Oilfield Instruments

Sales & Service

Automatic Bit Weight Control System

www.dicksoilfield.com

THE

SATELLITE
AUTOMATIC DRILLING
USED
W O R L D -W I D E

CONTROL SYSTEM

AUTOMATIC BIT WEIGHT

CONTROL SYSTEM

l
SAVES TIME and MONEY
l REDUCED DRILLING COST PER FOOT
l INCREASED RATE OF PENETRATION
l LONGER BIT LIFE
l STRAIGHTER HOLE
 CUT COSTS WITH THE SATELLITE
AUTOMATIC DRILLING CONTOL SYSTEM

The realization that constant, precise weight control is a

critical factor in drilling efficiency, has led modern drilling tech-
niques toward automation. It is universally recognized that
manual operation - however skillful - is unable to keep this vital
weight control within the required limits throughout an entire
drilling program.

Every deviation from the optimum weight on the bit for a

given formation increases the cost of making hole. Uncontrolled
bit-weight variations adversely affect hole straightness, penetra-
tion rate and bit life.

Satellite Automatic Drilling Control - unique in conception

with its two-speed differential Gear Unit for regular and high
speed drilling and its Comparative Weight Indicator for sensitive
visual control-has proven itself accurate, reliable and safe during
thousands of hours of trouble-free performance on all kinds of
rigs and under all drilling conditions.

Simple to install and simple to maintain, the Satellite will, for

years, go on making hole better and faster than by any other
means, manual or otherwise, and the minutes it saves tour after
tour grow to hours and days and weeks. Thus, it not only rapidly
pays for itself, but keeps paying dividends in time saved, longer
bit life, reduced wear and tear on the rig and improved overall
efficiency.

AUTOMATIC DRILLING CONTROL SYSTEM

ODESSA, TEXAS - 432-381-6565
 SAVES TIME AND MONEY
A Control originates in the Satellite
pneumatic deadline diaphragm (fig.
1) or in a hydraulic tie-down anchor
(fig. 2) which senses the deadline
tension and reacts to its variations.

(fig. 1) (fig. 2)

These reactions are relayed to the bourdon

B tube of the Controller Unit where they are
continuously and automatically compared with
a pre-set point, corresponding to the desired
weight on the bit.
When that weight, reflected in increased
deadline tension, falls below the set point, the
Controller opens a valve to allow air to be fed to
the Air Motor.

Rotated by the Air Motor,

C through the two-speed differen-
tial Gear Unit, the lift line reel
reels in a wire line attached to the
brake lever of the drawworks.
It raises this lever and permits
the drum to rotate and to feed off
drilling line.
This increases the weight on
the bit and reduces the tension in
the deadline.

The instant the drum starts moving, it rotates a

rubber friction wheel against the inside of the
D drum spool. This rotation is transferred by flexible
shaft, as a reverse force, to the differential Gear
Unit. There, it overrides the action of the Air Motor
and lowers the brake lever by gradually unreeling
the lift line. When the weight on the bit and the
tension in the deadline have resumed their initial
relationship, the Controller Unit closes the valve
to the Air Motor. The brake is fully applied. The
cycle is completed.
 SATELLITE AUTOMATIC DRILLER..
The principle of the Satellite Driller is based on the The purpose of the Satellite Driller is to maintain a
relationship between weight on bit and total hook constant predetermined bit weight in order to
load. Any variation in one causes an inverse obtain optimum drilling efficiency.
variation in the other.
SCHEMATIC DIAGRAM

CONTROLLER

AIR LINE

HYDRAULIC LINE

RIG AIR IN
1. 2.
Precise bit weight control originates direct from Activated by the air motor through a two-
the Martin-Decker weight indicator system which speed differential gear unit, the lift-line raises
continuously monitors any change in weight. the drawwork's brake lever, this allows the drum
Weight signals are simultaneously displayed and to rotate, feed off drill line and increase weight
relayed to the Satellite controller unit. on bit.

