Management Reports
Management Reports
Management Reports
Management Reports
Learning Objectives
Spot a common line item in a flash report
Recognize a possible cause of an unfavorable sales volume variance
Introduction
The controller may be responsible for the issuance of a startling number of management reports that
address not only financial issues, but also possibly operational ones. In this chapter, we address not only
the types of reports that you may want to issue, but also their contents and ongoing maintenance. Ideally,
the result should be a small core group of reports that are continually adjusted to match the needs of the
business.
Controller Responsibilities
Basically, the controller is responsible for issuing a variety of reports to management and others within
the company. However, you also have to ensure that the information provided is useful for the recipients,
and that generating reports is not excessively costly. These issues lead to the following responsibilities:
Provide reports to management as requested
Review existing reports to ascertain whether they are still needed or should be modified
Generate and issue reports in the most cost-effective manner
Responsibility Reporting
Responsibility reporting is the concept that every revenue item and cost in a business can be traced to one
person within the organization, so that person should receive reports about the specific items for which he
or she is responsible. Here are several examples of responsibility reporting:
Raw materials cost. Report it to the purchasing manager.
Rent expense. Report it to the person who negotiated and signed the building lease.
Wages. Report it to the person supervising the employee earning the wages.
Warranty expense. Report it to the engineering manager.
entire business, while the production manager only sees the cost incurred by the production department,
and a machine operator may be limited to seeing the excess scrap produced by his machine.
This concept is terrific from the perspective of the company president, since it means that everyone in
the company is aware of the revenues and expenses for which they are responsible. The controller may
have a somewhat less enthusiastic viewpoint, since this calls for a virtual blizzard of reports. To avoid
becoming overwhelmed by reports, the accounting staff should create a customized report template for
each report recipient, and then set up the templates to automatically run at fixed intervals throughout the
month. This approach completely automates report creation, though it also means that the reports will
probably not be tweaked at regular intervals to meet the needs of recipients, since there are so many
reports.
Related to Cash
Cash balance. This is a perennial favorite for the flash report, since an impending cash shortage
can shut down any business.
Debt remaining. It is more important to know how much untapped debt is remaining on the
company’s line of credit than the amount of debt that the company already has, because the latter
information is already available on the balance sheet. This line item is closely associated with the
cash balance, since it reveals the company’s available liquidity.
Receivables 90+ days. This is the amount of accounts receivables more than 90 days old, and
shows the amount of cash that is most at risk of not being collected. It may be necessary to pro-
vide an accompanying detail of who is not paying, and the amount unpaid by each customer.
Obsolete inventory. This is the disposal value of any inventory designated as obsolete. You do
not need to report the original cost of this inventory, since the intent of this line item is to state the
amount of cash that can be gleaned from selling the inventory. A large balance could trigger fast
action by management to convert the designated inventory to cash.
Related to Sales
Backlog. This is the order backlog that has not yet been shipped. You might consider listing this
item first on the flash report, since it is the key indicator for the generation of sales to support the
business.
Contribution margin. The size of the backlog is not sufficient information for management if the
sales staff is buying sales by offering low prices. Hence the need for this line item, which is reve-
nues minus the direct costs of selling products. This information may only be available on a
monthly basis, so include the latest information when available. This information is not listed on
the income statement, since that document is organized to report the gross margin, which also
includes a number of fixed costs.
Related to Bottlenecks
Bottleneck utilization. This is the percentage of theoretically available time during which the
bottleneck operation ran during the reporting period. The company needs to maximize this per-
centage in order to earn a profit.
188
Chapter 14 – Management Reports
Tip: Do not include too many line items in the flash report, since managers do not want to wade through
too much information. Instead, present just the top ten metrics that really matter to company
operations.
A sample flash report is shown below. Note that the information is listed on a trend line, so that
managers can see where there may be a potential problem in comparison to the results of prior periods.
EXAMPLE
After much discussion with management, the controller of Milagro Corporation unveils the following flash report:
The controller includes a commentary with the flash report, pointing out a variety of problems. The company is
losing its order backlog, has a growing amount of unpaid accounts receivable, and is rapidly losing contribution
margin on its sales. Further, the company is suffering from a rapid decline in its percentage of order line items
shipped on time. In short, this flash report reveals a company in significant disarray.
