Website: Vce To PDF Converter: Facebook: Twitter:: Dea-5Tt1.Vceplus - Premium.Exam.61Q
Website: Vce To PDF Converter: Facebook: Twitter:: Dea-5Tt1.Vceplus - Premium.Exam.61Q
Website: Vce To PDF Converter: Facebook: Twitter:: Dea-5Tt1.Vceplus - Premium.Exam.61Q
61q
Number: DEA-5TT1
Passing Score: 800
Time Limit: 120 min
File Version: 1.0
Website: https://vceplus.com
VCE to PDF Converter: https://vceplus.com/vce-to-pdf/
Facebook: https://www.facebook.com/VCE.For.All.VN/
Twitter : https://twitter.com/VCE_Plus
DEA-5TT1
Version 1.0
www.vceplus.com - Free Questions & Answers - Online Courses - Convert VCE to PDF - VCEplus.com
Exam A
QUESTION 1
A. Addresses used by NAT router when sending frames to devices on the local network
B. Public IP addresses used by the local network to communicate with the Internet
C. Private IP addresses used by the local network
D. Pubic addresses used by other networks outside of the local network
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
A. Ring
B. Cascade
C. Serial
D. Daisy-chain
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 3 Which option is used to configure Network Address Translation (NAT) to provide one-to-one mapping between local and global
addresses?
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
A. 20 - 25
B. 443 - 1000
C. 1023 - 2024
D. 40000 - 65535
Correct Answer: D
Section: (none)
www.vceplus.com - Free Questions & Answers - Online Courses - Convert VCE to PDF - VCEplus.com
Explanation
Explanation/Reference:
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 6 At which layer of the OSI model is the Rapid Spanning Tree protocol used to prevent
switching loops?
A. Physical
B. Network
C. Data LinkD. Transport
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 7 Which field of the 802.3 frame is used by network interface cards to synchronize
their receivers?
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Correct Answer: C
www.vceplus.com - Free Questions & Answers - Online Courses - Convert VCE to PDF - VCEplus.com
Section: (none)
Explanation
Explanation/Reference:
QUESTION 9 Which Layer 1 device can be used to enlarge the area covered by a single
LAN segment?
A. Router
B. Repeater
C. Switch
D. NIC
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
A. Time synchronization algorithms are more complex and account for clock drift.
B. Client makes sudden changes in time to keep synchronized.
C. Client synchronizes among a set of distributed time servers.
D. Implemented on a Dell EMC Network OS 9 and OS 10.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 12 Which IPv4 address is in the same network as the IP address 182.15.24.40/23 and assignable to
a host device?
A. 182.15.23.224
B. 182.15.25.0
C. 182.15.25.255
D. 182.15.26.10
www.vceplus.com - Free Questions & Answers - Online Courses - Convert VCE to PDF - VCEplus.com
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
A. 2.5GBASE-T
B. 5GBASE-T
C. 10BASE-T
D. 10GBASE-T
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 14 A network administrator created three VLANs on an Ethernet switch. How many broadcast domains are created
by the switch?
A. 1
B. 2
C. 3
D. 4
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 15
DRAG DROP
What is the correct sequence of steps that occur in the communications between the client and server to obtain an IP address from a DHCP server?
www.vceplus.com - Free Questions & Answers - Online Courses - Convert VCE to PDF - VCEplus.com
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
QUESTION 16 What are the Protocol Data Units (PDUs) called at the
Transport layer?
A. Data Payload
B. Frame
C. Segment
D. Packets
Correct Answer: C
www.vceplus.com - Free Questions & Answers - Online Courses - Convert VCE to PDF - VCEplus.com
Section: (none)
Explanation
Explanation/Reference:
QUESTION 17
Refer to the exhibit.
Switch A and Switch B are connected to each other. Both switches use interfaces Gi1/0/1 and Gi1/0/2. Switch A has a Spanning Tree priority of 8192 and Switch B has the default priority. Which interface becomes the root port?
A. Switch A Gi1/0/1 B.
Switch A Gi1/0/2 C.
Switch B Gi1/0/1
D. Switch B Gi1/0/2
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 18
You recently joined a company as a junior-level network administrator. You have been tasked with designing the IPv4 scheme for five networks that will be used for training classrooms. These networks need to support no more than 28 devices
each. Due to the existing network design, the senior-level network administrator has asked you to work on network 192.168.40.0/24.
If all networks must be made to logically start with the lowest numbered network and end with the largest numbered network, what is the network ID for the third network?
A. 192.168.40.32/27 B.
192.168.40.64/27
C. 192.168.40.96/27
D. 192.168.40.128/27
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 19
www.vceplus.com - Free Questions & Answers - Online Courses - Convert VCE to PDF - VCEplus.com
On which Dell EMC Networking switches can Multi-Chassis Link Aggregation (MLAG) be configured?
A. C9000 Series
B. N-Series
C. S-SeriesD. Z-Series
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 20 What is the aggregated lanes’ maximum speed rating for a QSFP28
transceiver?
