User Manual: 6262 Series
User Manual: 6262 Series
User Manual: 6262 Series
www.philips.com/TVsupport
User Manual
43PUS6262
49PUS6262
50PUS6262
55PUS6262
65PUS6262
Contents
2 Software 4 14 Ambilight 43
2.1 Update Software 4 14.1 Ambilight Style 43
2.2 Software Version 4 14.2 Ambilight Brightness, Saturation 43
14.3 Ambilight+hue 43
3 Quick Guide 5 14.4 Advanced Ambilight Settings 44
3.1 Remote Control 5
3.2 IR sensor 6 15 Netflix 46
3.3 Joysticker - Local Control 6
16 Environmental 47
4 Setting Up 8 16.1 European Energy Label 47
4.1 Read Safety 8 16.2 Product Fiche 47
4.2 TV Placement 8 16.3 End of Use 47
4.3 Turn on TV 8
17 Specifications 49
5 Connections 10 17.1 Power 49
5.1 Connectivity guide 10 17.2 Reception 49
5.2 Antenna 10 17.3 Display Resolution 49
5.3 Satellite 10 17.4 Supported Input Resolution - Video 49
5.4 Video Device 10 17.5 Supported Input Resolution - Computer 49
5.5 Audio Device 11 17.6 Sound 50
5.6 Mobile Device 12 17.7 Multimedia 50
5.7 Other Device 13 17.8 Connectivity 50
2
1 1.3
You might be asked to provide the TV product model On the support site you can find your country's
number and serial number. Find these numbers on telephone number to contact us as well as answers to
the packaging label or on the type label on the back frequently asked questions (FAQs). In some countries,
or bottom of the TV. you can chat with one of our collaborators and ask
your question directly or send a question by email.
Register your TV You can download new TV software or the manual to
Register your TV and enjoy a range of benefits read on your computer.
including full support (including downloads), For more TV troubleshooting and frequently asked
privileged access to information about new products, questions (FAQs)...
exclusive offers and discounts, the chance to win
Go
prizes and even participate in special surveys about
to http://philips-tvconsumercare.kxondemand.com/
new releases.
portal/en/ModelSelect
Go to www.philips.com/welcome
Warning
Do not attemp to repair the TV yourself. This may
cause severe injury, irrepairable damage to your TV or
void your warranty.
3
2 back on again. Please wait.
Software Do not . . .
• use the remote control
• remove the USB memory device from the TV
2.1
• press twice
Update Software • press the power switch on the TV
The TV switches itself off (for 10 seconds) and then
back on again. Please wait.
Search for Updates
The TV software has been updated. You can use the
Update from Internet TV again.
To prevent an accidental update of the TV software,
(Home) > Settings > Update software > Search delete the autorun.upg file from the USB memory
for updates > Internet device.
Look for a software update yourself.
• If the TV is connected to the Internet, you may
receive a message to update the TV software. You Local Updates
need a high-speed (broadband) Internet
(Home) > Settings > Update software > Local
connection. If you receive this message, we
updates.
recommend you to carry out the update.
• During the software update, there is no picture and For dealers and expert users.
the TV will switch off and on again. This might happen
several times. The update can take a few minutes.
• Wait until the TV picture comes back up. Do not
press the power switch on the TV or on the Look for OAD updates (Over-the-air
remote control during the software update. Download)
(Home) > Settings > Update software > Look
for OAD updates.
Update from USB
Scan to search for an Over-the-air software update.
(Home) > Settings > Update
software > Search for updates > USB
• You need a computer with an high-speed Internet 2.2
connection and a USB memory device to upload the
software on the TV.
Software Version
• Use a USB memory device with 512MB free space. (Home) > Settings > Update
Make sure that write protection is switched off. software > Current software Info
1 - Start the update on TV
Select Update software > Search for updates > To view the current TV software version.
USB, then press OK.
2 - Identify the TV
Insert the USB memory into one of the USB
connections of the TV.
Select Start and press OK. An identification file is
written on the USB memory device.
3 - Download the TV software
- Insert the USB memory into your computer.
- On the USB memory device, locate the
file update.html and double click it.
- Click on Send ID.
- If new software is available, download the .zip file.
- After the download, unzip the file and copy the
file autorun.upg onto the USB memory device.
- Do not place this file in a folder.
4 - Update the TV software
Insert the USB memory into the TV again. The update
starts automatically.
The TV switches itself off for 10 seconds and then
4
3
Quick Guide
3.1
Remote Control
Batteries and Cleaning
Replace batteries
If the TV does not react on a key press on the remote 1 - Standby / On
control, the batteries might be empty. To switch the TV on or back to Standby.
To replace the batteries, open the battery 2 - Playback and Record
compartment on the back of the remote control. • Play , to playback.
1 - Slide the battery door in the direction shown by • Pause , to pause playback
the arrow. • Stop , to stop playback
2 - Replace the old batteries with 2 • Rewind , to rewind
type AAA-R03-1.5V batteries. Make sure the + and • Fast forward , to go fast forward
the - ends of the batteries line up correctly. • Record , to start recording
3 - Ambilight
To select one of the Ambilight style or switch off
Ambilight.
4 - TV GUIDE
To open or close the TV Guide.
5 - Search
To open the Smart TV searches page.
6 - Settings
3 - Reposition the battery door and slide it back until To open the Quick settings menu.
it clicks.
• Remove the batteries if you are not using the remote 7 - SOURCES
control for a long time. To open the Sources menu.
• Safely dispose of your old batteries according to the 8 - LIST
end of use directions. To open or close the channel list.
Cleaning
Your remote control is treated with a scratch-resistant
coating. Middle
Key Overview
Top
1 - Home
To open the Home menu.
5
2 - SMART TV 4 - SUBTITLE
To open the Smart TV start page. To switch subtitles on, off or to show automatically.
3 - Colour keys 5 - Channel
Direct selection of options. Blue key , opens Help. To switch to the next or previous channel in the
channel list. To open the next or previous page in
4 - INFO
Text/Teletext. To start the next or previous chapter on
To open or close programme info.
a disc.
5 - BACK
6 - Mute
To close a menu without changing a setting.
To mute the sound or to restore it.
6 - - EXIT
7 - TEXT
To switch back to watch TV. To stop an interactive TV
To open or close Text/Teletext.
application.
7 - OPTIONS
To open or close the Options menu. 3.2
8 - OK key IR sensor
To confirm a selection or setting. To open the channel
list while watching TV. The TV can receive commands from a remote control
9 - Arrow / navigation keys that uses IR (infrared) to send commands. If you use
To navigate up, down, left or right. such a remote control, always make sure you point
the remote control at the infrared sensor on the front
10 - MULTIVIEW of the TV.
To open an extra small screen.
Bottom
Warning
Do not put any objects in front of IR sensor of the TV,
it may block the IR signal.
3.3
6
3 - Press up or down to adjust the volume or tune to
the next or previous channel. Press up or down to go
through the list of sources, including the tuner
selection.
The menu will disappear automatically.
7
4
Setting Up
4.1
Read Safety
Read the safety instructions first before you use the
TV.
To read the instructions, in Help > User manual, • 43PUx6262
press the colour key Keywords and look VESA MIS-F 200x200, M6 (Minimum 10 mm,
up Safety and Care. Maximum 14 mm)
• 49PUx6262
VESA MIS-F 200x200, M6 (Minimum 10 mm,
4.2 Maximum 14 mm)
• 50PUx6262
TV Placement VESA MIS-F 200x200, M6 (Minimum 10 mm,
Maximum 14 mm)
Tips on Placement • 55PUx6262
VESA MIS-F 300x200, M6 (Minimum 10 mm,
• Position the TV where light does not shine directly Maximum 14 mm)
on the screen. • 65PUx6262
• Position the TV up to 15 cm away from the wall. VESA MIS-F 400x200, M6 (Minimum 10 mm,
• The ideal distance to watch Ultra HD TV is 2 to 5 Maximum 16 mm)
times of its screen height. When seated, your eyes Preparation
should be level with the centre of the screen.
First remove the 4 plastic screw caps out of the
threaded bushes on the back of the TV.
Make sure that the metal screws, to mount the TV to
the VESA-compliant bracket, go about 10mm deep
inside the threaded bushes of the TV.
Caution
Wall mounting the TV requires special skills and
should only be performed by qualified personnel. The
TV wall mounting should meet safety standards
according to the TVs weight. Also read the safety
precautions before positioning the TV.
TP Vision Europe B.V. bears no responsibility for
improper mounting or any mounting that results in
TV Stand accident or injury.
8
Although this TV has a very low standby power
consumption, unplug the power cable to save energy
if you do not use the TV for a long period of time.
On or Standby
Before you switch on the TV, make sure you plugged
in the mains power in the POWER connector on the
back of the TV.
Switch On
• Press the small joystick key on the back of the TV.
Switch to standby
To switch the TV to standby, press on the remote
control. You can also press the small joystick key on
the back of the TV.
In standby mode, the TV is still connected to the
mains power but consumes very little energy.
To switch off the TV completely, disconnect the
power plug.
When disconnecting the power plug, always pull the
power plug, never the cord. Ensure that you have full
access to the power plug, power cord and outlet
socket at all times.
9
5 5.3
Connections Satellite
Attach the satellite F-type connector to the satellite
5.1 connection SAT at the back of the TV.
Connectivity guide
Always connect a device to the TV with the highest
quality connection available. Also, use good quality
cables to ensure a good transfer of picture and
sound.
When you connect a device, the TV recognizes its
type and gives each device a correct type name. You
can change the type name if you wish. If a correct
type name for a device is set, the TV automatically
switches to the ideal TV settings when you switch to
this device in the Sources menu.
If you need help to connect several devices to the TV,
you can visit the Philips TV connectivity guide. The
guide offers information on how to connect and
which cables to use. 5.4
Copy protection
HDMI ports support HDCP (High-bandwidth Digital
Content Protection). HDCP is a copy protection signal
that prevents copying content from a DVD disc or Blu-
ray Disc. Also referred to as DRM (Digital Rights
Management).
10
5.5
Component
Audio Device
Y Pb Pr - Component Video is a high quality
connection.
HDMI ARC
The YPbPr connection can be used for High Definition
(HD) TV signals. Next to the Y, Pb and Pr signals add Only HDMI 1 on the TV have HDMI ARC (Audio
the Audio Left and Right signals for sound. Return Channel).
