Firex
Firex
Firex
Pre-painted
Fire Sprinkler Pipe
A member of the Southern Steel Group of companies, a leading steel mill in the region. SOUTHERN PIPE INDUSTRY (M) SDN
BHD was established in 1967 as a joint-venture between Malaysia and Japan. Southern Steel Pipe Sdn Bhd was formed as a
100% owned subsidiary to cater to the export market.
The pipe group consists of two steel pipe factories in Malaysia with a combine annual sales revenues of over USD 100 million
and an annual capacity that exceeds 200,000 MT.
The many certificates garnered through the years are testament to the companies steadfast commitment in providing only the
best products and services. Among others, it has the distinction of being the first steel mill in the country to be awarded the ISO
9001:2000 certification. The group’s product lines were being exported to countries all over the world.
Firex is manufactured and tested to comply with the requirements of the following specifications.
• AS 1074
• ASTM A 53
• BS 1387: 1985
• JIS G 3452: 1988
We also welcome inquiries concerning additional sizes special orders to meet your product needs. Please contact us (phone:
604-331 7393/331 7741 or fax: 604-331 0942) for further information.
Specially Design for
Fire Protection Industry
100% leak tightness tested/Water Pressure tested
The Fire Protection Pipe
Firex is a pre-painted fire sprinkler pipe. It is specifically design and develop with the fire protection professionals for the fire
protection professionals.
USER’S BENEFITS
LEAK PROOF QUALITY FINISHING
Firex is 100% leak tightness tested on top Full and consistently high quality alkyd
of normal eddy current test, provide you base painting in factory operated in line
with double assurance on leak proof and
no more worry with Firex. automatic painting line.
SUPPLY CONDITIONS
Length
: Standard Length is 6 meter
: Cut-to-length is available upon request
End Finish
: Plain End
TECHNICAL SPECIFICATIONS
Tolerances
PERMISSIBLE VARIATION
Wall Thickness : -12.5%, +not specified
SUPPLY CONDITIONS
Identification marking
: Medium tubes are marked by blue colour band
: Heavy tubes are marked by red colour band
Length
: Standard Length is 6 meter
: Cut-to-length is available upon request
End Finish
: Plain End
TECHNICAL SPECIFICATIONS
Tolerances
PERMISSIBLE VARIATION
Wall Thickness : - 10% , + not specified (Medium & Heavy Tubes)
Weight : The mean consigment weight for quantities of 150m (500ft) and over of one size :
± 4% of the standard weight.
The mean consignment weight for any single tube: +10%, -8% of the standard weight.
Length : - 0mm, + 30mm
SUPPLY CONDITIONS
Length
: Standard Length is 6 meter
: Cut-to-length is available upon request
End Finish
: Plain End
TECHNICAL SPECIFICATIONS
Tolerances
PERMISSIBLE VARIATION
Wall Thickness : - 12.5%, + not specified
Weight : ± 10%
Outside Diameter : ± inch,<NPS2
1
64 or ± 0.40mm,<NPS 2
: ± 1%,>NPS 2
Length : - 0mm, + 30mm
Mechanical Properties
TENSILE STRENGTH YIELD STRENGTH
N/mm2 N/mm2
330 (min) 205 (min)
Chemical Composition
C Mn P S Cu Ni Cr Mo V
Max (%) Max (%) Max (%) Max (%) Max (%) Max (%) Max (%) Max (%) Max (%)
0.25 0.95 0.05 0.045 0.40 0.40 0.40 0.15 0.08
Qutstanding in
Quality and Performance
As technological development sweeps rapidly the industries
we service, it is critical that our steel products meet the
highest demands of quality and performance. Southern Pipe
employs advanced technology for manufacturing of quality
pipes, all of which conform to stringent quality assurance
standards. Our efforts in this direction were recognized in
early 1982 when we earned the Certificate of Excellence by
SIRIM.
www.spim.com.my
www.southsteel.com
Manufacturer
SOUTHERN PIPE INDUSTRY (M) SDN BHD