Touch Panel Designer - Manual v1.0.6.0

www.osram.
com/lms
TOUCH PANEL DESIGNER MANUAL
The Touch Panel Designer is an intuitive and simple

graphical user interface for creation of specific pages on
DALI PROFESSIONAL Touchpanel to switch on/off

or dim the light in a DALI system.
The DALI PROFESSIONAL Touchpanel works in
combination with the DALI controller which manages all the

commands from the user interface towards the DALI
devices.
1
Wall mounting
To install the product please refer to the manual in

the packaging, or download it from the our web site
www.osram.com/lms
Graphical interface
The starting page of the software is simple and

intuitive. As shown in the picture below, the area is
divided into the menu bar and four windows:
“Project Explorer”, “Designer”, ”Components” ,
“Properties” and “Pages”.
1. Menu:
The menu contains commands to edit the pages of

the Touch Panel.
New Project: Creates a new project
Open Project: Opens an existing

project
2
Close Project: Closes the current
project
Save Project: Saves the current project
Export Project: Export of current

project
Import Project: Import of project
New Application: Creates a new

application for the device
Open Application: Opens an existing

application for the device
Close Application: Closes an application

of the device
Deploy Application: Compiles the

current application and then deploys it
on an USB key
New Page: Creates a new page of the

Application Device
Delete Page: Deletes a page of the

Application Device
Themes: Example and Preselection

of Screens
3
2. Components:
The window “Components” provides of following

elements:
Graphic Controls: Elements to import texts and

images
Dali Controls: Elements to control DALI devices on

the system
Application Actions: Elements to browse among the

pages of the application device
4
3. Designer
The window “Designer” is the area where you are

able to drag&drop the above mentioned elements,
backgrounds, images etc.
4. Project Explorer
The “Project Explorer” shows the tree structure of

the project and all its devices, pages and every
single element put on the page.
5. Pages
The window “Pages” shows the preview of

already created pages.
6. Properties
The “Properties” lists the properties of a single

object of the project.
First select the object then choose “Properties”.
5
Components
In the menu on the right side, there are the

components to drag&drop into the pages of the
device.
The elements are sorted in three groups as
follows:
Navigation actions:
The following buttons are used to navigate
through the pages of the application device:
Previous page, next page, minimize pages, shut
down, settings
DALI Control
This menu contains DALI commands to control the
devices in the system. The main unit associates
the push button to a command among the list of
Standard DALI commands.
Graphical Control
The menu contains two graphical elements which
help customizing the device: text and images.
Such objects can be drag&droped into the page.
IMPORTANT: Do not overlap the elements on the
page as they will cause compiling errors. Then it is
not possible to generate any configuration file.
Overlapped elements are displayed in red.
Properties
Any element on the previous menus can be

customized editing its properties.
Property: It is possible to change the dimension by

choosing one of the offered values in the drop-
down menu. It is even possible to
rename/comment the function or edit the
coordinates. Text on buttons can be labelled with
different fonts, colours, etc.
Aspect’s control: All buttons laid on the working

area can be replaced by other graphic themes
without modifying the function of the buttons.
6
DALI property: Valid for DALI controls only. It
displays the channel address.
Background pages: The background can be

customized choosing one of the example
templates or uploading an individual image
(640x480).
New Project:
1. Choose the first icon on the left “New

Project”.
2. Type in the name of the project and

optionally give a brief description.
3. Type in the name of the application device

and optionally give a brief description.
4. Type in the name of the page and optionally

give a brief description.
It is then possible to choose a theme and select
navigation commands to insert into the page.
5. Once the page is created, it is possible to add

the buttons (DALI pushbutton commands) from
the window “Components”.
7
6. Every DALI button can be changed to another
button skin chosen from “Properties”.
7. The background can be changed selecting

one from the “Properties” menu. “Load Image”
permits to upload an user-defined image.
(640x480 pixel).
8. It is possible to label buttons. After selecting

the button, write the specific text in the
“Properties menu”. Select the font, colour and
dimensions.
Adding text on the background is allowed by the
“Text” element in the menu.
Design example:
8
Configuration upload
Once the project is completed, it is possible to

transfer it to the Touch Panel.
The command “Deploy” in the upper menu creates
the file which will be exported to the USB memory
key.
The USB memory key has to be inserted into the

Touch Panel to deploy this application. Then press
the arrow button in the middle of the screen to
upload the configuration to the Touch Panel
Touch Panel’s Setting Menu
SetUp
The settings menu gives access to the four sub-

menus where the displayed language can be chosen
and audio and brightness can be adjusted.
Furthermore there is the option for password

protection.
9
Back light
The brightness can be set either automatically by

the Touch Panel sensor located behind the LED light
or manually.
Language
The language menu gives the possibility to choose

among five languages: English, Italian, French
Spanish and German.
10
Audio
The Touch Panel creates a sound when touched.

