Video Production System

VPS-700 "GINGA"

Video Production System

VPS-700 "GINGA"
VPS-700 Big Bang
The VPS-700 "GINGA" (the Japanese word for "Galaxy") from FOR-A features completely
new work flows, and is bursting with special effects that were not available until now. It
paves the way for ground-breaking creativity in LIVE productions and editing suites. Be
prepared to have all your ideas about video switchers shattered by the VPS-700!

■ Multi Layer & Multi DVE

All inputs have independent 2D DVEs (option), making it equivalent to a monstrous
32-channel DVE. Mix/Effect (M/E) transitions are combined by two independent
pre-combiners, and two-channel combined outputs can be assigned to the PGM and PST
buses. This means that all videos that are input to the switcher can be combined and
displayed at one time. This video representation delivers dramatic impact unattainable with
previous video switchers.
VPS-700 Main Features

■ Maximum of 16 Input/Outputs ■ Flash Recorder Function

All inputs in the VPS-700 include a frame synchronizer (FS) VPS-70FR flash
that provides asynchronous input. It also features a freeze recorder card (option)
frame function using FS memory and still store, can display can be used to
video captured by M/E as still video for each input, and can enable recording and
display CG images that were created elsewhere. Basic input playback of uncom-
includes eight SD-SDI channels, and SDI input or analog pressed SD video.
input are also available as an option. As a digital/analog Up to two cards can
mixed switcher, the VPS-700 supports expansion up to 16 be installed (the slot
inputs. Basic output provides a total of eight channels: two is shared with the
PGM channels, PVW, Clean, and four AUX channels. VPS-70DS). A single
Available options include eight SDI outputs (in four-output card enables a
units) or four analog outputs (in two-output units for compos- maximum recording time of 120 seconds and simultaneous
ite). The PVW and Clean output channels can also be used playback of video with key channel for two channels.
as KEY OUT, and the AUX outputs including the additional Various types of playback are also supported, including
outputs can be freely assigned for enabling output of the regular playback, reverse playback, loop control, and trigger
required video from a selected terminal. control. In addition, recorded video is stored in memory so
that it remains saved even when the power is turned off.
■ M/E Bus This eliminates the need to make recordings at each startup.

The M/E bus can handle switching of 16 inputs (optional

configuration), 4 matte generators, 2 still stores, 2 ■ 6 Keyers
pre-combiners, and black for a total of 25 inputs. 6 keyers are available in the
Transitions can be selected from cut, mix, wipe, and DVEs. standard configuration, and 4
More than 100 wipe patterns, including swirl and other keyers can select from cut, mix,
distinctive patterns, are available that enable wipe borders wipe, and DVE transitions. The
and positioning adjustment. 2 DSKs enable cut and mix
transitions. All keyers incorpo-
■ Wide Range of Still Stores rate chroma keys using the
All inputs can be frozen using FS memory. The frozen 4:4:4 process and can perform masking with wipe patterns,
images at M/E bus can also be saved built-in-storage and edge and shadow effects, and key channel effects with
can be assigned using two cross-points independent from assigned DVEs.
other inputs.
■ Compact Main Unit
■ Input DVE Card (Pre-combiner) The main unit incorporates up to 16 inputs and 16 outputs,
FS function, still store, Proc Amp, clip function, DVEs, keyers,
2D DVE functions are added to all 16 inputs. The position,
and a wide array of other functions in a compact EIA 2RU
size and rotation of each input can be adjusted, borders can
size. A special main unit with a built-in redundant power
be added, and the transparency can be set. The input DVE
supply is also available with all these functions incorporated
card has a pre-combiner function where inputs can be
into an EIA 3RU body size.
assigned as an M/E bus or key source. Also, up to 2 cards
can be installed for enabling transitions to another image
from each card's combined output image.