FEATURES . . .
l Maintains a predetermined weight on bit to
drill quickly, efficiently.
Unlimited Brake Lever stroke compensates l Compensates for worn, imperfect or wet brake
for worn, imperfect, or wet linings as well as linings for consistent, on target performance.
worn brake linkages. No piston or linkage type
system can adjust to these deficiencies. l Two-speed gear unit covers widest range of
penetration rates.
Two-speed Gear Unit covers widest range of
penetration rates. l Smooth, gradual opening and throttling of the
air valve provides sensitive, precise bit weight
Gradualness in opening and throttling of control.
the Air Valve gives smooth, sensitive response.
l No electrical components - safe operation in
Absence of electrical components provides explosive atmosphere.
safe operation in explosive atmospheres. l Rugged construction - years of trouble-free
service.
Rugged construction assures years of trouble
free operation.
 . . . The Driller's Edge.
DRUM SPOOL
BRAKE LEVER
LIFT LINE
AIR MOTOR

FLEX SHAFT

ROTATION
SEDNSOR SPRING
TENSION
DIFFERENTIAL GEAR

3. 4.
The bourdon tube in the controller unit reacts By means of a friction wheel riding against the
to weight changes and, in turn, continuously drum spool, the drum rotation is transferred as a
compares actual bit weight with the preset reverse force back to the differential gear unit.
desired bit weight. This force overrides the air motor action, gradu-
When the desired bit weight falls below the set ally releases the lift-line and allows the
point, the controller opens a valve which regu- drawwork's brake to be applied.
lates air flow to the air motor. When the actual bit weight reaches the
Satellite Driller differential gear unit with lift line reel. desired weight set point, the controller closes the
Break lever with lift line attached. air motor valve and the brake is fully applied.
Driller's console with Satellite Driller installed.
 Oilfield Instruments
Sales & Service

Automatic Bit Weight Control System

www.dicksoilfield.com

PANEL MOUNT CONTROLLER BULK MOUNT CONTROLLER

DRUM SENSOR 2-SPEED MOTOR

INSTRUMENTATION CATALOG
 WEIGHT INDICATORS
ANCHOR TYPE
WAGNER INSTRUMENTATION 2000's anchor type weight
indicators are designed for accurate indication of hook load and
weight on bit. Our weight indicators are designed to work with all
major deadline anchors using either tension or compression
loadcells. Panel mount and box mount systems are available in
English and Metric divisions. Each system is comprised of a tough
diaphragm type loadcell, high pressure hose assy with disconnects,
12" or 16" indicator with complete dial set, and damper assy to
dampen extreme shock and excessive pointer movement during
tough drilling situations.

MODEL 150 (AT 111)

