RD Dcu Digital Card Unit
RD Dcu Digital Card Unit
RD Dcu Digital Card Unit
DCU
DIGITAL CARD UNIT
* Eurocard format - The digital control unit has been designed and
produced to digitally drive two hydraulic axes in
* 24 VDC - 30 W power supply
closed loop movement and position.
* Protection against polarity inversion
- Besides, it can be used for power control in
* Card set-up through RS232 serial port closed loop.
* Control of one or two hydraulic axes - All the parameters: target position speed
transport, acceleration and deceleration ramps
* Outputs for valves with integrated electronics
can be digitally controlled by the RS232 serial
(+/- 10V)
port, positioned on the front panel.
* +/- 10V analog outputs for external amplifiers
- Each parameter can be controlled independently
* Integrated power driver for a proportional valve of all the others.
with two solenoids
- The amplifier has been designed to work with any
* SSI digital feedback for position kind of proportional valve, with integrated or
traditional electronics, with zero or positive
* Analog feedback 0-10V for pressure
overlap.
* Outputs totally protected against short circuits
- The amplifier can also drive the two axes
* Possibility to read and store the set-up data independently. The positioning values, the
transport speed parameters, the acceleration and
* Sensor self-calibration
deceleration ramps can be set with different
* Possibility to set up the unit via PC or Remote values.
Control
- The set-up can be saved as a simple file and it
* Position and speed loop can be used to reproduce the original system
settings. In this way the amplifier and the valve
* Operating temperature 0-50°C
can be easily replaced.
89 400/info ED 1/2
DCU
DIGITAL CARD UNIT
APPLICATIONS
* Synchronized presses
* Blow moulding machines: parison control - clamp movement - mould’s opening and closing
OPERATING LOGIC
SOFTWARE
By means of the software installed on PC, via RS232 it is possible to change the parameters of the card and the
calibration of the electro-hydraulic system.
By means of the Remote Control, via RS232 it is possible to change the parameters of the card and the
calibration of the electro-hydraulic system.
89 400/info ED REPRODUCTION IS FORBIDDEN. THE COMPANY RESERVES THE RIGHT TO APPLY ANY MODIFICATIONS. 2/2