ENSP V100R001C00 Software Installation Guide
ENSP V100R001C00 Software Installation Guide
ENSP V100R001C00 Software Installation Guide
V100R001C01
Issue 01
Date 2012-8-10
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website: http://www.huawei.com
Email: support@huawei.com
Contents
Single Computer
Item Minimum Recommended Expanded
Configuration Configuration Configuration
CPU Dual-core 2.0 GHz or Dual-core 2.0 GHz or Dual-core 2.0 GHz or
faster faster faster
Multiple Computers
Item Minimum Recommended Expanded
-
Configuration Configuration Configuration
Maximum 4 8 8 + 4*n
number of
networking
devices
Memory (GB) 1 2
NOTE
Each virtual device on eNSP needs to use some resources. Each computer supports a different number of
virtual devices based on the configuration. In the preceding tables, n is an integer that indicates the increased
memory size, and the maximum number of networking devices in the expanded configuration increases
according to the increased memory size and cannot exceed 50.
2 Software Installation
Procedure
Step 1 Double click the installation program and open the installation wizard.
Step 2 Select English and click OK, the welcome window is displayed.
Step 5 Set the name of the eNSP program shortcut displayed in the Start menu and click Next.
Step 6 Choose whether to create the program shortcut on the desktop and click Next.
Step 8 Confirm installation information and click Install to start the installation.
Step 9 After the installation, if you do not want to open eNSP immediately, do not select Launch
eNSP and click Finish to end the installation.
----End