Match the YPbPr (green, blue, red) connector colours If the device, typically a Home Theatre System (HTS),
with the cable plugs when you connect. also has the HDMI ARC connection, connect it
Use an Audio L/R cinch cable if your device also has to HDMI 1 connection on this TV. With the HDMI
sound. ARC connection, you do not need to connect the
extra audio cable that sends the sound of the TV
picture to the HTS. The HDMI ARC connection
combines both signals.
Composite
Digital Audio Out - Optical
CVBS - Composite Video is a standard quality
connection. Next to the CVBS signal adds the Audio Audio Out - Optical is a high quality sound
Left and Right signals for sound. connection.
• Y shares the same jack with CVBS. This optical connection can carry 5.1 audio channels.
• Component and Composite share audio jacks. If your device, typically a Home Theatre System
(HTS), has no HDMI ARC connection, you can use this
connection with the Audio In - Optical connection on
the HTS. The Audio Out - Optical connection sends
the sound from the TV to the HTS.
11
Headphones Using Miracast
Stop Sharing
12
5.7
MHL
Other Device
This TV is MHL™ compliant.
If your mobile device is also MHL compliant, you can CAM with Smart Card - CI+
connect your mobile device with a MHL cable to the
TV. With the MHL cable connected you can share About CI+
what's on your mobile device on the TV screen. Your
mobile device charges its battery at the same time. This TV is ready for the CI+ Conditional Access.
The MHL connection is ideal for watching movies or With CI+ you can watch premium HD programmes,
playing games from your mobile device on TV for a like movies and sports, offered by digital TV operators
longer time. in your region. These programmes are scrambled by
Charging the TV operator and descrambled with a prepaid CI+
module.
With the MHL cable connected, your device will Digital TV operators provide a CI+ module
charge while the TV is switched on (not in standby). (Conditional Access Module - CAM) and an
MHL Cable accompanying smart card, when you subscribe to
their premium programmes. These programmes have
You need a passive MHL cable (HDMI to Micro USB) a high level of copy protection.
to connect your mobile device to the TV. You might
need an extra adapter to connect to your mobile Contact a digital TV operator for more information on
device. To connect the MHL cable to the TV use terms & conditions.
the HDMI 3 MHL connection.
Smart Card
13
CAM. Hard Drive with a minimum of 4GB disk space.
To Record
To pause and record a broadcast, you need a
minimum of 250GB disk space. If you want to record
a broadcast with TV guide data from the Internet, you
need to have the Internet connection installed on
your TV before you install the USB Hard Drive.
1 - Connect the USB Hard Drive to one of
the USB connections on the TV. Do not connect
another USB device to the other USB ports when
formatting.
2 - Switch on the USB Hard Drive and the TV.
3 - When the TV is tuned to a digital TV channel,
press (Pause). Trying to pause will start the
formatting.
USB Flash Drive
Follow the instructions on screen.
You can view photos or play your music and videos
When the USB Hard Drive is formatted, leave it
from a connected USB flash drive. Insert a USB flash
connected permanently.
drive in one of the USB connections on the TV while
the TV is switched on.
The TV detects the flash drive and opens a list
showing its content.
If the contents list does not appear automatically,
press SOURCES and select USB.
Warning
The USB Hard Drive is formatted exclusively for this
TV, you cannot use the stored recordings on another
TV or PC. Do not copy or change recording files on
the USB Hard Drive with any PC application. This will
For more information on watching or playing content corrupt your recordings. When you format another
from a USB flash drive, in Help, press the colour USB Hard Drive, the content on the former will be lost.
key Keywords and look up Photos, Videos and A USB Hard Drive installed on your TV will need
Music. reformatting for use with a computer.
To read the instructions, in Help, press the colour
key Keywords and look up USB Hard Drive.
USB Hard Drive
Installation Formatting
If you connect a USB Hard Drive, you can pause or Before you can pause or record a broadcast, you
record a TV broadcast. The TV broadcast must be a must connect and format a USB Hard Drive.
digital broadcast (DVB broadcast or similar). Formatting removes all files from the USB Hard
Before you can pause or record a broadcast, you Drive. If you want to record broadcasts with TV Guide
must connect and format a USB Hard Drive. data from the Internet, you must setup the Internet
Formatting removes all files from the USB Hard Drive. connection first before you install the USB Hard Drive.
To Pause Warning
To pause a broadcast, you need a USB compatible The USB Hard Drive is formatted exclusively for this
14
TV, you cannot use the stored recordings on another
TV or PC. Do not copy or change recording files on
the USB Hard Drive with any PC application. This will
corrupt your recordings. When you format another
USB Hard Drive, the content on the former will be lost.
A USB Hard Drive installed on your TV will need
reformatting for use with a computer.
To format a USB Hard Drive…
1 - Connect the USB Hard Drive to one of
the USB connections on the TV. Do not connect
another USB device to the other USB ports when
formatting.
2 - Switch on the USB Hard Drive and the TV.
3 - When the TV is tuned to a digital TV channel,
press (Pause). Trying to pause will start the
formatting. Follow the instructions on screen.
4 - The TV will ask if you want to use the USB Hard
Drive to store apps, agree to the question if you do.
5 - When the USB Hard Drive is formatted, leave it
connected permanently.
15
6
Switch Source
6.1
Source List
• To open the sources menu, press SOURCES .
• To switch to a connected device, select the device
with the arrows (up) or (down) and press OK.
• To close the source menu without switching to a
device, press SOURCES again.
6.2
Rename Device
• Only CVBS, YPbPr, HDMI sources can be renamed or
replace device icon.
1 - Press SOURCES , and select CVBS, YPbPr or
HDMI.
2 - Press Edit and press OK.
3 - Select one of the device icons and press OK,
the preset name appears in the typing field.
4 - In the typing field, press OK, then enter new
name using on-screen keyboard.
- Press (red) key to enter with lower-case
- Press (green) key to enter with upper-case
- Press (yellow) key to enter number and
symbol
- Press (blue) key to delete a character
5 - Select Done when complete the editing.
6.3
Re-scan Connections
You can rescan all TV connections to update the
sources menu with recently connected devices.
To rescan the connections…
1 - Press SOURCES to open the Sources menu.
2 - Press (up) to select the icon at the top
right of the sources menu.
3 - Press OK to start scanning the connections.
16
7
17
Network frequency
Digital: Reception Test
With the Network frequency mode set to Manual,
you can enter the network frequency value received (Home) > Settings > Antenna/cable
from your cable provider here. To enter the value, installlation > Digital: reception test
use the number keys.
The digital frequency is shown for this channel. If the
Network ID reception is poor, you can reposition your antenna.
Enter the network ID supplied by your cable To check the signal quality of this frequency again,
provider. select Search and press OK.
Symbol rate mode To enter a specific digital frequency yourself, use the
If your cable provider did not give you a remote control digit keys. Alternatively, select the
specific symbol rate value to install the TV channels, frequency, position the arrows on a number
leave the Symbol rate mode setting on Automatic. with and and change the number
If you received a specific symbol rate value, with and . To check the frequency,
select Manual. select Search and press OK.
Symbol rate
With the Symbol rate mode set to Manual, you can
Analogue: Manual Installation
enter the symbol rate value by using the number
keys. (Home) > Settings > Antenna/cable
Free / Scrambled installlation > Analogue: manual installation
If you have a subscription and a CAM - Conditional Analogue TV channels can be manually installed,
Access Module for pay TV services, select Free + channel by channel.
scrambled. If you did not subscribe to pay TV
channels or services, you can select Free • System
channels only . To set up the TV system, select System.
Select your country or the part of the world where
you are now and press OK.
• Store
Channel Update Message You can store the channel on the current channel
number or as a new channel number.
(Home) > Settings > Antenna/cable Select Store and press OK. The new channel
installlation > Channel update message number is shown briefly.
When new channels are found or if channels are You can redo these steps until you have found all
updated or removed, a message is shown at TV start available analogue TV channels.
up. To avoid this message to appear after every
channel update, you can switch it off.
18
transponder or LNB valeus which you can enter here.
Satellite
• LNB Power - By default, LNB Power is set to On.
Search for Satellite and Satellite Settings • 22 kHz Tone - By default, the Tone is set to Auto.
• Low LO Frequency / High LO Frequency - The local
Search for Satellite Channel oscillator frequencies are set to standard values.
Adjust the values only in case of exceptional
(Home) > Settings > Satellite equipment that needs different values.
installlation > Search for satellite
• Select the group of channels you want to install. • You can add an additional satellite to your current
• Satellite operators can offer channel packages that satellite installation. The installed satellites and their
bundle free channels (free-to-air) and offer a sorting channels remain untouched. Some satellite operators
that suits a country. Some satellites offer subscription do not allow adding a satellite.
packages - a collection of channels you pay for. • The additional satellite should be seen as an extra, it
is not your main satellite subscription or not the main
satellite of which you use its channel package.
Typically, you would add a 4th satellite when you
Satellite Settings
have 3 satellites already installed. If you have 4
(Home) > Settings > Satellite satellites installed, you might consider removing one
installlation > Search for satellite > Reinstall first to be able to add a new satellite.
channels • If you currently have only 1 or 2 satellites installed,
the current installation settings might not allow
1 - Select From a sorted package or All channels adding an extra satellite. If you need to change the
unsorted. installation settings, you must redo the complete
2 - Select Settings and press OK. satellite installation. You cannot use Add satellite if
3 - Press Reset to reset, or a change of settings is needed.
press Done when complete the settings.
Connection type
Select the number of satellites you want to install. (Home) > Settings > Satellite
The TV sets the appropriate connection type installlation > Search for satellite > Remove
automatically. satellite
• Up to 4 Satellites - You can install up to 4 satellites You can remove one or more satellites from your
(4 LNBs) on this TV. Select the exact number of current satellite installation. You remove the satellite
satellites you wish to install at the start of the and its channels. Some satellite operators do not
installation. This will speed up the installation. allow removing a satellite.
• Unicable - You can use a Unicable system to
connect the antenna dish to the TV. You can select
Unicable for 1 or for 2 satellites at the start of the
installation.
Automatically Search for Channels
19
Once a day, at 6 AM, the TV updates the channels channels of the package only or select All channel
and stores new channels. New channels are stored in unsorted to install the package and all other
the All channels list but also in the New channels list. available channels too. We recommend a Quick
Empty channels are removed. installation for subscription packages. If you have
If new channels are found or if channels are updated additional satellites that are not part of your
or removed, a message is shown at TV start up. The subscription package, we recommend a full
TV must be in standby to automatically update installation. All installed channels are put in the
channels. channels list.