■ Proc Amp/Clip Function

A process amplifier and white clip function are provided for
each input as standard. This enables level and other adjust-
ments within the switcher without the need for peripherals.
VPS-700 main unit
■ Compact and Instinctively Comprehensible Control Panel

The compact and easy-to-use control panel of the VPS-700 has basic PGM/PST rows and fader levels, 3-axis joystick,
parameter display, and optional touch panel controller. Despite these numerous ground-breaking functions, the VPS-700 will
not overwhelm you with complicated operations.

■ 6-channel 3D DVEs ■ Other Features

In addition to the DVEs provided for each input channel, the VPS-700 *4 matte generator available
also provides 6-channel 2.5D DVEs. The addition of a 3D warp module
option enables usage of Ripple, Swirl, Slats, Page Turn and a wide *USB port on operation unit for support of
variety of other warp effects and a total of 12 lighting effects. The result memory devices (up to 2GB)
when combined with the input DVEs will even surpass your imagination.
*Enables saving of 100 patterns of
sequences containing 31 settable key
frames

*96-event memory can be called using 8

pages x 12 direct buttons

*Incorporates 3-serial port for control and

other operations from an editing device

*Free assignment of 8 GPI inputs and 24

tally outputs
Options
VPS-70SDI: VPS-70WARP: VPS-70DPUA:
4-input Digital Expansion Card DVE Warp Engine Module Display Panel Unit
Each card enables an additional 4 SD-SDI inputs. This option adds warp effects to the installed This option enables touch panel control of the
It incorporates a frame synchronizer, still store, standard DVEs and is separate from the input DVEs. various functions of the VPS-700. It presents the
and process amplifier functions. Up to 2 cards can multi-layer and multi-DVE functions in an easy
be installed. VPS-70DPUIF: to understand and easily operation.
Display Interface
VPS-70AI: This is a software package for connecting an
2-Input Analog Expansion Card external display to the VPS-700. It is required when
Each card enables an additional 2 analog connecting the VPS-70DPU Touch Panel Display.
composite inputs or 1 analog composite input and
1 analog component input. It incorporates a frame VPS-70DS:
synchronizer, still store, and process amplifier Input DVE Card (Pre-combiner)
functions. Up to 4 cards can be installed. This option adds DVE functions to each input. It
features a 16-channel DVE and 2-channel
VPS-70SDO: combiner. Up to 2 cards can be installed.
4-output Digital Expansion Card
Each card enables an additional 4 SD-SDI outputs. VPS-700RPS:
It also enables free assignment of outputs. Up to 2 Main frame with a redundant power suppry
cards can be installed. A special main unit with a built-in redundant
power supply
VPS-70AO:
2-Output Analog Expansion Card HVS-AUX16:
16-button AUX control panel
Each card enables an additional 2 analog
composite outputs, or 1 analog composite output 32 inputs are manageable by using the shift
and 1 analog component output, or 1 RGB output. button. Connect up to 10 units with customizable
It also enables free assignment of outputs. Up to 2 assignment for each panel.
cards can be installed. *A PC-3168-1 cable (separate purchase) is
required for the connection.

