Netup Streamer DVB 8Xc: User Manual
Netup Streamer DVB 8Xc: User Manual
Netup Streamer DVB 8Xc: User Manual
Contents
Introduction ............................................................................ 3
Appearance and illustration ................................................................................................... 3
Specifications ......................................................................................................................... 4
Installation guide ..................................................................... 5
Device’s installation flow chart .............................................................................................. 5
Packing list check ................................................................................................................... 5
Safety instructions ................................................................................................................. 5
Environment requirement ..................................................................................................... 6
Grounding requirement ......................................................................................................... 6
WEB NMS Operation ............................................................... 7
Login ....................................................................................................................................... 7
Summary → Status................................................................................................................. 8
Parameters → Tuner .............................................................................................................. 8
Parameters → CI Card ............................................................................................................ 9
Parameters → TS Config ........................................................................................................ 9
Parameters → Modulator .................................................................................................... 12
Parameters → IP Stream ...................................................................................................... 13
System → Network .............................................................................................................. 13
System → Configuration ...................................................................................................... 14
System → Firmware ............................................................................................................. 14
System → Date | Time ......................................................................................................... 14
System → Log ....................................................................................................................... 15
Troubleshooting.........................................................................................16
2
NetUP Streamer DVB 8xC. User manual
Introduction
NetUP Streamer DVB 8xC is a high performance and cost-effective DVB-C modulator. It has 8 DVB-S2
tuner inputs, after multiplexing and modulating process, then it gives 4 RF output. To meet
customers’ various requirements, this device is also equipped with 128 IP input and 4 MPTS output
over UDP and RTP. Its pluggable structure design greatly facilitates the change of modules as needed.
Moreover, the four CAMs/CIs accompanied can descramble the programs input from 8 Tuner inputs.
NetUP Streamer DVB 8xC can be upgraded and controlled through network system.
Front panel:
1 Power Indicator
2 RF output interface
3 DATA port and NMS port for network management connection
Rear panel:
1 Module 1: 2 CAMs /Smart card slots and 2 RF signal input and loop-through
2 Module 2: 2 CAMs /Smart card slots and 2 RF signal input and loop-through
3 4 FTA tuner input interface
4 Power switch, fuse, power socket
5 Grounding pole
3
NetUP Streamer DVB 8xC. User manual
Specifications
Input 8×DVB-S2; 128×IP(SPTS/MPTS) over UDP and RTP;
RJ45, 1000 М /100 М Unicast/Multicast
Tuner DVB-S Input frequency 950-2150MHz
Symbol rate 2-45Msps
Signal strength -65~-25dBm
FEC Demodulation 1/2, 2/3, 3/4, 5/6, 7/8 QPSK
Input frequency 950-2150MHz
DVB-S2 Input frequency 950-2150MHz
Symbol rate QPSK 1~45Mbauds;
Code rate 8PSK 2~30Mbauds
Constellation 1/2, 3/5, 2/3, 3/4, 4/5, 5/6,
8/9, 9/10
Descrambling CAM/CI Quantity 4
Multiplexing Maximum PID 256 per input channel
Remapping
Function PID Remapping
Accurate PCR adjusting
Generate PSI/SI table automatically
Modulation DVB-C Standard J.83A (DVB-C), J.83B,
MER ≥43dB
RF frequency 30~960MHz, 1KHz step
RF output level -25~ -1dbm (77~97 dbµV),
0.1db step
Symbol rate 5.000~7.000Msps
adjustable
RF Out 4×DVB-C adjacent carriers
combined output
J.83A Constellation 16/32/64/128/ 256 QAM
Bandwidth 8M
Output 4×MPTS over UDP and RTP (RJ45, 1000 М /100 М Unicast/Multicast)
Other parameters Operate and update Network management software (NMS)
Dimension (W×L×H) 482 mm × 300 mm × 44,5 mm
Approx. weight 3,7 kg
Temperature 0-45℃ (operation); -20-80℃ (storage)
Power requirements AC 100V; 220V±10%, 50/60Hz
Power consumption 25W
4
NetUP Streamer DVB 8xC. User manual
Installation guide
Device’s installation flow chart
Connecting
Packing list Installing grounding Connecting Setting Running
check device wire and signal cable parameter device
power cord
Before installing and connecting the device, carefully read the environment and
grounding requirements, as well as safety instructions for the sake of your safety and for
the safety of the device
Safety instructions
• Before installing and connecting the device make sure that the device was not damaged during
delivery.
• Install the device in an appropriate place. The device is designed to work in a clean and dry room.
It must be operated and maintained free of dust.
• Before switching on the device make sure that it is adjusted to the mains voltage you intend to
use. Make sure that you keep within the specifications – AC 100V-220V±10%, 50/60Hz.
• Check that all the cables are connected properly. Connect cables only to a device that is turned
off.
5
NetUP Streamer DVB 8xC. User manual
Environment requirement
Item Requirement
Room space When installing a rack in the room, make sure the distance between two
rows of racks is 1.2~1.5m and the distance to the wall is at least 0.8m.
Room floor Electric isolation. Dust free. The volume resistivity of ground anti-static
material: 1×107~1×1010 Ω. Grounding current limiting resistance: 1M (Floor
bearing should be greater than 450Kg/m2).
