Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 24 views

    T 90 Ep2 S: Motor Vehicle Transmission Oil

    Uploaded by

    robertjob34
    T 90 EP2 S oil is a mineral-based transmission oil that provides protection against wear, corrosion, and rust. It is intended for use in motor vehicle gear transmissions and other mechanical transmission systems. The technical sheet lists 11 quality characteristics the oil must meet, such as minimum viscosity levels and passing tests for copper corrosion, foam stability, and high-pressure resistance. The oil is produced and tested according to relevant standards, and its packaging, storage, and handling follow applicable regulations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    T 90 Ep2 S: Motor Vehicle Transmission Oil

    Uploaded by

    robertjob34
    24 views1 page
    T 90 EP2 S oil is a mineral-based transmission oil that provides protection against wear, corrosion, and rust. It is intended for use in motor vehicle gear transmissions and other mechanical transmission systems. The technical sheet lists 11 quality characteristics the oil must meet, such as minimum viscosity levels and passing tests for copper corrosion, foam stability, and high-pressure resistance. The oil is produced and tested according to relevant standards, and its packaging, storage, and handling follow applicable regulations.

    Original Description:

    Original Title

    FTex_T_90_EP2S_GL-4_25_03_2013_Engl

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    T 90 EP2 S oil is a mineral-based transmission oil that provides protection against wear, corrosion, and rust. It is intended for use in motor vehicle gear transmissions and other mechanical transmission systems. The technical sheet lists 11 quality characteristics the oil must meet, such as minimum viscosity levels and passing tests for copper corrosion, foam stability, and high-pressure resistance. The oil is produced and tested according to relevant standards, and its packaging, storage, and handling follow applicable regulations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    24 views1 page

    T 90 Ep2 S: Motor Vehicle Transmission Oil

    Uploaded by

    robertjob34
    T 90 EP2 S oil is a mineral-based transmission oil that provides protection against wear, corrosion, and rust. It is intended for use in motor vehicle gear transmissions and other mechanical transmission systems. The technical sheet lists 11 quality characteristics the oil must meet, such as minimum viscosity levels and passing tests for copper corrosion, foam stability, and high-pressure resistance. The oil is produced and tested according to relevant standards, and its packaging, storage, and handling follow applicable regulations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Date: 25 March 2013

    TECHNICAL SHEET
    MOTOR VEHICLE TRANSMISSION OIL
    T 90 EP2 S
     T 90 EP 2S oil is obtained from refined mineral base oils and additives which provide protection against wear, corrosion and rust, high pressure
    resistance, antifoaming properties and an adequate behaviour both at low and at high temperatures (it meets the requirements for the API GL-4
    additivation level).
     It is used for the lubrication of gear transmissions of motor vehicles (gear box, steering box) and for other mechanical transmission systems, in
    accordance with the technical manual provisions of the relevant motor vehicles / systems.
     Quality conditions for the T 90 EP2 S oil are the following:

    Item
    CHARACTERISTICS ADMISSIBILITY CONDITIONS TEST METHOD
    No.
    SR EN ISO 3675/C91
    1 Density at 15oC, g/cm3, max. 0.915 ASTM D 1298
    ASTM D 7042
    Kinematic viscosity at 40oC, mm2s-1 (cSt ), min. 160 SR EN ISO 3104/AC
    2 ASTM D 445
    Kinematic viscosity at 100oC, mm2s-1 (cSt ) 16.5 – 18.0 ASTM D 7042
    SR ISO 2909
    3 Viscosity index, min. 85* ASTM D 2270
    ASTM D 7042
    4 Freezing point oC, max. -20 STAS 39

    5 Flash point, M, °C, min. 220 STAS 5489

    SR 13484
    6 Water content nil
    ASTM D 95
    7 Substances insoluble in organic solvents, %, max. 0.015 STAS 33, met. 1
    Foaming properties
    Foaming tendency – foam stability:
    Foam volume after 5 minutes of air blowing / after 10 minutes of rest, 30-0
    8 cm3, max. 30-0 ASTM D 892
    - at 24°C 30-0
    - at 93.5°C
    - at 24°C, after determination at 93.5oC
    SR EN ISO 2160
    9 Copper strip corrosion, 3 hours at 120°C, max. 2c
    ASTM D 130
    SR ISO 7120
    10 Capacity of protection against steel rusting No rust traces
    ASTM D 665 (A)
    High pressure resistance on the four ball machine:
    11 - load calculated for a size delay of 2,5 s, N, min. 1300 STAS 8618
    - specific wear (60 minutes, 40 daN), mm, max. 0.5
    * value recorded without adding a viscosity index improver.

     Accuracy evaluation of the test methods from this technical sheet should meet the requirements of Standard SR EN ISO 4259:2007 ”Petroleum products – determining
    and applying the accuracy values regarding the test methods”.
     Samples shall be taken in accordance with SR EN ISO 3170:2004/C91:2005 “Liquid petroleum products. Manual sampling”.
     Packaging, marking, storage, transport and handling are performed according to the regulations in force (decisions, regulations, etc. specified in the product safety data
    sheet) and to LUKOIL LUBRICANTS EAST EUROPE S.R.L.’s instructions/internal procedures.
     For details, see the Safety Data Sheet (SDS).
     Storage life is of 5 years from the manufacture date.

    Romania, Bucuresti, Sectorul 1, Strada Sediul social, Bucuresti Tel: +40 21 227 23 50/54/55
    TIPOGRAFILOR, Nr. 11-15, Cladirea - A2, Etaj P Fax: +40 21 232 32 95
    Registrul Comertului nr. J40/21/04.01.2013, Departament Productie Tel/ Fax: 0244 504 654
    C.U.I. RO19737772 Departament Tehnic- Calitate Tel/ Fax: 0244 504 679
    ROL: RO52ABNA4100264100329602
    RBS Bank Romania www.lukoil-lubricants.ro

    You might also like