• 150,000 LB SINGLE LINE LOAD
• 12" OR 16" INDICATOR
• DIAL CONFIGURATION 10/12 14/16
• USES CC106 COMPRESSION L/C
HOW TO ORDER MODEL 125 (AT110)
• SPECIFY PANEL OR BOX MOUNT • 125,000 LB SINGLE LINE LOAD
• SPECIFY SINGLE LINE LOAD • 12" OR 16" INDICATOR
• SPECIFY ANCHOR USED • DIAL CONFIGURATION 10/12 14/16
• SPECIFY WIRELINE SIZE • USES CC106 COMPRESSION L/C
• SPECIFY GAUGE SIZE (12" OR 16") MODEL 100 (AT104)
• 100,000 LB SINGLE LINE LOAD
MODEL 40 (AT101) • 12" OR 16" INDICATOR
• 40,000 LB SINGLE LINE LOAD • DIAL CONFIGURATION 8/10 12/14
• 12" OR 16" INDICATOR • USES CC106 COMPRESSION L/C OR
• DIAL CONFIGURATION 4/6 8/10 • TC100 TENSION L/C
• USES CC104 COMPRESSION L/C MODEL 75 (AT103)
• 75,000 LB SINGLE LINE LOAD
MODEL 30 (AT108) • 12" OR 16" INDICATOR
• 30,000 LB SINGLE LINE LOAD • DIAL CONFIGURATION 8/10 6/12
• 8.5" OR 12" INDICATOR • USES CC106 COMPRESSION L/C OR
• DIAL CONFIGURATION 4/6/8 • TC100 TENSION L/C
• USES CC112 COMPRESSION L/C MODEL 50 (AT102)
• 50,000 LB SINGLE LINE LOAD
• 12" OR 16" INDICATOR
• DIAL CONFIGURATION 8/10 6/12
• USES CC105 COMPRESSION L/C OR
• TC100 TENSION L/C
 DRILLING RIG INSTRUMENTATION
ANCHOR TYPE WEIGHT INDICATORS ANCHORS FOR E, EB, 125 & 150 WEIGHT
FOR THE LARGEST RIGS INDICATOR SYSTEMS
The National Type EB, for Type E or Type
Type E/Series AWE with deadline loads of 75,000 Ib.
EB Weight Indicators, with E80 Tension
for 6, 8, 10 and 12 lines strung. Load Sensor. Mounts on floor or
Type EB/Series AWE with deadline loads of 100,000 Ib. substructure. Type E System designed for
for 8, 10, 12 and 14 lines strung.* Type
EB 1-1/4", 1-3/8", and 1-1/2" wireline sizes.
Type 125/Series AWE with deadline loads of 125,000 Ib. Type EB Systems designed for 1-1/2" and
for 8,10,12 and 14 lines strung.* 1-5/8" wireline sizes. Drum diameter 28".
Type 150/Series AWE with deadline loads of 150,000 Ib. Net weight 1560 Ib.***
for 10, 12, 14, and 16 lines strung.** The Hercules Model HA 131T, for Type E
Type 200/Series AWE with deadline loads of 200,000 Ib. or Type EB Weight Indicators, with E80
for 10,12, 14, and 16 lines strung. Tension Load Sensor. Mounts on floor or
*Optional 16 lines on request **Optional 8 lines on request substructure. Type E System designed for
1-1/4", 1-3/8", and 1-1/2" wirelines. Type
New Stainless Steel Driller's Panel 1 Model EB Systems designed for 1-1/2" and 1-5/8"
A10600A, with space for six gauges or HA 131T wirelines. Drum diameter 28". Net weight
meters plus weight indicator. 1460 Ib.**
The Hercules Model HA 120T, for Type E
or EB Weight Indicators, with E551
Compression Load Sensor. Designed for
Model 1-1/4", 1-3/8", 1-1/2" and 1-5/8"
HA 120T
wirelines. Drum diameter 28". Net weight
1475 Ib.***
The Hercules Model HA 130T, for Type
Type E (typical)
125 Weight Indicator, with E551
AWE Series Compression Load Sensor. Designed for
Weight Indicator 1-1/2", 1-5/8" and 1-3/4" wirelines. Drum
Model diameter 31". Net weight 2200 Ib.***
• Helps driller maintain consistent weight on bit to drill faster, more HA 130T
The Hercules Model HA 150T, for Type
efficiently and more economically.
150 Weight Indicator with E551
• Available as separate unit or, for greater convenience, mounted in Compression Load Sensor. Designed for
driller's console with a choice of the following instruments: mud 1-5/8", 1-3/4", 1-7/8" and 2" wireline
pump pressure gauge, mud pump stroke meter (SPM), rotary table sizes. Drum diameter 36". Net weight
meter (RPM), electric torque meter, tong-torque gauge, automatic
3050 Ib.***
driller.
Model ***Wireline size must be specified when
• Cuts down on time consuming fishing jobs; detects stuck pipe, HA 150T ordering.
tight holes.
• Systems available in pound, kilogram and decaNewton models.
• Gauge consists of: outer dial for direct reading of weight on bit,
• System consists of weight indicator and wireline anchor with load
inner dial for total hook load.
sensor.
• Equipped with vernier bit weight indicator for 4:1 sensitivity,
greater accuracy. To order: Specify size of rig, derrick capacity in pounds, size of
drilling wireline, number of lines strung.
• Anchor secures deadline, with load cell mounted in anchor to
produce precise weight signals. These signals are transmitted
instantly to the gauge mounted in front of the driller.
ANCHORS FOR D WEIGHT
• Compatible with either National or Hercules deadline anchors. INDICATOR SYSTEMS
The National Type D, for Type D Weight
ANCHOR TYPE WEIGHT INDICATORS Indicator, with E80 Tension Load Sensor.
Mounts on floor or substructure. Designed
FOR LARGE RIGS for 1", 1-1/8" and 1-1/4" wireline sizes.
Type D Drum diameter 24". Net weight 1080 Ib.**
Type D/Series AW with deadline loads The Hercules Model HA 129T, for Type
of 50,000 Ib. for 6, 8, 10 and 12 lines D Weight Indicator, with E80 Tension Load
strung.
Sensor. Mounts on floor or substructure.
Designed for 1", 1-1/8" and 1-1/4"
Model wirelines. Drum diameter 24". Net weight
HA 129T 810 Ib.***
The Hercules Model HA 119T, for Type
D We i g h t I n d i c a t o r, w i t h E 5 4 3
Compression Load Sensor. Mounts on
floor or substructure. Designed for 1", 1-
1/8" and 1-1/4" wireline sizes. Drum
Model
HA 119T diameter 24". Net weight 820 Ib.***
Type D
AW Series ***Wireline size must be specified when
ordering.
Weight Indicator
 WEIGHT INDICATORS

