Fixturing For OGP Systems: Vision System Fixturing, Made Simple
Fixturing For OGP Systems: Vision System Fixturing, Made Simple
Fixturing For OGP Systems: Vision System Fixturing, Made Simple
Specifically designed features on our QLCs and acrylic base plates allow for increased speed and accuracy when exchanging
plates and set-ups on your machine:
• Mounting holes on the QLC allow users to attach the QLC to the vision stage, ensuring a secure and stable position.
• Magnets on the QLC frame and pins in our acrylic base plates means that the two lock into the same position every time.
Hold virtually anything Cut inspection time Made for easy viewing
Renishaw has a wide selection Keep your parts set-up on multiple Serrations are present on the
of modular metrology fixturing plates, switching on and off the edges of the QLC. Parts can
components, designed to hold machine within seconds. This be easily inspected and viewed
even the smallest of parts, minimises down time waiting when mounted directly against
allowing for maximum visibility for fixturing to be set up. Both these serrations using Renishaw
and probe access without modular and custom plates can be fixture clamping components,
obscuring any critical features. used on the QLC, for even greater which allow complete access
flexibility. around your part.
1 QuickLoad corner
To determine the correct QLC frame to suit your machine, simply identify your
machine model below.
Be mindful of your probe rack, rotary and artifacts that may limit the
potential plate size used on your machine.
*The letter R at the end of a vision part number indicates that the QLC is designed for use with a lower right mounting.
N.B. Please contact your local sales representative if you do not see your machine listed or if you need to discuss requirements for a lower right
mounting QLC and plate set-up.
2 Plate options
Parts can be placed directly on the acrylic multi-window or Quick slide plates attach to the QLC giving you the ability to
multi-hole base plate and are held securely using Renishaw’s secure your parts on or between the slide plates using various
modular fixturing components, ensuring repeatability and Renishaw fixturing components.
reproducibility.
Be mindful of your probe rack, rotary and artifacts that may limit the potential plate size used on your machine.
250 mm × 150 mm acrylic base plate: 250 mm × 150 mm acrylic base plate: Quick slide plates:
R-PV-W-13250150-10-4 R-PV-13250150-10-4 R-PSQ-2042-4 and R-PSQ-3272-4
*The letter R at the end of a vision part number indicates that the plate is designed for use with a lower right mounting QLC.
Part number Description Windows
M4 multi-window plates
R-PV-W-13150150-10-4 Multi-window acrylic plate 13 mm × 150 mm × 150 mm 4
R-PV-W-13250150-10-4 Multi-window acrylic plate 13 mm × 250 mm × 150 mm 3
R-PV-W-13200200-10-4 Multi-window acrylic plate 13 mm × 200 mm × 200 mm 5
R-PV-W-13250250-10-4 Multi-window acrylic plate 13 mm × 250 mm × 250 mm 5
R-PVW-13300200-10-4 Multi-window acrylic plate 13 mm × 300 mm × 200 mm 3
R-PVW-13300300-10-4 Multi-window acrylic plate 13 mm × 300 mm × 300 mm 8
R-PV-W-13400400-10-4 Multi-window acrylic plate 13 mm × 400 mm × 400 mm 7
M4 multi-window plates (for lower right mounting QLCs)
R-PVW-13250150-10-4R* Multi-window acrylic plate 13 mm × 250 mm × 150 mm 3
R-PVW-13200200-10-4R* Multi-window acrylic plate 13 mm × 200 mm × 200 mm 5
R-PVW-13250250-10-4R* Multi-window acrylic plate 13 mm × 250 mm × 250 mm 5
R-PVW-13300200-10-4R* Multi-window acrylic plate 13 mm × 300 mm × 200 mm 3
M6 multi-hole plates
R-PV-13150150-12-6 Multi-hole acrylic plate 13 mm × 150 mm × 150 mm -
R-PV-13250250-12-6 Multi-hole acrylic plate 13 mm × 250 mm × 250 mm -
M6 multi-window plates
R-PV-W-13250150-12-6 Multi-window acrylic plate 13 mm × 150 mm × 150 mm 3
R-PV-W-13250250-12-6 Multi-window acrylic plate 13 mm × 250 mm × 250 mm 5
R-PV-W-13400400-12-6 Multi-window acrylic plate 13 mm × 400 mm × 400 mm 7
1/4-20 multi-hole plates
R-PV-5066-50-20 Multi-hole acrylic plate 0.50 in × 6 in × 6 in -
R-PV-501010-50-20 Multi-hole acrylic plate 0.50 in × 10 in × 10 in -
R-PV-50128-50-20 Multi-hole acrylic plate 0.50 in × 12 in × 8 in -
R-PV-501616-50-20 Multi-hole acrylic plate 0.50 in × 16 in × 16 in -
1/4-20 multi-hole plates (for lower right mounting QLCs)
R-PV-501010-50-20R* Multi-hole acrylic plate 0.50 in × 10 in × 10 in -
R-PV-501212-50-20R* Multi-hole acrylic plate 0.50 in × 12 in × 12 in -
1/4-20 multi-window plates
R-PV-W-50106-50-20 Multi-window acrylic plate 0.50 in × 10 in × 6 in 4
R-PV-W-501010-50-20 Multi-window acrylic plate 0.50 in × 10 in × 10 in 5
R-PVW-50128-50-20 Multi-window acrylic plate 0.50 in × 12 in × 8 in 4
R-PV-W-501616-50-20 Multi-window acrylic plate 0.50 in × 16 in × 16 in 7
1/4-20 multi-window plates (for lower right mounting QLCs)
R-PVW-501010-50-20R* Multi-window acrylic plate 0.50 in × 10 in × 10 in 5
R-PVW-501212-50-20R* Multi-window acrylic plate 0.50 in × 12 in × 12 in 6
*The letter R at end of a vision part number indicates that the plate is designed for use with a lower right mounting QLC.
