Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 22 views

    Laboratorio 2@

    Uploaded by

    carlos
    This document provides instructions for initializing and reloading a Cisco router and switch to remove any existing configurations. It outlines 3 parts: setting up the network topology, initializing the router by erasing the startup configuration and reloading it, and initializing the switch by deleting VLAN files, erasing the startup configuration, and reloading it. The purpose is to ensure the devices have no configurations before starting hands-on labs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Laboratorio 2@

    Uploaded by

    carlos
    22 views5 pages
    This document provides instructions for initializing and reloading a Cisco router and switch to remove any existing configurations. It outlines 3 parts: setting up the network topology, initializing the router by erasing the startup configuration and reloading it, and initializing the switch by deleting VLAN files, erasing the startup configuration, and reloading it. The purpose is to ensure the devices have no configurations before starting hands-on labs.

    Original Description:

    Empresa2

    Original Title

    Laboratorio_2@

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for initializing and reloading a Cisco router and switch to remove any existing configurations. It outlines 3 parts: setting up the network topology, initializing the router by erasing the startup configuration and reloading it, and initializing the switch by deleting VLAN files, erasing the startup configuration, and reloading it. The purpose is to ensure the devices have no configurations before starting hands-on labs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    22 views5 pages

    Laboratorio 2@

    Uploaded by

    carlos
    This document provides instructions for initializing and reloading a Cisco router and switch to remove any existing configurations. It outlines 3 parts: setting up the network topology, initializing the router by erasing the startup configuration and reloading it, and initializing the switch by deleting VLAN files, erasing the startup configuration, and reloading it. The purpose is to ensure the devices have no configurations before starting hands-on labs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    Laboral02

    Topology

    Objectives
    Part 1: Set Up Devices in the Network as Shown in the Topology
    Part 2: Initialize the Router and Reload
    Part 3: Initialize the Switch and Reload

    Background / Scenario
    Before starting a CCNA hands-on lab that makes use of either a Cisco router or switch, ensure that the
    devices in use have been erased and have no startup configurations present. Otherwise, the results of your
    lab may be unpredictable. This lab provides a detail procedure for initializing and reloading a Cisco router and
    a Cisco switch.
    Note: The routers used with CCNA hands-on labs are Cisco 4221 with Cisco IOS XE Release 16.9.3
    (universalk9 image). The switches used in the labs are Cisco Catalyst 2960 with Cisco IOS Release 15.0(2)
    (lanbasek9 image). Other routers, switches, and Cisco IOS versions can be used. Depending on the model
    and Cisco IOS version, the commands available and the output produced might vary from what is shown in
    the labs. Refer to the Router Interface Summary Table at the end of the lab for the correct interface identifiers.
    Instructor Note: Refer to the Instructor Lab Manual for the procedures to initialize and reload devices.

    Required Resources
    • 1 Router (Cisco 4221 with Cisco IOS XE Release 16.9.3 universal image or comparable)
    • 1 Switch (Cisco 2960 with Cisco IOS Release 15.0(2) lanbasek9 image or comparable)
    • 2 PCs (Windows with terminal emulation program, such as Tera Term)
    • Console cables to configure the Cisco IOS devices via the console ports

     2015 - 2021 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 1 of 5 www.netacad.com
    Laboral02

    Instructions
    Part 1: Set Up Devices in the Network as Shown in the Topology

    Step 1: Cable the network as shown in the topology.


    Attach console cables to the devices shown in the topology diagram.

    Step 2: Power on all the devices in the topology.


    Wait for all devices to finish the software load process before moving to Part 2.

    Part 2: Initialize the Router and Reload

    Step 1: Connect to the router.


    Console into the router and enter privileged EXEC mode using the enable command.
    Open configuration window

    Router> enable
    Router#

    Step 2: Erase the startup configuration file from NVRAM.


    Type the erase startup-config command to remove the startup configuration from nonvolatile random-
    access memory (NVRAM).
    Router# erase startup-config
    Erasing the nvram filesystem will remove all configuration files! Continue?
    [confirm]
    [OK]
    Erase of nvram: complete
    Router#

    Step 3: Reload the router.


    Issue the reload command to remove an old configuration from memory. When prompted to Proceed with
    reload, press Enter to confirm the reload. Pressing any other key will abort the reload.
    Router# reload
    Proceed with reload? [confirm]

    *Nov 29 18:28:09.923: %SYS-5-RELOAD: Reload requested by console. Reload


    Reason: Reload Command.
    Note: You may receive a prompt to save the running configuration prior to reloading the router. Respond
    by typing no and press Enter.
    System configuration has been modified. Save? [yes/no]: no

    Step 4: Bypass the initial configuration dialog.


    After the router reloads, you are prompted to enter the initial configuration dialog. Enter no and press Enter.
    Would you like to enter the initial configuration dialog? [yes/no]: no

    Step 5: Terminate the autoinstall program.


    You will be prompted to terminate the autoinstall program. Respond yes and then press Enter.

     2015 - 2021 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 2 of 5 www.netacad.com
    Laboral02

    Would you like to terminate autoinstall? [yes]: yes


    Router>
    Close configuration window

    Part 3: Initialize the Switch and Reload

    Step 1: Connect to the switch.