■ Block Diagram
 Specifications
Notes on Input Expansion
Standard 525/60 (NTSC), 625/50 (PAL) (Selectable at menu)
Processing 4:2:2 digital component, 10-bit
Video Input 8 standard inputs, optionally expandable 16 inputs
Digital component: 270Mbps, 75Ω, BNC
Video Input Refer to right pattern
(option) SD-SDI: 270Mbps, 75Ω, BNC Digital/analog input expansion slots
Analog component: Y: 1.0Vp-p, B-Y/R-Y: 0.7Vp-p, BNC
Expansion with one of the VPS-70SDI or VPS-70AI
Analog composite: 1.0Vp-p, 75Ω, BNC  VPS-70SDI: 4 SD-SDI inputs occupies one slot
Reference Input BB: 0.429Vp-p (NTSC)/0.45Vp-p (PAL), 75Ω or Loopthrough, 1ea., BNC  VPS-70AI: 2 composite inputs or 1 composite + 1 component input
Video Output 8 standard output (PGM x 2, PREV, Clean, AUX x 4), optionally expandable 16 outputs occupies one slot
Digital component: 270Mbps, 75Ω, BNC
Video Output Refer to right pattern Analog input expansion slots
(option) SD-SDI: 270Mbps, 75Ω, BNC Expansion with the VPS-70AI only is possible.
Analog component: Y: 1.0Vp-p, B-Y/R-Y: 0.7Vp-p, BNC The following combinations for the maximum expansion can be made as below.
Analog composite: 1.0Vp-p, 75Ω, BNC SD-SDI x 8 (STD) + Analog composite x 8
SD-SDI x 8 (STD) + Analog composite x 4 + Analog component x 4
RGB: R/G/B: 0.7Vp-p, 75Ω, BNC
SD-SDI x 8 (STD) + SD-SDI x 4 + Analog composite x 2
Reference Output BB: 0.429Vp-p (NTSC)/0.45Vp-p (PAL), 75Ω or Loopthrough, 1ea., BNC + Analog component x 2
Quantization Y: 10-bit, C: 10-bit, Key: 10-bit SD-SDI x 8 (STD) + SD-SDI x 8
*Expansion allows up to 16 inputs. Therefore, if two VPS-70SDI cards are
I/O Delay 1H (When FS, edge/shadow and DVE not applied to output)
added, the VPS-70AI cannot be added.
Max. 4 frames
Interfaces OU: Ethernet 10/100BASE-T, 1ea., RJ-45
RS-422: 3ea., 9-pin D-sub (female) (for Editor)
GPI IN/TALLY: 1ea., 37-pin D-sub (female) (8 inputs / 24 outputs) Notes on Output Expansion
Temperature / Humidity 5ºC - 40ºC / 30% - 90% (no condensation)
Power 100VAC - 240VAC ±10%, 50/60Hz
Consumption Main unit (VPS-700): 100W (max. 160W)
Main unit (VPS-700RPS): 120W (max. 180W)
Operation unit: 50W
Digital/analog output expansion slots
Dimensions / Weight Main unit (VPS-700): 430(W) x 88(H) x 425(D)mm, EIA2RU / Approx. 15kg
Main unit (VPS-700RPS): 430(W) x 132(H) x 425(D)mm, EIA3RU / Approx. 18kg Expansion with one of the VPS-70SDO or VPS-70AO
Operation unit: 430(W) x 155.8(H) x 221(D)mm / Approx. 5kg  VPS-70SDO: 4 SD-SDI outputs occupies one slot
 VPS-70AO: 2 composite outputs, or 1 composite + 1 component, or
Accessories Main unit (VPS-700): AC cord, OU connection cable, Rack mount brackets 1 composite + 1 RGB/SYNC output occupies one slot
Main unit (VPS-700RPS): AC cord, OU connection cable, Rack mount brackets, Redundant power supply (pre-installed)
Operation unit: Operation manual, AC cord (Rack mount brackets are option) The following combinations for the maximum expansion can be made as below.
Option VPS-70SDI: 4-input SD-SDI expansion card / VPS-70AI: 2-input analog expantion card / SD-SDI x 8 (STD) + Analog composite x 4
SD-SDI x 8 (STD) + Analog composite x 2 + Analog component x 2
VPS-70SDO: 4-output SD-SDI expansion card / VPS-70AO: 2-output analog expansion card / SD-SDI x 8 (STD) + Analog composite x 2 + RGB/SYNC x 2
VPS-70WARP: DVE warp engine module / VPS-70DPUIF: Display interface / SD-SDI x 8 (STD) + SD-SDI x 8
VPS-70DPUA: Display panel unit / VPS-70DS: Input DVE card (pre-combiner) /
VPS-70FR: Flash Recorder card / HVS-AUX16: 16-button AUX control panel / PC-3168-1: Connection Cable

External Dimensions
VPS-700 Main Unit: External Dimensions
t2.3
88
76

430 40 345 40
482 482 45

Operation Unit: External Dimensions (83.6)

VPS-700 Main Unit: Rear Panel
8º VIDEO OUT PGM 1 PGM 2 PREV CLEAN AUX 1 AUX 2 AUX 3 AUX 4 1 1
REMOTE RS-422

155.8
1 2 EDITOR

116.4
2 2

430 92.2 VIDEO IN 1 2 3 4 5 6 7 8 3 3

AC100 - 240V ~ 50/60Hz IN

1 2 4 4

GENLOCK IN BB OUT TO OU
7 8 9 -

SEQ
4 5 6

VPS-700RPS Main Unit: External Dimensions

LOOP DIR
1 2 3
JOYSTICK

NEW VPS-700
0 .