3 Component sets
There are several M4, M6 and 1/4-20 component sets for fixturing your parts on
the base plate.
M4 component sets
Set A (part no. Set B (part no.
Part number Description
R-FSV-A-4) R-FSV-B-4)
R-S-65-4* 6 mm dia. × 5 mm standoff - 3
R-S-610-4* 6 mm dia. × 10 mm standoff 3 6
R-S-625-4* 6 mm dia. × 25 mm standoff 3 6
R-S-95-4* 9 mm dia. × 5 mm standoff 3 3
R-S-910-4 9 mm dia. × 10 mm standoff 3 6
R-S-920-4 9 mm dia. × 20 mm standoff 3 6
R-S-925-4 9 mm dia. × 25 mm standoff 3 6
R-S-1210-4 12 mm dia. × 10 mm standoff 3 6
R-S-1225-4 12 mm dia. × 25 mm standoff 3 6
R-SP-610-4 6 mm dia. × 10 mm pin standoff 2 4
R-SP-910-4 9 mm dia. × 10 mm pin standoff 2 4
R-CTT-40-25-4 40 mm tension clamp with coated soft tip with 25 mm post 2 4
R-CWT-25-25-4 25 mm wire clamp with coated soft tip with 25 mm post 2 4
R-CWT-50-50-4 50 mm wire clamp with coated soft tip with 50 mm post 2 4
R-CP-4 Pusher clamp 1 1
R-CVM-B-4 Micro vice clamp with base 1 1
R-CSPS-1210-4 Spring pusher standoff clamp 1 1
R-RPA-4 Aluminium resting pin 4 4
R-VC-5050-4 50 mm × 50 mm corner viewer 1 1
R-CVM-4 Micro vice clamp with base - -
R-CMC-4 Micro centre, 6 mm dia. centre pins - -
R-M-13-4 13 mm dia. × 25 mm magnet - -
R-NTM-1 Magnetic mini square V-block - -
R-AVM-4 Adjustable micro V - -
R-VMB-20510 Micro V-block (sold in pairs) - -
R-AJ-9-4 9 mm dia. adjustable jackstand 1 2
R-AS-30-4 30 mm long adjustable slide 1 2
R-ASA-45-4 45 mm long adjustable acrylic slide base 1 2
R-TB-1619-4 Tower block with base 16 mm² × 19 mm 1 1
R-TC-300190-4 300 mm × 190 mm × 25 mm component tray 1 1
R-BC10 50 mm × 200 mm × 150 mm compartment box (not shown) 1 1
Total number of components in each set 48 85
To discuss metrology fixturing for your vision machine, please contact your
local sales representative or visit www.renishaw.com/contact
Renishaw plc T +44 (0) 1453 524524
F +44 (0) 1453 524901
New Mills, Wotton-under-Edge
E uk@renishaw.com
Gloucestershire, GL12 8JR
United Kingdom www.renishaw.com
Ask your local sales representative about your custom fixturing solution today or visit
www.renishaw.com/customfixture
RENISHAW HAS MADE CONSIDERABLE EFFORTS TO ENSURE THE CONTENT OF THIS DOCUMENT IS CORRECT AT THE DATE OF
*H-1000-9851-01*
PUBLICATION BUT MAKES NO WARRANTIES OR REPRESENTATIONS REGARDING THE CONTENT. RENISHAW EXCLUDES LIABILITY,
HOWSOEVER ARISING, FOR ANY INACCURACIES IN THIS DOCUMENT.