Nothing Special   »   [go: up one dir, main page]

E-Mobility - Electrical - EcoFlex HPC - Solution - Sheet

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

SOLUTION SHEET

E-mobility high-power enclosure


EcoFlex with integrated low voltage distribution and
high-power charging with optional charge posts

Standard connection interfaces between power


modules, chargers, and grid for easy start up
and expansion

Reduces site activities and safety related risks

Plug-and-play solution offers simple and quick


installation


The e-mobility EcoFlex HPC is a housing that can Technical data
E-mobility EcoFlex
accommodate four to eight 175kW high-power 8 power 4 power
HPC enclosure with charging cabinets and up to two withdrawable modules modules and
integrated high-
charging posts together with a low voltage (LV) 2 charging
power chargers and
distribution board in a plug-and-play solution. posts
low-voltage
distribution board LV level 400-480V 400-480V
As a variant, it can accommodate up to eight high-
Number of power 8 4
power charging cabinets when charging posts are on cabinets
site. The low voltage distribution board comprises a Number of charge NA 2
main incoming breaker for grid connection, a battery posts
energy storage (BESS) feeder and the electric vehicle Total maximum 1400kW 700kW
site solution (EVSS) which provides advanced charging charging power
functionalities. The ease of installation drastically Protection degree IP54 IP54
reduces the site activities in terms of manhours, LV compartment
excavation and civil works activities. The EcoFlex Nominal current in 3200A 2500A
enclosure not only protects the high-power chargers LV busbars
Nominal current 2500A 1600A
from vandalism, it can also be easily relocated. The
main breaker
solution is prewired and tested at factory.
(grid side)
BESS feeder 500kW 500kW
Solution features maximum power
- Easy to install; plug-and-play with charging posts Outgoing 400A NH3 fuse 400A NH3 fuse
on a sliding mechanism protection
- Integrated low voltage distribution panel for (charging cabinets)
charger protection and control and BESS
connection, as required Equipment description
- Integrated EVSS control panel and an optional The enclosure houses the high-power cabinets and
BESS connection (2 variants) charging posts as well as the LV distribution board.
- Easy to relocate; all power modules and charge
posts are mounted on heavy duty shock absorbers
- Lockable enclosure prevents unauthorized entry
- No direct sun radiation to the power modules
Optional equipment Installation
- Lighting devices - LV network connection needed at site
- Remote monitoring and control - Reduced site works
- Molded case circuit breakers as outgoing feeders - Compact design for reduced footprint

Single line diagram for:


2 x 350kW or 2 x 175kW 4 x 350kW or 8 x 175kW

LV LV

BESS (optional) BESS (optional)

E-mobility EcoFlex HPC enclosure with integrated


E-mobility EcoFlex HPC enclosure with high-power chargers and LV distribution panel.
integrated high-power chargers, charge (Charger posts installed externally.)
posts and LV distribution panel.

Internal view: EcoFlex HPC enclosure with charge posts integrated


ABB Ltd. —
We reserve all rights in this document and in
We reserve the right to make technical
1VPD110001A0554REV.A AUG 2020

changes or modify the contents of this doc- the subject matter and illustrations
ument without prior notice. With regard to contained therein. Any reproduction,
purchase orders, the agreed particulars shall disclosure to third parties or utilization of its
prevail. ABB AG does not accept any contents in whole or in parts is forbidden
responsibility whatsoever for potential without prior written consent of ABB AG.
errors or possible lack of information in this
document. Copyright© 2020 ABB
All rights reserved

www.abb.com/mediumvoltage/

You might also like