BK Vibro Training Course Schedule 2021
BK Vibro Training Course Schedule 2021
BK Vibro Training Course Schedule 2021
Vibration Analyst Schedule for 2021 – Public courses in Nærum & Darmstadt
Training Course Dates 2021 in Nærum Dates 2021 in Darmstadt
(English only) (English only)
CONFIDENTIAL DOCUMENT
Page 1 of 3
Machinery Monitoring and Diagnosis courses Schedule for 2021 – USA Public courses
MD1 - Basic Protection and Condition ♦ Why use of vibration measurements, Week 23
Monitoring Training techniques and tools, off-line & on-line
June 10th
monitoring systems.
♦ Fundamentals of machine behavior. Best
practice for taking measurements.
Week 36
♦ Covering Auxiliary machines, Balance of September 9th
Plant (Rolling Element Bearing).
MD3 - Balancing Rotors in-situ Training Rigid rotor balancing Week 24 Week 37
(2 options available) ♦ Balancing using 1 or 2 planes, 4 run no June 17th September 16th
phase and overhung balancing methods.
Types of unbalance, vector review.
MD4 - Hands-on Diagnostic Seminar ♦ How to correctly diagnose machinery fault Week 25
Training conditions, including turbomachinery, suggest
June 22nd – 24th
the right recommendations and practices.
♦ Bearing types (journal and antifriction) and
related faults. Interpretation of data plots and
root cause failure analysis investigations,
many case study and exercise.
CONFIDENTIAL DOCUMENT
Page 2 of 3
Machinery Monitoring and Diagnosis courses Schedule for 2021 – EU Public courses
MD1 - Basic Protection and Condition ♦ Why use of vibration measurements, Week 7
Monitoring Training techniques and tools, off-line & on-line
February 16th
monitoring systems.
♦ Fundamentals of machine behavior. Best
practice for taking measurements.
♦ Covering Auxiliary machines, Balance of
Plant (Rolling Element Bearing).
MD3 - Balancing Rotors in-situ Training Rigid rotor balancing Week 7 Week 44
(2 options available) ♦ Balancing using 1 or 2 planes, 4 run no February 17th November 4th
phase and overhung balancing methods.
Types of unbalance, vector review.
MD4 - Hands-on Diagnostic Seminar ♦ How to correctly diagnose machinery fault Week 48
Training conditions, including turbomachinery, suggest
November 30th – December 2nd
the right recommendations and practices.
♦ Bearing types (journal and antifriction) and
related faults. Interpretation of data plots and
root cause failure analysis investigations,
many case study and exercise.
CONFIDENTIAL DOCUMENT
Page 3 of 3