PEBJ0031-14 10-27-21 Lo Res Single Pages

Cat Ground Engaging Tools
PARTS CATALOG: HMS, ERS, DGL, & LHD

Updates found in this version:
• Updated CL-1 Lip shroud retention table

• Added Shroud Deflector details for X3 Lip Shrouds
• Updated part numbers for UGM bucket 372-1780 and 249-4909
• Updated X2 Modular Lip Shrouds Table
• Added Mechanically attached Heel Shrouds table in Wear Protection Section
2 Cat® Ground Engaging Tools | PARTS CATALOG: HMS, ERS, DL AND LHD
Table of Contents
CL-1 & CL-1+ 5-12

Cast Lip Reference 6
Tip & Retention 8
Box Tip HMS 9
Coupler & Retention 10
Lip Shrouds 12
Wing Shrouds 14
X-3 15-28
Cat® Reload Cast Lip System 16
Gauges 17
Tips 18
Coupler & Retention 20
Lip Shrouds 22
Wing Shrouds 24
Dragline Cast Lip System 25
Dragline Lip Shrouds & Wing Shrouds 26
Dragline Adapters 27
X-2 29-38
Tips (C70-C95) 30
Adapter & Retention (C70-C95 Class) 32
Lip Shrouds 33
Wing Shrouds 36
Base Edge End Protection and Heel Shrouds 37
X-4 39-46
Whisler Lips 40
WH12 & WH10 Tips 41
WH12 & WH10 Adapters 42
WH12 & WH10 Lip Shrouds 43
Whisler Class Wing Shrouds 44
UNDERGROUND LOAD HAUL

DUMP LOADERS 47-90
System Options 48
WEAR PROTECTION 91-96

Laminated Wear Products 95
G.E.T. SYSTEM SALES KITS 97-98
MASTER TECH GUIDE 99
*Note: Please send all feedback to

https://dealer.cat.com/en/ps/parts/parts-mktg/get/c/form.html
Machine model availability and attachment vary by region. Please contact your local dealer for availability. 3
CAT G.E.T. SYSTEM REFERENCE
A Cast Lip G.E.T. System for HMS 6040 FS to 6090 FS
850 900 950 1050

1150
6040FS 6050 6050FS
CL-1
6060 6060FS 6090
Aftermarket G.E.T. for Cast Lip System for HMS 6040 FS to 6060 FS
C110 C130 C145
6040 FS 6050 FS 6090

6050 6060
6060 FS
X-3
Cat G.E.T. for Cast Lip System for DL 8200 to 8750

X-3
C110 C130 C145
8000 8200/8750 8750
A Fabricated Lip System for HMS 6015B to 6040
C70 C85 C95

100 mm 100 mm 140 mm
X-2
6015B 6020B 6030 FS

6018 120 mm 6040
6030
6018 FS
G.E.T. for ERS Cast Lip Systems 7295 to 7495
WH10 WH12
X-4
7295 7395
7495
G.E.T. for R1300 to R3000

Haul Dump Loaders
Underground Load
Bolt-on Tip and Mechanically

Weld On Attached Shroud
Adapter
CL-1
CAST LIP AND COMPLETE G.E.T. SYSTEM
400 TO 1,000 TON SHOVELS
Competitive Reference
Nominal
G.E.T. Class Cat Caterpillar Bucyrus Liebherr Komatsu Hitachi ESCO (Std) ESCO (XHD)
BOF (kN)
1120 C95 850 6040 RH170 R994, R9400 PC4000 EX3600/EX3600 FS 85SV2 S110
1200 850 6040 FS RH170 FS R9400 FS PC4000 FS S95 S110
1210 C110 900 6050 RH200 R995 S110 S130
1530 C130 950 6050 FS RH200 FS S130 S130
1240 C110 900/950 6060 RH340 PC5500 EX5600 S130 S130
1740 C130 950 6060 FS RH340 FS R996B EX5600 FS S130 S130
>1800 C130 950/1050 R996B FS PC5500 FS S130 S130
>1900 C145 1050/1150 R9800 PC7000, PC8000 EX8000 S145 S145
2400 C145 1050/1150 6090 FS RH400 FS R9800 FS PC8000 FS EX8000 FS S145 S145
CL-1 & CL-1+
CAST LIP REFERENCE
Cast Lips
CL-1 Lip Assby CL-1+ Lip Assby CL-1 Nose Compensator Plate Weight
Lip (A) Model Bucket Capacity
Part # Part # Size Package (kg)
444-1788 549-5534 850 4300 mm 6040 FS 20/22 m3 562-1613 6432
563-6084 563-6084 900 3760 mm – – 571-4955 4658
485-1637 549-5538 900 4300 mm 6050/6060 28/31/34 m 3
563-9677 6680
592-4619 592-4619 950 3760 mm – – 593-1405 6636
593-0355 593-0355 950 4150 mm – – 593-1407 6986
6050 FS 18/21/23/26/28 m 3
444-1781 549-5532 950 4300 mm 6060 FS 21/23/28 m3 525-7972 7419

6060 25 m3
444-1783 549-5533 950 5100 mm 6060 FS 31/34 m3 561-0770 9134
598-4518 598-4518 1050 4300 mm – – 601-2092 9190
444-1785 549-5537 1050 5100 mm 6090 FS 45 m 3
563-5740 11116
444-1784 549-5535 1050 5600 mm 6090 FS 47/52 m3 563-9711 12728
444-1787 1150 5100 mm 6090 FS 37/42 m3 563-9691 11586
CL-1 Replacement Noses Top Compensator Plate Package
Type and Size CL-1 Nose Part # CL-1+ Nose Part #

Replacement Nose Base (850) 466-7416 549-5546
Bottom Compensator Plate Package
Gauges
CL-1+ Lip As CL-1 Lip As “A” Ctr Postion “B” RH Postion “C” LH Postion “D” Nose Body “E” Nose Hole LH Lower Wing RH Lower Wing
Part# Part# Gauge Gauge Gauge Gauge Gauge Gauge Gauge
549-5534 444-1788 454-0093 454-0095 454-0094 558-2275 454-0067 – –
563-6084 N/A 563-6094 563-6095 563-6093 558-2276 492-7331 564-9916 564-9917
549-5538 485-1637 488-9998 488-9997 488-9996 558-2276 492-7331 488-9999 489-0001
592-4619 N/A – 592-4624 592-4623 558-2277 454-0069 – –
593-0355 N/A 593-0361 593-0362 593-0360 558-2277 454-0069 – –
549-5532 444-1781 454-0074 454-0076 454-0075 558-2277 454-0069 – –
549-5533 444-1783 454-0077 454-0079 454-0078 558-2277 454-0069 – –
598-4518 N/A 598-4528 598-4529 598-4526 558-2279 454-0073 598-4520 598-4522
549-5537 444-1785 454-0083 454-0085 454-0084 558-2279 454-0073 476-8866 476-8867
549-5535 444-1784 454-0080 454-0082 454-0081 558-2279 454-0073 476-8866 476-8867
549-5536 444-1787 454-0089 454-0092 454-0090 558-2278 454-0069 476-8868 476-8869
CL-1 & CL-1+
TIP & RETENTION FOR HMS
Tips
Tip A B C Weight
Type Part # Notes
Class (mm) (mm) (mm) (kg)
Penetration
145 444-1719 390 341 24 65
(Std)
145 444-1722 368 380 72 71
Abrasion
(Std)
170 444-1726 395 400 68 85
145 499-3101 421 285 18 98

A
Centerline
Tip
170 499-3102 469 347 20 138
145 510-6289 425 360 30 114
EWL Tip
170 510-6291 512 400 35 150
HD Penetration
170 495-7572 500 383 44 125
Tip (OSP)
Hardware
Tip Retainer Tip Class Tip Retainer Part Number
145 444-1754
170 444-1753
Dust Cap Tip Class Dust Cap Part Number
145 & 170 462-0764
Lifting Device Tip Class Coupler Class Lifting Device Part Number
850, 900, 950, 1050,

145T & 170T & 1150 594-2223
CL-1 & CL-1+
BOX TIP HMS
Box Tips
CL-1+
CL-1 A B C Weight
Type Tip Notes
Tip Part # (mm) (mm) (mm) (kg)
Part #
A
Box Tip
499-3103 549-5563 619 130 24 170
(850)
Box Tip
499-3110 499-3110 620 142 24 164
(900)
Box Tip
499-3104 549-5564 705 288 30 315
(950)
CL-1 & CL-1+
COUPLER & RETENTION FOR HMS
CL-1+ Couplers
Nose Base CL-1 CL-1+
A B C Weight
Type Size to Coupler Coupler Notes
(mm) (mm) (mm) (kg)
Tip Class Part # Part #
850 to 145
444-1714 549-5552 481 213 372 173
Coupler
900 to 145
492-1978 492-1978 481 213 365 166
Coupler
950 to 145
444-1715 549-5551 513 213 371 188
Coupler
950 to 170
463-1930 549-5555 524 250 371 223
Coupler
1050 to 170
444-1717 549-5553 560 250 391 257
Coupler
1150 to 170 A
444-1716 549-5554 579 250 407 316
Coupler
850 to 145
520-6352 549-5560 480 212 382 215
EWL Coupler
B C
900 to 145
510-6292 510-6292 480 212 386 208
EWL Coupler
950 to 145
510-6293 549-5556 513 212 386 238
EWL Coupler
950 to 170
510-6297 549-5557 522 250 432 270
EWL Coupler
1050 to 170
510-6298 549-5558 560 391 250 307
EWL Coupler
1150 to 170
510-6299 549-5559 579 390 250 356
EWL Coupler
CL-1 & CL-1+
Hardware
Type Nose Size Retainer Kit

850
444-1729
900
950
444-1731
950
1050 444-1730
1150 444-1731
Type Nose Size Retainer Service Kit
850
467-4637
900
950
467-4638
950
1050 467-4640
1150 467-4638
Type Nose Size 17 mm x 140 mm hex bit
All nose sizes

493-6895
(850-1150)
Type Nose Size Bolt Retainer
All nose sizes

521-7677
(850-1150)
Type Nose Size Dust Plug
All nose sizes

462-0763
(850-1150)
CL-1
LIP SHROUDS FOR HMS
Lip Shrouds
A Weight
Type Series Part # Notes
(mm) (kg)
Shroud – Lip (RH) 444-1691 257

Shroud – Lip (LH) 850 x 4300 444-1692 49 257
Shroud – Lip (Center) 444-1693 261
Performance Lip Shrouds
Shroud – Lip (RH) 485-1639 219
Shroud – Lip (LH) 900 x 4300 485-1638 75 219
Shroud – Lip (RH) 444-1696 263
Shroud – Lip (LH) 950 x 4300 444-1695 55 263
A
Shroud – Lip (RH) 444-1699 349
Shroud – Lip (LH) 950 x 5100 444-1698 55 349
Shroud – Lip ( RH) 444-1702 378
Shroud – Lip ( LH) 1050 x 5600 444-1701 56 378
EWL Shroud - Lip (LH) 513-7270 307
EWL Shroud - Lip (Center) 850 x 4300 513-7272 93 312
EWL Shroud - Lip (RH) 513-7271 307
EWL Lip Shrouds EWL Shroud – Lip (LH) 594-0531 288
EWL Shroud - Lip (CTR) 900 x 3760 594-0532 107 291
EWL Shroud - Lip (LH) 606-3440 452 EWL Shroud
950 x 3760 120
EWL Shroud - Lip (CTR) 950 x 4300 499-3109 107 344 A
EWL Shroud - Lip (Center) 1150 x 5100 603-7266 106 446
LIP SHROUDS FOR HMS
Hardware
No End Cap Config. End Cap Config.

