GEMO Ladder Editor Release Notes:: What's New in Ver 2.4 Rev A
GEMO Ladder Editor Release Notes:: What's New in Ver 2.4 Rev A
GEMO Ladder Editor Release Notes:: What's New in Ver 2.4 Rev A
Page 1/3
www.gemo.com.tr
• “GEMO AR2; 4..20mA -> 0..10V Conversion Calculator” is embedded in the editor.
• “Save as Ver 2.2” function is added in Ver 2.3.
• Configuration Contacts are added.
• Printout function is added for Configuration Contacts.
• Configuration Contacts are added in Menu Designer.
• Offset function is added for Analog and PTC inputs.
• Offsets for Analog and PTC inputs are added in Menu Designer.
• Password Contacts are added.
• Password Contacts are added in Menu Designer.
• Printout function is added for Password Contacts.
• Run Time Clock is added.
• Runtime Screens are updated to print “time” and “date” on LCD.
• Current time and date shall be altered via LCD with SET3; password = FFF1.
• Weekly Alarms (RTCWA) are added.
• Printout function is added for Weekly Alarms.
• Weekly Alarms shall be altered via LCD with SET3; password = FFF8.
• Yearly Alarms (RTCWA) are added.
• Printout function is added for Yearly Alarms.
• Yearly Alarms shall be altered via LCD with SET3; password = FFF9.
• “ErrRTC” (RTC error) is added to System Contacts.
• Automatic European Summer/Winter time update function is added.
• Simulation is updated for Password, Configuration, Weekly Alarm and Yearly Alarm
Contacts, and Runtime Screens (time and date display).
Page 2/3
www.gemo.com.tr
• Number of Counters is 32. Min. Max. Limit and Retention is added for each counter.
Maximum range is now 65535.
• Counter Comparators are added
• Fast Counters are added.
• State Machines are added.
• Front Panel F Keys are added.
• Filtered Front Panel F Keys are added.
• Analog Inputs and PTC temperature sensor inputs are added.
• Analog Comparators are added.
• System Contacts are added.
• Menu design is now 3 levels. Each level may contain up to 32 parameters. Password and
parameter row/column selection are added.
• Run Time Screens are added.
• Welcome Screen is added.
• Back light of LCD is now under user control.
• Simulation is updated for newly added and updated ladder components. LCD simulation is
added
• Retention is added.
Page 3/3
www.gemo.com.tr