This sound can be chosen from the drop down menu
while the volume can be regulated accordingly.
Password
The Touch Panel can be protected with a password

against unauthorized operation. The password
consists of 4 digits which are typed in with the
displayed console. To change at first old password
has to be typed in, then new password two times. To
remove password protection it has to be set to '0000'
(default value).
11
Touch Panel Operating System (OS)
Update Procedure
1. Go to the info page (?) of the Touch Panel

Designer Software.
2. Go to the “Touch Panel Software” tab.
3. Click the button “Transfer the Touch Panel

Operating System”.
4. Select the SD memory on the list on the left.
5. Press OK - data transfer starts.
6. Plug the SD memory in the Touch Panel and restart

the device by pressing the “Reset” button on right
side of the USB plug.
Supported file systems:
7. Wait until the operating system update is finished.
12
Touch Panel Software.
Update Procedure
1. Go to the info page (?) on Touch Panel Designer

Software.
2. Go to the Touch Panel Software tab.
3. Click the button “Transfer the Touch Panel

Software”.
4. Insert a USB memory key to the PC.
Supported file systems:
5. Select it in the list on the left and press OK.
6. Remove the USB memory key and plug it in the

Touch Panel.
7. Restart the Touch Panel by pressing the “Reset”

button on right side of the USB plug.
13
8. After a while a window, as in the image below, will
appear.
9. Press the arrow button in the center to upload the

Touch Panel software.
10. Remove the USB memory key.
11. Press the X-button on right upper corner. The

new version will start now.
XII 2012
Touch Panel Designer Manual_EN.pdf
OSRAM GmbH
Kunden Service Center
Customer-Service-Center (CSC)
Steinerne Furt 62
86167 Augsburg
Germany
Tel.: +49 (0) 89 6213 - 0
Fax.: +49 (0) 80 6213 - 2020
www.OSRAM.com
www.OSRAM.de
14

Touch Panel Designer - Manual v1.0.6.0

Uploaded by

Copyright:

Available Formats

Touch Panel Designer - Manual v1.0.6.0

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Touch Panel Designer - Manual v1.0.6.0

Uploaded by

Copyright:

Available Formats

www.osram.

TOUCH PANEL DESIGNER MANUAL

The Touch Panel Designer is an intuitive and simple

DALI PROFESSIONAL Touchpanel to switch on/off

The DALI PROFESSIONAL Touchpanel works in

combination with the DALI controller which manages all the

To install the product please refer to the manual in

The starting page of the software is simple and

The menu contains commands to edit the pages of

New Project: Creates a new project

Open Project: Opens an existing

Save Project: Saves the current project

Export Project: Export of current

Import Project: Import of project

New Application: Creates a new

Open Application: Opens an existing

Close Application: Closes an application

Deploy Application: Compiles the

New Page: Creates a new page of the

Delete Page: Deletes a page of the

Themes: Example and Preselection

The window “Components” provides of following

Graphic Controls: Elements to import texts and

Dali Controls: Elements to control DALI devices on

Application Actions: Elements to browse among the

The window “Designer” is the area where you are

The “Project Explorer” shows the tree structure of

The window “Pages” shows the preview of

The “Properties” lists the properties of a single

In the menu on the right side, there are the

Any element on the previous menus can be

Property: It is possible to change the dimension by

Aspect’s control: All buttons laid on the working

Background pages: The background can be

1. Choose the first icon on the left “New

2. Type in the name of the project and

3. Type in the name of the application device

4. Type in the name of the page and optionally

5. Once the page is created, it is possible to add

7. The background can be changed selecting

8. It is possible to label buttons. After selecting

Once the project is completed, it is possible to

The USB memory key has to be inserted into the

Touch Panel’s Setting Menu

The settings menu gives access to the four sub-

Furthermore there is the option for password

The brightness can be set either automatically by

The language menu gives the possibility to choose

The Touch Panel creates a sound when touched.

The Touch Panel can be protected with a password

1. Go to the info page (?) of the Touch Panel

2. Go to the “Touch Panel Software” tab.

3. Click the button “Transfer the Touch Panel

4. Select the SD memory on the list on the left.

5. Press OK - data transfer starts.

6. Plug the SD memory in the Touch Panel and restart

7. Wait until the operating system update is finished.

1. Go to the info page (?) on Touch Panel Designer

2. Go to the Touch Panel Software tab.