Datasheet - Live: Unisonic Technologies Co., LTD
Datasheet - Live: Unisonic Technologies Co., LTD
Datasheet - Live: Unisonic Technologies Co., LTD
, LTD
UZ1086 LINEAR INTEGRATED CIRCUIT
DESCRIPTION
The UTC UZ1086 and UZ1086-1.8V, 2.5V, 2.85V, 3.3V and 5V
are low dropout three-terminal regulators with 1.5A output current
capability. These devices have been optimized for low voltage where
transient response and minimum input voltage are critical. The 2.85V
version is designed specifically to be used in Active Terminators for
SCSI bus.
Current limit is trimmed to ensure specified output current and
controlled short-circuit current. On-chip thermal limiting provides
protection against any combination of overload and ambient
temperatures that would create excessive junction temperatures.
Unlike PNP type regulators where up to 10% of the output
current is wasted as quiescent current, the quiescent current of the
UZ1086 flows into the load, increasing efficiency.
Datasheet.Live
FEATURES
*Low dropout voltage
*Load regulation: 0.05% typical
*Trimmed current limit
*On-chip thermal limiting
*Three-terminal adjustable or fixed 1.8V, 2.5V, 2.85V, 3.3V, 5V
Lead-free: UZ1086L-xx
Halogen-free: UZ1086G-xx
ORDERING INFORMATION
Ordering Number Pin Assignment
Package Packing
Normal Lead Free Halogen-Free 1 2 3
UZ1086-xx-AA3-R UZ1086L-xx-AA3-R UZ1086G-xx-AA3-R SOT-223 A/G O I Tape Reel
UZ1086-xx-TA3-T UZ1086L-xx-TA3-T UZ1086G-xx-TA3-T TO-220 A/G O I Tube
UZ1086-xx-TN3-R UZ1086L-xx-TN3-R UZ1086G-xx-TN3-R TO-252 A/G O I Tape Reel
UZ1086-xx-TQ2-R UZ1086L-xx-TQ2-R UZ1086G-xx-TQ2-R TO-263 A/G O I Tape Reel
UZ1086-xx-TQ2-T UZ1086L-xx-TQ2-T UZ1086G-xx-TQ2-T TO-263 A/G O I Tube
UZ1086-xx-TQ3-R UZ1086L-xx-TQ3-R UZ1086G-xx-TQ3-R TO-263-3 A/G O I Tape Reel
UZ1086-xx-TQ3-T UZ1086L-xx-TQ3-T UZ1086G-xx-TQ3-T TO-263-3 A/G O I Tube
Note: 1. xx: Output Voltage, refer to Marking Information.
2. A: ADJ (for adjustable regulator), G: GND (for fixed regulator)
www.unisonic.com.tw 1 of 6
Copyright © 2009 Unisonic Technologies Co., Ltd QW-R102-008,J
UZ1086 LINEAR INTEGRATED CIRCUIT
MARKING INFORMATION
PACKAGE VOLTAGE CODE MARKING
TO-220 UTC
L: Lead Free
TO-252 UZ1086
LOT Code G: Halogen Free
TO-263 18 :1.8V XX
Voltage Code Date Code
TO-263-3 25 :2.5V
2J :2.85V 1 2 3
33 :3.3V
50 :5.0V
AD :ADJ UZ1086 L: Lead Free
G: Halogen Free
SOT-223 XX
Voltage Code Date Code
1 2 3
UZ1086
VIN=3.3V VIN VOUT 1.5V at 1.5A
+ +
10 F R1 22 F
ADJ 124
VOUT=VREF(1+R2/R1)+IAdj*R2 R2
24.9
UZ1086-2.85
VIN=5V VIN VOUT 2.85V at 1.5A
+ +
10 F 22 F
GND
0
1.1
1.0
-0.05
0.9
0.8 -0.1
0.7
0.6 -
0.15
0.5
0 -0.2
0 0.3 0.6 0.9 1.2 1.5 -75 -50 -25 0 25 50 75 100 125150 175
Output Current (A) Junction Temperature(°C)
1.235
Reference Voltage(V)
3.55
1.23 3.5
1.225 3.45
1.22 3.4
1.215 3.35
1.21 3.3 VOUT =3.3V
1.205 3.25
UZ1086 adjustable Only
1.2 3.2
-75 -50 -25 0 25 50 75 100 125150 175 -75 -50 -25 0 25 50 75 100 125150 175
Junction Temperature(°C) Junction Temperature(°C)
Figure 5.Minimum Load Current vs.Temperature Figure 6.Adjust Pin Current vs.Temperature
5 100
90 Note1.UZ1086 Only
4 80
Minimum Load Current (mA)
70
3 60
50
2 40
30
1 20
10
0 0
-75 -50 -25 0 25 50 75 100 125 150 175 -75 -50 -25 0 25 50 75 100 125150 175
Junction Temperature(°C) Junction Temperature(°C)
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.