Tip: Note the complete absence of ratios in the flash report. Ratios are useful for investigating the long-
term performance of a business, but the flash report is all about short-term performance that
management can act upon—and ratios are not useful for that purpose.
You will likely need to evaluate the flash report at regular intervals and alter its contents to match the
changing circumstances of the business. For example, if the company enters a new market, there may be a
need for metrics related to that market. Or, if the bottleneck operation has shifted, discontinue reporting
on the old bottleneck and switch to the new one.
Expense Reporting
The accounting department is continually being asked to provide reports concerning expenses incurred in
various parts of the business. When you issue this information, do not simply state the expense incurred in
the previous period (which is the usual request), since it provides little useful information. You could
provide the information in comparison to the budgeted expense for the period, but the budgeted amount
could be exceedingly unrealistic, so the comparison is less than useful. A better approach is to present the
information alongside the same expenses incurred in previous periods. Doing so provides a solid basis of
comparison, and reveals whether the most recent expenses are in accordance with historical trends. The
following sample report shows the concept:
189
Chapter 14 – Management Reports
The sample shows the expenses incurred by a typical department. Compensation expenses are listed
near the top of the report, since this expense is frequently the largest one incurred by many departments,
with other expenses listed in declining order by the amounts usually incurred. Thus, the reader’s attention
is drawn to the top of the report, where most of the expenses are located. Also, the presentation of side-
by-side results by month makes it easy for the report recipient to skim through the report and make note
of anything that rises above or falls below the long-term average.
Expenses are similar to Newton’s first law of motion. That first law states:
The velocity of a body remains constant unless the body is acted upon by an external force.
You can change a few words to arrive at Bragg’s first law of accounting, which is:
Expense levels remain constant unless the business is acted upon by a supplier or manager.
Suppliers tend to raise prices, while managers take steps to reduce expenses. These opposing forces
appear in the expense reports as changes in expense levels. A good controller can take advantage of the
first law by reporting expenses only by exception. Thus, the preceding sample expense report might
trigger a controller statement that the change in office rent in November was triggered by a new lease,
while the surge in the travel and entertainment expense in December was caused by the company
Christmas party. This additional level of reporting centers the attention of management on the key
expense exceptions, while ignoring all of the other expenses that are not changing.
An exceptional controller will go one step further and make recommendations regarding how to make
changes to expenses. Here are examples of controller-provided commentary:
“The rent expense is 20% above the rents for similar buildings within one mile of the company
facility; recommend negotiating with the landlord to drop the lease rate in exchange for extending
the term of the lease.”
“Telephone expenses can be reduced by 15% if the company adopts a single cell phone carrier for
all employees.”
“Travel expenses can be reduced by 5% if the company adopts a common travel agent for all
company travel.”
Tip: Proactive controller commentary should be welcome for office and administration expenses, since
this is the key area in which the accounting staff should have some expertise. However, the controller’s
advice may not be so welcome in other areas; consequently, be much more circumspect in making
recommendations regarding the cost of materials, product designs, marketing campaigns, and so forth.
190
Chapter 14 – Management Reports
Margin Reporting
Management will likely make inquiries about the earnings that the company is achieving in such areas as
customers, products, product lines, stores, and operating units. If the chart of accounts has been
constructed to accumulate information for any of these categories, the accounting department should be
able to provide the requested information. However, here are several issues to consider regarding the
construction of margin reports:
Information sources. For many margin analyses, such as margins by customer, it requires a
considerable amount of manual analysis to obtain the required information. If so, push back if the
requesting person wants this information on a continuing basis, since it will take up too much
staff time to create.
Cost allocations. It is rarely advisable to allocate overhead costs in a margin report. By doing so,
you are artificially reducing the reported margin on every line item in the report, which may lead
to management shutting down products, product lines, stores, or divisions that actually have ade-
quate profit margins.
Automation. If a margin report proves to be valuable, take all possible steps to automate it. For
example, if management wants to see a margin report by product, create standard costs for the
direct costs associated with each product, include those standard costs in the margin report, and
set up a process for routinely reviewing how closely the standard costs match actual costs.