DEFLECTION TYPE (DT101)

• WAGNER INSTRUMENTATION 2000's Deflection
type weight indicator is ideal for use with small to
medium drilling and workover rigs.
• Unit is portable, rugged, and dependable. Ready to
be placed on the drill line right out of the box.
• Deflection type load cell may be used on wire line
sizes 7/8" - 1 1/4".
• The system comes with self-contained steel box.
Weight indicator head is complete with 10 dial set
for use with different wire line sizes and lines
strung, 25 ft hose assy, and deflection type loadcell
with c-clamp.
• Available in English and Metric divisions.
HOW TO ORDER
• SPECIFY SINGLE LINE LOAD CAPACITY
• SPECIFY SIZE AND NUMBER OF LINES
• SPECIFY SCALE NEEDED (LBS, KGS, dANS)

MINI WEIGHT INDICATOR (WBD100 )

• For use with small drilling and production rigs up to
30,000 Ib single line load.
• System comes with 6" or 8.5" gauge mounted in
rugged metal box, 25 ft hose assy with disconnects,
and either piston or diaphragm type load cell.
• Available in English and Metric divisions.
• Dual dial faces available. Common reeving pat-
terns of 2/4, 4/6, 6/8.
• Load cell attaches to rig floor with a universal clevis
or shackles which eliminates the use of an anchor.
HOW TO ORDER:
• SPECIFY RIG SIZE AND NUMBER OF LINES STRUNG
• SPECIFY SCALE NEEDED
• SPECIFY HOSE LENGTH (25 FT STANDARD)
• SPECIFY TYPE OF LOAD CELL REQUIRED
ROTARY TORQUE SYSTEMS
ROTARY TORQUE SYSTEM-CHAIN (RT100)
• WAGNER INSTRUMENTATION 2000's Rotary torque
system is designed to help the driller during coring, milling,
and reaming operations. The system also helps avoid twist-
offs and increases bit life by showing the driller when the
drill string is torquing to unsafe levels.
• System is comprised of 6" fluid filled gauge with bracket, 2 ft
and 14 ft hose assys with disconnects, and idler assy with
wheel
• Systems available in box and panel mount versions
• Gauge capacities measured in points and are a relative
indication of torque
HOW TO ORDER
• SPECIFY CHAIN SIZE OR WHEEL
• SPECIFY 500 POINT OR 1000 POINT GAUGE
• SPECIFY PANEL OR BOX MOUNT
• LENGTH OF HOSES (IF OTHER THAN STANDARD LENGTHS)

