Shack Mounted Drill Rig VD3000
Shack Mounted Drill Rig VD3000
Shack Mounted Drill Rig VD3000
VD3000
STANDARD TECHNICAL SPECIFICATIONS
Model VD3000
Type Skid mounted, open shack, all hydraulic chuck drive core drill, specially designed for
diamond core drilling up to the rated specifications.
Diesel engine The most frequently used power units is John Deere 200HP JD6068TF250 and Cummins
QSB4.5 155HP with a normal operating speed up to 2,200 RPM (operating RPM can vary
depending on pump configuration and option chosen).
Pump drive FUNK triple pump drive (series 28000) with ratio 1.27:1
Rotation head AVD (Atelier Val D’Or inc.) type with chain drive head for hydraulic chuck (customer choice)
ratio 12/24 on “H” size head, and 12/29 on “P” size head.
Transmission FUNK 4 speed transmission (Ratio 1st 6.63:1, 2nd 3.17:1, 3rd 1.72:1. 4th 1:1)
Head table Hydraulic cylinder directly coupled to the Rotation Head table. The travel is 3m (10ft). At
4,200PSI, push capacity is 8,016 kg (17,671 lbs) and pull capacity is 13,466 kg (29,688
lbs).
Pull cylinder Hydraulic cylinder with 7,482 kg (16,493 lbs) of maximum pull at 4,200PSI.
Water pump Standard BEAN 435 or PRATISSOLI KF40 (customer choice possible)
Wireline winch Maximum capacity is 1,800m (5,905ft) for 3/16in wireline rope
Hydraulic Full flow 25 micron Beta rated return oil filtration. Water/oil, air/oil hydraulically motorized
(optional) and air/oil (optional, installed on the diesel engine) hydraulic coolers.
Maximum pull capacity 20,948 kg (46,181 lbs) @ 4,200 PSI with feed and pull cylinder.
STANDARD FEATURES
Extension Locking Allow Mast Extension Locking from Floor Level for Safety Purpose
Water Swivel Slide Removable from Floor Level for Rod Handler Operation
Remote Pulleys Greasing Allow Mast Pulleys Greasing from Floor Level
Feed Cyl. Burst Valve Stops the Falling of the Head in Case of Hoses Failure
OPTIONAL FEATURES
Cyclone Air Filter Efficient Air Filter Added on Engine Air Intake
AVD “P” Rod Clamp Eliminates the Need to Remove of the Jaws for Oversized Bits
Casing Clamp Clamp that Holds Casing Below the Rod Clamp, Eliminates the Use of Pipe Wrench
Casing Puller Rod Clamp Mounted on a Sliding Base w/ Hydraulic Cylinders for Additional Pull Power
LCD Display 6.5” LCD Display for Parameters and Feedback (Pressures, Water Pump, Wireline Position)
Compact Work Console With Levers and Buttons to Operates Drill Rig Functions
Feedback Sensors Drill Head Position, RPM and Bit Weight Feedback on LCD Display
Chuck/Clamp Synchro Automates the Operation of Chuck and Rod Clamp When Rod Pulling
Automatic Pulling Automatically Pulls Rods in 3m, 6m or 9m Sections (Automates Feed + Chuck/Clamp)