Perhaps the most common of all margin reports is one that details the margin for individual products
during a particular time period. When creating this report, only include those costs that vary directly with
changes in unit volume; this usually means that only the cost of materials is included in the report, since
manufacturing overhead and direct labor costs do not vary at the unit level. A sample product margin
report is shown below.
Another possible addition to the product margin report is the cost of commissions (if any), since they
usually vary directly with unit sales.
If a company has a number of similar products that are aggregated into a product line, there may be a
request to determine the margin associated with the entire product line. When constructing this report,
you can include more expenses than just the cost of materials, since other expense types may be directly
associated with the product line. The following expenses might be included:
Advertising. This is the cost of any advertising or other marketing expenses related to the product
line in question.
Engineering. There may be a dedicated team of engineers involved with the design of only those
products included in the product line. Only include those engineering compensation and other
costs that would disappear if the product line were to be cancelled.
Manufacturing overhead. There may be a considerable amount of overhead cost associated with
a product line, such as a production manager, equipment maintenance, and utilities. Only include
those costs that would disappear if the product line were to be cancelled.
191
Chapter 14 – Management Reports
Selling expenses. There may be a dedicated sales force that only sells the product line. Their
compensation, payroll taxes, and travel and entertainment expenses should be included.
A sample product line margin report that includes the preceding expense elements is shown below.
The same format just shown for a product line works well for a margin report constructed for a retail
location, though you should replace the engineering, overhead, and sales and marketing costs with
expenses that would terminate if the store were closed, such as:
Wages and payroll taxes. This is the compensation and related payroll taxes that would disappear
if the store were closed. Thus, you would not include an apportionment of the cost of a regional
store manager.
Advertising. There may be advertising expenses related to a specific location. Do not include
advertising if the expenditures are for a group of stores.
Rent. This is the rent that would be eliminated if the store were closed. Do not include it if the
company must still pay the rent even if the store closes.
Utilities. There are usually some electrical and heating costs that would be eliminated as a result
of a store closure.
A sample store margin report that includes the preceding expense elements is shown below.
If you are asked to create a margin report for customers, be extremely careful about adding any
expenses to the report. The reason is that most expenses related to the servicing of customers are incurred
for many customers, not just one. For example, it would be unwise to include in a margin report the labor
cost associated with the customer service or field service calls related to a specific customer, because
those costs are likely to still exist even if the customer were to be terminated. However, it is acceptable to
include other costs in a customer margin analysis, such as:
Commissions. Salesperson commissions are almost certainly related to specific sales, so you can
include them in the analysis.
Deductions. Some customers claim an inordinate number of deductions when paying their
invoices, which should certainly be included in the analysis.
A sample customer margin report that includes the preceding expense elements is shown below.
192
Chapter 14 – Management Reports
The preceding customer margin report reveals a common issue that triggers the request to develop the
report—there are substantial differences in the amount of payment deductions taken by customers. In the
sample, the second-largest customer, Kona Distributors, takes such large deductions that it is the least
profitable of the customers listed in the report.
As you can see from the various sample margin reports presented here, be careful to only include
those expenses in the analysis that would be eliminated if the subject of the report were to be terminated.
All other expenses are irrelevant, and so should not be included.
Variance Reporting
If you have a standard costing system, consider setting up a variance reporting system. A variance is the
difference between the actual cost incurred and the standard cost against which it is measured. A variance
can also be used to measure the difference between actual and expected sales. Thus, variance analysis can
be used to review the performance of both revenue and expenses.
There are two basic types of variances from a standard that can arise, which are the rate variance and
the volume variance. Here is more information about both types of variances:
Rate variance. A rate variance (which is also known as a price variance) is the difference
between the actual price paid for something and the expected price, multiplied by the actual quan-
tity purchased. The “rate” variance designation is most commonly applied to the labor rate vari-
ance, which involves the actual cost of direct labor in comparison to the standard cost of direct
labor. The rate variance uses a different designation when applied to the purchase of materials,
and may be called the purchase price variance or the material price variance.