* Only available when Satellite channel list is set to
From a sorted package
Satellite CAMs
Channel Update Message
If you use a CAM – a Conditional Access Module with
(Home) > Settings > Satellite a smart card – to watch satellite channels, we
installlation > Channel update message recommend to do the satellite installation with the
CAM inserted in the TV.
When new channels are found or if channels are
updated or removed, a message is shown at TV start Most CAMs are used to descramble channels.
up. To avoid this message to appear after every
CAMs (CI+ 1.3 with Operator Profile) can install all the
channel update, you can switch it off.
satellite channels by themselves on your TV. The
CAM will invite you to install its satellite(s) and
channels. These CAMs not only install and
Automatic Update Option descramble the channels but also handle regular
channel updates.
(Home) > Settings > Satellite
installlation > Automatic update option
Unselect a satellite if you do not want to update
automatically.
Channel List copy
* Only available when Satellite channel list is set to Introduction
From a sorted package
Channel list copy is intended for dealers and expert
users.
Manual Installation With Channel list copy, you can copy the channels
installed on one TV onto another Philips TV of the
(Home) > Settings > Satellite same range. With Channel list copy, you avoid the
installlation > Manual installtion time-consuming channel search by uploading a
Manually install satellite. predefined channel list on a TV. Use a USB flash drive
of minimum 1 GB.
• LNB - Select the LNB for which you want to add
new channels. Conditions
• Polarisation - Select the polarisation you need. • Both TVs are from the same year range.
• Symbol rate mode - Select Manual to enter symbol • Both TVs have the same hardware type. Check the
rate. hardware type on the TV type plate on the back of
• Frequency - Enter the frequency for the the TV. Typically noted as Q . . . LA
transponer. • Both TVs have compatible software versions.
• Search - Search for transponder.
20
2 - Press OPTIONS again to close.
Upload a Channel List
21
one TV channel. The TV shows a message if any such
Mono / Stereo
TV channels are available.
You can switch the sound of an analogue channel to
Mono or Stereo.
7.3
To switch to Mono or Stereo…
Tune to an analoge channel.
Channel List
1 - Press OPTIONS, select Mono/Stereo and
press (right).
Open Channel List
2 - Select Mono or Stereo and press OK. To open the current channel list…
3 - Press (left) repeatedly if necessary, to close
the menu. 1 - Press , to switch to TV.
2 - Press LIST to open the current channel list.
3 - Press OPTIONS > Select channel list, and
select one channel list you want to watch.
Status
4 - Press LIST again to close the channel list.
Select Status to view technical information on the
channel or a connected device you are watching.
Channel List Options
HbbTV on This Channel Open Option Menu
If you want to avoid access to HbbTV pages on a To open the channel list option menu...
specific channel, you can block the HbbTV pages for
• Press , to switch to TV.
this channel only.
• Press LIST to open the current channel list.
1 - Tune to the channel of which you want to block • Press OPTIONS , and select one of options.
the HbbTV pages. • Press LIST again to close the channel list.
2 - Press OPTIONS and select HbbTV on this
channel and press (right).
3 - Select Off and press OK.
Rename Channel
4 - Press (left) to go back one step or
press BACK to close the menu. 1 - Press , to switch to TV.
To block HbbTV on TV completely… 2 - Press LIST to open the current channel list.
3 - Select one channel you want to rename.
(Home) > Settings > All settings > General 4 - Press OPTIONS > Rename channel, and
settings > Advanced > HbbTV > Off press OK.
5 - In the typing field, press OK to open on-screen
keyboard, or press BACK to hide the on-screen
Universal Access keyboard.
6 - Use navigation keys to select a character, then
Only available when Universal access set to On. press OK.
(Home) > Settings > All settings > Universal - Press (red) key to enter with lower-case
access > Universal access > On. - Press (green) key to enter with upper-case
- Press (yellow) key to enter number and
To read more information, in Help, press the colour symbol
key Keywords and look up Universal Access. - Press (blue) key to delete a character
7 - Select Done when complete the editing.
8 - Press LIST again to close the channel list.
Share
22
from a favourites channel list, once completed, press
Remove Favourite List
Done.
LIST > OPTIONS > Remove favourite list
To remove existing favourite list, select Yes.
Select Channel Range
7.5
Search Channels
Favourite Channels
LIST > OPTIONS > Search channel
You can search for a channel to find it in a long list of About Favourite Channels
channels.
You can create a favourite channel list that only holds
1 - Press , to switch to TV. the channels you want to watch. With the Favourite
2 - Press LIST to open the current channel list. channel list selected, you will only see your favourite
3 - Press OPTIONS > Search channel, and channels when you switch through channels.
press OK.
4 - In the typing field, press OK to open on-screen
keyboard, or press BACK to hide the on-screen
keyboard. Create a Favourites List
5 - Use navigation keys to select a character, then
1 - While watching a TV channel, press LIST to
press OK.
open the channel list.
- Press (red) key to enter with lower-case
2 - Select the channel, and press Mark as
- Press (green) key to enter with upper-case
favourites to mark as favourite.
- Press (yellow) key to enter number and
3 - The selected channel is marked with a .
symbol
4 - To finish, press BACK . The channels are
- Press (blue) key to delete a character
added to the Favourites list.
6 - Select Done when complete the editing.
7 - Press LIST again to close the channel list.
23
4 - Press the Navigation buttons to move the
highlighted channel to another location and Text Options
press OK.
In Text/Teletext, press OPTIONS to select the
5 - Once completed, press OK.
following…
* Satellite channel only can be searched
• Freeze page
on xxPUS6162, xxPUS6262, xxPUS6272 TV models.
To stop the automatic rotation of subpages.
• Dual screen / Full screen
7.6 To show the TV channel and Text alongside each
other.
Text / Teletext • T.O.P. overview
To open T.O.P. Text.
• Enlarge
Subtitles from Text To enlarge the Text page for comfortable reading.
If you tune to an analogue channel, you need to • Reveal
make the subtitles available for each channel To unhide hidden information on a page.
manually. • Cycle subpages
To cycle subpages when these are available.
1 - Switch to a channel and press TEXT to open • Language
Text. To switch the group of characters that Text uses to
2 - Enter the page number for subtitles, usually 888. display correctly.
3 - Press TEXT again, to close Text. • Text 2.5
If you select On in the Subtitle menu when watching To activate the Text 2.5 for more colours and better
this analogue channel, subtitles will be shown if graphics.
available.
To know if a channel is analogue or digital, switch to
the channel and press INFO . Text Setup
Text language
24
8
Change Day
TV Guide If the TV guide information comes from the
broadcaster, you can press + to view the
8.1 schedule of one of the next days. Press - to go
back to the previous day.
What You Need
Alternatively, you can press OPTIONS and
With the TV guide you can view a list of the current select Change day.
and scheduled TV programmes of your channels.
Depending on where the TV guide information (data)
is coming from, analogue and digital channels or only
digital channels are shown. Not all channels offer TV
Set a Reminder
guide information. You can set a reminder for a programme. A message
The TV can collect TV guide information for the will alert you at the start of the programme. You can
channels that are installed on the TV (e.g the tune to this channel immediately.
channels you watch with Watch TV). The TV cannot In the TV Guide a programme with a reminder is
collect the TV guide information for channels viewed marked with a (clock).
from a digital receiver.
To set a reminder…
1 - Press TV GUIDE and select an upcoming
8.2 programme.
Using the TV Guide 2 - Press Set reminder and press OK.
To clear a reminder…
Open the TV Guide 1 - Press TV GUIDE and select a programme
with the reminder, which is marked with a (clock).
To open the TV guide, press TV GUIDE. 2 - Press Clear reminder, and select Yes, then
Press TV GUIDE again to close. press OK.
The first time you open the TV Guide, the TV scans all
TV channels for programme information. This may
take several minutes. TV guide data is stored on TV. Search by Genre
If the information is available, you can look up
scheduled programmes by genre like movies, sports,
Tune to a Programme etc.
25
Set a Recording
You can set a recording in the TV Guide.
In the TV Guide, a programme set to be recorded is
marked with .
To see the recording list, press Recordings , a
programme set to be recorded is marked with
a (red dot) on the front of the programme name.
To record a programme…
1 - Press TV GUIDE and select a future or
ongoing programme.
2 - Press the colour key Record .
To cancel a recording…
1 - Press TV GUIDE and select the programme
set for recording.
2 - Press the colour key Clear recording .
26
9 recordings.
27
3 - At the top of the screen,
select Scheduled and press OK. Pause a Programme
4 - Press the colour key Schedule and
To pause and resume a broadcast…
press OK.
5 - Select the tuner from where you want to record • To pause a broadcast, press (Pause). A progress
and press OK. bar at the bottom of the screen appears briefly.
6 - Select the channel to record from and press OK. • To call up the progress bar, press (Pause) again.
7 - Select the day of the recording and press OK. • To resume watching, press (Play).
8 - Set the start and end time of the recording. Select
With the progress bar on screen, press (Rewind)
a button and use the (up) or (down) keys to
or press (Forward) to select from where you want
set the hours and minutes.
to start viewing the paused broadcast. Press these
9 - Select Schedule and press OK to schedule the
keys repeatedly to change speed.
manual recording.
To switch back to the actual TV broadcast,
The recording will appear in the list of scheduled
press (Stop).
recordings and reminders.
28
10
Photo Options
Videos, Photos and With a photo on screen, press OPTIONS to…
Music List/Thumbnails
View photos with list view or thumbnails view.
Shuffle off, Shuffle on
10.1
View the pictures in sequential order, or at random.
From a USB Connection Repeat, Play once
View the pictures repeatedly or once only.
You can view your photos or play your music and
videos from a connected USB flash drive or USB Hard Slideshow speed
Drive. Set the speed of the slideshow.
With the TV switched on, plug in a USB flash drive or a Slideshow transitions
USB Hard Drive to one of the USB connections. Set the transition from one picture to the next.
29
Video Options
During the video playback, press OPTIONS to…
Subtitles
Display the subtitles if available, select On, Off,
or On during mute.
Charater set
Select one of system for charater.
Audio language
Play the audio language if available.
Status
Display file information, like sound mode.
Repeat, Play once
Play videos repeatedly or once.
10.4
Music
Play Music
Open music folder
1 - Press SOURCES, select USB and
press OK.
2 - Select USB Flash Drive and press (right)
to select the USB device you need.
3 - Select Music and select one of music, you
can press OK to play the selected music.
• Select a music and press INFO to show file
information.
