Technical Data: 400 Series 404A-22G1
Technical Data: 400 Series 404A-22G1
Technical Data: 400 Series 404A-22G1
272.5
295.4
841.2
404A-22G1 ElectropaK, front view
354
497.16
132 TO END F/W
AND F/W HOUSING
109
102 TO 241 SPOT-FACE
206 PILOT HOLE
66 TO 174 SPOT-FACE
120 PILOT HOLE
0
404A-22G1 ElectropaK, right side view
104
404A-22G1 ElectropaK, rear view
263.2
277
226.2 234
404A-22G1 ElectropaK, plan view
404A-22G1 ElectropaK, underneath view
226
340
13
358.5
324
Cooling system Exhaust system
Radiator Maximum back pressure . ... ... ... ... ... ... ... ... ... ... ... ... .10.2 kPa
-face area... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. 0.167 m² Exhaust outlet size .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 42 mm
-rows and materials ... ... ... ... ... ... ... ... ... ... ...2 rows, Aluminium
-matrix density and material ... ... ... .. 14.5 fins per inch, Aluminium
-width of matrix... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 334.2 mm Fuel system
-height of matrix . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 500.0 mm
-pressure cap setting . ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 90 kPa Type of injection .. ... ... ... ... ... ... ... ... ... ... ... ... . Indirect injection
Estimated cooling air flow reserve . ... ... ... ... ... ... ... ... 0.125 kPa Fuel injection pump . ... ... ... ... ... ... ... ... ... ... ... ... . Cassette type
Fuel injector. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...Pintle nozzle
Fan Nozzle opening pressure ... ... ... ... ... ... ... ... ... ... ... ... 14.7 MPa
-diameter ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 320 mm Max. particle size. ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 25 microns
-drive ratio .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. 1.25:1
-number of blades .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. 6 Fuel lift pump
-material . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..Plastic -type ... ... ... ... ... ... ... ... ... ... ... ... mechanical (camshaft driven)
-type ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .Pusher -flow/hour. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. 63 litres/hr
-pressure . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 kPa
Coolant Maximum suction head ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. 0.8 m
Total system capacity Maximum static pressure head ... ... ... ... ... ... ... ... ... ... ... .. 3.0 m
-with radiator .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...7.0 litres Governor type.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .Mechanical
-without radiator . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...3.6 litres
Maximum top tank temperature . ... ... ... ... ... ... ... ... ... ... .. 112°C Fuel specification
Temperature rise across engine ... ... ... ... ... ... ... ... ... ... ... 7.5°C USA Fed Off Highway - EPA2D 89.330-96
Max. permissible external system resistance ... ... ... ... .. TBA kPa Europe Off Highway - CEC RF-06-99
Thermostat operation range... ... ... ... ... ... ... ... ... ... ... . 82 - 95°C Note: For further information on fuel specifications and restrictions,
Recommended coolant: refer to the OMM Fuels section for this engine model.
Recommended coolant: 50% anti freeze / 50% water. For complete
details of recommended coolant specifications, refer to the Fuel consumption
Operation and Maintenance Manual for this engine model. Power rating%
g/kWh (litres/hr)
Duct allowance
110 100 75 50
Maximum additional restriction (duct allowance) to cooling 244 (6.1) 237 (5.3) 238 (4.0) 258 (2.9)
airflow and resultant minimum airflow
Ambient clearance Duct allowance
m³/sec
50% Glycol Pa
53°C 0 0.67
46°C 125 0.49
Electrical system
-alternator... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. 15 amps, 12V
-starter motor . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 2 kW, 12V
15W-40 The general arrangement drawings shown in this data sheet are for
10W-40 guidance only. For installation purposes, latest versions should be
requested from the Applications Dept., Perkins Engines Stafford,
10W-30 ST16 3UB United Kingdom.
5W-40
5W-30
0W-40
0W-30
0W-20
Notes
Distributed by