrs/100 kg of cementitious
     Better resistance to aggressive atmospheric conditions material.

     Reduced shrinkage and creep Use at other dosages

     Increased durability Dosage outside the normal range quoted above can be used
    to meet particular mix requirements. Contact Fosroc for advice
    Description
    in these cases
    Auramix 400 is a unique combination of the latest generation
    Effects of overdosing
    superplasticisers, based on a polycarboxylic ether polymer with
    long lateral chains. This greatly improves cement dispersion. At Overdosage may cause delay in the setting time and segrega-
    the start of the mixing process an electrostatic dispersion occurs tion.
    but the cement particle’s capacity to separate and disperse.
    This mechanism considerably reduces the water demand in
    Auramix 400

    flowable concrete.

    page 1 of 2
    Auramix 400
    For further information refer the Safety Data sheet available
    Estimating
    for this product.
    Packaging
    Fire
    Auramix 400 is available in 200kg and 250kg drums and bulk
    Auramix 400 is water based and non- flammable.
    tanker.
    Cleaning and disposal
    Storage
    Spillages of Auramix 400 should be absorbed onto sand, earth
    Auramix 400 has a minimum shelf life of 12 months provided the
    or vermiculite and transferred to suitable containers. Remnants
    temperature is kept within the range of 20C to 500 C. Should the
    should be hosed down with large quantities of water.
    temperature of the product fall outside this range then contact
    local Fosroc office for advice. The disposal of excess or waste material should be carried
    out in accordance with local legislation under the guidance of
    Precautions
    the local waste regulatory authority.
    Health and safety instructions

    Auramix 400 does not fall into the hazard classifications of


    current regulations. However, it should not be swallowed or
    allowed to come into contact with skin and eyes.

    Suitable protective gloves and goggles should be worn.

    Splashes on the skin should be removed with water. In case


    of contact with eyes rinse immediately with plenty of water and
    seek medical advice. If swallowed seek medical attention im-
    mediately - do not induce vomiting.

    Important note :
    Fosroc products are guaranteed against defective materials and manufacture and are sold
    subject to its standard terms and conditions of sale, copies of which may be obtained on
    request. Whilst Fosroc endeavours to ensure that any advice, recommendation specification
    or information it may give is accurate and correct, it cannot, because it has no direct or
    continuous control over where or how its products are applied, accept any liability either
    Fosroc Chemicals directly or indirectly arising from the use of its products whether or not in accordance with
    any advice, specification, recommendation or information given by it.
    (India) Pvt. Ltd.
    Head Office telephone fax e-mail
    Embassy Point, No. 150,
    2nd Floor, Infantry Road, +91 80-42521900 +91 80-22281510 enquiry.india@fosroc.com
    Bangalore 560 001,
    Karnataka

    Regional Offices

    Chennai Mumbai Noida Kolkata


    Hills Centre,Old No 5, MBC Park, 12th floor, Office No.12B, Unit No. 601, Highway Tower-II 304, Jodhpur Park
    New No 9, 3rd Cross Street, ‘D’ Block, Near G Corp/Hyper City A-13/2, 6th Floor, Sector– 62 Kolkata 700 068
    Jeth Nagar, Raja Annamalaipuram, Kasarwadawali, Ghodbunder Road, Gautam Buddha Nagar, Ph:+91 33-65343188
    Chennai 600 028. Thane (West) 400 615 Noida 201 309, Uttar Pradesh Fax: 033-2499-0280
    Ph: +91 44 61304500 Ph: +91 22 6229 6800 Ph: +91 120 6121900
    Fax: 022 62296809 Fax: 0120-4270622

    www.fosroc.com
    page 2 of 2 INDIA/2020/0117/B

    You might also like