A. 4 Gbps
B. 40 Gbps
C. 112 Gbps
D. 128 Gbps
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
A. 5 seconds
B. 10 secondsC. 15 seconds
D. 30 seconds
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
A. Access port
B. General port
C. Hybrid port
D. Trunk port
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 23
Which component translates data, signaling, and protocols to facilitate the data flow between the end device and the network?
www.vceplus.com - Free Questions & Answers - Online Courses - Convert VCE to PDF - VCEplus.com
A. Switch
B. Transceiver
C. NIC
D. Port
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 24 When configuring a switch, which CLI mode only supports limited
show commands?
A. EXEC
B. Maintenance
C. Configuration
D. EXEC Privilege
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.dell.com/support/manuals/us/en/04/poweredge-fx2/dell%20fn%20ioa%20config_9.8.0.0_pub-v1/cli-modes?guid=guid-aeb7d44d-2413-4da8-b8b9-2f8a26bad435&lang=en-us
QUESTION 25
A network administrator is troubleshooting an OSPF routing issue. There are two paths to a destination network from one switch. In addition, one path is comprised of four 1 Gb links. The other path is comprised of two 1 Gb and two 100 Mb
links. The administrator ran several trace routes and notices that the packets are swapping back and forth between the two paths.
Which corrective action must be taken on the switch infrastructure to correct this issue?
A. Manually specify the OSPF Router ID on each switch within the path.
B. Break the paths into multiple OSPF areas.
C. Change the reference speed used by OSPF in cost calculations on all switches within the path.
D. Switch all routing protocols to RIPv2.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 26
How many total addresses for network, broadcast, and host are provided with the subnet mask 255.255.255.240?
A. 8
B. 16
C. 24
D. 48
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
www.vceplus.com - Free Questions & Answers - Online Courses - Convert VCE to PDF - VCEplus.com
QUESTION 27 Which IPv6 scope is used for private addressing on a
local network?
A. Global
B. Area wide
C. Unique local
D. APIPA
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 28
A Dell EMC Networking N-Series switch is configured on a port channel with LACP using the interfaces Te1/0/1 and Te1/0/2. How is the egress traffic distributed among the interfaces?
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 29 On Switch A, a static route has been redistributed into OSPF. Which type of OSPF router will this process
make Switch A?
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Explanation/Reference:
www.vceplus.com - Free Questions & Answers - Online Courses - Convert VCE to PDF - VCEplus.com
Reference: https://www.dell.com/en-us/work/shop/povw/networking-os6
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 32 If a packet is sent to an IPv6 address and many devices receive the packet, what is this
type of traffic?
A. Multicast
B. Broadcast
C. Anycast
D. Unicast
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 33 A network administrator wants to use a subnet that will only have two host addresses. Which subnet mask meets this
requirement?
A. 255.255.255.248
B. 255.255.255.252
C. 255.255.255.254
D. 255.255.255.256
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 34 Which flags are used in the TCP header to initiate and end TCP connections
or sessions?
Correct Answer: C
www.vceplus.com - Free Questions & Answers - Online Courses - Convert VCE to PDF - VCEplus.com
Section: (none)
Explanation
Explanation/Reference:
QUESTION 35
A VLAN has been configured to have an IPv6 address and a stateless address autoconfiguration for clients. Which IPv6 address prefix will the default gateway have on a client?
A. fd01::/64 B.
fe08::/64
C. fe80::/64
D. ff02::/8
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Reference: https://en.wikipedia.org/wiki/Link_Layer_Discovery_Protocol#:~:text=Each%20LLDP%20frame%20starts%20with,and%20length%20fields%20are%200
A. 802.1AB
B. 802.1AX
C. 802.1D
D. 802.1W
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: http://www.ieee802.org/3/frame_study/0409/blatherwick_1_0409.pdf
A. 200 Mbps
B. 2.56 Mbps
C. 1.52 Tbps
D. 2.56 Tbps
www.vceplus.com - Free Questions & Answers - Online Courses - Convert VCE to PDF - VCEplus.com
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Reference: http://i.dell.com/sites/doccontent/shared-content/data-sheets/en/documents/dell_networking_c9000_specsheet.pdf
QUESTION 39 What is the default route preference value for a Border Gateway Protocol (BGP)
internal route?
A. 40
B. 110C. 200
D. 253
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Reference: https://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_networking/networking-n2128px-on_Administrator-Guide_en-us.pdf page 1528.
QUESTION 40
Which Dell EMC Networking M-Series 10 GbE switch model supports a VLT?
A. MXL
B. M6220
C. M6348
D. M8024-K
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://i.dell.com/sites/doccontent/shared-content/data-sheets/en/Documents/PowerEdge_M_Series_Blades_IO_Guide.pdf
QUESTION 41
A network administrator has a Dell EMC switch that has been configured with several VLANs. Each VLAN switch virtual interface (SVI) has an IP address assigned to it with each of them on different subnets. In addition, routing has been
enabled on the switch.