Volume variance. A volume variance is the difference between the actual quantity sold or
consumed and the budgeted amount, multiplied by the standard price or cost per unit. If the vari-
ance relates to the sale of goods, it is called the sales volume variance. If it relates to the use of
direct materials, it is called the material yield variance. If the variance relates to the use of direct
labor, it is called the labor efficiency variance. Finally, if the variance relates to the application of
overhead, it is called the overhead efficiency variance.
Thus, variances are based on either changes in cost from the expected amount, or changes in the
quantity from the expected amount. The most common variances that a controller elects to report on are
subdivided within the rate and volume variance categories for direct materials, direct labor, and overhead.
It is also possible to report these variances for revenue. Thus, the primary variances are:
193
Chapter 14 – Management Reports
All of the variances noted in the preceding table are explained below, including examples to
demonstrate how they are applied.
A positive variance means that actual costs have increased, and a negative variance means that actual
costs have declined.
The standard price is the price that your engineers believe the company should pay for an item, given
a certain quality level, purchasing quantity, and speed of delivery. Thus, the variance is really based on a
standard price that was the collective opinion of several employees based on a number of assumptions
that may no longer match a company's current purchasing situation.
EXAMPLE
During the development of its annual budget, the engineers and purchasing staff of Milagro Corporation decide
that the standard cost of a green widget should be set at $5.00, which is based on a purchasing volume of 10,000
for the upcoming year. During the subsequent year, Milagro only buys 8,000 units, and so cannot take advantage
of purchasing discounts, and ends up paying $5.50 per widget. This creates a purchase price variance of $0.50 per
widget, and a variance of $4,000 for all of the 8,000 widgets that Milagro purchased.
There are a number of possible causes of a purchase price variance. For example:
Layering issue. The actual cost may have been taken from an inventory layering system, such as
a first-in first-out system, where the actual cost varies from the current market price by a sub-
stantial margin.
Materials shortage. There is an industry shortage of a commodity item, which is driving up the
cost.
New supplier. The company has changed suppliers for any number of reasons, resulting in a new
cost structure that is not yet reflected in the standard.
Rush basis. The company incurred excessive shipping charges to obtain materials on short notice
from suppliers.
Volume assumption. The standard cost of an item was derived based on a different purchasing
volume than the amount at which the company now buys.
(Actual unit usage - Standard unit usage) × Standard cost per unit = Material yield variance
An unfavorable variance means that the unit usage was greater than anticipated.
The standard unit usage is developed by the engineering staff, and is based on expected scrap rates in
a production process, the quality of raw materials, losses during equipment setup, and related factors.
EXAMPLE
The engineering staff of Milagro Corporation estimates that 8 ounces of rubber will be required to produce a green
widget. During the most recent month, the production process used 315,000 ounces of rubber to create 35,000
green widgets, which is 9 ounces per product. Each ounce of rubber has a standard cost of $0.50. Its material yield
variance for the month is:
194
Chapter 14 – Management Reports
(315,000 Actual unit usage – 280,000 Standard unit usage) × $0.50 Standard cost/unit
= $17,500 Material yield variance
There are a number of possible causes of a material yield variance. For example:
Scrap. Unusual amounts of scrap may be generated by changes in machine setups, or because
changes in acceptable tolerance levels are altering the amount of scrap produced. A change in the
pattern of quality inspections can also alter the amount of scrap.
Material quality. If the material quality level changes, this can alter the amount of quality
rejections. If an entirely different material is substituted, this can also alter the amount of rejec-
tions.
Spoilage. The amount of spoilage may change in concert with alterations in inventory handling
and storage.
(Actual rate – Standard rate) × Actual hours worked = Labor rate variance
An unfavorable variance means that the cost of labor was more expensive than anticipated.
The standard labor rate is developed by the human resources and engineering employees, and is based
on such factors as the expected mix of pay levels among the production staff, the amount of overtime
likely to be incurred, the amount of new hiring at different pay rates, the number of promotions into
higher pay levels, and the outcome of contract negotiations with any unions representing the production
staff.
EXAMPLE
The human resources manager of Milagro Corporation estimates that the average labor rate for the coming year
for Milagro's production staff will be $25/hour. This estimate is based on a standard mix of personnel at different
pay rates, as well as a reasonable proportion of overtime hours worked.