TONG TORQUE SYSTEMS

UNIVERSAL TONG LINE PULL (TT100)
• Systems are designed to give accurate readings for makeup
and breakout torque.
• System comprised of 6" fluid filled gauge with bracket, 25 ft
hose assy, and tension cylinder with shackles
• Systems available in box mount and panel mount versions
• Capacities up to 25,000 Ibs
• Available in Ibs, kgs, and in dual scale configurations
HOW TO ORDER
• SPECIFY CAPACITY AND SCALE NEEDED (ENGLISH OR METRIC)
• PANEL OR BOX MOUNT

POWER TONG SYSTEMS (TT101)

• Systems are designed to indicate accurate torque on each
joint of pipe
• System comprised of 6" fluid filled gauge with bracket, 5 ft
hose assy cylinder type or compression load cell, and
shackles if required
• Systems available in box mount and panel mount versions
• Available in ft/lbs, kg/m, and dual scale configurations
HOW TO ORDER
• SPECIFY CAPACITY AND HANDLE LENGTH
• SPECIFY TYPE AND SIZE OF LOAD CELL NEEDED
• SPECIFY PANEL OR BOX MOUNT
• LENGTH OF HOSE (STANDARD HOSE LENGTH IS 5 FT)
MUD PRESSURE SYSTEMS

SINGLE POINTER (MG100)

• WAGNER INSTRUMENTATION 2000'S single
pointer mud pressure system is designed to read
pressure up to 15,000 psi. The system uses 1502
and 2202 hammer unions with diaphragm protec-
tors, piston isolators, or deboosters to separate
mud, cement, and the like from system internal
parts.
• Gauge fluid filled and calibrated 360°
• Standard capacities 3,000 psi, 5,000 psi, 6,000 psi,
10,000 psi, and 15,000 psi along with their metric
equivalents
• Available in box and panel mount versions
• Hose lengths up to 50 ft
HOW TO ORDER
• SPECIFY CAPACITY & LENGTH OF HOSE
• SPECIFY BOX OR PANEL MOUNT
• SPECIFY TYPE OF SENSOR

4:1 COMPOUND (MG101)

• The dual pointer mud pressure system is designed to
read pressure up to 16,000 psi. The dual movement
allows for monitoring large and small pressure
changes. The unit is primarily used on service trucks
used in high pressure cementing and fracturing.
• It uses rugged diaphragm protectors, 1:1 piston
isolators, and 4:1 deboosters to separate drilling
mud, chemicals, and cement from the internal parts
of the system.
• Gauge fluid filled and calibrated 360° with second-
ary 4:1 pointer showing smaller pressure changes
• Standard capacities 4,000 psi, 8,000 psi, 12,000
psi, 16,000 psi and their metric equivalents
• Available in box and panel mount versions
• Hose lengths up to 50 ft
HOW TO ORDER
• SPECIFY CAPACITY OF SYSTEM AND HOSE LENGTH
• SPECIFY TYPE OF SENSOR
• SPECIFY PANEL OR BOX MOUNT
RECORDERS
DRILLING RECORDER (WDR)
• WAGNER INSTRUMENTATION 2000's Drilling
Recorder is a tough, reliable drill floor recorder
which is designed to monitor 6 to 7 different
functions.
• The recorder is completely mechanical, no
electrical power is needed.
• Chart drive is run by a durable 12 hour or 24
hour clock assy.
• Impulses are recorded clearly by self-contained
ball point pens while a high grade carbon paper
records a duplicate copy.
• The unit is easily operated and maintained with
on-site personnel.
• The recorder is easily hooked up to existing
instrumentation through the use of high-quality
disconnects.
HOW TO ORDER
• SPECIFY THE NUMBER OF FUNCTIONS TO BE
RECORDED AND WHAT THE FUNCTIONS ARE
• SPECIFY TYPE OF WEIGHT INDICATOR USED
AND WHETHER THE WTIND IS ANCHOR OR
DIAPHRAGM TYPE
• SPECIFY PUMP PRESSURE CAPACITY
• SPECIFY ROTARY TABLE TYPE-CHAIN DRIVEN OR
TOP DRIVE

