Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 38 views

    Technical Notification: H4122 - Iridium SSAS Box

    Uploaded by

    Parul Mehta

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Technical Notification: H4122 - Iridium SSAS Box

    Uploaded by

    Parul Mehta
    38 views2 pages

    Original Title

    22E3ECEBCCAF4F299E07D6D0C400FC3E

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    38 views2 pages

    Technical Notification: H4122 - Iridium SSAS Box

    Uploaded by

    Parul Mehta

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Technical Notification

    Date: January 2006 Document no.: 95-122948


    Page 1/2

    H4122 - Iridium SSAS Box

    Subject:

    Re-programming of configuration parameters.

    Identification:

    In the event of having to change the configuring parameters stored in the Iridium SSAS
    Box, e.g. for a vessel flag change, the typical method to apply will be that of performing an
    initial factory reset prior to programming the new configuration parameters (refer to
    “Troubleshooting” section page 15 in the H4122 Operation/Installation Manual for Factory
    Reset procedure).
    Having performed such factory reset some of the data fields, e.g. the <message>, <alarm
    email 1 & 2>, <test email 1 & 2> or <ITS email> may or may not be automatically filled with
    the symbol <ÿ>.
    If, in the further re-programming process simply erasing this symbol from the data field by
    backspacing or overwriting the symbols, there is a small risc that the new entered data are
    not stored properly in the SSAS unit memory, subsequently resulting in a test and/or alert
    message not being delivered correctly or a test and/or alert message not included correctly
    in the applicable transmissions.
    To avoid this happening the initial factory reset procedure should be followed by once
    again cycling the power to the SSAS Box, whereby ensuring that the SSAS unit memory is
    set to factory default status.
    In applying this procedure the subsequent programming of configuration parameters will
    be stored correctly in the SSAS unit memory.
    Document no.: 95-122948
    Page 2/2

    Priority:

    LOW: For information purposes only – no specific action required except as described
    above!

    Action:

    No specific action required.

    This bulletin is issued for information purposes only.

    Thrane & Thrane


    After Sales Service

    Information in this document is subject to change without notice


    and does not represent a commitment on the part of Thrane & Thrane A/S.
    © 2005 Thrane & Thrane A/S. All rights reserved.
    Printed in Denmark.

    Technical Notification XXXXX Page 2/2

    You might also like