• Playback a music and press INFO to show
below:
Progress bar, Playback control bar, (Jump to the
previous music in a folder), (Jump to the next
music in a
folder), (Playback), (Rewind), (Fast
forward), (Pause the playback), (Play all/Play
one)
Music Options
Options for playing music...
Repeat, Play once
Play songs repeatedly or once.
30
11 Demo Me
Menus 11.3
11.2
All settings menu:
Utilities Menu Press (home) key on the remote control,
select Settings > All settings, and press OK.
Smart TV
Open Smart TV page.
TV guide
11.4
For more information, in Help, press the colour
key Keywords and look up TV Guide. All Settings
Recordings
Picture Settings
For more information, in Help, press the colour
key Keywords and look up Recordings. Picture Style
Channel
View channel list. Select a style
Update software For easy picture adjustment, you can select a preset
picture style.
For more information, in Help, press the colour
key Keywords and look up Update Software. (Home) > Settings > Picture > Picture style
31
The available Picture styles are ... (Home) > Settings > Picture > Brightness
• Personal - The picture preferences you set during
the first start up Press the arrows (up) or (down) to set the
• Vivid - Ideal for daylight viewing level of brightness of the picture signal.
• Natural - Natural picture settings
Note: Setting of brightness much away from
• Standard - Most energy conscious setting
reference value (50) may result lower contrast.
• Movie - Ideal for watching movies
• Game - Ideal for gaming*
* Picture style - Game is not available for some video Advanced Picture Settings
sources.
Computer
Colour, Contrast, Sharpness, Brightness Select Maximum, Medium, or Minimum to set the
level of the colour intensity and the details in bright
Adjust the picture colour colours.
Adjust the picture contrast Select Normal, Warm, or Cool to set the colour
temperature for your preference.
(Home) > Settings > Picture > Contrast
Press the arrows (up) or (down) to adjust the
contrast value of the picture. Customise colour temperature
You can decrease contrast value to reduce power (Home) > Settings > Picture >
consumption. Advanced > Colour > Colour temperature >
Custom
Select Custom in Colour temperature menu
Adjust the picture sharpness to customise a colour temperature yourself. Press
(Home) > Settings > Picture > Sharpness the arrows (up) or (down) to adjust the value.
32
Press the arrows (up) or (down) to set a non-
Contrast Settings
linear setting for picture luminance and contrast.
Contrast Modes
Set HDR Plus to Off, Minimum, Medium, Maximum (Home) > Settings > All
to set the level at which the TV automatically shows settings > Picture > Advanced > Picture clean
superior contrast and brightness effect for HDR > Noise reduction
content. Select Maximum, Medium, Minimum to set the
Note: Available when HDR (High-Dynamic Range) level for removing the noise in video content.
signal is detected. Noise is mostly visible as small moving dots in on-
screen picture.
• The TV can play HDR programmes* from HDMI 2 or
HDMI 3 connections, broadcasting, from an Internet
source (e.g. Netflix) or from a connected USB memory
MPEG Artefact Reduction
device.
(Home) > Settings > Picture >
* Only HDR10 and Hybrid Log Gamma HDR are
Advanced > Picture clean > MPEG Artefact
supported
Reduction
Select Maximum, Medium, Minimum to have
Dynamic Contrast different degress of smoothing the artefects in digital
video content.
(Home) > Settings > Picture > MPEG artefacts are mostly visible as small blocks or
Advanced > Contrast > Dynamic contrast jagged edges in on-screen images.
Select Maximum, Medium, or Minimum to set the
level at which the TV automatically enhances the
details in the dark, middle and light areas of the Motion Settings
picture.
(Home) > Settings > Picture >
Advanced > Motion
(Home) > Settings > Picture > Not available for below cases:
Advanced > Contrast > Gamma •
33
(Home) > Settings > Picture >
Quick Picture Settings
Advanced > Computer > On
• (Home) > Settings > Picture > Picture style > (Home) > Settings > Picture > Quick picture settings
Game.
• During the first installation, you did some picture
• Network/Internet streaming Ultra HD 50Hz/60Hz
settings in a few easy steps. You can redo these steps
videos.
with Quick picture settings menu.
• Select the picture setting you prefer and go to the
Natural Motion next setting.
(Home) > Settings > Picture > • To do these steps, make sure the TV can tune to a
Advanced > Motion > Natural Motion TV channel or can show a programme from a
connected device.
Natural Motion makes any movement smooth and
fluent.
• Select Maximum, Medium, Minimum to have Sound Settings
different degress for reducing the motion judder,
visible in movies on TV. Sound Style
• Select Minimum or Off when noise appears in
playing moving picture on-screen. Select a style
Note: Only available when Motion styles set For easy sound adjustment, you can select a preset
to Personal. sound style.
(Home) > Settings > Sound > Sound style
Picture Format The available sound styles are ...
(Home) > Settings > Picture > Picture format • Personal - The sound preferences you set during
the first start up.
If the picture is not filling the whole screen, if black • Original - Most neutral sound setting
bars are showing on the top or bottom or at both • Movie - Ideal for watching movies
sides, you can adjust the picture to fill the screen • Music - Ideal for listening to music
completely. • Game - Ideal for gaming
To select one of the basic settings to fill the screen… • News - Ideal for speech
34
select HDMI sound system. The TV will switch off
Headphone Volume
the TV speakers when the device is playing the
(Home) > Settings > Sound > Headphone sound.
volume
Press the arrows (up) or (down) to adjust the
volume of a connected headphone separately. Clear Sound
35
Digital out offset (Only available when Digital out
delay set to On)
General Settings
(Home) > Settings > Sound > Connection Related Settings
Advanced > Digital out offset
USB Hard Drive
• If you cannot set a delay on the Home Theatre
System, you can set the TV to sync the sound. (Home) > Settings > General settings > USB
• You can set an offset that compensates for the time Hard Drive
necessary for the Home Theatre System to process
the sound of the TV picture. You need to set up and format a USB Hard Drive
• You can set the value in steps of 5ms. Maximum before you record a channel.
setting is 60ms.
Switch on EasyLink
36
(Home) > Settings > General
Location - Home or Shop
settings > EasyLink > EasyLink > On
(Home) > Settings > General
settings > Location
Operate HDMI CEC-compatible devices with TV
• Select the location of your TV
remote control • Select Shop, the picture style is switched back
(Home) > Settings > General to Vivid, and can adjust shop settings.
settings > EasyLink > EasyLink remote • Shop mode is for in-store promotion.
control > On
Note:
Shop Setup
- EasyLink might not work with devices from other
brands. (Home) > Settings > General settings > Shop
setup.
- The HDMI CEC functionality has different names on
different brands. Some examples are: Anynet, Aquos If the TV is set to Shop, you can view feature logos or
Link, Bravia Theatre Sync, Kuro Link, Simplink and set the availablility of a specific demo for in store use.
Viera Link. Not all brands are fully compatible with
EasyLink. Example HDMI CEC branding names are
property of their respective owners. Reset TV Settings and Reinstall TV
37
(Home) > Settings > Region and
Channel Logos
language > Language > Primary text, Secondary
(Home) > Settings > General text
settings > Advanced > Channel logos Some digital TV broadcasters have several Text
In some countries, the TV can show the channel languages available.
logos. If you do not want these logos to appear, you
can switch them off.
Clock
38
to 0 minutes, the sleep timer is switched off. You can
always switch off your TV earlier or reset the time Lock Settings
during the countdown
Set Code and Change Code
(Home) > Settings > Universal access Set new code or reset change code. The child lock
code is used to lock or unlock channels or
With Universal Access switched on, the TV is programmes.
prepared for use for the deaf, hard of hearing, blind or
partially sighted people. Note: If you forgot your PIN code, you can override
the current code use 8888 and enter a new code.
Universal access for hearing impaired people Set a minumum age to watch rated programmes.
39
12
Wired Connection
Turn Wi-Fi On or Off
What You Need
(Home) > Settings > Network > Wi-Fi On/Off
To connect the TV to the Internet, you need a
network router with a connection to the
Internet. Use a high-speed (broadband) connection
to the Internet.
Make the Connection
40
network > Wired If your media files do not play on your TV, make sure
that the Digitial Media Renderer is switched on. As a
1 - Connect the router to the TV with a network cable
factory setting, DMR is switched on.
(Ethernet cable**).
2 - Make sure that the router is switched on.
3 - The TV constantly searches for the network
connection. Switch on Wi-Fi connection
4 - A message will be shown when the connection is (Home) > Settings > Network > Wi-Fi On/Off
successful.
You can switch on or off Wi-Fi connection on your
If the connection fails, you can check the DHCP TV.
setting of the router. DHCP should be switched on.
**To fulfill EMC regulations, use a shielded FTP Cat.
5E Ethernet cable. Reset Wi-Fi Miracast connection
(Home) > Settings > Network > Reset Wi-Fi
Miracast connection
12.3
Clear the list of connected and blocked devices that
Network Settings are used with Miracast.
(Home) > Settings > Network > Network (Home) > Settings > Network > Netflix
Configuration > Static IP settings
If you are an advanced user and want to install your With Netflix settings, you can view ESN number or
network with Static IP addressing, set the TV to Static deactive Netflix device.
IP.
41
13 Recommended Apps window.
Smart TV Search
With Search, you can search the App gallery for
13.1 relevant Apps.
Enter a keyword in the text field, select and
Setup Smart TV press OK to start searching. You can enter names,
titles, genres and description keywords to search.
The first time you open Smart TV, you need to Alternatively, you can leave the text field empty and
configure your connection. Read and agree to the search for the most popular searches/keywords for a
terms and conditions to continue. range of categories. In the list of found keywords,
The Smart TV start page is your link to the Internet. select a keyword and press OK to search for items
You can rent movies online, read newspapers, watch with that keyword.
videos and listen to music, also shop online, or watch
TV programmes when it suits you with On-line TV.
13.3
Open Smart TV
App Gallery
To open the Smart TV start page, press Smart TV .
Alternatively, you can press (Home) > Utilities, Open the App gallery in Smart TV to browse the
select Smart TV and press OK. Apps, the collection of tailored websites for TV.
The TV connects to the Internet and opens the Smart Find the App for YouTube videos, a national
TV start page. This may take a few seconds. newspaper, an online photo album, etc. There are
Apps to rent a video from an online video store and
Close Smart TV
Apps for watching programmes you missed. If the
To close the Smart TV start page, App gallery does not hold what you are looking for,
press (Home) and select another activity. try the World Wide Web and surf the Internet on TV.