    Console into the switch and enter privileged EXEC mode.
    Open configuration window

    Switch> enable
    Switch#

    Step 2: Determine if there have been any virtual local-area networks (VLANs) created.
    Use the show flash command to determine if any VLANs have been created on the switch.
    Switch# show flash

    Directory of flash:/

    2 -rwx 1919 Mar 1 1993 00:06:33 +00:00 private-config.text


    3 -rwx 1632 Mar 1 1993 00:06:33 +00:00 config.text
    4 -rwx 13336 Mar 1 1993 00:06:33 +00:00 multiple-fs
    5 -rwx 11607161 Mar 1 1993 02:37:06 +00:00 c2960-lanbasek9-mz.150-2.SE.bin
    6 -rwx 616 Mar 1 1993 00:07:13 +00:00 vlan.dat

    32514048 bytes total (20886528 bytes free)


    Switch#

    Step 3: Delete the VLAN file.


    a. If the vlan.dat file was found in flash, then delete this file.
    Switch# delete vlan.dat
    Delete filename [vlan.dat]?
    You will be prompted to verify the file name. At this point, you can change the file name or just press
    Enter if you have entered the name correctly.
    b. When you are prompted to delete this file, press Enter to confirm the deletion. (Pressing any other key will
    abort the deletion.)
    Delete flash:/vlan.dat? [confirm]
    Switch#

    Step 4: Erase the startup configuration file.


    Use the erase startup-config command to erase the startup configuration file from NVRAM. When you are
    prompted to remove the configuration file, press Enter to confirm the erase. (Pressing any other key will abort
    the operation.)
    Switch# erase startup-config
    Erasing the nvram filesystem will remove all configuration files! Continue?
    [confirm]
    [OK]
    Erase of nvram: complete

     2015 - 2021 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 3 of 5 www.netacad.com
    Laboral02

    Switch#

    Step 5: Reload the switch.


    Reload the switch to remove any old configuration information from memory. When you are prompted to
    reload the switch, press Enter to proceed with the reload. (Pressing any other key will abort the reload.)
    Switch# reload
    Proceed with reload? [confirm]
    Note: You may receive a prompt to save the running configuration prior to reloading the switch. Type no
    and press Enter.
    System configuration has been modified. Save? [yes/no]: no

    Step 6: Bypass the initial configuration dialog.


    After the switch reloads, you should see a prompt to enter the initial configuration dialog. Type no at the
    prompt and press Enter.
    Would you like to enter the initial configuration dialog? [yes/no]: no
    Switch>
    Close configuration window

    Reflection Questions
    1. Why is it necessary to erase the startup configuration before reloading the router?
    Type your answers here.
    The startup configuration file is loaded into memory and becomes the running-config after the router
    reloads. Erasing this file allows the router to return to its basic configuration after a reload.
    2. You find a couple configurations issues after saving the running configuration to the startup configuration, so
    you make the necessary changes to fix those issues. If you were to reload the device now, what configuration
    would be restored to the device after the reload?
    Type your answers here.
    The configuration at the time of the last save is restored to the device after a reload. Any changes
    made to the running configuration after the last save would be lost.

    Router Interface Summary Table

    Router Model Ethernet Interface #1 Ethernet Interface #2 Serial Interface #1 Serial Interface #2

    Fast Ethernet 0/0 Fast Ethernet 0/1


    1800 (F0/0) (F0/1) Serial 0/0/0 (S0/0/0) Serial 0/0/1 (S0/0/1)
    Gigabit Ethernet 0/0 Gigabit Ethernet 0/1
    1900 (G0/0) (G0/1) Serial 0/0/0 (S0/0/0) Serial 0/0/1 (S0/0/1)
    Fast Ethernet 0/0 Fast Ethernet 0/1
    2801 (F0/0) (F0/1) Serial 0/1/0 (S0/1/0) Serial 0/1/1 (S0/1/1)
    Fast Ethernet 0/0 Fast Ethernet 0/1
    2811 (F0/0) (F0/1) Serial 0/0/0 (S0/0/0) Serial 0/0/1 (S0/0/1)
    Gigabit Ethernet 0/0 Gigabit Ethernet 0/1
    2900 (G0/0) (G0/1) Serial 0/0/0 (S0/0/0) Serial 0/0/1 (S0/0/1)

     2015 - 2021 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 4 of 5 www.netacad.com
    Laboral02

    Router Model Ethernet Interface #1 Ethernet Interface #2 Serial Interface #1 Serial Interface #2

    Gigabit Ethernet 0/0/0 Gigabit Ethernet 0/0/1


    4221 (G0/0/0) (G0/0/1) Serial 0/1/0 (S0/1/0) Serial 0/1/1 (S0/1/1)
    Gigabit Ethernet 0/0/0 Gigabit Ethernet 0/0/1
    4300 (G0/0/0) (G0/0/1) Serial 0/1/0 (S0/1/0) Serial 0/1/1 (S0/1/1)

    Note: To find out how the router is configured, look at the interfaces to identify the type of router and how many
    interfaces the router has. There is no way to effectively list all the combinations of configurations for each router
    class. This table includes identifiers for the possible combinations of Ethernet and Serial interfaces in the device.
    The table does not include any other type of interface, even though a specific router may contain one. An
    example of this might be an ISDN BRI interface. The string in parenthesis is the legal abbreviation that can be
    used in Cisco IOS commands to represent the interface.
    End of Document

     2015 - 2021 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 5 of 5 www.netacad.com

    You might also like