Environment 5~40℃ (sustainable), 0~45℃ (short time).
temperature Installing air-conditioning is recommended.
Relative temperature 20%~80% (sustainable); 10%~90% (short time).
Pressure 86~105KPa
Door & window Install rubber strip for sealing door-gaps and dual level glasses for windows
Walls Can be covered with wallpaper or dark paint.
Fire protection Fire alarm system and extinguisher.
Power The device requires AC 100V; 220V±10%, 50/60Hz.
Please carefully check before running.
Grounding requirement
• Connect the ground wire to the grounding hardware on the device. Ground resistance should be
no more than 1 Ω
6
NetUP Streamer DVB 8xC. User manual
Login
Connect a personal computer and the device with net cable, and use ping command to confirm they
are on the same network segment.
Make sure that the computer’s IP address is different from the device’s IP address;
otherwise, it would cause an IP conflict
The default IP address of NetUP Streamer DVB 8xC is 192.168.0.136 or 10.0.0.103. Thus, set the
computer’s IP address to 192.168.0.X or 10.0.0.X, where X can be from 0 to 255, except 136 or 103.
Open a web browser, enter the device’s IP address in the browser address bar and press Enter. If the
network is configured correctly, you will see the login interface (Figure 1).
Enter username and password and click LOGIN to enter the web interface. Default username is
“admin”, default password is “admin”.
Figure-1
7
NetUP Streamer DVB 8xC. User manual
Summary → Status
After login, you will get the Status page which displays the current system status (Figure-2).
System information
Figure-2
Parameters → Tuner
Use the Tuner page to configure the input tuner parameters to receive satellite signals (Figure-3).
Figure-3
8
NetUP Streamer DVB 8xC. User manual
Parameters → CI Card
NetUP Streamer DVB 8xC supports 4 CI cards to descramble programs from Tuner input. Use the CI
Card page to configure the available CI cards (Figure-4).
Select a card
Descramble area
Figure-4
CI TS Mode You can apply one CI card to descramble programs from the two Tuner
input signal sources.
“Skip CI card” means to skip the card which is used for FTA stream
CI Max Bitrate CI Max Bitrate options range from 48 to 108Mbps. Select a value in
the list as principle:
actual input bitrate ≤ max bitrate ≤ CI max decrypting capacity
CI Card Error Check You can decide whether to enable the card error check function by
checking the box
Set config Apply the input data
Set program Parse programs from the channel selected in “Input Source”. The
available programs will be listed in the “Descramble area”
Set descramble Descrambler programs. The descrambled program quantity depends
on the CAM/CI performance you apply to
Parameters → TS Config
Use the TS Config page to configure the TS output parameters and select one of the following tabs:
Output TS, Stream Select, General, PID Bypass.
9
NetUP Streamer DVB 8xC. User manual
Output TS
Select the Output TS X tab to open the list of available TS channels. Click one of the channels to select
it (Figure-5).
Select a tab
Figure-5
Stream Select
Select the Stream Select tab to select streams that should be sent to Mux out (Figure-6).
Operation area
Parse programs
Figure-6
10
NetUP Streamer DVB 8xC. User manual
Operation area:
CA Filter filter or not filter the source CA information
===> / <=== move programs between the input and the output areas
General
Select the General tab to edit common parameter for output streams (Figure-7).
Confirm
changes
Figure-7
11
NetUP Streamer DVB 8xC. User manual
PID Bypass
Select the PID Bypass tab to edit the list of PIDs that should pass through (Figure-8).
Figure-8
Parameters → Modulator
Use the Modulator page to edit RF output parameters (Figure-9).
Quick config
Channel config
Figure-9
12
NetUP Streamer DVB 8xC. User manual
Parameters → IP Stream
NetUP Streamer DVB 8xC supports TS IP output (4×MPTS) via the DATA port. Use the IP Stream page
to set IP output parameters (Figure-10).
Figure-10
System → Network
Use the Network page to edit networking parameters (Figure-11).
Figure-11
13
NetUP Streamer DVB 8xC. User manual
System → Configuration
Use the Configuration page to save or restore system configuration, to revert to factory settings, to
work with backups or to load configurations (Figure-12).
Select a tab
Figure-12
System → Firmware
Use the Firmware page to update firmware for the device (Figure-13).
Figure-13
Figure-14
14
NetUP Streamer DVB 8xC. User manual
System → Log
Use the Log page to see system logs (Figure-15).
Figure-15
15
NetUP Streamer DVB 8xC. User manual
Troubleshooting
Check the following before troubleshooting:
• Whether the server room is well ventilated and hot air from the back panel of the device is
effectively removed?
• Does the supply voltage meet the power requirements of the device?
• Is the RF output level vary within the tolerant range?
• Are all cables connected correctly?
Turn off the device and unplug the power cord in the following cases:
• The power cord or socket is damaged.
• A liquid is splashed on the device.
• A short circuit has occurred.
• The device is in damp environment.
• The device suffered from physical damage.
• Longtime idle.
• After switching on and restoring to factory setting, device still cannot work properly.
• Maintenance needed.
Frequent on and off switching is prohibited; the interval between switching the device on
and off must be more than 10 seconds
16