TP Vision Europe B.V. bears no responsibility
regarding the content and the quality of the content
13.4
provided by the content service providers.
Multi View
13.2 While you are on a Smart TV App or the Internet, you
can watch the current TV channel. Multi view opens
Smart TV Start Page a small screen for the TV channel next to the Smart
TV screen.
Your Apps
To open Multi view…
You start Apps from the Smart TV start page. If the
start page does not hold any Apps yet, you can add 1 - Press SMART TV to open Smart TV.
Apps from the App gallery. 2 - Open an app in Smart TV page.
3 - Press MULTI VIEW to open the small screen.
App gallery 4 - Press + or – to change the TV channel
In the App gallery you find all available Apps. in the small screen.
* Not every Smart TV app can support Multi View
Internet
with a TV channel.
The Internet App opens the World Wide Web on your
TV.
On your TV, you can view any Internet website but
most of them are not tailored for a TV screen.
- Some plug-ins (e.g. to view pages or videos) are not
available on your TV.
- Internet pages are shown one page at a time and
full screen.
Recommended Apps
In this window, Philips presents a range of
recommended Apps for your country, Apps for Online
TV or a selection of rental movies from Video stores.
You can select and open them from the
42
14 Follow App
Ambilight+hue
Follow Audio
(Home) > Settings > Ambilight > Ambilight Configure the Hue Bulbs
style > Follow audio
Select one of the styles that follow the dynamics of Step 1 - Network
the sound. (Home) > Settings > Ambilight > Ambilight +
• Lumina - Mixes audio dynamics with video colours hue > Configure the hue bulbs
• Colora - Based on audio dynamics In this first step, you will prepare the TV to find
• Retro - Based on audio dynamics the Philips Hue Bridge. The TV and the Philips Hue
• Spectrum - Based on audio dynamics Bridge must use the same network.
• Scanner - Based on audio dynamics
• Rhytm - Based on audio dynamics Setting up…
• Party - A mix of all Follow audio styles, one after 1 - Connect the Philips Hue Bridge to the power
the other outlet.
2 - Connect the Philips Hue Bridge to the same
router you are using for the TV — use an Ethernet
Follow Colour cable to connect.
(Home) > Settings > Ambilight > Ambilight 3 - Switch on the Hue bulbs.
style > Follow colour To start the configuration…
Select one of the preset colour styles. 1
• Hot lava - Red colour variations - Press (Home) > Settings >
• Deep water - Blue colour variations Ambilight > Ambilight + hue > Configure the hue
• Fresh nature - Green colour variations bulbs.
2 - Select Start now and press OK. The TV will
• Warm white - Warm white colour variations search for the Philips Hue Bridge. If the TV is not yet
• Cool white - Cool white colour variations connected to your network, the TV will start the
network setup first. If the Philips Hue Bridge appears
in the list.
43
For more info on connecting the TV to your home bulb and the TV. The further away from the TV, the
network, in Help, press the colour weaker the Ambilight colour. Select the slider bar to
key Keywords and look up Network Settings. adjust the distance.
5 - Finally, set the Brightness of the bulb. Select
the slider bar to adjust the brightness.
Step 2 - Hue Bridge 6 - To stop configuring this bulb, select OK and
press OK.
In the next step, you will link up the TV with 7 - In the Configure Ambilight+hue menu, you can
the Philips Hue Bridge. do the same for each bulb.
The TV can only be linked up to one Hue Bridge. 8 - When all Ambilight+hue bulbs are configured,
select Finish and press OK.
To link the Hue Bridge…
Ambilight+hue is ready for use.
1 - With the TV connected to your home network, it
will show the available Hue Bridges. If the TV did not
find your Hue Bridge yet, you can select Scan
again and press OK. Ambilight+hue Settings
If the TV found the only Hue Bridge you have, select
the Hue Bridge name and press OK. (Home) > Settings > Ambilight > Ambilight +
If you have more than one Hue Bridge available, hue > Switch off
select the Hue Bridge you want to use and press OK. Switch off Ambilight+hue
2 - Select Start and press OK.
3 - Now go to the Philips Hue Bridge and press the
link button in the middle of the device. This will link (Home) > Settings > Ambilight > Ambilight +
the Hue Bridge with the TV. Do this within 30 hue > Immersion
seconds. The TV will confirm if a Hue Bridge is now
linked to the TV.
4 - Select OK and press OK. Press the arrows (up) or (down) to adjust
how accurate the Hue bulbs follow the Ambilight.
With the Philips Hue bridge linked to the TV, go to
page Hue bulbs.
(Home) > Settings > Ambilight > Ambilight +
hue > Lounge light+hue
Step 3 - Hue Bulbs If you installed Ambilight+hue, you can let the hue
In the next step, you will select the Philips Hue bulbs follow Lounge light from Ambilight. The Philips
bulbs that have to follow the Ambilight. hue lamps will expand the Lounge light effect across
You can select a maximum of 9 Philips Hue bulbs for the room.
Ambilight+hue.
To select the bulbs for Ambilight+hue… (Home) > Settings > Ambilight > Ambilight +
1 - In the list, mark the bulbs that have to follow the hue > View configuration
Ambilight. To mark a bulb, select the bulb name and View current setup of the Ambilight+hue, network,
press OK. When you mark a bulb, the bulb will blink Bridge and bulbs.
once.
2 - When you’re done, select OK and press OK.
(Home) > Settings > Ambilight > Ambilight +
hue > Reset configuration
Step 4 - Configure Bulb Reset current setup of the Ambilight+hue.
In the following step, you will configure each Philips
Hue bulb.
14.4
To configure each Hue bulb…
Advanced Ambilight Settings
1 - Select a bulb to configure and press OK. The
bulb you selected is flashing.
Wall colour
2 - Select Start and press OK.
3 - First indicate where you placed the bulb relative (Home) > Settings > Ambilight > Advanced >
to the TV. A correct setting of the Angle will send the Wall colour
correct Ambilight colour to the bulb. Select the slider • Neutralise the influence of a coloured wall on the
bar to adjust the position. Ambilight colours
4 - Secondly, indicate the Distance between the
44
• Select the colour of the wall behind the TV and the
TV will modify the Ambilight colours to appear as they
are intended.
TV switch off
(Home) > Settings > Ambilight >
Advanced > TV switch off
Set Ambilight to switch off immediately or slowly fade
out when you switch off the TV. The slow fade out
gives you some time to switch on the lights in your
living room.
45
15
Netflix
If you have a Netflix menbership subscription, you
can enjoy Netflix on this TV. Your TV must be
connected to the Internet.
To open Netflix, press to open the Netflix
App. You can open Netflix immediately from a TV in
standby.
www.netflix.com
46
16 * Energy consumption kWh per year, based on the
power consumption of the television operating 4
Environmental hours per day for 365 days. The actual energy
consumption depends on how the television is used.
16.1 ** When the TV is turned off with the remote control
and no function is active.
European Energy Label
The European Energy Label informs you on the 16.3
energy efficiency class of this product. The greener
the energy efficiency class of this product is, the End of Use
lower the energy it consumes.
On the label, you can find the energy efficiency class, Disposal of your old product and batteries
the average power consumption of this product in use
and the average energy consumption for 1 year. You Your product is designed and manufactured with high
can also find the power consumption values for this quality materials and components, which can be
product on the Philips website for your country recycled and reused.
at www.philips.com/TV
16.2
Product Fiche
43PUx6262
• Energy Efficiency Class : A+ When this crossed-out wheeled bin symbol is
• Visible Screen Size : 108 cm / 43 inch attached to a product it means that the product is
• On Mode Power Consumption (W) : 43 W covered by the European Directive 2012/19/EU.
• Annual Energy Consumption (kWh) * : 63 kWh
• Standby Power Consumption (W) ** : 0.30 W
• Display Resolution (Pixels) : 3840 x 2160
49PUx6262
• Energy Efficiency Class : A+
• Visible Screen Size : 123 cm / 49 inch
• On Mode Power Consumption (W) : 56 W
• Annual Energy Consumption (kWh) * : 82 kWh
• Standby Power Consumption (W) ** : 0.30 W
• Display Resolution (Pixels) : 3840 x 2160
50PUx6262
Please inform yourself about the local separate
• Energy Efficiency Class : A+
collection system for electrical and electronic
• Visible Screen Size : 126 cm / 50 inch
products.
• On Mode Power Consumption (W) : 61 W
• Annual Energy Consumption (kWh) * : 90 kWh Please act according to your local rules and do not
• Standby Power Consumption (W) ** : 0.30 W dispose of your old products with your normal
• Display Resolution (Pixels) : 3840 x 2160 household waste. Correct disposal of your old
55PUx6262 product helps to prevent potential negative
• Energy Efficiency Class : A+ consequences for the environment and human
• Visible Screen Size : 139 cm / 55 inch health.
• On Mode Power Consumption (W) : 63 W Your product contains batteries covered by the
• Annual Energy Consumption (kWh) * : 92 kWh European Directive 2006/66/EC, which cannot be
• Standby Power Consumption (W) ** : 0.30 W disposed with normal household waste.
• Display Resolution (Pixels) : 3840 x 2160
65PUx6262
• Energy Efficiency Class : A++
• Visible Screen Size : 164 cm / 65 inch
• On Mode Power Consumption (W) : 70 W
• Annual Energy Consumption (kWh) * : 103 kWh
• Standby Power Consumption (W) ** : 0.30 W
• Display Resolution (Pixels) : 3840 x 2160
47
Please find out for yourself about the local rules on
separate collection of batteries because correct
disposal will help to prevent negative consequences
for the environment and human health.