During the first month of the new year, Milagro has difficulty hiring a sufficient number of new employees, and so
must have its higher-paid existing staff work overtime to complete a number of jobs. The result is an actual labor
rate of $30/hour. Milagro's production staff worked 10,000 hours during the month. Its labor rate variance for the
month is:
($30/hour Actual rate – $25/hour Standard rate) × 10,000 hours
= $50,000 Labor rate variance
There are a number of possible causes of a labor rate variance. For example:
Incorrect standards. The labor standard may not reflect recent changes in the rates paid to
employees (which tend to occur in bulk for all staff).
Pay premiums. The actual amounts paid may include extra payments for shift differentials or
overtime.
Staffing variances. A labor standard may assume that a certain job classification will perform a
designated task, when in fact a different position with a different pay rate may be performing the
work.
195
Chapter 14 – Management Reports
An unfavorable variance means that labor efficiency has worsened, and a favorable variance means
that labor efficiency has increased.
The standard number of hours represents the best estimate of your industrial engineers regarding the
optimal speed at which the production staff can manufacture goods. This figure can vary considerably,
based on assumptions regarding the setup time of a production run, the availability of materials and
machine capacity, employee skill levels, the duration of a production run, and other factors. Thus, the
multitude of variables involved makes it especially difficult to create a standard that you can meaningful-
ly compare to actual results.
EXAMPLE
During the development of its annual budget, the industrial engineers of Milagro Corporation decide that the
standard amount of time required to produce a green widget should be 30 minutes, which is based on certain
assumptions about the efficiency of Milagro's production staff, the availability of materials, capacity availability,
and so forth. During the month, widget materials were in short supply, so Milagro had to pay production staff even
when there was no material to work on, resulting in an average production time per unit of 45 minutes. The
company produced 1,000 widgets during the month. The standard cost per labor hour is $20, so the calculation of
its labor efficiency variance is:
There are a number of possible causes of a labor efficiency variance. For example:
Instructions. The employees may not have received written work instructions.
Mix. The standard assumes a certain mix of employees involving different skill levels, which
does not match the actual staffing.
Training. The standard may be based on an assumption of a minimum amount of training that
employees have not received.
Work station configuration. A work center may have been reconfigured since the standard was
created, so the standard is now incorrect.
A favorable variance means that the actual variable overhead expenses incurred per labor hour were
less than expected.
The variable overhead spending variance is a compilation of production expense information
submitted by the production department, and the projected labor hours to be worked, as estimated by the
industrial engineering and production scheduling staffs, based on historical and projected efficiency and
equipment capacity levels.
EXAMPLE
The controller of Milagro Corporation calculates, based on historical and projected cost patterns, that the company
should experience a variable overhead rate of $20 per labor hour worked, and builds this figure into the budget. In
April, the actual variable overhead rate turns out to be $22 per labor hour. During that month, production
employees work 18,000 hours. The variable overhead spending variance is:
196
Chapter 14 – Management Reports
18,000 Actual hours worked × ($22 Actual variable overhead rate – $20 Standard overhead rate)
= $36,000 Variable overhead spending variance
There are a number of possible causes of a variable overhead spending variance. For example:
Account misclassification. The variable overhead category includes a number of accounts, some
of which may have been incorrectly classified and so do not appear as part of variable overhead
(or vice versa).
Outsourcing. Some activities that had been sourced in-house have now been shifted to a supplier,
or vice versa.
Supplier pricing. Suppliers have changed their prices, which have not yet been reflected in
updated standards.
A favorable variance means that the actual hours worked were less than the budgeted hours, resulting
in the application of the standard overhead rate across fewer hours, resulting in less expense incurred.
The variable overhead efficiency variance is a compilation of production expense information
submitted by the production department, and the projected labor hours to be worked, as estimated by the
industrial engineering and production scheduling staffs, based on historical and projected efficiency and
equipment capacity levels.