HD
Welded Retainer Dust End Cap End
Type Series Retainer
Base Part # Plug* Retainer Caps
Part #
Shroud – Lip (RH) 444-1736 444-1752 548-4405 548-4404 N/A N/A
Shroud – Lip (LH) 850 x 4300 444-1736 444-1752 548-4405 548-4404 N/A N/A
Shroud – Lip (Center) 444-1736 444-1752 548-4405 548-4404 N/A N/A
Shroud – Lip (RH) 444-1739 444-1747 548-4405 548-4402 444-1751 444-1728
Shroud – Lip (LH) 900 x 4300 444-1739 444-1747 548-4405 548-4402 444-1751 444-1728
Shroud – Lip (Center) 444-1739 444-1747 548-4405 548-4402 444-1751 444-1728
Shroud Welded Base Shroud – Lip (RH) 444-1739 444-1747 548-4405 548-4402 444-1751 444-1728
Shroud – Lip (LH) 950 x 4300 444-1739 444-1747 548-4405 548-4402 444-1751 444-1728
Shroud – Lip (Center) 444-1739 444-1747 548-4405 548-4402 444-1751 444-1728
Shroud – Lip (RH) 444-1739 444-1747 548-4405 548-4402 444-1751 444-1728

Shroud – Lip (LH) 950 x 5100 444-1739 444-1747 548-4405 548-4402 444-1751 444-1728
Shroud Retainer Kit Shroud – Lip (Center) 444-1739 444-1747 548-4405 548-4402 444-1751 444-1728

Shroud – Lip ( RH) 444-1734 444-1750 548-4406 548-4403 N/A N/A
Shroud – Lip ( LH) 1050 x 5600 444-1734 444-1750 548-4406 548-4403 N/A N/A
HD Shroud Retainer Kit Shroud – Lip (Center) 444-1734 444-1750 548-4406 548-4403 N/A N/A
Dust Plug
950 x 3760
Shroud – Lip (LH) 444-1736 444-1752 548-4405 548-4404 N/A N/A
*Not compatible with HD retainer
CL-1
WING SHROUDS FOR HMS
Shrouds
B
Retention A Weight
Type Part # (mm)
Reference (mm) (kg)
Wing Plate
Shroud-Wing
444-1711 515 120 156
(Lower)
B
A
Shroud-Wing
444-1712 660 120 114
(Upper)
Shroud-Wing
444-1710 820 120 138
(Upper)
A
B
Shroud-Wing
444-1713 820 140 147
(Upper)
Lower Wing Shroud
Shroud-Wing
444-1708 655 140 172
(Lower X RH)
C
Shroud-Wing
444-1709 655 140 172
(Lower X LH)
A
Shroud-Wing
489-6379 290 126 109
(Lower LH)
D
Shroud-Wing
489-6380 290 126 109
(Lower RH)
Shroud-Wing
563-6089 266 96 51
(Lower LH)
B
E
Shroud-Wing
563-6090 266 96 51
(Lower RH) Upper Wing Shroud
Hardware
Retention Welded Retainer HD Retainer Shear

Type
Reference Base Kit Kit Blocks
A 444-1732 444-1747 548-4402 455-3652
B 444-1735 444-1749 N/A 455-3652
C 444-1733 444-1748 548-8010 455-3652
D 444-1739 444-1747 548-4402 455-3652

Shroud Welded Base Shroud Retainer Kit
E 563-6091 521-9461 N/A 563-6092
X-3
RETROFIT G.E.T. SYSTEM
400 TO 1000 TON SHOVELS
8000 TO 8750 DRAGLINES
Nominal
G.E.T. Class Cat Caterpillar Bucyrus Liebherr Komatsu Hitachi ESCO (Std) ESCO (XHD)
BOF (kN)
1120 C95 850 6040 RH170 R994, R9400 PC4000 EX3600/EX3600 FS 85SV2 S110
1200 850 6040 FS RH170 FS R9400 FS PC400 FS S95 S110
1210 C110 900 6050 RH200 R995 S110 S130
1530 C130 950 6050 FS RH200 FS S130 S130
1240 C110 900/950 6060 RH340 PC5500 EX5600 S130 S130
1740 C130 950 6060 FS RH340 FS R996B EX5600 FS S130 S130
>1800 C130 950/1050 R996B FS PC5500 FS S130 S130
>1900 C145 1050/1150 R9800 PC7000, PC8000 EX8000 S145 S145
2400 C145 1050/1150 6090 FS RH400 FS R9800 FS PC8000 FS EX8000 FS S145 S145
X-3
CAT RELOAD CAST LIP SYSTEM
Cast Lips
Shroud Width Weight

Lip Assby Part # Nose Size Lip (A) Model Bucket Capacity
(mm) (kg)
528-9555 C130 4300 mm 6050 FS 18 m3 431 7748
549-4981 C130 5100 mm 6060 FS 28 m3 590 9716
Repair Nose
Weight
Type Class Size Part # Notes
(kg)
Repair Nose C110 479-6691 118
C130 Nose Base (not compatible with

Repair Nose C130 430-2681 158 ESCO Sidewinder™ coupler)
Repair Nose C145 466-8149 241
C110, C130, AND C145 GAUGES
Gauges
Class A B Weight
Type Part # Notes
Size (mm) (mm) (kg)
Hammerless
C110 486-6913 – – 12
Nose Gauge
Lip Gauge C110 504-3453 – – 12
Lip Gauge C130 517-3987 – – 22
Spool &
Wedge C130 338-7325 _ _ 20 Aluminum Fabricated
Nose Gauge
453-1641 _ _ 12 Aluminum Fabricated

CapSure™
C130
Nose Gauge
465-3783 _ _ 13 Steel Welded
Lower C130
Wing Shroud C130 443-7213 213 38 12
Gauge
Lower C110
Wing Shroud C110 517-3996 146 38 5
Gauge
Location gauges on bucket

Upper C110/
with upper & lower bases
C130 C110 /
443-7214 _ _ 23
Wing Shroud C130
Gauge
Nose
C145 465-3764 _ _ 11
Gauge
Lip
C145 465-3765 _ _ 21
Gauge
X-3
C110 AND C130 CLASS TIPS
Tips
Class A B C D Weight
Type Part # Notes
Size (mm) (mm) (mm) (mm) (kg)
Centerline C110 483-7139 323 265 20 310 55
Twin
C110 490-3771 349 285 16 308 48
Spike
A
Below
Centerline
C110 497-8428 356 277 18 327 54
Twin
Spike
B D
Below
C110 476-3215 348 285 22 308 61
Centerline
Centerline C130 434-2070 381 374 41 386 99
Centerline
C130 444-5069 437 341 30 396 97
Abrasion
Centerline
C130 553-6016 437 350 40 396 132
HD
Twin
C130 359-7734 438 341 20 396 85
Spike
C110 AND C130 CLASS TIPS
Tips
Type Part # Notes
A
Below
Centerline C130 544-5011 441 340 21 380 96
Twin Spike
B D
Below
Centerline C130 434-2072 330 365 25 386 72
Wide
Below
Centerline C130 505-9938 395 352 28 380 96 C
Penetration
Specialty Parts
Type Part #
Below
Centerline C110 481-2449 348 285 22 308 63
ARM
Centerline
C130 434-2066 437 341 30 396 99
ARM
Twin Spike
C130 434-2068 438 341 25 396 86
ARM
Below
Centerline
C130 563-9724 441 340 25 380 98
Twin Spike
PTA
Below
Centerline
C130 514-7607 395 352 28 386 97
Penetration
ARM
Hardware
Type Class Size Part #
Square Drive
C110 & C130 468-8046
Plug
X-3
C110, C130, AND C145 CLASS COUPLER, ADAPTER, & RETENTION
Couplers
Class A B C Retention Wt
Type Part # Notes
Size (mm) (mm) (mm) Reference (kg)
Coupler C110 481-1281 481 280 330 A 133
Wedge
& Spool C110 479-0087(1) 396 218 292 C 103
Coupler
Coupler A
Wedge C110 479-0092(2) 505 300 350 D 129
& Spool
Coupler B
C
Wedge C110 479-0155(3) 487 263 295 B 267
& Spool
Coupler C130 504-3443 560 342 371 – 210 (1)479-0087 fits 210 mm Page Nose Base
(2)479-0092 fits 110H92TK
(3)479-0155 fits 505 Nose
Wedge
C130 286-1990 600 342 392 – 198
& Spool
Coupler C145 465-3746 556 285 454 – 273
Adapter
Class A B C D E Wt
Type Part # Notes
Size (mm) (mm) (mm) (deg) (mm) (kg)
B
Adapter
Cast C110 504-3440 160 N/A N/A 30 N/A 720
Corner LH
D A
Adapter
Cast C110 504-3441 160 N/A N/A 30 N/A 720
C
Corner RH
Adapter C110 504-3439 160 635 360 30 305 304 E
C110, C130, AND C145 CLASS COUPLER, ADAPTER, & RETENTION
Specialty Parts
Class A B C Retention Weight

Type Part # Notes
Size (mm) (mm) (mm) Reference (kg)
Coupler Uses 481-1281 coupler and

C110 481-1283 481 280 330 133
Arm 484-3626 retro fit pin
Coupler Uses 481-1281 coupler and

C110 573-8967 481 337 351 A 152
LWP 484-3626 retro fit pin
Box
C110 465-3763 598 300 364 222
Tip
505 Box Uses 479-0146 spool

C110 479-0144 592 305 356 D 203
Tip and 479-0145 wedge
Coupler C130 458-3969 560 342 371 B 212

ARM A
Coupler
C130 548-2822 560 342 371 B 231 B
LWP C
Coupler
Wedge
C130 544-5009 580 384 441 G 218
& Spool
- LWP
Hardware
Type Class Size Retention Reference Part # Weight (kg)

C110 A 484-3626 –
Retro Fit Pin C130 B 313-9498 9
C145 C 465-3753 –
D 479-0146 (505) –
C110 E 479-0089 –
Spool
F 479-0123 –
C130 G 305-4340 6
D 479-0145 (505) –
Wedge C110 E 479-0088 –
F 479-0122 –
70 mm Wedge C130 G 305-4338 9
80 mm Wedge C130 G 346-8590 10
X-3 X-3
C110, C130, AND C145 LIP SHROUDS C110, C130, AND C145 CLASS LIP SHROUDS
Lip Shrouds
Class Shroud A B C Weight