48
17 17.4
Power
• Mains power : AC 220-240V +/-10% HDMI
• Ambient temperature : 5°C to 35°C
• 480i - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz
For power consumption information, see • 480p - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz
chapter Product Fiche. • 576i - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz
The power rating stated on the product typeplate is • 576p - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz
the power consumption for this product during • 720p - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz
normal household use (IEC 62087 Ed.2). The • 1080i - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz
maximum power rating, stated between brackets, is • 1080p - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz
used for electrical safety (IEC 60065 Ed. 8.0). • 3840 x 2160p - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz
* Only for DVB-T2, DVB-S2 * Available when Source is set to HDMI 2 or HDMI 3
17.3
Component, Composite
Display Resolution Composite
Diagonal screen size • PAL, NTSC, SECAM
• 43PUx6262 : 108 cm / 43 inch Component
• 49PUx6262 : 123 cm / 49 inch
• 50PUx62x2 : 126 cm / 50 inch • 480i - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz
• 55PUx62x2 : 139 cm / 55 inch • 480p - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz
• 65PUx6262 : 164 cm / 65 inch • 576i - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz
• 576p - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz
Display resolution
• 720p - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz
• 3840 x 2160
• 1080i - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz
• 1080p - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz
49
17.5 17.8
• Incredible Surround
• Clear Sound
• Smart Sound
• Output power (RMS) : 20W
• Dolby® Digital
• DTS 2.0+ Digital out
17.7
Multimedia
Connections
• USB 2.0 / USB 3.0
• Ethernet LAN RJ-45
• Wi-Fi 802.11n (built-in)
Supported USB file systems
• FAT, NTFS
Playback formats
• Video Codec : AVI, MKV, HEVC, H.264/MPEG-4
AVC, MPEG1, MPEG2, MPEG4, WMV9/VC1, VP9
• Audio Codec : MP3, WAV, AAC, WMA (v2 up to
v9.2), WMA-PRO (v9 and v10)
• Subtitles :
- Format: SRT, SMI, SSA, SUB, ASS, TXT
- Character encodings : UTF-8, Central Europe and
Eastern Europe (Windows-1250), Cyrillic
(Windows-1251), Greek (Windows-1253), Turkish
(Windows-1254), Western Europe (Windows-1252)
• Image Codec : JPEG, GIF, PNG, BMP
Wi-Fi Certified
This TV supports Miracast certified devices.
Performance may vary, depending on the capabilities
of the mobile device and the software used.
50
18 respond to the remote control.
Creaking sound at startup or switch off
Troubleshooting When you are turning the TV on or standby, you hear
a creaking sound from the TV chassis. The creaking
18.1 sound is due to the normal expansion and
Tips contraction of the TV as it cools and warms up. This
does not affect performance.
If you can't find a solution for your TV problem in The TV goes back to standby after showing the
Troubleshooting, you can use Keywords in Help Philips startup screen
> User manual to find the information you are looking
for. Select a keyword to go the most relevant page in When the TV is in standby, a Philips startup screen is
the User manual. displayed, then the TV returns to standby mode. This
is normal behaviour. When the TV is disconnected
If the User manual doen't answer your question, you and reconnected to the power supply, the startup
can go to the support website of Philips. screen is displayed at the next startup. To switch on
To solve any Philips TV related problem, you can the TV from standby, press (Standby / On) the
consult our online support. You can select your remote control or the TV.
language and enter your product model number.
The standby light keeps on blinking
Go to www.philips.com/support.
Disconnect the power cable from the power outlet.
On the support site you can find your country's Wait 5 minutes before you reconnect the power
telephone number to contact us as well as answers to cable. If the blinking reoccurs, contact Philips TV
frequently asked questions (FAQs). In some countries, Consumer Care.
you can chat with one of our collaborators and ask In Help > User manual, press the colour
your question directly or send a question by email. key Keywords and look up Contact Info.
You can download new TV software or the manual to
read on your computer. TV switches off by itself
For more TV troubleshooting and frequently asked If the TV switches off suddenly, the setting Switch off
questions (FAQs)... timer might be switched on. With Switch off
timer the TV switches off after 4 hours if no remote
Go control signals were received. To avoid this automatic
to http://philips-tvconsumercare.kxondemand.com/ switch off, you can deactivate this switch off.
portal/en/ModelSelect In Help > User manual, press the colour
key Keywords and look up Switch Off Timer.
Also, if the TV does not receive a TV signal nor a
TV Help on your tablet, smartphone or computer remote control command for 10 minutes, the TV
To carry out extended sequences of instructions more switches off automatically.
easily, you can download the TV Help in PDF format
to read on your smartphone, tablet or
computer. Alternatively, you can print the relevant
Help page from your computer. 18.3
To download the Help (user manual) go
to www.philips.com/support Remote Control
TV does not respond to the remote control
18.2 • The TV requires some time to start up. During this
time, the TV does not respond to the remote control
Switch On or TV controls. This is normal behaviour.
• The batteries of the remote control might be empty.
The TV does not switch on Replace the batteries with new ones.
• Disconnect the power cable from the power outlet.
Wait for one minute then reconnect it. Make sure that
the power cable is securely connected. Try switching
on again.
• Connect the TV to another wall mains socket and try
switching on.
• Disconnect all connected devices from the TV and
try switching on.
• If the standby light on TV is on, the TV might not
51
18.4 18.5
Channels Satellite
No digital channels found during the installation The TV cannot find the satellites I want or the TV
• Check if the TV was connected with an antenna or is installs the same satellite twice
using a provider signal. Check the cable connections.
Check if the correct number of satellites is set in
• Check if the country where you install the TV, has
settings at the start of the installation. You can set the
digital channels available.
TV to search for One, Two or 3/4 satellites.
• Check if you selected the correct DVB (Digital Video
Broadcast) system. Select DVB-T (terrestrial) when A dual head LNB cannot find a second satellite
you use an antenna or common antenna, select DVB- • If the TV finds one satellite but cannot find a second
C (cable) if you use a TV cable service with a CAM one, turn the dish a few degrees. Align the dish to get
module. the strongest signal on the first satellite. Check the
• Redo the installation and check if you select the signal strength indicator of the first satellite on-
correct country and system. screen.
No analogue channels found during the installation • Check if the settings are set to two satellites.
• Check if the TV was connected with an antenna. Changing the installation settings did not solve my
Check the cable connections. problem
• Check if you selected the correct DVB (Digital Video
All settings, satellites and channels are only stored at
Broadcast) system. Select DVB-T (terrestrial) when
the end of the installation when you finish.
you use an antenna or common antenna.
• Redo the installation and select Digital and All satellite channels are gone
analogue channels during the installation.
Some channels disappeared, cannot find all or some If you use a Unicable system, make sure you assigned
two unique user band numbers for both built-in
previously installed channels
tuners in the Unicable settings. It might be that
• Check if you selected the correct Channel
another satellite receiver in your Unicable system is
list or Favourites list you normally use.
using the same user band number.
• Some channels might be moved or even deleted by
the broadcaster. In the normal channels list, try to Some satellite channels seem to have disappeared
search for the channel you're missing. If the channel is from the channel list
still available, you can put it back in the favourites
If some channels seem to be gone or displaced, the
list.
broadcaster might have changed the transponder
• A channel can be deleted from the channel
location of these channels. To restore the channel
list during Automatic channel update. These
positions in the channel list, you can try an update of
automatic updates are done overnight if the TV is on
the channel package.
standby.
Channels that do not exist anymore are deleted and I cannot remove a satellite
new channels will be added to the channel list.
Exceptionally, a channel can be deleted because the Subscription packages do not allow removing a
TV could not find it while checking for its presence. It satellite. To remove the satellite, you have to do a
might not broadcast at night. complete installation again and select another
To avoid channels being deleted during package.
the Automatic channel update because the TV Sometimes the reception is poor
could not find them although these channels are still • Check if the satellite dish is solidly mounted. Strong
there, you can switch off Automatic channel update. winds can move the dish.
(Home) > Settings > Antenna/cable • Snow and rain can degrade the reception.
installlation, Satellite installtion* > Automatic
channel update
* Satellite installtion is only for xxPUS6162, 18.6
xxPUS6262, xxPUS6272 TV models.
Picture
DVB-T2 HEVC channel
• See the technical specifications to make sure that No picture / distorted picture
your TV supports DVB-T2 HEVC in your country and • Check if the TV is connected with an antenna or is
reinstall DVB-T channel. using a provider signal. Check the cable connections.
• Check if the correct source/input is selected in the
sources menu. Press Sources and select the
source/input you need.
52
• Check if the the external device or source is settings > Location
properly connected.
• Check if the reception is poor. A banner appears
• Check if the picture is set to a minimal value. If an on screen promotion banner appears
Select Picture style and select a style and press OK. occasionally or the Picture style automatically
(Home) > Settings > Picture > Picture style switches back to Vivid at startup, the TV is in Shop
• To check if the TV is broken, try to play a video clip. location. Set the TV to Home location for use at
Press Settings > Help > Check the TV. home.
If the video clip stays black, call Philips. Wait until the (Home) > Settings > General
clip ends and select Contact info in the Help menu. settings > Location
Call the telephone number for your country.
Picture does not fit the screen / Wrong or unstable
Sound but no picture
picture size / Picture position is incorrect
• Change to other video sources and then change
• If the picture size - its aspect ratio - does not fit the
back to current source.
screen, with black bars on the top and bottom or left
• Select Picture style and select a style and
and right side of the screen, press Picture
press OK.
Format > Fill screen.
(Home) > All settings > Picture > Picture style
• If the picture size changes all the
• Restore picture style, select back to Picture style,
time, press Picture Format > Fit to screen.
then press Restore style.
• If the position of the picture is incorrect on the
• Reset all TV settings, go
screen, try to check the signal resolution and output
to (Home) > Settings > General
type of the connected device, press Picture
settings > Reinstall TV.
Format > Original.
• Check the connections of the source/input devices.
Computer picture is not stable
Poor reception
Make sure that your PC uses the supported resolution
If the TV picture is distorted or variable in quality, the
and refresh rate.
input signal might be poor. A weak digital signal is
seen as a picture that is breaking up in square blocks
and freezes occasionally. Much sooner than a bad
18.7
analogue signal, a bad digital signal will fall away.
• Check if the antenna cable is properly connected. Sound
• Large loudspeakers, unearthed audio devices, neon
lights, high buildings and other large objects can No sound or poor sound quality
influence reception quality when you are using an • Check if the sound settings of the TV are OK, press
antenna. Try to improve the reception by changing the volume or mute key.
the antenna direction or moving devices away from • If you use a digital receiver (set-top box), check if
the TV. Bad weather might deteriorate the reception. the volume on this receiver is not set to zero or mute.
• Check if all connections, to and from your devices, • Check if the TV - the audio signal - is properly
are properly connected. connected with the Home Theatre System, if you use
• If reception on only one channel is poor, fine-tune such a system for the TV sound. Check if you
this channel with Analogue: manual installation. (Only connected the HDMI cable to an HDMI1
for analogue channels) ARC connection on the Home Theatre System.
(Home) > Settings > Antenna/cable • Make sure that the TV audio output is connected to
installlation > Analogue: manual installation the audio input on the Home Theatre System.