KEYER FADER DIRECTION

430
221

KEY STATUS
BUS SELECT DVE
KEY1 KEY2 KEY3 KEY4 DSK1 DSK2 BASIC WARP LIGHT KEY KEY DSK
SHIFT BKGD 1 2 1
MATTE INPUT AUX STILL SEQ EVENT

SETUP
132
57

KEY KEY DSK

3 4 2

BLACK 1 2 3 4 5 6 7 8 9 10 11 12 SHIFT
MIX WIPE DVE BLACK
(FAM) (NAM) TRANS
PROGRAM

1 2 3 4 5 6 7 8 9 10
40 350 40
DSK DSK
BLACK 11 12 SHIFT
40 345 40
CUT AUTO CUT MIX

PRESET TRANSITION

480 425 45

61.4
VPS-700RPS Main Unit: Rear Panel
REMOTE RS-422
1 2 EDITOR

SDI OUT PGM1 PGM2 PREV CLEAN AUX1 AUX2 AUX3 AUX4 1 1

2 2
AC100 - 240V 50/60Hz IN
1

SDI IN 1 2 3 4 5 6 7 8 3 3

2
1 2 4 4

GENLOCK IN BB OUT

FOR-A COMPANY LIMITED Homepage:http://www.for-a.com/

Head Office : 3-8-1 Ebisu, Shibuya-ku, Tokyo 150-0013, Japan +81 (0)3-3446-3936 Fax : +81 (0)3-3446-1470
FOR-A America Corporate Office : 11125 Knott Ave., Suite #A, Cypress, CA 90630, USA +1 714-894-3311 Fax : +1 714-894-5399
FOR-A America East Coast Office : 1065 Avenue of the Americas, Suite #1701A, New York, NY 10018, USA +1 212-861-2758 Fax : +1 212-861-2793
FOR-A America Distribution & Service Center : 2400 N.E. Waldo Road, Gainesville, FL 32609, USA +1 352-371-1505 Fax : +1 352-378-5320
FOR-A Latin America & the Caribbean : 5200 Blue Lagoon Drive, Suite #760, Miami, FL 33126, USA +1 305-931-1700 Fax : +1 305-264-7890
FOR-A Corporation of Canada : 425 Queen St. W. #210, Toronto, Ontario M5V 2A5, CANADA +1 416-977-0343 Fax : +1 416-977-0657
FOR-A UK Limited : UNIT C71, Barwell Business Park, Leatherhead Road, Chessington Surrey, KT9 2NY, UK +44 (0)20-8391-7979 Fax : +44 (0)20-8391-7978
FOR-A Italia S.r.l. : Viale Europa 50 20093, Cologno Monzese (MI), Milan, Italy +39 02-254-3635/6 Fax : +39 02-254-0477
FOR-A Corporation of Korea : 801 Dangsan Bld., 53-1 Dangsan-Dong, Youngdeungpo-Gu, Seoul 150-800, Korea +82 (0)2-2637-0761 Fax : +82 (0)2-2637-0760
FOR-A China Limited : Room C302 Tia Hao International Bld., 116 Zizhu-Yuan Road, Hai Diang District, Beijing, China +86 (0)10-5170-9870 Fax : +86 (0)10-5170-9772

© 2009 FOR-A Company Ltd. FOR-A is a registered trademark of FOR-A Company Ltd. Design and specifications subject to change without notice. Printed in Japan. 0910FJ0E