Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 192 views

    TGH 400 Data Sheet

    Uploaded by

    Miriam Salazar
    This document provides specifications for a TGH Triplex well servicing pump that is 400 horsepower with an 8-inch stroke, intended for intermittent service. Key details include: it uses either piston and liner or plunger and packing construction; has hardened forged steel dual stem guided valves; a three piece block steel fluid cylinder; and external gear reduction. Performance ratings are provided for pump RPM and GPM or PSI output based on piston/plunger diameter. Standard and optional equipment are also listed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    TGH 400 Data Sheet

    Uploaded by

    Miriam Salazar
    192 views2 pages
    This document provides specifications for a TGH Triplex well servicing pump that is 400 horsepower with an 8-inch stroke, intended for intermittent service. Key details include: it uses either piston and liner or plunger and packing construction; has hardened forged steel dual stem guided valves; a three piece block steel fluid cylinder; and external gear reduction. Performance ratings are provided for pump RPM and GPM or PSI output based on piston/plunger diameter. Standard and optional equipment are also listed.

    Original Description:

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for a TGH Triplex well servicing pump that is 400 horsepower with an 8-inch stroke, intended for intermittent service. Key details include: it uses either piston and liner or plunger and packing construction; has hardened forged steel dual stem guided valves; a three piece block steel fluid cylinder; and external gear reduction. Performance ratings are provided for pump RPM and GPM or PSI output based on piston/plunger diameter. Standard and optional equipment are also listed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    192 views2 pages

    TGH 400 Data Sheet

    Uploaded by

    Miriam Salazar
    This document provides specifications for a TGH Triplex well servicing pump that is 400 horsepower with an 8-inch stroke, intended for intermittent service. Key details include: it uses either piston and liner or plunger and packing construction; has hardened forged steel dual stem guided valves; a three piece block steel fluid cylinder; and external gear reduction. Performance ratings are provided for pump RPM and GPM or PSI output based on piston/plunger diameter. Standard and optional equipment are also listed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Bulletin 4-202

    Version 2

    TGH TRIPLEX WELL SERVICING PUMP


    400 HP, 8” STROKE
    For Intermittent Service

    WELL SERVICING
    GARDNER DENVER TGH HEAVY-DUTY WELL
    SERVICING pumps are built for outstanding
    performance in a rugged environment.

    • Eccentric construction.
    • Bolted type stuffing boxes.
    • Right or left-hand drive extension.
    • Nonadjustable type packing.
    • Pressure lubrication of power end.
    • Suction and discharge on either side.
    • Clamp connections between plungers and push
    rods. • Total gear ratio: 10.15 to 1

    PERFORMANCE RATINGS – Intermittent Service**

    Piston* Diameter Plunger or Piston* Diameter


    Pump Input 5 IN 172 MM 4 ½ IN 114 MM 4 IN 102 MM
    RPM RPM GPM PSI LPM KG/CM2 GPM PSI LPM KG/CM2 GPM PSI LPM KG/CM2
    175 1776 357.0 1632 1351 114.7 289.2 2015 1095 141.7 228.5 2551 865 197.4
    150 1522 306 1904 1158 133.9 247.8 2351 938 165.3 195.8 2976 741 209.2
    125 1268 255 2285 965 160.7 206.5 2822 782 198.4 163.2 3571 618 251.1
    100 1015 204 2857 772 200.9 165.2 3527 625 248.0 130.6 4464 494 313.9
    75 761 153 3809 579 267.8 123.9 4703 469 330.7 97.9 5952 371 418.5
    50 507 102 4000 386 281.2 82.6 7054 313 496.0 65.3 8928 247 627.7
    34 345 69.4 4000 263 281.2 56.2 10000 213 703.1 44.4 10000 168 703.1
    Displacement per
    2.040 GAL 7.722 LIT 1.652 GAL 6.254 LIT 1.306 GAL 3.922 LIT
    Revolution
    Based on 85% mechanical efficiency and 100% volumetric efficiency. *Piston and liner construction available in 2 3/4", 3", 3 1/2" and 4" only.
    ** The duty cycle of a pump rated for intermittent duty is not to exceed 30 minutes at loads above the maximum established for continuous running
    followed by an equal period at no load.

    Note: Use plungers/packing for acid service or pressures in excess of 4,000 PSI. Pistons/liners are not recommended for these applications.

    Head Office: EXIT PRINT NEXT


    (9$2!5,)#05-0).'s352&!#%05-0).'s35#+%22/$05-03s35#+%22/$3s05-0).'5.)43
    6120 Davies Road Edmonton, AB T6E 4M9 PH: (780) 485-2010 Fax: (780) 485-1938
    $)%3%,.!452!,'!3%.').%3!.$'%.%2!4/23
    Drayton Valley - Calgary - Lloydminster
    TGH TRIPLEX WELL SERVICING PUMP
    For Intermittent Service – 8” Stroke – 400 HP

    STANDARD EQUIPMENT OPTIONAL EQUIPMENT


    • Colmonoy plungers and packing or piston and liner • Mechanical lubricator for plunger stuffing box packing.
    construction. • Suction and discharge surge chambers.
    • Hardened forged steel dual stem guided valves with • Relief valve.
    urethane inserts. • Fabricated steel skid and motor or engine.
    • Three piece block steel fluid cylinders. • Rod washing system (mounted only on unitized packages).
    • Fabricated suction and discharge openings. • Fabricated suction manifold.
    • Lubricating oil pump and filter. • Hardened steel plungers.
    • External gear reduction.
    Crankcase Oil Capacity: 30 gallons (114 liters).
    • Auxiliary crosshead lubrication system. Suction Opening: 6” (152 mm) 150# welding flange.
    • Grease fitting for plunger packing lubrication system. Discharge Connection: 2 9/16” (66 mm) API 10,000# PSI
    • Cast iron suction manifold. beveled for welding either side.
    • Companion flanges on suction discharge. Length: 93.2” (1230 mm) Height: 51.5” (1310 mm)
    • Water to oil heat exchanger. Weight: Dry, less optional skid: 9,360 lbs (4,246 kg).

    For additional information contact your local representative or


    Gardner Denver Compressor and Pump Division,
    1800 Gardner Expressway, Quincy, Illinois 62301
    Customer Service Department
    Telephone: (800) 682-9868 FAX: (217) 224-7814
    Sales and Service in all major cities. 9/01

    Head Office: BACK EXIT PRINT


    (9$2!5,)#05-0).'s352&!#%05-0).'s35#+%22/$05-03s35#+%22/$3s05-0).'5.)43
    6120 Davies Road Edmonton, AB T6E 4M9 PH: (780) 485-2010 Fax: (780) 485-1938
    $)%3%,.!452!,'!3%.').%3!.$'%.%2!4/23
    Drayton Valley - Calgary - Lloydminster

    You might also like