• Check if the incoming digital signal is sufficiently Sound should be heard from the HTS (Home Theatre
strong. While watching a digital channel, System) speakers.
press OPTIONS and select Status and Sound with loud noise
press OK. Check the Signal strenght and Signal
If you watch a video from a plugged in USB flash drive
quality.
or connected computer, the sound from your Home
Poor picture from a device Theatre System might be distorted. This noise is heard
• Make sure that the device is connected properly. when the audio or video file has DTS sound but the
Make sure that the device's output video setting is the Home Theatre System has no DTS sound processing.
highest possible resolution if applicable. You can fix this by setting the Digital out format of
• Restore picture style or change to another picture the TV to Stereo.
style. Press (Home) > Settings > Sound >
Picture settings change after a while Advanced > Digital out format
Make sure that Location is set to Home . You can
change and save settings in this mode.
(Home) > Settings > General
53
18.8 18.10
18.9
USB
Photos, videos and music from a USB device do not
show
• Check if the USB storage device is set to Mass
Storage Class compliant, as described in the storage
device's documentation.
• Check if the USB storage device is compatible with
the TV.
• Check if the audio and picture file formats are
supported by the TV. For more information, in Help,
press the colour key Keywords and look
up Multimedia.
Choppy playback of USB files
• The transfer performance of the USB storage device
may limit the data transfer rate to the TV which
causes poor playback.
54
19 ensure that the power voltage matches the value
printed on the back of the TV. Never connect the TV
Safety and Care to the power outlet if the voltage is different.
19.1
55
Humidity
In rare occasions, depending on temperature and
humidity, minor condensation can occur on the inside
of the TV glass front (on some models). To prevent
this, do not expose the TV to direct sunlight, heat or
extreme humidity. If condensation occurs, it will
disappear spontaneously while the TV is playing for a
few hours.
The condensation moisture will not harm the TV or
cause malfunction.
19.2
Screen Care
Clean
• Never touch, push, rub or strike the screen with any
object.
• Unplug the TV before cleaning.
• Clean the TV and frame with a soft damp cloth and
wipe gently. Never use substances such as alcohol,
chemicals or household cleaners on the TV.
• To avoid deformations and colour fading, wipe off
water drops as quickly as possible.
• Avoid stationary images as much as possible.
Stationary images are images that remain onscreen
for extended periods of time. Stationary images
include onscreen menus, black bars, time displays,
etc. If you must use stationary images, reduce screen
contrast and brightness to avoid screen damage.
56
20 CE compliance
Hereby, TP Vision Europe B.V. declares that this
Terms of Use television is in compliance with the essential
requirements and other relevant provisions of
Directives 2014/53/EU (RED), 2009/125/EC (Eco
2017 © TP Vision Europe B.V. All rights reserved.
Design), 2010/30/EU (Energy Labelling) and
This product was brought to the market by TP Vision 2011/65/EC (RoHS).
Europe B.V. or one of its affiliates, hereinafter referred
Compliance with EMF
to as TP Vision, which is the manufacturer of the
TP Vision manufactures and sells many products
product. TP Vision is the warrantor in relation to the
targeted at consumers which, like any electronic
TV with which this booklet was packaged. Philips and
apparatus, in general have the ability to emit and
the Philips Shield Emblem are registered trademarks
receive electromagnetic signals. One of TP Vision’s
of Koninklijke Philips N.V.
leading business principles is to take all necessary
Specifications are subject to change without notice. health and safety measures for our products, to
Trademarks are the property of Koninklijke Philips N.V comply with all applicable legal requirements and to
or their respective owners. TP Vision reserves the right stay well within the Electro Magnetic Field (EMF)
to change products at any time without being obliged standards applicable at the time of producing the
to adjust earlier supplies accordingly. products.
The written material packaged with the TV and the TP Vision is committed to developing, producing and
manual stored in the memory of the TV or marketing products that cause no adverse health
downloaded from the Philips effects. TP Vision confirms that, as long as its products
website www.philips.com/support are believed to are handled properly for their intended use, they are
be adequate for the intended use of the system. safe to use according to scientific evidence available
today. TP Vision plays an active role in the
The material in this manual is believed adequate for
development of international EMF and safety
the intended use of the system. If the product, or its
standards, enabling TP Vision to anticipate further
individual modules or procedures, are used for
developments in standardisation for early integration
purposes other than those specified herein,
in its products.
confirmation of their validity and suitability must be
obtained. TP Vision warrants that the material itself
does not infringe any United States patents. No
further warranty is expressed or implied. TP Vision
cannot be held responsible neither for any errors in
the content of this document nor for any problems as
a result of the content in this document. Errors
reported to Philips will be adapted and published on
the Philips support website as soon as possible.
Terms of warranty - Risk of injury, damage to TV or
void of warranty!
Never attempt to repair the TV yourself. Use the TV
and accessories only as intended by the
manufacturer. The caution sign printed on the back of
the TV indicates risk of electric shock. Never remove
the TV cover. Always contact Philips TV Customer
Care for service or repairs. Find the telephone number
in the printed documentation that came with the
TV. Or consult our
website www.philips.com/support and select your
country if needed. Any operation expressly prohibited
in this manual, or any adjustments and assembly
procedures not recommended or authorised in this
manual, shall void the warranty.
Pixel characteristics
This LCD/LED product has a high number of colour
pixels. Although it has effective pixels of 99.999% or
more, black dots or bright points of light (red, green or
blue) may appear constantly on the screen. This is a
structural property of the display (within common
industry standards) and is not a malfunction.
57
21 21.4
21.5
21.6
Wi-Fi Alliance
21.3 Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are
registered trademarks of the Wi-Fi Alliance.
HDMI
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
21.7
Other Trademarks
All other registered and unregistered trademarks are
the property of their respective owners.
58
22 P1003.2/ISO 9945.2 Shell and Tools standard.
It offers functional improvements over sh for both
Open Source programming and interactive use.
In addition, most sh scripts can be run by Bash
22.1 without modification.
Source: http://www.gnu.org/software/bash/
Open Source Software
c-ares (1.10.0)
This television contains open source software. TP c-ares is a C library that performs DNS requests and
Vision Europe B.V. hereby offers to deliver, upon name resolves asynchronously.
request, a copy of the complete corresponding Source: http://c-ares.haxx.se/
source code for the copyrighted open source
software packages used in this product for which such coreutils (6.9)
offer is requested by the respective licences. The GNU Core Utilities are the basic file, shell and text
manipulation utilities of the GNU operating system.
This offer is valid up to three years after product
These are the core utilities which are expected to
purchase to anyone in receipt of this information.
exist on every operating system.
To obtain the source code, please write in English to .
Source: http://www.gnu.org/software/coreutils/
..
open.source@tpvision.com e2fsprogs (2.12.2)
e2fsprogs provides the filesystem utilities for use with
the ext2 filesystem, it also supports the ext3 and ext4
22.2 filesystems.
This piece of software is made available under the
Open Source License terms and conditions of the e2fsprogs license, which
can be found below.
About Open Source License Source: http://e2fsprogs.sourceforge.net/
README for the source code of the parts of TP Vision Expat (2.01)
Netherlands B.V. TV software that fall under open xml paser; Expat is an XML parser library written in C.
source licenses. It is a stream-oriented parser in which an application
This is a document describing the distribution of the registers handlers for things the parser might find in
source code used on the TP Vision Netherlands B.V. the XML document (like start tags). An introductory
TV, which fall either under the GNU General Public article on using.
License (the GPL), or the GNU Lesser General Public This piece of software is made available under the
License (the LGPL), or any other open source license. terms and conditions of the Expat license, which can
Instructions to obtain copies of this software can be be found below.
found in the Directions For Use. Source: http://expat.sourceforge.net/
59
The GNU Find Utilities are the basic directory Source: http://www.gnu.org/software/inetutils/
searching utilities of the GNU operating system.
These programs are typically used in conjunction with iptables (1.4.15)
other programs to provide modular and powerful For Cross connection.
directory search and file locating capabilities to other Source: http://www.netfilter.org/projects/iptables/
commands.
Source: http://www.gnu.org/software/findutils/ iputils (s20101006)
The iputils package is set of small useful utilities for
Freetype (2.4.3) Linux networking. It was originally maintained by
FreeType is a software font engine that is designed to Alexey Kuznetsov.
be small, efficient, highly customizable, and portable Source: http://www.skbuff.net/iputils/
while capable of producing high-quality output
(glyph images). Libcurl (7.30.0)
Source: http://freetype.sourceforge.net HTTP client;libcurl is a free and easy-to-use client-
side URL transfer library, supporting FTP, FTPS, HTTP,
fuse (2.8.4) HTTPS, SCP, SFTP, TFTP, TELNET, DICT, LDAP,
Fuse is a simple interface for userspace programs to LDAPS, FILE, IMAP, SMTP, POP3 and RTSP. libcurl
export a virtual filesystem to the linux kernel. supports SSL certificates, HTTP POST, HTTP PUT, FTP
This piece of software is made available under the uploading, HTTP form based upload, proxies, cookies,
terms and conditions of the fuse license, which can user+password authentication (Basic, Digest, NTLM,
be found below. Negotiate, Kerberos4), file transfer resume, http proxy
Source: http://fuse.sourceforge.net/ tunneling and more!
This piece of software is made available under the
gawk (3.1.5) terms and conditions of the Libcurl license, which can
If you are like many computer users, you would be found below.
frequently like to make changes in various text files Source: http://curl.haxx.se/
wherever certain patterns appear, or extract data from
parts of certain lines while discarding the rest. libiconv (1.11.1)
To write a program to do this in a language such as C This library provides an iconv() implementation, for
or Pascal is a time-consuming inconvenience that use on systems which don't have one, or whose
may take many lines of code. implementation cannot convert from/to Unicode. .
The job is easy with awk, especially the GNU This piece of software is made available under the
implementation: gawk. terms and conditions of the libiconv license, which
Source: http://www.gnu.org/software/gawk/ can be found below.
Source: http://ftp.gnu.org/pub/gnu/libiconv
glibc (2.12.2)
Any Unix-like operating system needs a C library: the libmtp (0.3.6)
library which defines the “system calls” and other libmtp is an Initiator implementation of the Media
basic facilities such as open, malloc, printf, exit...The Transfer Protocol (MTP) in the form of a library
GNU C library is used as the C library in the GNU suitable primarily for POSIX compliant operating
system and most systems with the Linux kernel systems. We implement MTP Basic, the stuff
This piece of software is made available under the proposed for standardization.
terms and conditions of the glibc license, which can Source: http://libmtp.sourceforge.net/
be found below.