EXAMPLE
The controller of Milagro Corporation calculates, based on historical and projected labor patterns, that the
company's production staff should work 20,000 hours per month and incur $400,000 of variable overhead costs
per month, so it establishes a variable overhead rate of $20 per hour. In May, Milagro installs a new materials
handling system that significantly improves production efficiency and drops the hours worked during the month to
19,000. The variable overhead efficiency variance is:
$20 Standard overhead rate/hour × (19,000 Hours worked – 20,000 Standard hours)
= $20,000 Variable overhead efficiency variance
Actual fixed overhead – Budgeted fixed overhead = Fixed overhead spending variance
The amount of expense related to fixed overhead should (as the name implies) be relatively fixed, and
so the fixed overhead spending variance should not theoretically vary much from the budget. However, if
the manufacturing process reaches a step cost trigger point, where a whole new expense must be incurred,
then this can cause a significant unfavorable variance. Also, there may be some seasonality in fixed
overhead expenditures, which may cause both favorable and unfavorable variances in individual months
of a year, but which cancel each other out over the full year.
197
Chapter 14 – Management Reports
EXAMPLE
The production manager of Milagro Corporation estimates that the fixed overhead should be $700,000 during the
upcoming year. However, since a production manager left the company and was not replaced for several months,
actual expenses were lower than expected, at $672,000. This created the following favorable fixed overhead
spending variance:
There are a number of possible causes of a fixed overhead spending variance. For example:
Account misclassification. The fixed overhead category includes a number of accounts, some of
which may have been incorrectly classified and so do not appear as part of fixed overhead (or
vice versa).
Outsourcing. Some activities that had been sourced in-house have now been shifted to a supplier,
or vice versa.
Supplier pricing. Suppliers have changed their prices, which have not yet been reflected in
updated standards.
(Actual price – Budgeted price) × Actual unit sales = Selling price variance
An unfavorable variance means that the actual price was lower than the budgeted price.
The budgeted price for each unit of product or sales is developed by the sales and marketing manag-
ers, and is based on their estimation of future demand for these products and services, which in turn is
affected by general economic conditions and the actions of competitors. If the actual price is lower than
the budgeted price, the result may actually be favorable to the company, as long as the price decline spurs
demand to such an extent that the company generates an incremental profit as a result of the price decline.
EXAMPLE
The marketing manager of Milagro Corporation estimates that the company can sell a green widget for $80 per
unit during the upcoming year. This estimate is based on the historical demand for green widgets.
During the first half of the new year, the price of the green widget comes under extreme pressure as a new
supplier in Ireland floods the market with a lower-priced green widget. Milagro must drop its price to $70 in order
to compete, and sells 20,000 units during that period. Its selling price variance during the first half of the year is:
($70 Actual price – $80 Budgeted price) × 20,000 units = $(200,000) Selling price variance
There are a number of possible causes of a selling price variance. For example:
Discounts. The company has granted various discounts to customers to induce them to buy
products.
Marketing allowances. The company is allowing customers to deduct marketing allowances from
their payments to reimburse them for marketing activities involving the company’s products.
Price points. The price points at which the company is selling are different from the price points
stated in its standards.
Product options. Customers are buying different product options than expected, resulting in an
average price that differs from the price points stated in the company’s standards.
198
Chapter 14 – Management Reports
(Actual units sold – Budgeted units sold) × Budgeted price per unit = Sales volume variance
An unfavorable variance means that the actual number of units sold was lower than the budgeted
number sold.
The budgeted number of units sold is derived by the sales and marketing managers, and is based on
their estimation of how the company's product market share, features, price points, expected marketing
activities, distribution channels, and sales in new regions will impact future sales. If the product's selling
price is lower than the budgeted amount, this may spur sales to such an extent that the sales volume
variance is favorable, even though the selling price variance is unfavorable.
EXAMPLE
The marketing manager of Milagro Corporation estimates that the company can sell 25,000 blue widgets for $65
per unit during the upcoming year. This estimate is based on the historical demand for blue widgets, as supported
by new advertising campaigns in the first and third quarters of the year.
