Spicer Drive Axle Parts List d170 d190 s170 s190 s590
Spicer Drive Axle Parts List d170 d190 s170 s190 s590
Spicer Drive Axle Parts List d170 d190 s170 s190 s590
Chart-N
New Axle Housings w/ New Brg Cups and Snap Ring Groove Location Change:
Use kit 504060 when replacing the bearing parts from new build configurations or when ordering any of the new design axle housings with
the relocated snap ring groove. New design housings are made AFTER October 24th 2011. Refer to the D170 Axle Housing Replacement Chart
on pages 38-39.
Output Shaft Bearing Kit: 504060
Qty Per
Item Description Axle Part-No. Notes
1 Snap Ring .109” 1 134322 New Design Dim: .109” x 4.22”
2/3 Bearing Cup 2 139980 Cup ID# NP910345
4 Bearing Cone 2 131211 Cone ID# NP197868
Chart-O
Original Design Axle Housings w/ Original Brg Cup and Original Snap Ring Groove Location:
Use kit 513877 when replacing the bearing parts from any original design axle housing or bolt on cover. Original production housings and
covers made from 2003 thru June 2010.
Output Shaft Bearing Kit: 513877
Qty Per
Item Description Axle Part-No. Notes
1 Snap Ring 1 78937 Original Design Dim: .093” x 4.14”
2/3 Bearing Cup 2 131212 Cup ID# NP802507
4 Bearing Cone 2 131211 Cone ID# NP197868
Chart-I
Interim Build Configuration – Original Axle Housing w/ Repositioned Snap Ring Groove and use of a Axle Housing Spacer:
The 504054 kit shown below was released and used when replacing the bearing parts from axles built with parts used on an interim basis.
From June 2010 thru Oct 24th 2011 axle assemblies used a bearing spacer in addition to the bearing cup combination of 139980/131212.
The snap ring groove location change was introduced but required the use of the spacer too. Check individual component identification or
confirm vehicle build or serial number information if available. This kit contains a replacement output nut and oil seal.
NOTE: The new 504060 kit can be used as an alternate replacement for the 504054 parts kit, but the housing spacer 139979, inner bearing
cup 131212 and original snap ring 078937 MUST NOT be used. Use only the parts supplied in the 504060 kit.
Output Shaft Bearing Kit: 504054 6
Qty Per 7
Item Description Axle Part-No. Notes 1
1 Snap Ring 1 78937 Dim: .093” x 4.14” 3
4
2 Bearing Cup 1 131212 Inner Cup ID# NP802507 5
3 Bearing Cup 1 139980 Outer Cup ID# NP910345 4
2
4 Bearing Cone 2 131211 Cone ID# NP197868
5 Housing Spacer 1 139979 Interim Housing Spacer
6 Output Nut 1 128049 Output Nut
7 Oil Seal 1 210737 Thru-Shaft Seal
37