MUM202001007 - 300 TR Price BOQ Chiller

S.I.T.
C OF 300 TR CHILLER PALNT AT SYNERGY LHO MUMBAI

Sr. No. Description QTY UNIT
SECTION -A
1 Water Cooled Screw Chiller
1.1 Supply, of 300 TR capacity Water-cooled twin screw
Compressor technology , microprocessor based control
panel,cooler, water-cooled condenser coil, refrigerant
piping, with factory fitted coupling, factory charged
R134A refrigerant, factory wired power and control
cabling. It should have BMS connectivity & Remote
monitoring feature
300 TR Water Cooled Screw Chiller with Twin Screw
Compressor Technology Chiller designed at 12/7 Deg C
1 Nos
Evaporator Temperature and 36 Deg C Ambient
conditions
Total for equipment
SECTION -B
1.1 Installtion testing and commissioning of 300 TR

capacity Water-cooled twin screw Compressor
technology , microprocessor based control panel,cooler,
water-cooled condenser coil, refrigerant piping, with 1
factory fitted coupling, factory charged R134A
refrigerant, factory wired power and control cabling. It
should have BMS connectivity & Remote monitoring
feature
2 Pumps
2.1 Chilled Water Pumps-
S.I.T.C OF End Suction Back pullout Centrifugal pump
2.1.1 for chilled water line with coupling with following tech 1 Nos
specifications
(1#Working + 1# Stand by)
a Water Qty : 125 CMH
b Static Head : 30 Mtrs
c Impeller : Bronze
d Speed : 2930 Rpm
e Seal : Mechanical
2.2 Condenser Water Pumps -

S.I.T.C End Suction Back pullout Centrifugal pump for
2.2.1 condenser water with drive motor and coupling with 1 Nos
following tech specifications
(1#Working + 1# Stand by)
a Water Qty : 160 CMH
b Static Head : 32 Mtrs
c Impeller : Bronze
d Speed : 2950 Rpm
e Seal : Mechanical
3 Cooling Tower
Supply of Induced draft type (Single cell type) cooling
tower of FRP having capacity 300 TR complete with all
3.1 R.O Nos
acc. basin, fitting, fan, motor etc with following
specification
a Wet bulb temp : 29deg C
b Entering water temp : 36.5 deg C
c Leaving water temp : 32 deg C
d Total flow rate : 160 CMH
4 Expansion Tank & Air seperator
Supply, installation, testing and commissioning of
Closed pressurised Expansion tank of capacity 500 Litre,
0 Nos
centrifugal air separator and automatic pressure
maintaining unit
5 MS Piping
Supply, Installation, Testing & Commissioning of the
following MS class 'C' pipes cut to required lengths with
32mm Thick Nitrile Rubber insulation with Glass Cloth
5.1 and installed with all welded joints, providing and fixing
in position the necessary fittings like Elbows, Tees and
Reducers for Chilled Water Line to be connected with
existing piping
a 200 mm dia 25 RMT
b 150 mm dia R.O RMT
c 100 mm dia 15 RMT
d 80 mm dia R.O RMT
6 Valve Station
SITC of Valves comprising Butterfly, Balancing, NRV's,
6.1 Check, Bleed, Ball, Flow Switches, Temperature &
pressure Guages for Chilled Water Line
a Butterfly Valve - 200 mm dia PN16 6 Nos
b Butterfly Valve - 150 mm dia PN16 R.O Nos
c Butterfly Valve - 100 mm dia PN16 6 Nos
d Butterfly Valve - 80 mm dia PN16 R.O Nos
6.2 Non return valve

b Non return Valve - 200 mm dia PN 16 1 Nos
Non return Valve - 150 mm dia PN 16 R.O Nos
Non return Valve - 100 mm dia PN 16 1 Nos
c Manual Balancing Valve - 200 mm dia PN 16 1 Nos

Manual Balancing Valve - 150 mm dia PN 16 R.O Nos
Manual Balancing Valve - 100 mm dia PN 16 1 Nos
d Ball Vave for drain - 50 mm dia 2 Nos

Ball Vave for drain - 32 mm dia 1 Nos
e Pressure Gauge 0 to 10kgs /cm2 4 Nos
f Temperature Gauge 0 to 50 Degree C 2 Nos
g Rubber bellow -200 mm dia 4 Nos

Rubber bellow -150 mm dia R.O Nos
Rubber bellow -100 mm dia 2 Nos
h Y strainer - 200 mm dia 2 Nos

Y strainer - 150 mm dia R.O Nos
Y strainer - 100 mm dia 2 Nos
i Air Vent 4 Nos
SITC of Valves comprising Butterfly, Balancing, NRV's,

6.2 Check, Bleed, Ball, Flow Switches, Temperature &
pressure Guages for Condenser Water Line
a Butterfly Valve - 200 mm dia PN16 1 Nos