PRESSURE RECORDERS (R100)

Rugged & dependable 1,2, & 3 pen recorders to
record weight, torque, and pressures up to
16,000 psi.
• 6" fluid filled gauges are used in the recorders
which makes operation and maintenance a
breeze.
• Recorder tubes use a standard 6" tube assy for
ease of maintenance and calibration
• Standard 12" chart paper is used along with
disposable felt tip pens
• Metric equivalents are available
• Manual wind and multi-speed electric clocks
available
HOW TO ORDER
• SPECIFY PRESSURE RANGE OR CAPACITY TO BE
RECORDED
• SPECIFY TYPE OF CLOCK & SPEED
• SPECIFY WALL MOUNT OR PORTABLE
HYDRO-MAST WEIGHT INDICATORS

FAST, EASY LOAD CONTROL

FOR SERVICE UNITS.
The easiest/ most versatile way for a well
servicing operation to control hook load
while running a double-fast-line or swab-
bing with a sand line, is with a Hydro-Mast
Weight Indicator.
This reliable hydraulic system will read
weights of up to 360,000 Ib., whether the
deadline is fastened to an anchor, traveling
block or crown. It's ideal for any well
servicing rig.
The system consists of an indicator, one or
two-pad compression-type load cells
(depending on the type of mast), intercon-
necting hydraulic hoses with quick-
disconnect fittings at the gauge end, plus
hydraulic fluid for the instrument and a Hydro-Mast Weight Indicators are available for operations up to 360,000 Ib.
hand pump. It is completely calibrated,
sealed at the factory and comes ready to Two smaller gauges provide the weight of each pad to help
install and use. the operator equally distribute the load. Thus, an integrator
When installed, the Hydro-Mast Weight provides the signal to the large gauge. Choose from capaci-
Indicator will detect the slightest weight ties in ranges of: 0-50,000, 0-100,000, 0-150,000 and 0-
change. Such activity will cause the com- 240,000 Ib.'
pression load cell to generate a hydraulic Type HM-8-2, also a two-pad system, features a larger 8%
pressure signal which travels through the inch main gauge which utilizes a zero-adjust dial with two
connecting hose to the Bourdon tube of the pointers. One pointer indicates hook load while the 4:1 ratio
gauge. Tube movement drives the single vernier provides a magnified indication of the slightest hook
and/or dual pointer indicator. load changes. Capacities are available in ranges of: 0-
THREE CONFIGURATIONS THAT 120,000, 0-150,000, 0-160,000, 0-240,000, 0-300,000 and
0-360,000 Ib.
MEASURE UP.
Type HM-6-1 is a single pad load cell
DESIGNED FOR PRECISION, BUILT TO LAST.
system with a zero-adjust six-inch gauge The Hydro-Mast Weight Indicator provides accurate readings
and adjustable damper. The target pointer over its long service life. All systems are housed in a heavy-
can be set for the maximum weight desired. duty steel box with removable front and back doors to protect
The single load cell senses the total weight the gauges during shipment, installation and removal. A two-
of the mast and hook load, and it relays the inch diameter coupling is welded to the bottom of the cabinet
hydraulic signal to the weight gauge. This for mounting on a pipe stand for increased visibility.
system is available in ranges of 0-25,000,
0-50,000, 0-100,000 and 0-150,000 Ib. Additionally, these DICKS gauges are fluid-filled to lubricate,
prevent rust, soften vibration and avoid fogging.
Type HM-6-2 is a two-pad load cell system.
The indicator has one six-inch gauge with a Contact a DICKS Representative for proper application
hook load pointer and adjustable target information.
pointer.
 COMPOUND PRESSURE
INDICATOR SYSTEM
GM4 and GM4P Series
Takes the guesswork out of Fracturing, Acidizing, Cementing or Mud Pressure Indication

