Nothing Special   »   [go: up one dir, main page]

Altai C1N Super Wifi Cpe/Ap: 802.11N Bandwidth Control and Remote Management Capable

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Altai C1n Super WiFi CPE/AP

802.11n Bandwidth Control and Remote Management Capable

Altai C1n Super WiFi CPE/AP Control Traffic Throughput Flexibly

The Altai C1n WiFi CPE/AP is designed as an From day one, the C1n is designed and purpose-
essential component in the Altai Super WiFi system built for service operators. Its built-in traffic
to extend outdoor Wi-Fi coverage into indoor areas shaping based bandwidth control mechanism
for broadband connectivity or use as an AP for allows the control of uplink and downlink traffic
pico coverage. throughput on a per-client or per-VAP basis. A
full set of networking and management features
are available to meet carriers’ requirements.

Altai C1n for Wireless Broadband

The Altai C1n employs patented smart signal The C1n is a key component in wireless
processing algorithms and antenna design to broadband access provisioning. It can be
increase Wi-Fi signal strength (transmit and receive) installed outdoor by the side of a window,
by as much as 16 dB in areas covered by an A8n mounted to a wall, at the rooftop of a building or
Super WiFi Base Station or A2 WiFi Access Point. It placed at the desktop inside for fixed
can be installed exactly where the throughput is broadband access provisioning.
required to boost up, and it allows the service
operator to increase the coverage range of an Altai C1n for Access Point
A8n base station substantially and provides greater
flexibility and cost savings to Wi-Fi deployments. The C1n can also be used as a standalone Wi-Fi
access point for smaller networks supporting
Super Long Range Coverage 802.11b/g/n clients. With its high gain built-in
smart antenna, it is an important solution to
Max. LOS Access 800 m complement the large coverage and high
4 km to A8-Ein(ac) throughput of an A8n series Super WiFi Base
Max. LOS CPE
3 km to A3-Ei Station and A2 Access Point to improve Wi-Fi
Max. Data Rate 300 Mbps performance.

As an integral part of our Super WiFi network infrastructure, the Altai C1n differentiates others with:
 Features built-in for carriers including per  One-piece weatherproof chassis compliant to
client/VAP based bandwidth control, remote IP55 standard for direct outdoor installation
web-based management and client
association status  8-level LED for easy alignment in the strongest
signal direction
 ±45°dual slant patch antennas are optimized
to match with the Altai A8n/A2 series  Increase signal strength for both NLOS and LOS
antennas. It provides 3 dB more gain as coverage areas
compared to other V/H polarized CPEs  Improve data transmission rate and throughput
 High performance antenna with 20 dB front-to- utilization of base station
back ratio, which is on average 5 dB better
than others in directional transmission without
picking up unwanted signal

Altai Technologies Ltd. All rights reserved


Altai C1n Super WiFi CPE/AP
802.11n Bandwidth Control and Remote Management Capable

Wireless Interface Physical Specifications

802.11b/g/n (2x2) Radio • Dimension 242 x 80 x 27 mm


• Operating Mode AP/ CPE/Repeater (Without Mounting Kit)
• Standard IEEE 802.11b/g/n • Weight 0.4 kg
• Operating Frequency 2.400 – 2.485 GHz (Ch 1-13) • Mounting Desktop, Pole, Wall or
• Transmit Power 29 dBm (Max.) Window-Mounted
26 dBm (Per Chain) • Network Interface 10/100 Mbps Ethernet Port
• Receiver Sensitivity (Typical) • LED Display Main Power Status
802.11b 11 Mbps -91 dBm Ethernet Status
1 Mbps -96 dBm 8-Level Signal Strength
802.11g 54 Mbps -81 dBm (User Configurable)
6 Mbps -95 dBm Power Supply
802.11n HT20 -95 dBm
HT40 -92 dBm • Power Supply 18V Passive PoE PD or 802.3af
PoE PD via Adapter
• 16SSID • Power Consumption 6 W (Typical)/8 W (Max.)
• WMM, 802.11h, 802.11k, 802.11r, 802.11v, 802.11w
• Passpoint (Release 2) Environmental Specifications
• Fast Roaming
• Auto Channel Selection and TX Power Control • Operating Temperature -20 °C to +55 °C
• Bandwidth Control Per SSID/Client • Storage Temperature -40 °C to +80 °C
• Altai AirFi™ Throughput Optimization • Humidity Up to 95% (Non-Condensing)
• Wind Loading Up to 200 km/h (124 mph)
Antennas • Weatherproof Outdoor UV Stabilized Plastic
IP55 Compliant
 Built-in 2.4 GHz Antenna 10 dBi Dual Slant ±45°Sector
 Horizontal Beamwidth 70°(-3 dB) Antenna Pattern (Built-in Antennas)
 Vertical Beamwidth 30°(-3 dB) -45°
 Front-to-back Ratio -20 dB (Max.)

Networking

• Switch (Bridge) and Gateway Mode


• IPv4/IPv6 Dual-Stack
• NAT
• DHCP Client/Server
• PPPoE Client +45°
• Soft-GRE
• VLAN
• Multicast Rate Filter/IGMP Snooping

Security

• Authentication – Open, Shared key, WPA/WPA-PSK, WPA2/


WPA2-PSK, WPA3*, 802.1x (EAP-PEAP/TLS/TTLS/SIM/AKA)
• Encryption – WEP, TKIP, AES
• Inter/Intra-SSID Client Isolation
• MAC-based Access Control (White/Black List) Certifications
• RADIUS/Active directory
• Dynamic VLAN Assignment • FCC/CE/Others*
• Firewall • RoHS Compliance
• WIDS/WIPS
• Broadcast/Multicast/Unicast Flooding Control
Product Ordering Information
Management
C1n (Part No.: SD.C1-N000-UK/US/EU)
• Management Platforms: AltaiGate, AltaiCare, AtlaiCare Standard Package
Appliance  C1n Super WiFi CPE/AP with Built-in 2.4 GHz Patch Antennas
• Web User Interface (Model No.: WA1011N-G)
• Command Line Interface (SSH)  DC Injector and AC Adapter (UK, US, or EU)
• Remote Factory Reset  Cable Ties
• Trusted Management IP List Optional Accessories
• SNMP v1/v2c/v3  802.3af to Passive PoE Adapter
• MIB2/IF-MIB/Altai Enterprise MIB
Contact Us
• Syslog • Email: sales@altaitechnologies.com
• Spectral Analysis*
• KPI Monitoring* C1n-PB-191213
• Client OS and Hostname Detection
*Will be available in the future.
The coverage range will vary depending on NLOS and interference conditions
The transmit power may vary according to country regulation

Altai Technologies Ltd. All rights reserved

You might also like