Nothing Special   »   [go: up one dir, main page]

cAPXLac 210954

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

cAP XL ac

The ceiling AP on steroids!

Our bestseller cAP is back – juiced up and stronger than ever.


Compared to the previous cAP models, the improved high-gain
antenna increases the covered area by up to 100%!

Dual-band, Gigabit Improved high-gain PoE-in, Inconspicuous


dual-chain Ethernet antenna PoE-out and compact
Need a nice-looking access point that won’t get in your way? Or
perhaps you’re managing the network in a crowded place and don’t
want everyone to have physical access to the device? Either way
– ceiling is the answer! The “XL” in the name is only referring to
the antenna within – the new cAP is a pretty compact device that
attracts less attention than a smoke sensor. Your clients, guests, or
colleagues won’t even notice it. But they will definitely notice the
blazing fast wireless connection all across the premises.

The new design features a larger high-gain antenna, higher sensitivity, and a built-in reflector.
These improvements allow increasing the covered area by up to 100%, compared to the previous
cAP models!

The dual-band, dual-chain 2.4 and 5 GHz wireless radio provides a strong coverage in 360 degrees
around it, so you don’t have to worry about the placement of the device so much. Putting it on the
ceiling eliminates many signal absorption problems, such as the signal being blocked by large TV
sets, metal cubicle walls in open space offices, etc.

Even though the radio supports repeater mode, the two Gigabit Ethernet ports give you the ability
to extend your network with cables, even if PoE power is required: the cAP XL ac supports 802.3af/
at PoE input on the first port and passive PoE output (up to 57V) on the second port.

Quick cAP tip: the customizable mode button in the center will turn off all
lights and sounds, but can be reconfigured to launch any RouterOS script.

cAP XL ac 2
Specifications

Product code RBcAPGi-5acD2nD-XL

CPU Quad core IPQ-4018 710 MHz

Size of RAM 128 MB

RAM type DDR3L

Storage 16 MB, Flash

Number of 1G Ethernet ports 2

Wireless 2.4 GHz 5 GHz

Supported protocol 802.11b/g/n 802.11a/n/ac

Antenna gain 6 dBi 5,5 dBi

Number of chains 2

Operating system RouterOS (License level 4)


Switch chip model IPQ-4018

Dimensions 191 x 42 mm

Operating temperature -40°C to +70°C tested

Powering

PoE-in 802.3af/at

PoE-out Passive PoE up to 57V


Smart PoE Injector
Number of DC inputs 1
PoE-out ports Ether2
Supported input voltage 18-57 V

Power adapter nominal voltage 24 V

Power adapter nominal current 1.2 A

Max power consumption (without attachments) 11 W

Max power consumption 24 W

Certification & Approvals

Certification CE, FCC, IC

cAP XL ac 3
Wireless specifications

Rate (2.4 GHz) Tx (dBm) Receive Sensitivity Rate (5 GHz) Tx (dBm) Receive Sensitivity
1MBit/s 26 -100 6MBit/s 26 -96
11MBit/s 26 -94 54MBit/s 21 -80
6MBit/s 26 -96 MCS0 26 -96
54MBit/s 23 -78 MCS7 20 -75
MCS0 26 -96 MCS9 18 -70
MCS7 22 -73

Included parts

24 V 1.2 A Gigabit Ceiling mount Fastening


power adapter PoE injector set

cAP XL ac 4

You might also like