Type Part # Reference Notes
Size Deflector (mm) (mm) (mm) (kg)
Lip 527-2939 – 466-9894 760 420 160 216

Shroud C110
Center 527-2945 – 466-9895 760 450 160 230
527-2941 – 466-9894 778 420 160 220
Lip 527-2947 – 778 450 160 235

Shroud C110 466-9895
LH
527-2951 – 778 520 160 270
527-2955 – 466-9896 778 570 160 295 Shroud Deflector
527-2943 – 466-9894 778 420 160 220

A
Lip 527-2949 – 778 450 160 235

Shroud C110 466-9895
B
RH 527-2953 – 778 520 160 270
527-2957 – 466-9896 778 570 160 295
Lip
C130 552-7282 (-28) 466-9895 868 431 236 403
Shroud
Lip
C130 557-9878 (-25) 868 590 236 533
Shroud
466-9896
Lip
C145 465-3750 – 886 555 249 485
Shroud
X-3
C110 AND C130 CLASS LIP SHROUDS C110, C130, AND C145 LIP SHROUDS
Hardware
Class A B C Weight
Type Part # Notes
Size (mm) (mm) (mm) (kg)
C110 527-2938 135 234 105 9
Insert C130 552-7284 100 225 64 7
C145 517-3992 90 227 73 9
C110 527-2937 154 130 – 4
Welded
C130 465-3797 160 116 – 5
Base
C110 C130 and C145

C145 465-3797 160 116 – 5
X-3
C110 AND C130 WING SHROUDS
Wing Shrouds
A B C Weight
(mm) (mm) (mm) (kg)
Upper
C110/C130 479-0131 752 340 120 181
Wing Shroud
Upper
C130 517-3991 752 340 130 181
Wing Shroud
Upper Wing Shroud
Lower
C130 392-7140(1) 348 400 140 122
Wing Shroud
Lower Wing Shroud

Lower
C110 479-0117 275 350 115 89
Wing Shroud
Hardware
A B C Weight
(mm) (mm) (mm) (kg)
Upper
Welded C130 393-4759 213 136 38 3
Base
Lower
Welded C130 443-7203(2) 146 92 38 2
Base
Shear Block
C130 432-6607 _ _ _ 6
Upper
Shear Block
C130 443-7204 _ _ _ 6
Lower
(1) 443-7207 – 3 mm spacer for 392-7140 (2) 443-7205 – 3 mm shim used with 443-7203, 443-7206 – 6 mm shim used with 443-7203
X-3
DRAGLINE CAST LIP SYSTEM
Lips
Part Number Nose Size Lip Ref Width A (in) Nose Angle (°) Weight (kg)
469-5700 5X C130 A 170 25 9409
469-5705 5X C110 B 144 25 5077
489-5009 5X C130 C 156 25 6436
Guages
Part Type Part Number Lip Width (in)
486-6912 144
490-8845 156
Lip Shroud
491-1454 170
489-5017 190
491-1452 144
491-1452 156
LH Wing Shroud
491-1455 170
489-5018 190
491-1453 144
491-1453 156
RH Wing Shroud
491-1456 170
489-5019 190
486-6913 144
486-6913 156
Nose
453-1641 170
489-5016 190
* Reference pages 16-17 for offerings.
X-3
DRAGLINE LIP SHROUDS AND WING SHROUDS
Lip Shrouds
Weight
Type Part # Lip Reference
(kg)
A 710
Lip Shroud 465-3769 B 465 213
C 351
469-5701 A 211
Hammerless
Lip Shroud 469-5706 B 155
489-5010 C 214
Wing Shrouds
Lip Weight
Type Part #
Reference (kg)
469-5702 A 407
Hammerless Wing
Shroud LH
469-5707 B/C 194
469-5703 A 407
Hammerless Wing
Shroud RH
469-5708 B/C 194
Hardware
Type Part # ID Notes
Wedge 468-3004 Hammerless Assembly
Clamp 468-3010 Hammerless Standard 0-7mm worn
Clamp 468-3011 Hammerless Oversized 5-15mm worn
Cap 468-3008 Locking Cap
X-3
DRAGLINE ADAPTERS
Tips
Lip Wing
Part Class Weight
Type Thick- Thick- A (mm) B (mm) C (mm) D (°) E (mm)
# Size (kg)
ness (mm) ness (mm)
Center
Adapter
D A
517-2839 C130 160mm N/A 550 460 940 21 494
A
Left Center
Adapter
517-2840 C130 160mm N/A 550 460 737 21 482
Right Center
Adapter
B
517-2841 C130 160mm N/A 550 460 737 21 482
Left Hand
Corner
Adapter
517-2842 C130 160mm 140 600 N/A 706 21 559 1220
C
A Right Hand
Corner
Adapter
517-2843 C130 160mm 140 600 N/A 706 21 559 1220
Left Hand
E
Corner
Adapter
517-2847 C130 150mm 140 600 N/A 706 21 559 1200
Right Hand
Corner
Adapter
517-2848 C130 150mm 140 600 N/A 706 21 559 1200
* Reference pages 16-17 for tip offerings.

X-2
WELD-ON ADAPTER G.E.T. SYSTEM
100 TO 400 TON SHOVELS
Nominal G.E.T. Class Cat

Caterpillar Bucyrus Liebherr Komatsu Hitachi ESCO (Std) ESCO (XHD)
BOF (kN) Equivalent
Plate Lip
390 C70 (100 mm) 6015 R9100 V61 V69
490 C70 (100 mm) 6015 FS R9100 FS R9100 PC1250 EX1200 V61 V69
529 C70 (100 mm) 6015 B R9100 FS PC1250 FS EX1200 FS 70SV2 70SV2
510 C70 (100 mm) 6018 RH90 70SV2 70SV2
730 C85 (100 mm) 6018 FS RH90 FS 70SV2 70SV2
665 C85 (100 mm) 6020 PC2000 EX1900/EX1900 FS 70SV2 70SV2

PC3000/
870 C85 (120 mm) 6030 RH120 R2950 EX2600 V81 S95
PC3000 FS
R9250 FS/R9350/
920 C95 (140 mm) 6030 FS R9800 75SV2 85SV2
R9350 FS
1120 C95 (140 mm) 6040 RH170 R994, R9400 PC4000 EX3600/EX3600 FS 85SV2 S110
X-2
TIPS (C70-C95 FOR HMS)
Tips
A B C Weight
Type Part # Notes
(mm) (mm) (mm) (kg)
C70
456-5734 476 97 24 56
Penetration
C85
456-2560 495 116 25 73
Penetration
C95 A
458-0328 600 140 44 106.2
Penetration(1)
C95
579-1400 600 140 44 106.2
Penetration(1) PTA B
C70
457-0882 476 185 83 77
Abrasion
C85
456-2564 495 194 88 100
Abrasion
C95
458-0330 607 154.4 70 130.4
Abrasion
C70
457-0884 445.5 179 42 55
General Purpose
C
C85
456-2562 466 203 51 78
General Purpose
C95
458-0332 542 260 50 120.1
General Purpose
C70
555-0562 500 30 26 58
Sharp
(1)
C85 Not recommended for use with
500-3990 590 35 25 91 S95 nose
Sharp
C85
456-2568 540 135 45 100
HD Penetration
C85
HD Penetration 574-7863 540 135 45 100
ARM
C85
456-2566 486 138 100 104
Impact
C95
458-0334 591 140 100 149.6
Impact
TIPS (C70-C95 FOR HMS)
Hardware
Type Part # Weight (kg)
C70 Retaining Pin 363-9111 1
S95 Retaining Pin 371-9367 5
Gauges
Type Part # Notes
S95
489-6456 *Use for S95 Retro Fit
Rebuild Gauge*
C95
463-7225
Nose Gauge
C95
457-9759
Repair Nose
X-2
ADAPTER & RETENTION FOR HMS (C70-C95 CLASS)
Adapters
A B C D E Weight
Type Part # Notes
(mm) (mm) (mm) (deg) (mm) (kg)
C70 Adapter (RH Corner)

467-3431 100 408 324 30 214 114
Straddle Leg
C70 Adapter (LH Corner)

467-3432 100 408 324 30 214 114
Straddle Leg
C70 Adapter, Center 467-3430 100 468 275 30 214 99

B
C85 Adapter (RH Corner)
388-6375 100 520 245 30 241 158
Center Adapter Straddle Leg
D A
C85 Adapter, (LH Corner)
388-6376 100 520 245 30 241 158
Straddle Leg
C
C85 (100 mm)

388-6377 100 547 245 30 241 149
Adapter, Center
C85 Adapter E
(LH Corner) 417-4620 120 531 310 30 241 183

Straddle Leg
C85 Adapter
(RH Corner) 417-4621 120 531 310 30 241 183
Straddle Leg
C85 (120 mm) B

417-4619 120 555 325 30 241 176
Adapter, Center
Straddle Leg
Corner Adapter C95
396-4955 140 579 376 30 250 194
Adapter, Center D A
C95 Adapter
(LH Corner) 463-4154 140 576 347 30 254 202 C
Straddle Leg
C95 Adapter
(RH Corner) 463-4153 140 579 347 30 254 202
E
Straddle Leg
C95 Adapter,
380-2432 140 N/A N/A 30 N/A
Cast Corner, LH
407
C95 Adapter,
380-2433 140 N/A N/A 30 N/A
Cast Corner, RH
C85 Adapter Cast Corner LH 590-2044 120 – – 30 – 317.3

Cast Corner Adapter
C85 Adapter Cast Corner RH 590-2045 120 – – 30 – 317.3
Nose: 10 deg for all part numbers
X-2
LIP SHROUDS FOR HMS
Mechanically Attached Lip Shrouds

Thickness Width Spade
Weight
Type B A Angle Position Part # Notes
(kg)
(mm) mm) °
290 0 Center 443-4545 86
290 22 Left 443-4547 94
290 22 Right 443-4549 94
320 0 Center 483-7144 110
320 15 Right 433-1056 110

320 15 Left 433-1057 110
100 375 0 Center 437-1194 128.65
375 22 Right 456-8680 141.8
375 22 Left 456-8682 141.8
420 12.8 Right 437-1192 149.55 B
420 12.8 Left 437-1193 150
470 12.8 Left 597-3835 167.3
470 12.8 Right 597-3837 167.3

320 0 Center 589-2512 105.9
320 11 Left 589-2514 108.7
320 11 Right 589-2516 108.7
390 0 Center 488-9014 127.8

