Compact FieldPoint Accessories (323493A-01)
Compact FieldPoint Accessories (323493A-01)
Compact FieldPoint Accessories (323493A-01)
FieldPoint™, National Instruments™, NI™, and ni.com™ are trademarks of National Instruments Corporation.
Product and company names mentioned herein are trademarks or trade names of their respective companies.
For patents covering National Instruments products, refer to the appropriate location: Help»Patents in your software,
the patents.txt file on your CD, or ni.com/patents.
RJ-50 Pin or
DB-9 Pin RS-232 Signal Screw Terminal RS-485 Signal
1 DCD 10 GND
2 RX 9 CTS+ (HSI+)
3 TX 8 RTS+
(HSO+)
4 DTR 7 RXD+
5 CND 6 RXD–
6 DSR 5 CTS– (HSI–)
7 RTS 4 RTS– (HSO–)
8 CTS 3 TXD+
9 RI 2 TXD–
— No Connect 1 No Connect
Mounting Accessories
NI offers several accessories for mounting the Compact FieldPoint
system on a DIN rail, in a standard 19 in. instrumentation rack, or
on a panel. All Compact FieldPoint mounting accessories will
work with either the cFP-BP-4 or the cFP-BP-8.
Refer to the cFP-20xx and cFP-BP-x User Manual for instructions
on using Compact FieldPoint mounting accessories. Follow the
cooling guidelines in the cFP-20xx and cFP-BP-x User Manual
when using any of the mounting options.
The cFP DIN rail clip kit is designed for quick, convenient
mounting on a 35 mm DIN rail. The kit includes the two screws
shown in Figure 8.
L
NA S
TIO ENT
NATRUM
INS
L
NA TS
TIO EN
NATRUM
INS
102 mm
(4 in.)
L
NA TS
TIO EN
NATRUM
INS
AL
IONMENTS
NAT
TRU
INS