• Used primarily for monitoring pump pressures on service trucks engaged in

cementing, high pressure hydraulic fracturing operations or acidizing
operations involving downhole stimulation of oil pay formations.
• Dual dial is ideal for these operations since pressures in these processes range
from high to low depending upon the kind of pay formation being treated.
• Compound gauge has two pointers.
• Dial has 4:1 vernier reading for indicating small pressure changes, such as
formation breakdown or plugging of perforations, fractures, etc.
• Vernier pointer makes four complete revolutions for full capacity of gauge,
giving four times more resolution for same pressure change.
• Standard pointer is full 360° sweep of capacity of dial.
• System consists of pressure gauge with dual dial, high pressure hose and
diaphragm protector assembly.
• Gauge mounts in any convenient location for easy visibility. Usually mounted
near truck mount recorders on service truck.
• Fluid-filled gauge dampens most truck vibrations and adjustable damper
controls pump oscillations.
• Pulsation damper, located at top of gauge, can be used to reduce pointer
How the Compound Pressure Indicator works
movement to steady, even action.
• Pressure gauge receives its signals through high pressure hose from Example: The compound gauge shown
diaphragm-type protector assembly, here has a 16,000 psi capacity. The inner
• Diaphragm, mounted on any 2" connection, is equipped with rubber cup which dial has a yellow pointer which indicates Second Third
separates pump fluid from hydraulic fluid which actuates the gauge. psi; each increment shown represents Thousand Thousand
1,000 psi. One complete revolution of the PSI PSI
• May be substituted for standard mud pump pressure gauge (GM6A).
inner dial yellow pointer indicates 16,000
• Has all of the advantages of standard pump pressure gauges.
psi. The outer dial has a red pointer which
• Can be easily recorded on either hydraulic circular recorders or electronic
indicates psi; each increment shown
remote strip recorders.
represents 100 psi. One complete
revolution of the outer dial red pointer First Fourth
Thousand Thousand
indicates 4,000 psi. PSI PSI

1,400 PSI 2,400 PSI

Inner pointer on 1, Inner pointer on 2,
Pressure Indicating Manifold System red outer pointer on red outer pointer on
with two indicators and gauge 400 = 1,400 psi reading. 400 = 2,400 psi reading.
protector sensors.

PRESSURE INDICATING MANIFOLD

• Provides two indications: annulus pressures and tubing and drill pipe 3,400 PSI 4,400 PSI
Inner pointer on 3, Inner pointer on 4,
pressures. Ideal for drill stem testing, cementing or acidizing operations. red outer pointer on red outer pointer on
• Pressure signals relayed to gauge indicators for convenient remote readouts. 400 = 3,400 psi reading. 400 = 4,400 psi reading.
Gauges and hoses housed in light carrying case.
• Compound vernier-type gauges with long pointer movement provide optimum
resolution of small pressure changes. Capacity is up to 16,000 psi.
To order—Specify capacity and application.
For additional information request pressure indicating manifold information.
 Oilfield Instruments
Sales & Service

Automatic Bit Weight Control System

www.dicksoilfield.com

3110 FM 1936 24 Hour (432) 381-6565

P.O. Box 69092 Toll Free (877) 381-6565
Odessa, Texas 79769 Fax (432) 381-9428

SALES & RENTAL OF

DRILLING & WELL SERVICE
INSTRUMENTATION

NEW & REBUILT

SATELLITE AUTOMATIC DRILLERS

WEIGHT INDICATORS (All Brands)
FOOTAGE RECORDERS
MARTIN DECKER/EASTMAN
DEVIATION INSTRUMENTS
GAUGES: Pump, SPM,RPM, Torque
PUMP PRESSURE RECORDERS
ROTARY TORQUE SYSTEMS
TONG TORQUE SYSTEMS
SUPPLIES FOR ALL EQUIPMENT
MISCELLANEOUS SUPPLIES
H2S APPROVED
FULLY INSURED

Dick Garlets Bryan Hitchcock

Owner Sales Manager