A
390 11 Left 488-9016 133.3
120 390 11 Right 488-9015 133.3
470 11.5 Right 417-4639 150
470 11.5 Left 417-4638 150
470 0 Center 417-4640 146
575 11.5 Right 417-4646 179
575 11.5 Left 417-4644 179
390 11.5 Right 396-8289 140
390 11.5 Left 396-8288 140
390 0 Center 396-8287 137
470 11.5 Right 463-4160 187
470 11.5 Left 463-4158 187

140
470 0 Center 463-4156 178
525 11.5 Left 559-7713 209
525 11.5 Right 559-7715 209
575 11.5 Left 479-0105 230
575 11.5 Right 479-0107 230
LIP SHROUDS FOR HMS
Hardware
Base
Width Boss
Edge Shroud Mounting Mounting
Type A Position Locator Notes
B Deflector Base Insert
(mm) Gauge
(mm)
Center
290 Left 447-8236
Right
Center
320 Left 464-3497
100 Right 452-8503
Center 470-6769
Welded Base
375 Left
470-6770
Right
Right
420 470-6769
Left
Right
459-9015 459-9016
470 Left 466-9895
120 Center 450-4404

Insert
Right
575 466-9896
Left
Right
390 Left 466-9894
Center
Shroud Deflector Right
140 448-4330
470 Left 466-9895
Center
Left
575 466-9896
Right
WELD-ON LIP SHROUDS
Lip Shrouds
Width Base Edge

Weight
Type Part # A Thickness Bevel C
(kg)
(mm) (mm)
550-7922 490 140 30 190
550-7926 400 100 22.5 121
B
C
550-7925 450 74 22.5 116
Modular Lip Shrouds
Width Thickness Spade Bevel

Weight
Type Part # Position A B Angle Angle Identifier Notes
(kg)
(mm) (mm) (deg) (deg)
561-2102 Center 54 0° 16 30° D
561-2103 Left 55 14° 15.5 30° E
561-2104 Right 55 100 14° 15.5 30° F
561-2105 Left 54 22° 15 30° G
561-2106 Right 54 22° 15 30° H
596-6793 Center 60 0° 20 30° J
596-6794 Left 60 120 11° 20 30° K
596-6795 Right 60 11° 20 30° L
X-2
WING SHROUDS FOR HMS
Wing Shrouds
Wing Shroud Retention A B C Weight

Type Notes
Part # Reference (mm) (mm) (mm) (kg)
415-2353 A 743 70 560 60
Pin On Wing
Shrouds
430-8480 B 975 90 443 120

C A
Hammerless
Wing Shrouds 521-9457 836 70 N/A 85
(Upper & Lower) B
Hammerless 6015B, 6020B: Use Pin On Part # 415-2353

Wing Shrouds 521-9458 C 839 90 N/A 120 6030FS, 6030BH, 6040BH: Use Pin On Part #
(Upper) 430-8480
6015B, 6020B: Use Hammerless
Hammerless Part # 521-9457
Wing Shrouds 521-9459 495 90 N/A 69 6030FS, 6030BH: Use Hammerless Part #
(Lower) 521-9458 (Upper) and
521-9459 (Lower)
Fabricated
451-4254 Welded 747 90 353 63.5
Wing Shroud
Hardware – Pin On Shrouds
Retention Shear Retainer

Type Pin
Reference Block Ring
A 468-2941 447-8235 (*kit)
466-9868
(Upper)
B 430-8484 415-3651
Shear Block Shear Block Shear Block *Retainer Kit 452-8503
(Upper) (Lower) (2 pins, 4 rings) (Lower)
Hardware – Hammerless Shrouds
Retention Shear
Type Retainer Welded Base
Reference Block
C 455-3652 521-9461 521-9460
Shroud Welded Base Retainer
BASE EDGE END PROTECTION AND SHROUDS
Beep Shrouds
BEEP
A B C Bevel
Type Part # Thickness D
(mm) (mm) (mm) Angle
(mm)
Bevel Angle D 286-2127 35 400 90 35 40
C 450-3845 23 540 100 30 35
Base Edge
437-3059 23 460 100 30 25
A End Protection
B
469-5691 40 580 120 30 50
476-3379 45 610 140 30 50
Shrouds
A B C D Wt
Type Part # Style
(mm) (mm) (mm) (mm) (kg)
416-2026 160 145 214 45 12

Curved
B STD 417-5696 250 215 300 72 39
D
438-4559 Straight 244 238 349 90 73
A C
PTA 438-4558 Straight 244 238 349 90 73
X-4
ERS WHISLER STYLE G.E.T. SYSTEM
800 TO 1,500 TON
Class (MT ) G.E.T. Class Wing

Caterpillar Bucyrus P&H Taiyuan OMZ
payload Recommended Class
EKG-10, EKG10A
150B, 150RB,151M,
WK4C,WK4D EKG-10I, EKG-10R, EKG-12
Weld-on 155B, 181M, 1600,160CL,1900, 1900A,
20-25 WH8* 7182 WK8,WK810B EKG-12.5, EKG-14, EKG-5A
or other 182M, 190B, 195B, 1900AL, 1900AL/RL, 1900ALC
WK10C, WK12 EKG-5U, EKG-8, EKG-8U,
195BI,195BII, 195R
EKG-8US, EKG-8YC
191M, 280B, 280KB, 2100, 2100B, 2199BL, 2100BLE,
30-35 290BII WK20 EKG-12A, EKG-15
290B, 290BI 2100BLM, 2100XP, 2100XPA
WH10* #8 & WH8* 192M,201M,204M, 2300, 2300LR, 2300KI, 2300MKII,
EKG-1500R, EKG-18R,
40-50 7295 291M, 295B, 295B, 2300XP, 2300XPB, 2300XPC, WK27
EKG-20
295BII, 295BIII, 295HR 2300XPLR, 2800MKI, 2800MKII
2800XP, 2800XPA, 2800XPB,
WH10* WH10* WK35 EKG-32R
2800XPC, 4100A, 4100Aplus
63
395B,395BI,295BII
WH12* #10 7395
395HR
301M,351M, 495B,
#12 7495HD
77 495BI, 495HD
WH12* 4100, 4100A, 4100ALR, 4100C
7495,7495HF 495BII,495HF,495HF2
WH12* #12
7495HF2 495HR,495HR2,595B
4100BOSS, 4100VBOSS,
4100BOSS-AC, 4100TS
WH12* WK55, WK75 EKG-50
4100XPB,4100XPC
4100XPC-AC,5700,5700XPA
90+
2800XP, 2800XPA, 2800XPB,
TLC-5.0
2800XPC, 4100A
TLC 6.25 4100BOSS, 4100VBOSS

TLC-WR 4100BOSS-AC, 4100TS,
6.25 4100XPB,4100XPC
4100XPC-AC, 5700, 5700XPA
* WH type class lip pads and wing bases are also same as Esco WH8, WH10 and WH12.

** Esco has upgraded WH10 and WH12 to Whisler Plus type with lip modifications.

X-4
WHISLER LIPS
Lips
Inside Adapter Wing

Type Part # Notes
Dimension** Positions* Sizes
214"
464-0825 10 #12
(5436 mm) A
WH12 192"
450-0618 9 #12
(4877 mm)
170"
476-7095 8 #10
(4318 mm) *Lip Shroud positions is 1 less than adapter positions
170” **Measure inside to Inside at top of wing
WH10 589-9219 8 #10
(4318 mm)
Gauges
Type Position Gauge Part # Notes
WH12 399-5770
WH10 450-1642
Adapter WH10 HD 568-2206
TLC 602-8087
WH12 399-5769
WH10 450-1641
Lip Shroud
TLC 602-8092 Use with wing shroud 571-1387
#12 457-1628
P&H #10 568-2207
#10 480-9016
Upper Wing Shroud #8 504-7533

P&H #12 568-2211
Only use in conjunction with

TLC 554-3066
Wing Shroud 554-2001
Lower Wing Shroud #12 457-1629

#10 480-9017
P&H #10 568-2208
Lower LH Wing Shroud
#8 504-7535
P&H #12 568-2212
#10 480-9018
P&H #10 568-2209

Lower RH Wing Shroud
#8 504-7534
P&H #12 568-2213
WH12 & WH10 TIPS
Tips
A B C Weight
Type Part # Notes
(mm) (mm) (mm) (kg)
Pen
456-1624 608 60 30 102
Abrasion
A
Pen
Abrasion
468-3016 608 60 30 102
with
Ceramics C
Abrasion 438-7180 572 208 98 118
Abrasion
517-1265 572 208 98 118
ARM
Impact 456-1622 513 150 98 98

B
Oil Sands
522-3916 638 74 30 97
Pen
Hardware
Type Part #
Square Drive
468-8046
Plug
X-4
WH12 & WH10 ADAPTERS
Adapters
Wear A B C D E F Wt
Type Description Part # Notes
Cap (mm) (mm) (mm) (mm) (mm) ° (kg)
A
WH12 398-3028 A 724 – 267 451 173 390
WH12 606-2376 NA 724 – 267 451 173 394

F
5 E
WH10 – HD 520-5985 B 687 – 254 451 159 412
Adapter WH10 398-3029 B 687 – 254 428 159 334 D
WH10 486-9668 B 687 – 254 428 159 0 340

C
TLC 6.25 606-2377 B 1111 – 305 451 159 0 424
WC-45 398-3040 A 301 210 – 45 – 20

A
WC-62 398-3042 A 301 210 – 62 – 28

B
WC-62 Wear
WC-62LWP 503-1306 A 301 210 – 77 – – 36
Cap
WC-53 398-3041 B 276 192 – 53 – 27
WC-62LWP
WC-53LWP 598-0634 B 276 192 – 79 – 34 D
Hardware
398-3030 Hammerless Standard (1)
Hammerless
Retainer 398-3031
Oversized (2)
HC-2
LC-12 398-3036 Hammered
(1)
0-12.5 mm worn
Hammerless
398-3032 (2)
Assembly 10-24 mm worn
398-3039 Hammered Small

Wedge
asm 398-3038 Hammered Medium
LW118 Hammered
398-3037
Large
Locking Cap 445-9448 Hammerless
WH12 & WH10 LIP SHROUDS
Lip Shrouds
A B C D Weight
Type Part # Notes
Lip Shroud
394-9744 800 254 161 101 187
WH12
A
Lip Shroud
563-3777 666 254 161 101 128 B
WH12 – Short
Lip Shroud
394-9746 668 256 130 110 136
WH10 D
Lip Shroud
521-2504 668 299 130 110 143
WH10 – Wide C
TLC Lip
562-4896 720 216 154 101 168
Shroud
Specialty Parts
A B C D Weight
Type Part # Notes
Lip Shroud
517-2867 800 254 161 101 191.5 Base Shroud 394-9744
WH12 – LWP
Hardware
Type Part # Notes
WH12
398-3027
Welded Base
WH10
481-4693
LS-12MW Welded Base
WH12
Weldless Boss 513-3426
(Cat 7495)
X-4
WHISLER CLASS WING SHROUDS
Wing Shrouds
Retention A B C Weight
#12 Upper LH 396-0582 A – 578 229 143 126
#12 Upper RH 396-0583 A – 578 229 143 126 A
#12 Lower LH 396-0584 A – 623 – – 136
#12 Upper #12 Lower
#12 Lower RH 396-0585 A – 623 – – 136
WH12PH Upper 561-0940 D – 350 – 161 131
WH12PH Lower LH 561-0941 D – 596 – – 259
B
#12 PH Upper #12 PH Lower LH #12 PH Lower RH WH12PH Lower RH 561-0942 D – 596 – – 259
#10 Upper LH 396-0589 A – 775 381 147.5 199

