LED Traditional Wall Pack
LED Traditional Wall Pack
LED Traditional Wall Pack
Product Features
Operating temperature: 40°C to 50°C
Durable die cast aluminumhousing
Built -in photocell
Enclosure provides a water-tight seal making it suitable for outdoor application
Integral LED driver ( 60W isolated driver and 120W non-isolated driver ), eliminates the need for
an external driver or ballast.
Up to 145 lumens per watt
Three selectable wattage
Complies with UL sa fety regulationsand is DLC5.1 listed
High Quality and Efficacy Lumiled 2835 chips
This product is IP65 rated, therefore, it is waterproof, sealed and gasketed wire
Universal operation at 120277Vac 50-60Hz
Environment friendly with no mercury
Easy to install and operate, with instant and no humming
Energy saving, long lifespan
1
SKU NUMBER 153459 S pecifications
1 2
SKU Number 153462 Specifications
3
Correlated Colour Temperature (CCT)
Dimensions
4
SKU Number 153459 Light Distribution Testing Parameters
Luminaire Data
Voltage: 119.9 V
Current: 0.486 A
Power: 58.12 W
Power Factor: 0.996
Photometric Results
5
SKU Number 153462 Light Distribution Testing Parameters
Luminaire Data
Voltage: 120.0 V
Current: 1.03 A
Power: 123.54 W
Power Factor: 0.995
Photometric Results
6
Notes Before Installation
Caution
Caution
7
Installation Instructions
Installation Method – 1
8
9
Installation Method – 2
10
11
Wiring and Features
Troubleshooting
12
Packaging
Net Weight /
Box Size Qty / Carton Gross Weight / Carton
Carton
16 x 12 x 10
Outer Box 1 PC 7.93 lbs. 10.14 lbs
inches
1. Please do not shake it too much during transportation, handle carefully when unloading.
2. Recommended to be stored in a warehouse of -10~ +60 ℃ and keep the warehouse dry.
Application
13
Safety Precautions
To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts,
cuts/abrasions, and other hazards read all warnings and instructions included with and on the fixture box
and all fixture labels.
Before installing, servicing, or performing routine maintenance upon this equipment, follow these general
precautions.
Commercial installation, service and maintenance of luminaires should be performed by a qualified licensed
electrician.
For the installation: If you are unsure about the installation or maintenance of the luminaires, consult a
qualified licensed electrician and check your local electrical code.
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit
installation.
Warranty
5 Years Warranty
14