AQU4518R0

DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65
5/65/65-16i/18i/18i/18i-
M/M/M/M-R
EasyRET Quater-Band
Quater Band Antenna with 4 Integrated RCU
Us - 2.0m
2 0m

Antenna Specifications
Electrical Properties
790 - 960 (r)
Frequency range (MHz)
790 - 862 824 - 894 880 - 960
Polarization +45π , -45π
Electrical downtilt (π) 0 - 10, continuously adjustable
0π 5π 10π 0π 5π 10π 0π 5π 10π
Gain (dBi)
15.7 15.9 15.6 16.0 16.1 15.6 16.1 16.3 15.8
Side lobe suppression (Typ.) (dB) 0π 5π 10π 0π 5π 10π 0π 5π 10π
-for first side lobe above main beam 18 18 18 18 18 18 18 18 18
-within 0π - 15π sector above horizon 17 17 16 17 17 16 17 17 17
Horizontal 3dB beam width (π) 65 64 62
Vertical 3dB beam width (π)
( ) 10 1
10.1 98
9.8 93
9.3
VSWR < 1.5
Isolation between ports (dB)  28
Front to back ratio, copolar (dB) Typ. 28
0π Typ. 18
Cross polar ratio (dB)
f60π Typ. 10
Max. power per input (W) 500 (at 50ć ambient temperature) *
Intermodulation IM3 (dBc)  -153 (2 x 43 dBm carrier)
I
Impedance
d () 50
Grounding DC Ground

Electrical Properties
1710 - 2690 (yyR) 1710 - 2170 (bL) 2490 - 2690
Frequency range (MHz)
1710 - 1990 1920 - 2200 200 - 2490
22 2490 - 2690 1710 - 1990 1920 - 2170 (yL)
Polarization +45π , -45π
Electrical downtilt (π) 0 - 10 , continuously adjustable
0π 5π 10π 0π 5π 10π 0ππ 5π 10π 0π 5π 10π 0π 5π 10π 0π 5π 10π 0π 5π 10π
Gain (dBi)
17.5 17.3 17.0 17.8 17.8 17.3 18..0 18.0 17.6 17.8 18.2 17.7 17.0 17.2 17.0 17.4 17.7 17.0 17.7 17.7 17.2
Side lobe suppression (Typ.) (dB) 0π 5π 10π 0π 5π 10π 0ππ 5π 10π 0π 5π 10π 0π 5π 10π 0π 5π 10π 0π 5π 10π
-for first side lobe above main beam 16 16 17 17 17 17 17
7 18 18 17 18 18 15 17 16 15 17 17 17 17 15
-within 0π - 15π sector above horizon 15 15 15 16 16 16 16
6 16 16 15 15 15 15 15 15 15 16 15 15 15 15
Horizontal 3dB beam width (π) 65 62 60 60 65 62 60
Vertical 3dB beam width (π) 5.8 5.4 4.8 4.3 5.8 5.4 4.3
VSWR < 1.5
Intra-system:  28
Isolation between ports (dB)
Inter-system:  30
Front to back ratio, copolar (dB) Typ. 28
0π Typ. 18
Cross polar ratio (dB)
f60π Typ. 10
Max. power per input (W) 250 (at 50ć ambient temperature) *
Intermodulation IM3 (dBc)  -153 (2 x 43 dBm carrier)
Impedance () 50
Grounding DC Ground

* Total power : 800 W (at 50ć ambient temperature)

1
 AQU4518R0
DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65
5/65/65-16i/18i/18i/18i-
M/M/M/M-R
EasyRET Quater-Band
Quater Band Antenna with 4 Integrated RCU
Us - 2.0m
2 0m
106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1999 x 349 x 166
Packing dimensions (H x W x D) (mm) 2290 x 410 x 240
Antenna weight (kg) 2
28.0
Clamps weight (kg) 3.6 (2 units)
A t
Antenna packing
ki weight
i ht (kg)
(k ) 42 1 (Incl
42.1 (I luded
d d clamps)
l )
Mast diameter supported (mm) 50
0 - 115
Radome material Fibe
erglass
Radome colour Light grey

1892
1999
Operational temperature (ć) -40
0 .. +65
Frontal: 05 (at 150 km/h)
70
Wind load (N) Lateral: 23
30 (at 150 km/h)
Rear side: 73
30 (at 150 km/h)
Max. operational wind speed (km/h) 150
Survival wind speed (km/h) 200
Connector 8 x 7/16 DIN Female
Connector position Bo
ottom

Accessories
Item Model Description Weight Units per antenna
Downtilt kit ASMDT0D01 Mechanical downtilt: 0 - 12 π 2 kkg 1 (Separate packing)

790 - 960 MHz 1710 - 2690 MHz

1710 - 2170 MHz 2490 - 2690 MHz

2
 AQU4518R0
DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65
5/65/65-16i/18i/18i/18i-
M/M/M/M-R
EasyRET Quater-Band
Quater Band Antenna with 4 Integrated RCU
Us - 2.0m
2 0m

Integrated RCU Specifications

Prop
perties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input
p voltage
g range
g ((V)) 10 - 30 DC
< 10 (motor activated)
Power consumption (W)
< 0.5 (stand by)
Adjustment time (full range) (s) < 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-4
485B n/c RS-485A DC DC return n/c
3 (10/350 s)
Lightning protection (kA)
10 (8/20 s)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a ven ndor defined command. For more details about protocol switching function,
contact Huawei before system installation.

Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE

Integrated RCU S/N:

HWMxxx…...r
HWMxxx….bL
HWMxxx….yL bL yL yyR

HWMxxx...yyR

r - Red b - Blue y - Yellow r

L - Left array R - Right array

Huawei Technologies Co., Ltd. Bantian, Longgang Dis

strict, Shenzhen 518129, P.R.China www.huawei.com
Any previous datasheet issues become invalid. 3 Issue: 2013-09-17