#10 Upper
LH and RH
#10 Upper RH 396-0590 A – 775 381 147.5 199
#10 Lower LH 396-0586 A – 652 – – 156

#10 Lower
LH and RH
#10 Lower RH 396-0587 A – 652 – – 156
WH10PH Upper 505-4301 A Common 490 240.5 120.5 124 C
Double
WH10PH Lower LH 505-4302 A 543 – – 141
Curved
#10PH Upper #10PH Lower LH #10PH Lower RH
Common Double Curved Double Curved WH10PH Lower RH Double
505-4303 A 543 – – 141
Curved
WH10PH Lower LH 505-4304 A Straight 543 – – 162 A
#10PH Lower LH #10PH Lower RH WH10PH Lower RH 505-4305 A Straight 543 – – 162
Straight Straight
#8 Upper 396-0588 B or C – 375 178 107.5 64
#8 Lower LH 396-0591 B or C – 575 – – 89
#8PH Upper Wing #8PH Lower RH and

#8 Lower RH 396-0592 B or C – 575 – – 89
Shroud LH Wing Shroud
A
TLC Wing Shroud 554-2001 350 317 142 87 B C
Specialty Parts
Retention A B C Weight
#12 Lower LH LWP 487-8671 A – 623 – – 136
#12 Lower RH LWP 487-8672 A – 623 – – 136
#12 Upper LH 558-4699 A – 677 229 142 165
#12 Upper R H 558-4700 A – 677 229 142 165
WIng Shroud 571-1387 – – 316 – 146 128 Uses 398-3027 Weld Boss
WHISLER CLASS WING SHROUDS
Hardware
Retention Weight
Type Part # Series Notes
Size (kg)
Wedge – Hammerless 454-9015 A and C #10 & 12 1.5
Wedge Hammerless 595-2484 C #8 1.3
Wedge – Wedge 434-4549 A #10 & 12 2.0

Hammerless
Wedge – Standard 434-4550 B #8 1.5
Wedge – Oversize 434-4551 B #8 1.6

Wedge
Wedge - Oversize 561-2107 A #10 & #12 1.9
P&H 12 Wing Shroud

468-3004 D P&H #12 3.9
Wedge
Spool – Hammerless 454-9006 A – 1.7
Spool 434-4553 A #10 & 12 1.7
Spool
Assembly Spool 434-4555 B #8 1.5
Spool 595-2482 C #8 2.3

Spool
P&H 12 Wing Shroud

561-0939 D P&H #12 4.2
Spool
TLC Wing Shroud Pin 554-2004 TLC 1.9 Works with 554-2001
Underground Load
Haul Dump Loaders
Cat Underground Load Haul Dump Loaders
PART NUMBERS
R1300G
Buckets: 243-5577 Bucket 2.4 M3 (3.1 YD3)
1920 mm Bucket Width
G.E.T. Required Half Life
Type Base Edge Notes
Part Numbers Description Quantity Retention Corners
Bolt On
Half Arrows 470-9311 405mm Straight Segment 2
BOHA50 470-9308 Transition Segment 2
470-9306 RH Segment 1 Half Life Corners should be installed
470-9307 LH Segment 1 8T-9079 (18) at first wear indicator line.
4K-0684 (18) 470-9312
470-9319
Bolt On 3K-9770 (18) 470-9313 Plugs are used to insert in counterbores
Half Arrows 578-9611 405mm Straight Segment 2 521-4269 (18) to keep debris out during operation.
578-9616 RH Segment 1
578-9617 LH Segment 1
Ejector buckets may require installation of Ramp Kit, 522-6219.

G.E.T. Required
Part Numbers Description Quantity
Cat Weld On
581-6911 410mm Straight Segment 2
581-6908 Transition Segment 2
578-9583
PART NUMBERS
R1300G
Buckets: 186-9278 Bucket 2.8 M3 (3.7 YD3) 513-7350 Bucket 2.5 M3 (3.4 YD3)
Bolt On
4K-0684 (18) 470-9312
470-9320

G.E.T. Required
Cat Weld On 581-6909 285mm Straight Segment 3

581-6908 Transition Segment 2 578-9584
PART NUMBERS
R1300G
Buckets: 243-6143 Bucket 3.1 M3 (4.1 YD3) 243-7054 Ejector Bucket 2.4 M3 (3.7 YD3) 157-3622 Ejector Bucket 2.8 M3 (3.7 YD3)
Bolt On
470-9310 315mm Straight Segment
Half Arrows 2
470-9311 405mm Straight Segment
BOHA50 1
470-9308 Transition Segment
2 Half Life Corners should be installed
470-9306 RH Segment
1 8T-9079 (19) at first wear indicator line.
470-9307 LH Segment
1 4K-0684 (19) 470-9312
470-9317
578-9610 315mm Straight Segment 2 521-4269 (19) to keep debris out during operation.
Half Arrows
BOHA65

G.E.T. Required

PART NUMBERS
R1300G
Bolt On
4K-0684 (21) 470-9312
470-9318

G.E.T. Required
Cat Weld On
578-9586
PART NUMBERS
R1600G
Buckets: 2 27-4702 Bucket 4.2 M3 (5.5 YD3) 203-1792 Bucket 4.8 M3 (6.2 YD3) 227-4704 Bucket 5.6 M3 (7.3 YD3)
227-4705 Bucket High Pen 4.8 M3 (6.2 YD3) 229-1676 Ejector Bucket 4.8 M3 (6.3 YD3) 514-5710 Bucket 4.2 M3 (5.8YD3)
Bolt On
Half Arrows
BOHA50
4K-0684 (22) 470-9312
578-9633
Half Arrows
BOHA65

G.E.T. Required

PART NUMBERS
R1600G
Bolt On
4K-0684 (20) 470-9312
470-9322

G.E.T. Required
Cat Weld On
578-9587
PART NUMBERS
R1600G
227-4707 Bucket High Pen 5.9 M3 (7.7 YD3)
Bolt On
Half Arrows
BOHA50
4K-0684 (24) 470-9312
470-9323
Half Arrows
BOHA65

G.E.T. Required

PART NUMBERS
R1700
Buckets: 467-1829 Bucket 6.6 M3
G.E.T. Required Half Life Base Edge
Type Notes
Part Numbers Description Quantity Retention Corners Assembly
Durilock
D50S
488-9210 Transition Segment 2 Half Life Cor-
488-9211 RH Segment 1 ners should
488-9212 LH Segment 1 be installed
Base Edge at corner
506-0802 wear out
Durilock
512-3914 315mm Straight Segment 3 507-2443 to extend
D50A
512-3915 405mm Straight Segment 2 Retention Kit service life
522-6231 /
512-3916 Transition Segment 2 One Retention of center
522-6232
512-3917 RH Segment 1 Kit Per Cast shrouds.
512-3918 LH Segment 1 Shroud Corners
522-6264 See page
Durilock 522-6265 92 for Heel
D50P Shroud Part
Numbers.
253-0064 Corner Guard RH 1

253-0065 Corner Guard LH 1 6V-6535 (4)
Corner Guards 4K-0684 (4)
511-1737 Extended Corner Guard RH 1 3K-9770 (4) For use with optional MAWPS sidebar
511-1738 Extended Corner Guard LH 1 protectors
Weld-on Cast Lip

587-4406 One Weld-on Cast lip per Segment
(WH12 EDT)
Rock Deflector
Backdrag Bar 586-5154 Weld-On Back Drag Bars 1
Sidebar Protection
32mm MAWPS Sidebar
510-0701
Protector Requires extended corner guards, sidebar
463-1401 protectors to be determined based of
2*
138-0006 bucket sidebar thickness
40mm MAWPS Sidebar (32mm/40mm)
506-0202
Protector
Lip Assembly
MAWPS Protection Layout
R1700
Bolt On
Half Arrows
BOHA50
4K-0684 (24) 470-9312
470-9326
Half Arrows
BOHA65
6V-6535 (4)
253-0064 Corner Guard RH 1 4K-0684 (4)
Corner Guards 253-0065 Corner Guard LH 1 3K-9770 (4)
521-4269 (4)
470-9314 Cast Corner RH 1

Cast Corners 470-9315 Cast Corner LH 1
R1700
G.E.T. Required

6V-6535 (4)
253-0064 Corner Guard RH 1 4K-0684 (4)
521-4269 (4)

PART NUMBERS
R1700G
Buckets: 255-9970 Bucket 5.0 M3 (6.5 YD3) 256-0378 Bucket High Pen 5.0 M3 (6.5 YD3) 256-0862 Bucket 4.6 M3 (6.0 YD3)
Type Notes
Durilock
D50S
488-9211 RH Segment 1 Half Life Cor-
488-9212 LH Segment 1 ners should be
Base Edge installed
506-0796 at corner
Durilock
512-3913 280mm Straight Segment 1 wear out to
D50A 507-2443
512-3914 315mm Straight Segment 4 extend service
Retention Kit 522-6231 /
512-3916 Transition Segment 2 life of center
One Retention 522-6232
512-3917 RH Segment 1 Cast shrouds.
Kit Per Shroud
512-3918 LH Segment 1 Corners
522-6264 See page
D50P Shroud Part
Numbers.

253-0065 Corner Guard LH 1 6V-6535 (4)
Weld-on Cast Lip

587-4406 One Weld-on Cast lip per segment
(WH12 EDT)
Rock Deflector
Sidebar Protection 32mm MAWPS Sidebar Requires extended corner guards, sidebar
510-0701
Protector protectors to be determined based of
2*
40mm MAWPS Sidebar bucket sidebar thickness
506-0202 (32mm/40mm)
Protector
Lip Assembly
R1700G
256-0862 Bucket 4.6 M3 (6.0 YD3)
Bolt On
Half Arrows
BOHA50
470-9306 RH Segment 1 6V-6535 is used for attaching the
470-9307 LH Segment 1 8T-9079 (22)
corner guards to the cast corners.
4K-0684 (22) 470-9312
470-9324
Bolt On 3K-9770 (22) 470-9313
578-9609 280mm Straight Segment 1 Plugs are used to insert in counterbores
Half Arrows 521-4269 (22)
578-9610 315mm Straight Segment 4 to keep debris out during operation.
BOHA65
6V-6535 (4)
253-0064 Corner Guard RH 1 4K-0684 (4)
521-4269 (4)

R1700G
G.E.T. Required
Cat Weld On
578-9591
6V-6535 (4)
253-0064 Corner Guard RH 1 4K-0684 (4)
521-4269 (4)

PART NUMBERS
R1700G
Type Notes
Durilock
D50S
488-9210 Transition Segment 2 Half Life
488-9211 RH Segment 1 Corners
488-9212 LH Segment 1 should be
Base Edge installed
506-0798 at corner
Durilock
512-3913 280mm Straight Segment 3 507-2443 wear out to
D50A
512-3915 405mm Straight Segment 2 Retention Kit extend service
522-6231 /
512-3916 Transition Segment 2 One Retention life of center
522-6232
512-3917 RH Segment 1 Kit Per Cast shrouds.
522-6264 See page
D50P Shroud Part
Numbers.