During the new year, Milagro does not have a first quarter advertising campaign, since it is changing advertising
agencies at that time. This results in sales of just 21,000 blue widgets during the year. Its sales volume variance is:
(21,000 Units sold – 25,000 Budgeted units) × $65 Budgeted price per unit
= $260,000 Unfavorable sales volume variance
There are a number of possible causes of a sales volume variance. For example:
Cannibalization. The company may have released another product that competes with the product
in question. Thus, sales of one product cannibalize sales of the other product.
Competition. Competitors may have released new products that are more attractive to customers.
Price. The company may have altered the product price, which in turn drives a change in unit
sales volume.
Trade restrictions. A foreign country may have altered its barriers to competition.
199
Chapter 14 – Management Reports
their transactional data. Thus, a variance report only highlights the general areas within which
problems occurred, but does not necessarily tell anyone the nature of the underlying problems.
The preceding issues do not always keep controllers from calculating complete sets of variances for
management consumption, but they do bring the question of whether the work required to calculate
variances is a good use of the accounting staff’s time.
Labor
Labor rate variance Labor rates are difficult to change; do not track unless you can
shift work into lower pay grades
Labor efficiency variance Can drive contrary behavior in favor of long production runs, when
less labor efficiency in a just-in-time environment results in greater
overall cost reductions; not recommended
Overhead
Variable overhead spending variance Caused by changes in the actual costs in the overhead cost pool,
and so should be reviewed
Variable overhead efficiency variance Caused by a change in the basis of allocation, which has no real
impact on underlying costs; not recommended
Fixed overhead spending variance Since fixed overhead costs should not vary much, a variance here
is worth careful review; however, most components of fixed
overhead are long-term costs that cannot be easily changed in the
short term
Revenue
Selling price variance Caused by a change in the product price, which is under
management control, and therefore should be brought to their
attention
Sales volume variance Caused by a change in the unit volume sold, which is not under
direct management control, though this can be impacted by
altering the product price
The preceding table shows that the variances most worthy of management’s attention are the purchase
price variance, variable overhead spending variance, fixed overhead spending variance, and selling price
variance. Reducing the number of reported variances is well worth the controller’s time, since reporting
the entire suite of variances calls for a great deal of investigative time to track down variance causes and
then configure the information into a report suitable for management consumption.
200
Chapter 14 – Management Reports
Variable Overhead
Rush order 300 Overnight charge to bring in grease for bearings
Utility surcharge 2,400 Charged extra for power usage during peak hours
Fixed Overhead
Property taxes 3,000 Tax levy increased by 8%
Rent override 8,000 Landlord charge for proportional share of full-year expenses
Selling Price
Marketing discounts 4,000 Customers took discounts for advertising pass-through
Sales returns 11,000 450 units returned with broken spring assembly
* Note: All amounts are unfavorable variances
The preceding table can be expanded to include the names of the managers responsible for correcting
each item noted.
Summary
The controller is probably responsible for the issuance of more management reports than everyone else in
a business, combined. This means that there is a considerable responsibility to not issue erroneous or
misleading information that might lead to serious missteps by management. Thus, you should withhold
the distribution of any reports that initially appear to contain unusual results, to verify that the information
is correct (or not). Also, do not issue reports that may be misleading. This is a particular concern when
issuing margin reports, since allocated expenses can artificially create a low margin that might incorrectly
lead management to terminate a product, product line, or store, or drop a customer. Finally, do not
overwhelm the company with reports. As noted in the Variance Reporting section, just because there is a
variance does not mean that you must report it. Instead, only issue reports containing meaningful
information that management should act upon. All other reports are simply wasting their time, and make
it more difficult to find the relevant information that they need to run the business.
201
Chapter 14 – Management Reports
Review Questions
1. Responsibility reporting is designed to:
A. Concentrate all information reporting at the top of an organization
B. Reduce the number of reports issued
C. Trace revenues and expenses to those responsible for them
D. Increase the number of manually-generated reports
202
Chapter 14 – Management Reports
Review Answers
1. Responsibility reporting is designed to:
A. Incorrect. Responsibility reporting spreads information throughout an organization.
B. Incorrect. Responsibility reporting greatly increases the number of reports.
C. Correct. Responsibility reporting traces revenues and expenses to those responsible for them.
D. Incorrect. Automation is normally used to generate the many reports needed under a respon-
sibility reporting system.
203