Butterfly Valve - 150 mm dia PN16 R.O Nos
Butterfly Valve - 100 mm dia PN16 1 Nos
Butterfly Valve - 80 mm dia PN16 R.O Nos
b Non return Valve - 200 mm dia PN 16 1 Nos

Non return Valve - 100 mm dia PN 16 1 Nos
c Manual Balancing Valve - 200 mm dia PN 16 1 Nos

Manual Balancing Valve - 100 mm dia PN 16 1 Nos
d Ball Vave for drain - 75 mm dia 1 Nos

e Pressure Gauge 0 to 10kgs /cm2 1 Nos
f Temperature Gauge 0 to 50 Degree C 1 Nos
g Rubber bellow -200 mm dia 1 Nos

Rubber bellow -100 mm dia 1 Nos
h Y strainer - 200 mm dia 1 Nos

Y strainer - 100 mm dia 1 Nos
Chilled water piping insulation for existing chilled water

pipes of 250 mm to 50 mm Dia wherever require as per
7 site condition. Vendor shall remove existing damged
insulation and replace the same as per following
specification.
Supply & Installation Insulation with 25 mm thick
Physically crosslinked polyolefin foam with factory
laminated heavy duty and ultra tough multi-layered
composite aluminum foil facing with puncture resistance 200 Rmt
of >400N as per ASTM D4833 and Class 0 fire properties
as per BS 476 Part 6 & 7sheet cladding.
8 Electrical
Supply, Installation, Testing and Commissioning of
8.1
following Electrical Panels for control of HVAC system
Power Panel for HVAC systems - 3 no chiller, 3nos

Chilled Water Pumps, 2nos Condenser Water Pump and
a 0 Nos
1 no Cooling Tower located in basement Plant Room
including Indication Lamp, Ammeter, voltmeter
8.2 Power Cabling
3 1/2 C x 120 Sq.mm Aluminium Armoured cable with 1
a 50 Rmt
runs of 8 SWG GI bare wire
4 core 16 Sqmm Cu Armoured cable with 1 runs of 8
b 50 Rmt
SWG GI bare wire for Chilled Water Pump
4 core 10 Sqmm Cu Armoured cable with 1 runs of 8
c 100 Rmt
SWG GI bare wirefor Condenser Water Pump
d 4 core 6 Sqmm Cu Armoured for Cooling Tower 100 Rmt
9 Structural steel for Chiller 1000 kg
Scaffolding Charges for Dismantling and Fixing MS
10 1 Lot
Piping
11 Supply and installation of spring Isolators for Chiller 1 Lot
Lifting of Condenser Pipe and Cooling Tower, Shifting of
12 1 Lot
Chiller, Pumps
13 Additional charge of Refrigerant for
300Tr chiller 1 lot
14 Civil Modification work for Foundation of Pumps 1 Lot
A Total of low side

Less buy back of existing chiller (1No 300 TR)with
accessoriese (dismentling of items will be in vendor -1 lot
D scope of work )
Total low side after Buyback
Total high and low side
GST@ 28% on Section A
GST@ 18% on Section B
E GRAND TOTAL

MUM202001007 - 300 TR Price BOQ Chiller

Uploaded by

Copyright:

Available Formats

MUM202001007 - 300 TR Price BOQ Chiller

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

MUM202001007 - 300 TR Price BOQ Chiller

Uploaded by

Copyright:

Available Formats

S.I.T.

C OF 300 TR CHILLER PALNT AT SYNERGY LHO MUMBAI

1.1 Installtion testing and commissioning of 300 TR

2.2 Condenser Water Pumps -

6.2 Non return valve

c Manual Balancing Valve - 200 mm dia PN 16 1 Nos

d Ball Vave for drain - 50 mm dia 2 Nos

e Pressure Gauge 0 to 10kgs /cm2 4 Nos

f Temperature Gauge 0 to 50 Degree C 2 Nos

g Rubber bellow -200 mm dia 4 Nos

h Y strainer - 200 mm dia 2 Nos

i Air Vent 4 Nos

SITC of Valves comprising Butterfly, Balancing, NRV's,

a Butterfly Valve - 200 mm dia PN16 1 Nos

b Non return Valve - 200 mm dia PN 16 1 Nos

c Manual Balancing Valve - 200 mm dia PN 16 1 Nos

d Ball Vave for drain - 75 mm dia 1 Nos

e Pressure Gauge 0 to 10kgs /cm2 1 Nos

f Temperature Gauge 0 to 50 Degree C 1 Nos

g Rubber bellow -200 mm dia 1 Nos

h Y strainer - 200 mm dia 1 Nos

Chilled water piping insulation for existing chilled water

Power Panel for HVAC systems - 3 no chiller, 3nos

A Total of low side

You might also like