253-0065 Corner Guard LH 1 6V-6535 (4)
511-1737 Extended Corner Guard RH 1 For use with optional MAWPS sidebar
3K-9770 (4)
Weld-on Cast Lip

(WH12 EDT)
Rock Deflector
Sidebar Protection 32mm MAWPS Sidebar

510-0701
Protector
Requires extended corner guards, side-
463-1401 bar protectors to be determined based of
2*
40mm MAWPS Sidebar 138-0006 bucket sidebar thickness
506-0202 (32mm/40mm)
Protector
Lip Assembly
R1700G
281-0445 Bucket 5.7 M3 (7.5 YD3)
566-6471 Bucket 5.8 M3 (7.6 YD3)
Bolt On
Half Arrows
470-9311 405mm Straight Segment 2 Half Life Corners should be installed
BOHA50
470-9308 Transition Segment 2 at first wear indicator line.
470-9307 LH Segment 1 8T-9079 (24)
Plugs are used to insert in counterbores
4K-0684 (24) 470-9312
470-9325 to keep debris out during operation.
Bolt On 3K-9770 (24) 470-9313
578-9609 280mm Straight Segment 3 521-4269 (24)
Half Arrows 6V-6535 is used for attaching the
BOHA65 corner guards to the cast corners.
6V-6535 (4)
253-0064 Corner Guard RH 1 4K-0684 (4)
521-4269 (4)

R1700G
281-0445 Bucket 5.7 M3 (7.5 YD3)
566-6471 Bucket 5.8 M3 (7.6 YD3)

G.E.T. Required

6V-6535 (4)
253-0064 Corner Guard RH 1 4K-0684 (4)
521-4269 (4)

PART NUMBERS
R1700G
Buckets: 256-0386 Bucket Light Mat 8.8 M3 (11.5 YD3)

Type Notes
Durilock
D50S
488-9211 RH Segment 1 Half Life
488-9212 LH Segment 1 Corners should
Base Edge
be installed
506-0806
Durilock at corner wear
512-3914 315mm Straight Segment 6 507-2443
D50A out to extend
512-3915 405mm Straight Segment 1 Retention Kit
522-6231 / service life of
512-3916 Transition Segment 2 One Retention
522-6232 center shrouds.
512-3917 RH Segment 1 Kit Per Cast
See page 92 for
522-6264
Heel Shroud
Durilock 522-6265
512-3920 315mm Straight Segment 6 Part Numbers.
D50P

253-0065 Corner Guard LH 1 6V-6535 (4)
Weld-on Cast Lip

(WH12 EDT)
Rock Deflector
510-0701
2*
506-0202 (32mm/40mm)
Protector
Lip Assembly
R1700G

Bolt On
Half Arrows
BOHA50
470-9307 LH Segment 1 8T-9079 (27)
4K-0684 (27) 470-9312
Bolt On 3K-9770 (27) 470-9313
6V-6535 (4)
253-0064 Corner Guard RH 1 4K-0684 (4)
521-4269 (4)

R1700G

G.E.T. Required

578-9601
6V-6535 (4)
253-0064 Corner Guard RH 1 4K-0684 (4)
521-4269 (4)

PART NUMBERS
R1700K

Type Notes
Durilock 488-9207 280mm Straight Segment 1
D50S 488-9208 315mm Straight Segment 2
488-9209 405mm Straight Segment 2 Half Life
488-9210 Transition Segment 2 Corners
488-9211 RH Segment 1 should be
488-9212 LH Segment 1 installed
Base Edge
at corner
Durilock 512-3913 280mm Straight Segment 1 506-0800
507-2443 wear out
D50A 512-3914 315mm Straight Segment 2
Retention Kit to extend
512-3915 405mm Straight Segment 2 522-6231 /
One Retention service life
512-3916 Transition Segment 2 522-6232 Cast
Kit Per of center
Shroud shrouds.
512-3918 LH Segment 1 522-6264
522-6265
Durilock 512-3919 280mm Straight Segment 1 See page
D50P 512-3920 315mm Straight Segment 2 92 for Heel
512-3921 405mm Straight Segment 2 Shroud Part
512-3922 Transition Segment 2 Numbers.
253-0065 Corner Guard LH 1 6V-6535 (4)
3K-9770 (4)
Weld-on Cast Lip

(WH12 EDT)
Rock Deflector

510-0701
2*
506-0202 (32mm/40mm)
Protector
Lip Assembly
R1700K

Bolt On 470-9309 280mm Straight Segment 1
BOHA50 470-9311 405mm Straight Segment 2 Half Life Corners should be installed
470-9306 RH Segment 1 8T-9079 (24)
470-9307 LH Segment 1 Plugs are used to insert in counterbores
4K-0684 (24) 470-9312
Bolt On 578-9609 280mm Straight Segment 1 3K-9770 (24) 470-9313
Half Arrows 578-9610 315mm Straight Segment 2 521-4269 (24)
6V-6535 is used for attaching the
BOHA65 578-9611 405mm Straight Segment 2 corner guards to the cast corners.
6V-6535 (4)
253-0064 Corner Guard RH 1 4K-0684 (4)
521-4269 (4)

R1700K

G.E.T. Required

578-9593
6V-6535 (4)
253-0064 Corner Guard RH 1 4K-0684 (4)
521-4269 (4)

PART NUMBERS
R1700K

Type Notes
Durilock
D50S
installed
Base Edge
at corner
Durilock 506-0804
512-3914 315mm Straight Segment 2 507-2443 wear out
D50A
512-3915 405mm Straight Segment 3 Retention Kit to extend
522-6231 /
512-3916 Transition Segment 2 One Retention service life
522-6232 Cast
512-3917 RH Segment 1 Kit Per of center
Corners
512-3918 LH Segment 1 Shroud shrouds.
522-6264
522-6265
Durilock See page
D50P 92 for Heel
Shroud Part
Numbers.

253-0065 Corner Guard LH 1 6V-6535 (4)
Weld-on Cast Lip

(WH12 EDT)
Rock Deflector

510-0701 Requires extended corner guards, side-
Protector
2*
506-0202 (32mm/40mm)
Protector
Lip Assembly
R1700K

Bolt On
Half Arrows
BOHA50
470-9307 LH Segment 1 8T-9079 (25)
4K-0684 (25) 470-9312
Bolt On 3K-9770 (25) 470-9313
6V-6535 (4)
253-0064 Corner Guard RH 1 4K-0684 (4)
521-4269 (4)

R1700K

G.E.T. Required

6V-6535 (4)
253-0064 Corner Guard RH 1 4K-0684 (4)
521-4269 (4)

PART NUMBERS
R1700K

Type Notes
Durilock
D50S
Base Edge be installed
Durilock 506-0812 at corner
512-3913 280mm Straight Segment 6 507-2443
D50A wear out to
512-3915 405mm Straight Segment 1 Retention Kit
522-6231 / extend service
512-3916 Transition Segment 2 One Retention
522-6232 Cast life of center
512-3917 RH Segment 1 Kit Per
Corners shrouds.
512-3918 LH Segment 1 Shroud
522-6264
522-6265 See page 92 for
Durilock Heel Shroud
D50P Part Numbers.

253-0065 Corner Guard LH 1 6V-6535 (4)
Weld-on Cast Lip

(WH12 EDT)
Rock Deflector

510-0701
Protector
Requires extended corner guards, sidebar
463-1401 protectors to be determined based of bucket
2*
40mm MAWPS Sidebar 138-0006 sidebar thickness
506-0202 (32mm/40mm)
Protector
Lip Assembly
R1700K

Bolt On
Half Arrows
BOHA50 Half Life Corners should be installed
470-9306 RH Segment 1 at first wear indicator line.
470-9307 LH Segment 1 8T-9079 (27)
4K-0684 (27) 470-9312 Plugs are used to insert in counterbores
495-2178
Bolt On 3K-9770 (27) 470-9313 to keep debris out during operation.
Half Arrows
578-9611 405mm Straight Segment 1 6V-6535 is used for attaching the
BOHA65
578-9608 Transition Segment 2 corner guards to the cast corners.
6V-6535 (4)
253-0064 Corner Guard RH 1 4K-0684 (4)
521-4269 (4)

R1700K

G.E.T. Required

6V-6535 (4)
253-0064 Corner Guard RH 1 4K-0684 (4)
521-4269 (4)

PART NUMBERS
R2900G/R3000G
Type Notes
Durilock
D50S
installed
Base Edge
at corner
Durilock 506-0808
512-3913 280mm Straight Segment 4 507-2443 wear out
D50A
512-3915 405mm Straight Segment 2 Retention Kit to extend
522-6231 /
512-3916 Transition Segment 2 One Retention service life
522-6232 Cast
512-3917 RH Segment 1 Kit Per of center
Corners
512-3918 LH Segment 1 Shroud shrouds.
522-6264
522-6265
Durilock See page
D50P 92 for Heel
Shroud Part
Numbers.

253-0065 Corner Guard LH 1 6V-6535 (4)
3K-9770 (4)
Weld-on Cast Lip

(WH12 EDT)
Rock Deflector

510-0701 Requires extended corner guards, side-
Protector
2*
506-0202 (32mm/40mm)
Protector
Lip Assembly
R2900G/R3000G
303-8806 Bucket 6.4 M3 (8.4 YD3)
Bolt On
Half Arrows
BOHA50 556-9102
556-9103 6V-6535 is used for attaching the
522-6266 RH Segment 1 6V-6535 (8)
522-6267 LH Segment 1 corner guards to the cast corners.
8T-9079 (18)
4K-0684 (26) 470-9329
Bolt On Plugs are used to insert in counterbores
578-9610 315mm Straight Segment 1 3K-9770 (26)
Half Arrows to keep debris out during operation.
BOHA65 578-9614
578-9615
6V-6535 (4)
511-1737 Corner Guard RH 1 4K-0684 (4)
521-4269 (4)

R2900G/R3000G
G.E.T. Required

6V-6535 (4)
253-0064 Corner Guard RH 1 4K-0684 (4)
521-4269 (4)

PART NUMBERS
R2900G/R3000H
Type Notes
Durilock
D50S 488-9209 405mm Straight Segment 5
be installed
Base Edge at corner
Durilock 506-0810 wear out to
507-2443
D50A 512-3915 405mm Straight Segment 5 extend service
Retention Kit
512-3916 Transition Segment 2 522-6231 / life of center
One Retention
512-3917 RH Segment 1 522-6232 Cast shrouds.
Kit Per
512-3918 LH Segment 1 Corners
Shroud
522-6264 See page
522-6265 92 for Heel
Durilock Shroud Part
D50P 512-3921 405mm Straight Segment 5
Numbers.

