Hempel's Shopprimer E 15275: Product Characteristics Product Data
Hempel's Shopprimer E 15275: Product Characteristics Product Data
Hempel's Shopprimer E 15275: Product Characteristics Product Data
Hempel's Shopprimer E
15275
Specific gravity
1.2 kg/L [10 lb/US gal]
Product safety
Reference dry film thickness
Flash point 4°C [39°F] 20 micron [0.8 mils]
Legislation Value
Surface preparation
EU 642 g/L [5.36 lb/US gal]
* Other shades are available, please contact your local Hempel representative. Issued by Hempel A/S - June 2021
1/3
Product Data Sheet
Hempel's Shopprimer E
15275
Thinner
Hempel's Thinner 08570 Drying and overcoating
Cleaner Product compatibility
Hempel's Tool Cleaner 99610 - Previous coat: None.
- Subsequent coat: According to Hempel’s Specification.
Pot life
Spray data are indicative and subject to adjustment. Pressure is for a material 20°C
Quality name
temperature of 20°C [68°F]. [68°F]
Atmospheric medium
Film thickness
Min 6h
Hempadur 15571
Specification range Low High Recommended Max Ext
15 micron 25 micron 20 micron Overcoating times are indicative for products of the same generic chemistry.
Dry film thickness Consult Hempel’s specification for more information.
[0.6 mils] [1.0 mils] [0.8 mils]
Hempel's Shopprimer E
15275
Storage
Shelf life
25°C 35°C
Ambient temperature
[77°F] [95°F]
Additional documents
Additional information is available at the Hempel website hempel.com
or at your local Hempel website:
- Explanatory Notes explaining the fields in this Product Data Sheet.
- Surface Preparation Guidelines.
- Application Guidelines for different application methods.
- General Application Guidelines
This Product Data Sheet (“PDS”) relates to the supplied product (“Product”) and is subject to updating from time-to-time. Accordingly, the buyer/applicator should have regard to the PDS supplied together
with the relevant batch of the Product (and not an earlier version). In addition to the PDS, the buyer/applicator may receive some or all of the following specifications, statements and/or guidelines as listed
below or as are available from the Hempel website under ‘Products’ at www.hempel.com (the “Additional documents”):
No. Document description Location/comments
1. Technical Statement One-off specific advice provided on request for specific projects
2. Specification Only issued for specific projects
3. PDS This document
4. Explanatory Notes to the PDS Available at www.hempel.com and contain relevant information about the Product testing parameters
5. Application Instruction Where available, at www.hempel.com
6. Generic technical guidelines (e.g. on application and surface preparation) Where available, at www.hempel.com
In the event of a conflict of information between the PDS and the Additional documents, the order of priority of information shall be in the order as set out above. In such event you should also contact your
representative at Hempel for clarification. Furthermore, the buyer/applicator must have full regard to the relevant Safety Data Sheet provided with each Product and which can also be downloaded from
www.hempel.com.
Hempel shall not be liable for defects where the application of the Product has not been made fully in accordance with the recommendations and requirements set out in the relevant PDS and the Additional
Documents. The information and terms of this disclaimer apply to this PDS, the Additional documents and any other documents supplied by Hempel in respect of the Product. In addition, the Product is
supplied and all technical assistance is given subject to Hempel’s General Conditions of Sale, Delivery and Service, unless otherwise expressly agreed in writing.