Pro20 - Driver - Installation - Final
Pro20 - Driver - Installation - Final
Pro20 - Driver - Installation - Final
Fig. 1.1
Fig.1.2
3. To download install SecuGen finger print scanner go to following FTP link
Link 1
ftp://61.8.148.198
username: commonftp1
password: Secugen!@#
In above FTP link click on “Secugen_Drivers” then go to Hamster pro20 Folder and
download following files / rar Folder
How-to-install-HU20-driver(legacy).docx
Hamster_Pro20_Driver_x86_X64_with_SGDX_Utility.rar
Windows7_8_Pro20_Driver_ Installation_Activex_Control_Enable.pdf
Fig. 1.3
Fig. 1.4
Fig.1.5
To install the device driver, the Windows Device Manger will be helpful. You can run Device
Manager in two ways on Windows X P,7,8,10.
a. “Start -> Control Panel -> Hardware and Sound -> Device Manager in “Devices and
Printers”
OR
Fig. 1.6
9. The Manager shows H20 device as “SecuGen USB U20”.
Fig. 1.7
10. Right-click on the H20 device and select “Update Driver Software…”
Fig.1.8
11. A dialog box shows up and you choose “Browser my computer for driver software.”
Fig. 1.9
12. Locate HU20 device driver. You have to choose the driver for x86 or x64
Fig. 1.10
13. You should see the message, “… successfully updated your driver…”
Fig. 1.11
14. Now, you can see the right device driver for HU20.
Fig.1.12
Fig.1.13
<Properties>
a: If you are not able to skip automatic driver installation process ( Fig. 1.4) windows will installed it’s
default driver and In device Manager under Biometric Devices it will show “Secugen Finger print Device”
b) To Uninstalled “Secugen Finger print Device” driver Right Click on “Secugen Finger print
Device” and select uninstall option, it will prompt to uninstalled driver click on small square box and
clock on ok.
c: Then click on Action Tab from your Device Manager Window and select “scan for new hardware”
option, again start device driver installation process as shown in (Fig. 1.3)
After above installation please conform then of device as “ SecuGen U20 FRD” in device
manager
After above conformation run sgdx.exe and conform successful installation by capturing
your finger print
After that run SGDX form Your Driver Downloaded Folder. After that click on init and then
put your finger on device and click on capture.
Fig.1.14
16. After completing the above process, open below another ftp link in your
Download “Latest_FDx SDK Pro for Windows v3.7.rar” file from below ftp link
Link 2
ftp://61.8.148.198
username: dotnetsdk
password: Secugen!@#
Completing this Setup You will automatically redirect / open to C:\Documents and
Settings\All Users\Start Menu\Programs\SecuGen FDx SDK Pro for Windows folder.
OR
Fig.1.15
Fig.1.16
Fig.1.17
Now put your Finger on Device and Click on capture Button, if it scan your fingerprint then your
ActiveX control is work properly.
Click on “Security Tab” - Select “Trusted Sites” then click on “Sites” Options
Click on “Custom Level” option and select “Activex control and Plug-ins” and
enable all “Activex control and Plug-ins”.
Fig.1.18
Click on Run-Add-on on All Website it will asked to run popup window, just click on run.
Fig.1.19
After Allowing Actives Control Page should Display Like Below Image.
Fig.1.20
If everything is ok then select your device from device type then click on open device and
then put your finger on device and click on capture on all windows.
Fig.1.21
If it’s working then you can open the IGR, IPDS or efilling sites etc.
Step1: Check Internet explorer version
Open your Internet Explorer go to setting and click on About Internet Explorer which is
shown on below screenshot. (See Red Round). It should be IE9.
Step2: Open your Internet Explorer go to option ‘setting’ and click on Internet Option which
is shown on screenshot below.(See Red Round)
Step3: In ‘Internet Options’ window Click Security option and choose Trusted Sites. ‘Trusted
site’ window will be displayed. Enter IP address or URL of the site and click on Add button .
Click on Close button. Open the site in browser and click on Add button then click on Close
button. Follow the below Screen shot and select as per shown in the screen shot.
Step4: Click Custom Level from Trusted Sites option Enable all .NET Framework
Component. Follow the below screen shot and select option as shown in the screen shot .
Step5: Further drag the scroll bar until .Net Framework-reliant Component option will come
Follow the below screen shot and select option as per shown in the screen shot.
Step6: Further drag the scroll bar until ActiveX controls and plug-ins option will come
Follow the below screen shot and select option as per shown in the screen shot.
Step7: Further drag the scroll bar until Binary and script behaviors option will come
Follow the below screen shot and select option as per shown in the screen shot.
Step8: Further drag the scroll bar until Initialize and script Activex controls not marked as
safe for scripting option will come. Follow the below screen shot and select option as per
shown in the screen shot.
Step 9: Further drag the scroll bar until Use Pop-up Blocker option will come. Follow the
below screen shot and select option as per shown in the screen shot and click OK.
Step10: Finally click on OK Button which is shown on below screen shot.