253-0065 Corner Guard LH 1 6V-6535 (4)
Weld-on Cast Lip

(WH12 EDT)
Rock Deflector

510-0701
Protector
2*
506-0202 (32mm/40mm)
Protector
Lip Assembly
R2900G/R3000H
370-2599 Bucket 8.3 M3 (10.9 YD3)
Bolt On
BOHA50 470-9308 Transition Segment 2 556-9102
522-6266 RH Segment 1 556-9103 6V-6535 is used for attaching the
522-6267 LH Segment 1 6V-6535 (8)
corner guards to the cast corners.
8T-9079 (19)
4K-0684 (27) 470-9330
3K-9770 (27)
Half Arrows 578-9611 405mm Straight Segment 5 to keep debris out during operation.
521-4269 (27)
BOHA65 578-9608 Transition Segment 2 578-9614
578-9606 RH Segment 1 578-9615
6V-6535 (4)
511-1737 Corner Guard RH 1 4K-0684 (4)
521-4269 (4)

R2900G/R3000H
370-2599 Bucket 8.3 M3 (10.9 YD3)
G.E.T. Required
Cat Weld On
578-9597
6V-6535 (4)
253-0064 Corner Guard RH 1 4K-0684 (4)
521-4269 (4)

PART NUMBERS
R2900G/R3000H
Type Notes
Durilock
D50S
488-9212 LH Segment 1 Half Life
Corners should
Base Edge
be installed
Durilock 506-0814
512-3913 280mm Straight Segment 2 507-2443 at corner wear
D50A
512-3915 405mm Straight Segment 4 Retention Kit out to extend
522-6231 /
512-3916 Transition Segment 2 One Retention service life of
522-6232 Cast
512-3917 RH Segment 1 Kit Per center shrouds.
Corners
522-6264
See page 92 for
522-6265
Durilock Heel Shroud
D50P Part Numbers.

253-0065 Corner Guard LH 1 6V-6535 (4)
587-4406 Weld-on Cast Lip One Weld-on Cast lip per segment
(WH12 EDT)
Rock Deflector

510-0701
Protector
463-1401 protectors to be determined based of bucket
2*
40mm MAWPS Sidebar 138-0006 sidebar thickness
506-0202 (32mm/40mm)
Protector
Lip Assembly
R2900G/R3000H
Bolt On
Half Arrows
BOHA50 556-9102
522-6266 RH Segment 1 6V-6535 (8)
8T-9079 (20)
4K-0684 (28) 470-9331
BOHA65 578-9614
578-9615
6V-6535 (4)
511-1737 Corner Guard RH 1 4K-0684 (4)
521-4269 (4)

R2900G/R3000H

G.E.T. Required

578-9599
6V-6535 (4)
253-0064 Corner Guard RH 1 4K-0684 (4)
521-4269 (4)

PART NUMBERS
R2900G/R3000H
Buckets: 372-1680 Bucket 10.5 M3 (14.5 YD3) 249-4909 Bucket 3500 mm Light Mat 10.5 M3 (13.7 YD3)
Type Notes
Durilock 488-9207 Straight Standard Segment - Small 2
D50S 488-9208 315 mm Straight Standard Segment - Medium 3
488-9209 405 mm Straight Standard Segment - Large 2 Half Life
488-9210 Transition Segment 2 Corners
488-9211 Corner Segment - RH 1 should be
488-9212 Corner Segment - LH 1 installed
Base Edge
at corner
Durilock 512-3913 Straight Standard Segment - Small 2 605-3921
507-2443 (11) wear out
D50A 512-3914 315 mm Straight Standard Segment - Medium 3
Retention Kit to extend
512-3915 405 mm Straight Standard Segment - Large 2 522-6231 /
One Retention service life
512-3916 Transition Segment 2 522-6232 Cast
Kit Per of center
512-3917 Corner Segment - RH 1 Corners
Shroud shrouds.
512-3918 Corner Segment - LH 1 522-6264
522-6265
Durilock 512-3919 Straight Standard Segment - Small 2 See page
D50P 512-3920 315 mm Straight Standard Segment - Medium 3 92 for Heel
512-3921 405 mm Straight Standard Segment - Large 2 Shroud Part
512-3922 Transition Segment 2 Numbers.
512-3923 Corner Segment - RH 1
512-3924 Corner Segment - LH 1
253-0064 Corner Guard RH 1 6V-6535 (4)
253-0065 Corner Guard LH 1 4K-0684 (4)
Corner Guards 511-1737 Extended Corner Guard RH 1 3K-9770 (4) For use with optional MAWPS sidebar
511-1738 Extended Corner Guard LH 1 521-4269 (4) protectors
One Weld-on Cast lip per

Weld-on Cast Lip
587-4406 segment
(WH12 EDT)
Rock Deflector
510-0701
2*
506-0202 (32mm/40mm)
Protector
Lip Assembly
R2900G/R3000H
249-4909 Bucket 3500 mm Light Mat 10.5 M3 (13.7 YD3)
Bolt On
Half Arrows
BOHA50 556-9102
556-9103 Half Life Corners should be installed
522-6266 RH Segment 1 6V-6535 (8)
522-6267 LH Segment 1 at first wear indicator line.
8T-9079 (20)
4K-0684 (28) 470-9332
BOHA65 578-9614
578-9615
6V-6535 (4)
511-1737 Corner Guard RH 1 4K-0684 (4)
521-4269 (4)

R2900G/R3000H
249-4909 Bucket 3500 mm Light Mat 10.5 M3 (13.7 YD3)
G.E.T. Required

578-9600
6V-6535 (4)
253-0064 Corner Guard RH 1 4K-0684 (4)
521-4269 (4)

PART NUMBERS
R2900G/R3000H
Buckets: 249-4928 Bucket 3800 mm Light Mat 11.5 M3 (15.0 YD3) 250-2036 Bucket 11.6 M3 (15.2 YD3)
Type Notes
Durilock
D50S
488-9212 LH Segment 1 Half Life Corners
should be
Base Edge
installed
Durilock 506-0818
512-3914 315mm Straight Segment 3 507-2443 at corner wear
D50A
512-3915 405mm Straight Segment 4 Retention Kit out to extend ser-
522-6231 /
512-3916 Transition Segment 2 One Retention vice life of center
522-6232 Cast
512-3917 RH Segment 1 Kit Per shrouds.
Corners
522-6264
See page 92 for
522-6265
Durilock Heel Shroud Part
D50P Numbers.

253-0065 Corner Guard LH 1 6V-6535 (4)
Weld-on Cast Lip One Weld-on Cast lip per

587-4406
(WH12 EDT) segment
Rock Deflector
510-0701
Protector
463-1401
2* protectors to be determined based of bucket
40mm MAWPS Sidebar 138-0006
506-0202 sidebar thickness (32mm/40mm)
Protector
Lip Assembly
R2900G/R3000H
Buckets: 249-4928 Bucket 3800 mm Light Mat 11.5 M3 (15.0 YD3) 250-2036 Bucket 11.6 M3 (15.2 YD3)
Bolt On
Half Arrows
BOHA50 556-9102
522-6266 RH Segment 1 6V-6535 (8)
8T-9079 (22)
4K-0684 (30) 470-9333
BOHA65 578-9614
578-9615
6V-6535 (4)
511-1737 Corner Guard RH 1 4K-0684 (4)
521-4269 (4)

R2900G/R3000H
Buckets: 249-4928 Bucket 3800 mm Light Mat 11.5 M3 (15.0 YD3)
250-2036 Bucket 11.6 M3 (15.2 YD3)
G.E.T. Required

578-9602
6V-6535 (4)
253-0064 Corner Guard RH 1 4K-0684 (4)
521-4269 (4)

Wear Protection
Cat Wear Protection
PART NUMBERS
Wear Protection Options

Wear Buttons
Part Number Description A (mm) B (mm) Wt (kg) Notes
280-4092 Circular 64 22 0.5
280-4093 Circular 89 29 1.2
280-4094 Circular 114 33 2.3
280-4095 Circular 152 35 4.2
494-8981 Tear Drop Shape 76 25 1.0

Bolt Saver
Part Number A (mm) = OD B (mm) C (mm) = ID Wt (kg) Notes
345-8061 114 33 79 1.1
Chocky Bars
Part Number A (mm) B (mm) C (mm) Wt (kg) Notes
494-8979 25 1.1
280-4088 38 1.6
280-4089 241 51 2.2

25
280-4090 64 2.7
Note: C
hocky Bars can be bent and welded
280-4091 102 4.4
onto curved surfaces.
483-8264 363 165 11.0
Roll Bars
280-4096 229 38 32 1.6
280-4097 32 51 51
280-4098 305 69 78 10.4
494-8980 114 127 30.2
Tungsten Sidebars
Part Number Diameter (mm) Length (mm) Wt (kg) Overlay Type Notes
519-8926 51 22.3
519-8927 76 1,219 48.2 PTA
519-8928 127 127.7
PART NUMBERS

6 x 8" Wear Block
280-4099 203 38 152 8.9
6 x 8" Bi-Metallic Wear Block

494-8988 203 38 152 8.2
11" Trapezoidal Wear Block

Part Number A (mm) B (mm) C, C2 (mm) Wt (kg) Notes
494-8987 279 41 178, 292 19.3
4 x 8.5" Skid Wear Block

494-8985 216 34 102 5.4
Wear Patch Block
Note: W
ear patch blocks
494-8984 102 11 76 1.0 can be plug welded to
eliminate gaps.
6 x 8" Manganese Wear Block
494-8983 203 38 152 9.1
Manganese Wear Bar
494-8982 241 25 51 2.4
Wear Lug
494-8986 152 29 28 0.9
PART NUMBERS