Which action occurs when the switch receives a packet on one of its SVIs but the destination IP address of the packet does not match the IP address of that SVI?
A. Switch checks its routing table and forwards the packet accordingly.
B. Switch duplicates the packet and sends it to all interfaces.
C. Switch replies back to the source with an ICMP Reject packet.
D. Switch drops the packet.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
A. Echo request
www.vceplus.com - Free Questions & Answers - Online Courses - Convert VCE to PDF - VCEplus.com
B. Time exceeded
C. Destination unreachable
D. Echo reply
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 44 What is the Organizationally Unique Identifier (OUI) in the MAC address
00:C4:4F:23:AF:4A?
A. 00:C4:4F
B. 00:C4:4F:23
C. 23:AF:4A
D. 4F:23:AF:4A
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 45 Which Ethernet frame forwarding method works best when the outbound ports run at the same speed as the
inbound port?
A. Store-and-forward
B. Fragment-free
C. Unicast
D. Cut-through
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 46 Router A is directly connected to Router B over an Ethernet link. The local interface address for the Router A Fo0/48 interface is 144.254.32.2/24. Which routing table entry is visible
on Router A?
www.vceplus.com - Free Questions & Answers - Online Courses - Convert VCE to PDF - VCEplus.com
A. 144.254.0.0/16
B. 144.254.0.0/24
C. 144.254.32.0/24
D. 144.254.32.2/24
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 47 In IPv4, what is the proper conversion from binary to decimal for the
number 11010010?
A. 202
B. 210
C. 226
D. 258
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
A. BGPng
B. BGPv2
C. BGPv3
D. BGPv4
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://en.wikipedia.org/wiki/IPv6_address#:~:text=An%20IPv6%20address%20is%20represented,0000%3A8a2e%3A0370%3A7334\
www.vceplus.com - Free Questions & Answers - Online Courses - Convert VCE to PDF - VCEplus.com
QUESTION 50 An Ethernet switch receives a frame from a directly connected host. The source MAC address of the frame is not present in the MAC address table for the switch. However, the destination address is present in the MAC
address table.
A. Flushes the destination MAC address and updates the MAC address table in the switch.
B. Adds the source MAC address and port to the MAC address table and forwards the frame.
C. Discards the frame on all ports and sends an error message back to the host.
D. Floods the frame to all ports except for the port the frame originated from to locate the source MAC address.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 51
DRAG DROP
The IEEE separates the Data Link and Physical ISO layers into four sub-layers. Based on the exhibit, what is the correct order of these sub-layers; from lowest to highest?
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.oreilly.com/library/view/ethernet-the-definitive/1565926609/ch01.html
QUESTION 52
What accurately describes OSPF?
www.vceplus.com - Free Questions & Answers - Online Courses - Convert VCE to PDF - VCEplus.com
A. Interior gateway link-state protocol
B. Exterior gateway distance-vector protocol
C. Interior gateway distance-vector protocol
D. Interior gateway path-vector protocol
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 54 In which Spanning Tree protocol state does a port record MAC addresses but does not
forward the data?
A. Forwarding
B. Blocking
C. Learning
D. Listening
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
A. Default route
B. Dynamic
C. Static
D. Directly connected
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
www.vceplus.com - Free Questions & Answers - Online Courses - Convert VCE to PDF - VCEplus.com
A. 100.100.90.87
B. 126.16.20.48
C. 191.56.44.200
D. 192.15.48.130
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
A. VLT allows for more physical devices to appear as one virtual device than stacking does.
B. Stacked switches share a common control plane while VLT peers maintain their own control plane.
C. Stacked switches and VLT peers allow “single pane of glass” management by maintaining a single control plane.
D. Both VLT and stacking allow devices to use different versions of firmware provided that the switch family/series is the same.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Reference: https://downloads.dell.com/manuals/common/dellemcnetworking_stacking_vs_vlt.pdf Introduction section
A. 2 and 3 B.
2 and 7
C. 3 and 4
D. 4 and 7
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 59
A network administrator has a stack of four Dell EMC Networking S4800 Series switches. Each stack unit is configured with a different priority. Which switch will be elected as the management device?
A. Switch with priority 0
B. Switch with priority 1
C. Switch with priority 14
D. Switch with priority 21
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 60
DRAG DROP
www.vceplus.com - Free Questions & Answers - Online Courses - Convert VCE to PDF - VCEplus.com
What is the correct sequence of steps when a web browser accesses a web server?
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
QUESTION 61 Which port type does a Dell EMC Networking N-Series switch have for its console
connection?
A. DB9
B. RJ-45
C. USB A
D. USB B
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_networking/esuprt_net_fxd_prt_swtchs/networking-n3100-series_user%27s-guide10_en-us.pdf page 197
www.vceplus.com - Free Questions & Answers - Online Courses - Convert VCE to PDF - VCEplus.com