Source: http://www.gnu.org/software/libc/ libjpg (6b)
This library is used to perform JPEG decoding tasks.
grep (2.5.1a) This piece of software is made available under the
The grep command searches one or more input files terms and conditions of the libjpg license, which can
for lines containing a match to a specified pattern. By be found below.
default, grep prints the matching lines. Source: http://www.ijg.org/
Source: http://www.gnu.org/software/grep/
libusb
gzip (1.3.12) This is the home of libusb, a library that gives user
GNU Gzip is a popular data compression program level applications uniform access to USB devices
originally written by Jean-loup Gailly for the GNU across many different operating systems. libusb is an
project. Mark Adler wrote the decompression part. open source project licensed under the GNU Lesser
Source: http://www.gnu.org/software/gzip/ General Public License version 2.1.
Many participants in the libusb community have
inetutils (1.4.2) helped and continue to help with ideas,
Inetutils is a collection of common network programs. implementation, support and improvements for
60
libusb. ain_Page
This piece of software is made available under the
terms and conditions of the libusb license, which can mtd-utils
be found below. The aim of the system is to make it simple to provide
Source: a driver for new hardware, by providing a generic
http://libusb.wiki.sourceforge.net interface between the hardware drivers and the upper
http://www.libusb.org/ layers of the system. Hardware drivers need to know
nothing about the storage formats used, such as FTL,
libusb-compat FFS2, etc., but will only need to provide simple
Library to enable user space application programs to routines for read, write and erase. Presentation of the
communicate with USB devices. device's contents to the user in an appropriate form
This piece of software is made available under the will be handled by the upper layers of the system.
terms and conditions of the libusb-compat license, This piece of software is made available under the
which can be found below. terms and conditions of the mtd-utils license, which
Source: can be found below.
http://libusb.wiki.sourceforge.net/LibusbCompat0.1 Source: http://www.linux-
mtd.infradead.org/index.html
libpng (1.2.43)
libpng -THE reference library for reading, displaying, ncurses (5.7)
writing and examining png Image Network Graphics. The ncurses (new curses) library is a free software
This piece of software is made available under the emulation of curses in System V Release 4.0 (SVr4),
terms and conditions of the libpng license, which can and more. It uses terminfo format, supports pads and
be found below. color and multiple highlights and forms characters
Source: http://sourceforge.net/projects/libpng/files/ and function-key mapping, and has all the other
SVr4-curses enhancements over BSD curses. SVr4
Libxml2 (2.7.8) curses is better known today as X/Open Curses.
The "libxml2" library is used in AstroTV as a support Source: http://www.gnu.org/software/ncurses/
for the execution of NCL application. This library was
developed for the GNOME software suite and is net-tools (1.6)
available under a "MIT" license. The Net-tools?package is a collection of programs for
Source: http://www.xmlsoft.org controlling the network subsystem of the Linux kernel.
Source: http://www.linuxfromscratch.org/blfs/view/6.
Linux Kernel (3.1) 3/basicnet/net-tools.html
The Linux kernel is an operating system kernel used
by the Linux family of Unix-like operating systems. NTFS-3G Read/Write Driver (2010.5.22)
This piece of software is made available under the NTFS-3G is an open source cross-platform
terms and conditions of the Linux Kernel license, implementation of the Microsoft Windows NTFS file
which can be found below. system with read-write support. NTFS-3G often uses
Source: http://www.kernel.org the FUSE file system interface, so it can run
unmodified on many different operating systems. It is
Linux Fusion (8.7.0) runnable on Linux, FreeBSD, NetBSD, OpenSolaris,
Source: GNU BeOS, QNX, WinCE, Nucleus, VxWorks,
Haiku,MorphOS, and Mac OS X It is licensed under
liveMedia (2011.06.12) either the GNU General Public License or a
c++ runtime library for RTSP requirement proprietary license. It is a partial fork of ntfsprogs and
Source: www.live555.com is under active maintenance and development.
This piece of software is made available under the
lvm2 (2.02.89) terms and conditions of the NTFS-3G Read/Write
Userspace toolset that provide logical volume Driver license, which can be found below.
management facilities on linux. Source: http://www.tuxera.com
This piece of software is made available under the
terms and conditions of the lvm2 license, which can openssl (1.0.1j)
be found below. OpenSSL is an open source implementation of the
Source: ftp://sources.redhat.com/pub/lvm2/releases/ SSL and TLS protocols. The core library (written in the
C programming language) implements the basic
module-init-tools (3.12) cryptographic functions and provides various utility
Provides developer documentation for the utilities functions. Wrappers allowing the use of the OpenSSL
used by Linux systems to load and manage kernel library in a variety of computer languages are
modules (commonly referred to as "drivers"). available.
Source: https://modules.wiki.kernel.org/index.php/M Source: http://www.openssl.org/
61
procps (ps, top) (3.2.8) to run .
procps is the package that has a bunch of small This piece of software is made available under the
useful utilities that give information about processes terms and conditions of the u-Boot loader license,
using the /proc filesystem. which can be found below.
The package includes the programs ps, top, vmstat, w, Source: http://www.denx.de
kill, free, slabtop, and skill.
Source: http://procps.sourceforge.net/index.html udhcpc (0.9.8cvs20050303-3)
Source: http://udhcp.sourcearchive.com/downloads/
samba (3.0.37) 0.9.8cvs20050303-3/
Samba is the standard Windows interoperability suite
of programs for Linux and Unix. uDirectFB (1.5.3)
Source: http://www.samba.org/ Source: http://www.directfb.org
u-Boot (2011.12)
The uboot will load the linux kerenl to dram,and jump
62
23
Disclaimer regarding
services and/or
software offered by
third parties
Services and/or software offered by third parties may
be changed, suspended, or terminated without prior
notice. TP Vision does not bear any responsibility in
these sorts of situations.
63
Index
A E
Advanced Ambilight Settings 44 End of Use 47
Advanced Picture Settings 32 Energy Saving 36
Advanced Settings 37 European Eco-label 47
Advanced Sound Settings 35
Ambilight 43 F
Ambilight Style 43 Favourite Channel, Channel Range 23
Ambilight+hue 43 Favourite Channel, Create 22
Ambilight+hue, Hue Bulbs 43 Favourite Channel, Edit 22
Ambilight, Brightness 43 Favourite Channels 23
Ambilight, Saturation 43 G
Antenna 10
Gamma 33
App Gallery 42
General Settings 36
Audio Language 38
Audio Out Menu 35 H
Auto Clock Mode 38 HbbTV 38
HDMI 10
B
HDMI - CEC 36
Bass 34
HDMI ARC 11
Batteries 5
HDMI Sound System 35
C HDMI Ultra HD 37
CAM Operator Profile 36 HDR 33
CAM PIN 39 Headphone Connection 12
Channel List 22 Headphone Volume 35
Channel List Copy 20 Help Menu 3
Channel Logos 38 Home Menu 31
Channel Options 21 Home or Shop 37
Channel, Channel Filter 23 I
Channel, Rename Channel 22
Identify TV 3
Channels 17
Input Resolution 49
Child Lock 39
Install Channel - Antenna 17
Child Lock, Change Code 39
Install Channel - Cable 17
Child Lock, Set Code 39
Install Channel - Satellite 19
CI Card 13
Clear Internet Memory 41 K
Clear Sound 35 Keys on TV 6
Clock 38
Colour 32 L
Colour Enhancement 32 Location 37
Colour Settings 32 Lock Channel 23
Colour Temperature 32
Component - Y Pb Pr 11
M
Composite - CVBS 11 Menu Languages 38
Computer Picture Setting 32 MHL Connection 13
Connect Device 10 Miracast 12
Consumer Care 3 Miracast Connection 12
Contact Info 3 Mouse Settings 36
Contrast 32 Multi View 42
Multimedia 50
D
Date 38
N
Daylight Saving 38 Netflix Settings 41
Digital Audio Out - Optical 11 Network - Wired 40
Digital Media Renderer - DMR 41 Network - Wireless 40
Digital Out Delay 35 Network Settings 40
Digital Out Format 35 Network Settings Menu 41
Digital Out Levelling 35 O
Digital Out Menu 35 On-line User Manual 3
Digital Out Offset 35
Dynamic Contrast 33 P
Parental Rating 39
64
Pause TV 28 TV Speaker 35
Philips Support 3
Philips TV Remote App 13 U
Photos, Videos and Music 29 Ultra Resolution 33
Picture Clean, Noise Reduction 33 Universal Access 39
Picture Contrast Menu 33 Universal Access, Audio Description 39
Picture Contrast Mode 33 Universal Access, Audio Effects 39
Picture Format 34 Universal Access, Hearing Impaired 39
Picture Motion 33 Universal Access, Mixed Volume 39
Picture Motion Style 33 Universal Access, Speakers or Headphones 39
Picture Style 31 Universal Access, Speech 39
Picture, Colour 32 Unlock Channel 23
Picture, Contrast 32 Update Software 4
Picture, Sharpness 32 Update Software - Internet 4
Power Cable 8 Update Software - Local Updates 4
Problems 51 Update Software - OAD 4
Product Energy Information 47 Update Software - USB 4
USB Flash Drive 14
Q USB Hard Drive 36
Quick Picture Settings 34 USB Hard Drive - Format 14
Quick Settings Menu 31 USB Hard Drive - Install 14
USB Hard Drive Connection 14
R USB Keyboard Settings 36
Re-scan Connection 16 User Manual 3
Reception 49 Utilities Menu 31
Recordings 27
Register TV 3 V
Remote Control 5 Video Contrast 33
Remote Control - IR Sensor 6 View Network Settings 41
Remote Control and Batteries 5 Viewing Distance 8
Remote Control Key 5
Rename Device 16 W
Repair 3 Wall Mounting 8
Reset Settings 37 Wi-Fi 41
S
Safety and Care 55
Satellite 10
Screen Off 36
Sharpness 32
Shop Setup 37
Sleep Timer 38
Smart TV 42
Software Version 4
Sound Menu 34
Sound Style 34
Sound Surround Mode 35
Sound, Auto Volume Levelling 35
Sound, Delta Volume 35
Source List 16
Standby Mode 9
Static IP 41
Subtitle Language 38
Switch Off Timer 36
Switch On with Wi-Fi 41
Switching On 9
T
Teletext 24
Text 24
Time 38
Time Zone 38
Troubleshooting 51
TV Display Resolution 49
TV Guide 25
TV Guide Data 37
TV Network Name 41
TV Placement 35
65
66