MS-50G Firmware Update Guide (Windows)
MS-50G Firmware Update Guide (Windows)
MS-50G Firmware Update Guide (Windows)
● Zoom Corporation does not bear liability for any damages or third-party claims arising from the
use of the software, whether directly or indirectly. Unauthorized redistribution, sale, leasing, renting,
alteration, or reverse engineering of the software is prohibited. Features and specifications of the
software and the contents of the documentation may be changed in future without notice.
Contents
1. Introduction .................................................................................................. 2
2. Installing the standard Windows driver on the computer .............................. 2
Precautions ..................................................................................................... 2
3. Updating the firmware .................................................................................. 3
1. Introduction
Thank you very much for downloading the firmware update application for
the MS-50G.
This document explains how to update the firmware for the MS-50G.
Precautions
2) Before starting this application, shut down all other applications that are running.
In addition, if any MIDI or audio devices are connected by USB cable to the
computer you are using, disconnect them all.
2
3. Updating the firmware
3.1 While pressing both the up and down cursor keys, use a USB cable to
connect the USB connector to the computer.
NOTE
The firmware update requires the standard driver. Follow the instructions of the
wizard to complete its installation. (See “Installing the standard Windows driver on
the computer” on page 2.)
3
3.3 With a MS-50G, click the “MIDI IN” and “MIDI OUT” fields to open lists of MIDI
devices and select “ZOOM MS Series” for both.
If nothing is shown in the fields, click [Rescan Device] button.
3.4 Click the [Execute] button to start the firmware update. The progress of the firmware
update appears as a bar like this.
Do not disconnect the USB cable while the firmware is being updated.
In the unlikely event that a firmware update should fail, follow the procedures from
step 3.1 to update the firmware again.
4
3.5 When the firmware update completes, it will appear as follows.
Click the [Exit] button to close the firmware update application. Then, turn the
MS-50G power off.