Nothing Special   »   [go: up one dir, main page]

00206bb691e0181106140511 0001

Download as pdf
Download as pdf
You are on page 1of 1
Excavator preset values for working with Xcentric Ripper Performance will be lower with lower presets For presetting procedures of pressures and flows the Xcentric Ripper should NOT be mounted in the excavator. ADJUSTMENT OF PRESSURE RELIEF VALVE Model | Pressure reliet (+15%) Model | Pressure relief (+15%) MPa xAt0 6 2320 i XRI5 18 2610 xR62 28 ‘4060 ‘xR20 20 2300 XR60 28 | 4060 XR22 aa | xR62 : = XR30 24 | 3480 X80 4350 XR32 24 3480 XRB2 4360 xRa0 24 3480 XR120 24 3480 1 xRa2 24 30 | R122 : : Orr) Flow Settings (+/- 5%) MPs (USoalimin pst at 13 16 at 1885 XA5O at 15 |) 26 | at aio \wsa | 270 at 23 || at gaa at 16 42 at 2320 XR60 280 at 23 4 at 3335 = |= | wea | ol eee | ai 21 | 48 | at 3045 xR80 at 3480 at 21 50 at 3045 ‘XR82 at 3480 at 21 53 at 3045 | xrv20 at 3045 at 21 55 at 3045 XR122 = MAXIMUM RETURN BACK PRESSURE ‘The retum back pressure fgVEFEAREXGSE OHIMPA! Excavator must WOHKWaVa!In BFEBKEF GH, another working mode can damage the Xcentric Ripper. MAXIMUM DRAIN CIRCUIT PRESSURE The maximum pressure on drain circuit during the Xcentric Ripper operation flEVERIESR[SXeSsH (Of O4IMPR in 6 cannected direct to tank. any situation, Drain hose must bé * Ali adjustment must be done at excavator. * Do not manipulate Keentric Ripper valve block, filed on warranty form invalidate the warranty on tippers. * Preset values mu

You might also like