Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 164 views

    Injector Specification (RSN) : Assembly No: 35107

    Uploaded by

    RENE

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Injector Specification (RSN) : Assembly No: 35107

    Uploaded by

    RENE
    164 views1 page

    Original Title

    35107

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    164 views1 page

    Injector Specification (RSN) : Assembly No: 35107

    Uploaded by

    RENE

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    INJECTOR SPECIFICATION (RSN®)

    EDITION : 3
    ENGINE MODEL NO: 4045H, 4045T, 6068H, 6068T ASSEMBLY NO: 35107
    DATED: 03-09-06 SUPERSEDES:
    CUSTOMER: JOHN DEERE CUSTOMER PART NO: RE-507766
    TEST STAND: ISO 8984 NOTE: Reference Pencil Nozzle Service Manual
    1. CALIBRATION FLUID…SAE J967 / ISO 4113 99002, Service Bulletin 467 & 467A
    (Ref. S.B. 201) AT ROOM TEMPERATURE (70°-80° F) for additional service information.
    2. CALIBRATION HIGH PRESSURE PIPES…0.063 X 12”
    (1.6 X 305 mm)

    INJECTOR SETTINGS
    THE FOLLOWING ITEMS USED IN CONJUNCTION WITH THE
    1. OPENING PRESSURE SETTINGS: NOZZLE ASSEMBLY ARE PURCHASED SEPARATELY:
    SET CHECK
    A. PROTECTIVE SHIPPING CAPS NO. 26888 & 26891
    ** NEW 3820 ± 40 PSI 3740 PSI MIN. B. NOZZLE CLAMP ASSEMBLY NO. 35104
    (263.5 ± 2.8 bar) (257.5 bar)
    SERVICE 3620 ± 40 PSI 3410 PSI MIN.
    (249.5 ± 2.8 bar) (235 bar)
    2. VALVE LIFT: TURN 7/8 ± 1/16 .0156 (0.4mm) NOMINAL
    3. SPRAY ORIFICE SIZE: .0116 (0.295mm) * ASSEMBLY TORQUE:
    4. SPRAY ORIFICE NUMBER: 4 30683 75-85 lbf·in (8.5-9.6 N·m)
    5. SAC TYPE: TAPERED MINI 24186 35-45 lbf·in (4.0-5.1 N·m)
    6. CHECK NOZZLE “CHATTER” PER PENCIL NOZZLE SERVICE 33581 55-80 lbf·in (6.2-9.0 N·m)
    MANUAL 99002, SERVICE BULLETIN 467 & 467A.
    IF ACCEPTABLE PROCEED TO STEP 7.
    7. RETURN OIL LEAKAGE: 1 TO 14 DROPS / 30 SECONDS
    MAX. AT 1500 PSI (SERVICE ONLY).
    SUPERSEEDED BY 38416
    ** SETTINGS FOR NEW NOZZLE OR WHEN A NEW PRESSURE
    ADJUSTING SPRING IS USED.
    ITEM PART QTY
    NO. NO. REQ. DESCRIPTION
    1 33002 1 SEAT, spring
    2 28910 1 SPRING, pressure adjusting
    3 28921 1 SCREW, pressure adjusting
    4 30683 * 1 LOCKNUT, pressure screw
    5 30610 1 SCREW, lift adjusting
    6 24186 * 1 LOCKNUT, lift screw
    7 28923 2 SEAL, o-ring
    8 34687 1 CONNECTOR, leak-off
    9 33581 * 1 CAP, spring chamber
    10 16389 1 SEAL, combustion
    11 26990 1 WASHER, plain
    12 34688 1 PLATE, injector locating

    FOR ENGINEERING USE ONLY

    DATE ECN NO. EDITION


    09-12-00 25616 1
    02-24-03 28101 2
    03-09-06 29362 3

    © STANADYNE Corporation, all rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any
    form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher.

    You might also like