Heel Shrouds
Part Number Description A (mm) B (mm) C (mm) D (mm) Weight (kg) Notes
157-1019 Straight 254 203 269.0 50 29
138-6529 Straight 178 152 203 41.0 14
138-6551 Curved 178 152 203 41.0 14
157-1027 Curved 254 203 269.0 50 29
280-4078 Straight 119 102 152 25 5
280-4079 Curved 119 102 152 25 5
MAWPS (Mechanically Attached Wear Protection System)
Wear Plate
Series Wear Plate Type Part Number A (mm) B (mm) Thickness (mm) Weight (kg) Notes
20 Series 138-0022 225 200 35 6.42
20 Heavy Duty 138-0023 225 200 50 10.85
20 Heavy Duty (ARM) 264-2195 225 200 50 10.85
30 Standard 138-0032 275 200 45 9.67
30 Standard (ARM) 229-7067 275 200 45 9.67
30 Heavy Duty 138-0033 275 200 60 14.8
40 Standard 138-0042 275 200 60 13.28
40 Heavy Duty 138-0043 275 200 75 18.7
50 Standard 138-0052 300 250 75 25.08
50 Heavy Duty 138-0053 300 250 100 37.75
Base Plate
Series Part Number A (mm) B (mm) Thickness (mm) Weight (kg) Notes
20 138-0020 200 160 18 2.43
30 138-0030 225 160 22 3.72
40 138-0040 235 160 29 4.61
50 138-0050 235 200 29 6.08
Skeletal
Series Part Number A (mm) B (mm) Thickness (mm) Weight (kg) Notes
Standard 138-0024 202 310 35 5.9
Heavy
138-0025 207 310 45 8.4
Duty
Hardware
Type Part Number Series Notes
Retainer 138-0006 10-40
Retainer 138-0007 50
Retainer Plug 275-5444 All Part number 138-0006 is compatible with Skeletal MAWPS
Auxiliary Bucket Protection - Heel Shrouds
Mechanically Attached Heel Shrouds
Part Name Part Number Quantity Notes
MAWPS Heel Shroud Cover 465-2006 14
MAWPS Spring 138-0007 14
MAWPS Straight Heel Shroud Base 465-2004 6
MAWPS Curved Heel Shroud Base 465-2005 8
Cat Wear Protection
WEAR PRODUCT STANDS
The specially designed stands are engineered to support over 2,500 pounds of wear products. These stands come
with integrated fork lift tubes for easy loading and moving. Reflective decals improve visibility. These stands provide
a great means for selling, storing, and showcasing wear options. They can be placed at the point of use (parts store,
warehouse, weld shop, fabrication shop) for easy storage or consignment plans. Finished with black gloss paint.
Stands
Height Depth Max Width Weight Empty
Part # Description Notes
(mm) (mm) (mm) (kg)
Recommended stocking for a full stand.
495-0370 5' 5" Full Display Stand 1757 282.1
This allows for display of all types of
619 1924 parts and enough quantity to perform
495-0371 3' 0" Half Display Stand – 174.2 layout checks.
Part # Description Quantity
494-8979 1" Chocky Bar 10
280-4088 1.5" Chocky Bar 10
280-4089 2" Chocky Bar 10
280-4090 2.5" Chocky Bar 10
280-4091 4" Chocky Bar 10
483-8264 6.5" Chocky Bar 4
280-4092 2.5" Wear Button 10
494-8981 3" Tear Drop Wear Button 10 Half Stand

280-4093 3.5" Wear Button 10
280-4094 4.5" Wear Button 8 Full Stand
280-4095 6" Wear Button 4
280-4096 1.5" Roll Bar 10

280-4097 2" Roll Bar 10
280-4098 3" Roll Bar 6
494-8980 5" Roll Bar 2
280-4099 6 x 8" Wear Block 2
494-8984 3 x 4" Wear Patch Block 6
494-8987 11" Trapezoidal Wear Block 2
494-8985 4 x 8.5" Skid Wear Block 6

494-8988 6 x 8" Bi-Metallic Wear Block 2
494-8986 1" Wear Lug 10
345-8061 Bolt Saver 6
494-8982 2" Manganese Wear Bar 10
494-8983 6 x 8" Manganese Wear Block 2
G.E.T. System Sales Kits
Kits
Sales Kit Part # Description Kit Contains:
• One cast lip

• One adapter
• One wear cap
475-3783 X-4 Kit • One spool
• One wedge
• Five tip options
Use for WH12 and WH10 G.E.T. Systems
• One cast lip

• One side bar section
• One coupler
475-3782 X-3 Kit • One lip shroud
• Two wing shrouds
• Six tip options
Use for C110, C130, C145 G.E.T. Systems
• One base edge with

attached side bar
• One straddle leg adapter
475-3784 X-2 Kit • One center adapter
• One lip shroud
• One wing shroud
• Five tip options
Use for C70, C85, and C95 G.E.T. Systems
• One cast lip section

• One side bar section
• One coupler
475-3785 CL-1 Kit • One lip shroud
• One box point tip
• Two wing shrouds
• Three tip options
Use for all CL-1 G.E.T. Systems
• Functional D50S Shroud

• D50S Lip Assembly
600-0603 Durilock Kit
™
• D50A Lip Assembly
• D50P Lip Assembly
Durilock™ Kit
G.E.T. System Sales Kits
WEAR PROTECTION

Wear Protection Kit
Type Part Number
Wear
Button
Wear
PEEPJ9260-02
Block
Chocky
Block
Note: C
hocky Bars can be bent and
welded onto curved surfaces.
Chocolate Chocky Bar

500 piece minimum
Size – 9.5" x 1.5" x .5"
4 oz.
Dark or Milk Chocolate
Customize the wrapper with your dealer logo!

Contact your MPC Sales Rep for more info!
1•866•451•4631 I www.mpcpromotions.com/catmerchandise
Master Tech Guide
SHOVELS
Hydraulic Mining Shovels

Special Instruction
Type G.E.T. Size Title
Media Number
Procedure for Welding Adapters to Base Edge of
REHS8326
Hydraulic Shovel Buckets
X-2 C70-C95 M0087404 X-2 R&I Guide (Replaces BI637619)
M0075252 X-2 Maintenance Guide
M0082953 X-3 R&I Guide – (Replaces BI020003)
X-3 C110-C145 M0082949 X-3 Maintenance Guide
M0082947 X-3 Reload Cast Lip Installation Manual
M0066304 CL-1 – Master Document
M0066210 CL-1 – Cast Lip Installation Manual
M0066306 CL-1 – Lip Shroud Mounting Boss Welding lnstruction
M0066308 CL-1 – Wing Shroud Mounting Boss Welding lnstructions
CL-1 W850-W1150 M0066310 CL-1 – Shear Block Welding lnstructions
M0066312 CL-1 – Maintenance Guide
M0066314 CL-1 – Repair Guide
M0066316 CL-1 – Welding Appendix
M0087406 CL-1 – Wear Plating
Electric Rope Shovels
Special Instruction
Media Number
X-4 WH10 & 12 BI637394 Whisler 10/12 Lip G.E.T. Special Instruction
Dragline
Special Instruction
Media Number
M0075250 Dragline G.E.T. R&I Guide

X-3 C110-C145
M0075248 Dragline G.E.T. Maintenance Guide
Special Instruction
Special Instruction
Title
Media Number
GEBI0311 Replacement Procedure for Lip Assemblies (with CAT G.E.T. installed) and Wear Plates on Face Shovel Buckets
GEBI0313 Replacement Procedure for Lip Assemblies (with CAT G.E.T. installed) and Wear Plates on Back Hoe Buckets
GEBI03 l 8 Replacement Procedures and Maintenance Interval Schedules Dragline Buckets
PEBJ0031-14
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at
www.cat.com
© 2021 Caterpillar. All Rights Reserved.
CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Yellow”, the “Power Edge” and Cat
“Modern Hex” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and
may not be used without permission.

PEBJ0031-14 10-27-21 Lo Res Single Pages

Uploaded by

Copyright:

Available Formats

PEBJ0031-14 10-27-21 Lo Res Single Pages

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

PEBJ0031-14 10-27-21 Lo Res Single Pages

Uploaded by

Copyright:

Available Formats

Cat Ground Engaging Tools

PARTS CATALOG: HMS, ERS, DGL, & LHD

• Updated CL-1 Lip shroud retention table

CL-1 & CL-1+ 5-12

UNDERGROUND LOAD HAUL

WEAR PROTECTION 91-96

G.E.T. SYSTEM SALES KITS 97-98

MASTER TECH GUIDE 99

*Note: Please send all feedback to

850 900 950 1050

6060 6060FS 6090

C110 C130 C145

6040 FS 6050 FS 6090

Cat G.E.T. for Cast Lip System for DL 8200 to 8750

C110 C130 C145

8000 8200/8750 8750

A Fabricated Lip System for HMS 6015B to 6040

C70 C85 C95

6015B 6020B 6030 FS

G.E.T. for ERS Cast Lip Systems 7295 to 7495

G.E.T. for R1300 to R3000

Bolt-on Tip and Mechanically

1200 850 6040 FS RH170 FS R9400 FS PC4000 FS S95 S110

1210 C110 900 6050 RH200 R995 S110 S130

1530 C130 950 6050 FS RH200 FS S130 S130

1240 C110 900/950 6060 RH340 PC5500 EX5600 S130 S130

1740 C130 950 6060 FS RH340 FS R996B EX5600 FS S130 S130

>1800 C130 950/1050 R996B FS PC5500 FS S130 S130

>1900 C145 1050/1150 R9800 PC7000, PC8000 EX8000 S145 S145

444-1781 549-5532 950 4300 mm 6060 FS 21/23/28 m3 525-7972 7419

CL-1 Replacement Noses Top Compensator Plate Package

Type and Size CL-1 Nose Part # CL-1+ Nose Part #

549-5534 444-1788 454-0093 454-0095 454-0094 558-2275 454-0067 – –

563-6084 N/A 563-6094 563-6095 563-6093 558-2276 492-7331 564-9916 564-9917

549-5538 485-1637 488-9998 488-9997 488-9996 558-2276 492-7331 488-9999 489-0001

592-4619 N/A – 592-4624 592-4623 558-2277 454-0069 – –

593-0355 N/A 593-0361 593-0362 593-0360 558-2277 454-0069 – –

549-5532 444-1781 454-0074 454-0076 454-0075 558-2277 454-0069 – –

549-5533 444-1783 454-0077 454-0079 454-0078 558-2277 454-0069 – –

598-4518 N/A 598-4528 598-4529 598-4526 558-2279 454-0073 598-4520 598-4522

549-5537 444-1785 454-0083 454-0085 454-0084 558-2279 454-0073 476-8866 476-8867

549-5535 444-1784 454-0080 454-0082 454-0081 558-2279 454-0073 476-8866 476-8867

549-5536 444-1787 454-0089 454-0092 454-0090 558-2278 454-0069 476-8868 476-8869

145 444-1722 368 380 72 71

170 444-1726 395 400 68 85

145 499-3101 421 285 18 98

170 499-3102 469 347 20 138

145 510-6289 425 360 30 114

170 510-6291 512 400 35 150

Tip Retainer Tip Class Tip Retainer Part Number

Dust Cap Tip Class Dust Cap Part Number

145 & 170 462-0764

850, 900, 950, 1050,

Type Nose Size Retainer Kit

All nose sizes

Type Nose Size Bolt Retainer

All nose sizes

Type Nose Size Dust Plug

All nose sizes

Shroud – Lip (RH) 444-1691 257