Nothing Special   »   [go: up one dir, main page]

Product Information: Leichtlauf High Tech 5W-40

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Product information PI 45/14/10/2020

Leichtlauf High Tech 5W-40

Description
Modern top class low-friction engine oil for all-sea-
son use in gasoline and diesel engines without diesel
particulate filters (DPF). The combination of innovat-
ive base oils – based on synthesis technology and the
latest additive technology – guarantees an engine oil
that reduces oil and fuel consumption and that en-
sures fast lubrication of the engine. Depending on the
manufacturer instructions, oil change intervals of up
to 40,000 km are possible. Technical data
Viscosity at -30°C (CCS) ≤ 6600 mPas
Properties ASTM D5293
- optimal engine performance Viscosity index 190
- smooth engine running DIN ISO 2909
- outstanding engine cleanliness
HTHS at 150°C ≥ 3,5 mPas
- high shear stability
ASTM D5481
- saves fuel and reduces pollutant emissions
- excellent wear resistance Pour point -45 °C
- long engine service life DIN ISO 3016
- outstanding lubrication reliability Evaporation loss (Noack) 10,0 %
- optimum stability to aging CEC-L-40-A-93
- optimum oil pressure under all operating conditions
Flash point 232 °C
- instant lubrication after cold start
DIN ISO 2592
- tested for turbochargers and catalytic converters
- miscible with all commercially available motor oils Total base number 11,3 mg KOH/g
DIN ISO 3771
Specifications and approvals: Sulfate ash 1,0 - 1,6 g/100g
ACEA A3 ∙ ACEA B4 ∙ API SN ∙ BMW Longlife-01 ∙ DIN 51575
MB-Approval 229.5 ∙ Peugeot Citroen (PSA) B71 2296 Color number (ASTM) L 3,5
∙ Porsche A40 ∙ Renault RN 0700 ∙ Renault RN 0710 DIN ISO 2049
∙ VW 502 00 ∙ VW 505 00

Areas of application
LIQUI MOLY also recommends this product for
Ideally suited for modern gasoline and diesel engines
vehicles or assemblies for which the following
with multi-valve technology, turbocharger and with or
specifications or original part numbers are
without charge air cooling. Especially suitable where
required:
there are long intervals between changes and heavy
Chrysler MS-10725 ∙ Chrysler MS-10850 ∙ Fiat
duty engine requirements.
9.55535-H2 ∙ Fiat 9.55535-M2 ∙ Fiat 9.55535-N2 ∙ Fi-
at 9.55535-Z2 ∙ Opel GM-LL-B-025 ∙ Peugeot Citroen
(PSA) B71 2294 Application
The operating instructions of the vehicle and engine
manufacturers must be followed.
Technical data
SAE class (engine oils) 5W-40
Available pack sizes
SAE J300
1 l Canister plastic 2327
Density at 15 °C 0,855 g/cm³ BOOKLET
DIN 51757
1 l Canister plastic 20702
Viscosity at 40 °C 70,0 mm²/s D-GB-CN
ASTM D 7042-04
1 l Canister plastic 21237
Viscosity at 100 °C 12,9 mm²/s ALGERIEN-GB-ARAB-F
ASTM D 7042-04
1 l Canister plastic 20899
Viscosity at -35 °C (MRV) ≤ 60000 mPas JP
ASTM D4684

LIQUI MOLY GmbH Postfach 2829 Phone: +49 (0)731/1420-0 Service-hotline: 0800/8323230
Jerg-Wieland-Str. 4 89018 Ulm Fax: +49 (0)731/1420-82 Technical hotline: +49 (0)731/1420-871
89081 Ulm-Lehr Germany e-mail: info@liqui-moly.de www.liqui-moly.de
Product information PI 45/14/10/2020

Leichtlauf High Tech 5W-40

Available pack sizes


4 l Canister plastic 2595
BOOKLET
4 l Canister plastic 20964
D-GB-CN
5 l Canister plastic 2328
BOOKLET
5 l Canister plastic 20668
ALGERIEN-GB-ARAB-F
5 l Canister plastic 20992
D-GB-CN
5 l Canister plastic 20900
JP
20 l Canister plastic 3867
D-GB-I-E-P
20 l Canister plastic 20927
JP
60 l Drum sheet metal 3868
D-GB
205 l Drum sheet metal 3869
D-GB
1 l Tank truck 3070
D-GB

Our information is based on thorough research


and may be considered reliable, although not
legally binding.

LIQUI MOLY GmbH Postfach 2829 Phone: +49 (0)731/1420-0 Service-hotline: 0800/8323230
Jerg-Wieland-Str. 4 89018 Ulm Fax: +49 (0)731/1420-82 Technical hotline: +49 (0)731/1420-871
89081 Ulm-Lehr Germany e-mail: info@liqui-moly.de www.liqui-moly.de

You might also like