Marichem Chemicals
Marichem Chemicals
Marichem Chemicals
v
f"r-\ F.O.T. 10 41
F.O.T. C-100 43
FUEL BTOCONTROL ............................... 45
sooT cLEANER ................ 47
SOOT CLEANER LIQUID 49
SECTION C : MAINTENANCE
PABTI:TANKCLEANERS
ALCACLEAN H.D. ............ 53
CEMENT REMOVER 55
LtME C1EANER .............. 57
MARTCHEM P.C.S. ......... 59
MARTCHEM T.T.C. ......... 61
TANK CLEANER 63
TANK CLEANER S ........... 65
PART ll : MAINTENANCE
AtR COOLER CLEANER ..'................... 71
AIR COOLER CLEANER L.T. ...,......... 73
ALCACTTVE L|QUtD ...........:......... 75
BIOACTIVE POWDER 77
BUFFERSOL 79
CARBON REMOVER 81
CHLORIDE TABLETS 83
DESCALER LIQUID 555 ............. 85
DESCALER POWDER 87
ELECTROCLEAN A QUICK DRY ............ 89
ELECTROCLEAN B 91
ELECTROCLEAN SUPERFAST ............ 93
ffi MARTcHEM'
FILTER CLEANER . .. ... 95
FOAM PLUS ... .... 97
GENERAL CLEANING AND SOLVENT .,........",...., ,...., 99
HAND CLEANER .... . . .. ..... ........". ..,". i01
LIQUID SOAP ......... ...."..........:... .. .... 103
MARICHEM OIL SPILL DISPERSANT .,. 105
MARICLEAN DG.25 . ,... ". 109
MUD CONDTTTONEF ... ............. 111
OIL AND GREASE REMOVER HD 999 . .... 113
OIL SPILL EMULSIFIER . 1]5
PASSIVATION LIQUID .. 119
PtcKLtNG LtOUtD . .......... 121
PICKLING PASTE ... 123
PURIFIER DISC CLEANER ... .,........ ..... 125
RUST RETMOVER ............. 127
RUST SHIELD PHOS , .. 129
SANITATION A.CLEANER .........,... 131
SOLBREAK . .. 133
SECTION D r COATINGS
MARICOTE ALOX .....,... tJ5
PLASTIC COATING IJ/
STRONG PLASTIC RESISTANT 147
PARTI:TESTKITS
BOILER WATER TREATMENT IESI K'TS
ALKALINITYTEST KIT ....., 151
WT ALKA TEST KIT ..,.....,. 153
CHLORIDE TEST KIT ....... 155
WT CHLORITEST KIT ,..... 157
PHOSPHATE TEST KIT ... 159
WT PHOSP TEST KIT ....... 16.I
SULFITE TEST KIT .......,... 163
WT SULFITEST KIT ......... 165
D.C.W.T. IESI KIIS
CHLORIDE TEST KIT ....... 169
" WT CHLORITEST KIT ....,. 171
NITRITE TEST KIT , ....,,.,... 179
FUEL OIL - LUBE O't IESI K'IS
MARTCHEM T.B.N. TEST KtT .............. ....................... 177
MARICHEM WATER IN OIL TEST KIT ....,........, ..,.,.... 179
EQUIPMENT
DOSING SYSTEM ...,.,,..,.. 183
pH MEASURING TAPE .... 185
m,
L-? i
&a'Y
SEGTION G : ARG lltlELDlNG MACHINES AND ACGESSORIES
IT
MARTGI{EM.
PART I
BOILER WATER TREATMENT
ALKALINITY GONTROL'"
DESCRIPTION APPLICATION AND USE
ALKALINITY CONTROL is a concentrated A. Dosing Procedure
alkaline solution recommended for boiler water Dosage is proportional to p-Alkalinity andlor
treatment. It prevents corrosion and assists in pH. A proper level bf treatment is maintained
converting the hard scale deposits to a soft and by testing for p-Alkalinity. For instance, a
non-sticking mud. Furthermore, it is used as a 100m1portion of ALKALINITY CONTROL in
neutralizing product against other acidic in na- one ton of water raises alkalinity by 50-60 ppm
ture cleaning products. as CaCO3. Initially, use 150m1 of ALI(ALINI-
TY CONTROL per ton of water. Note that high-
ADVANTAGES AND CHARACTERISTIGS
pressure boilers and water boilers should sus-
- Efficient in the prevention of corrosion. tain a 100 -150 ppm as CaCO3 concentration.
- Ideal for salt-scale control.
- Can be combined with other products. B. Testing Procedure
- Easy to apply and use. 1. Test water sample from the water boiler as
- Achieves optimum results regarding natural described in the directions of MARICHEM
oils and fats. ALKALINITY TEST KIT oT WT ALKA TEST
KIT.
PHYSICAL PROPERTIES 2. Determine the present alkalinity value ex-
ALKALINITY CONTROL is a Sodium pressed as ppm CaCO3.
Hydroxide solution exceptionally alkaline. This 3. Consult the test result table, as shown in the
inorganic, non-volatile alkali attacks Alu- MAzuCHEM ALKALINITY TEST KIT oT WT
minum, Zinc,Magnesium and Tin. There is no ALKA TEST KIT manual, this will advise on
known effect on rubber and plastic. dosage per ton needed, to reach the desired
When dissolved, with any proportion of water, level of 100-150 ppm as CaCO3.
heat may be released. 4. A controltest for the alkalinity of the water
should be conducted after 3-6 hours from the
Appearance / Color Clear, colorless liquid application
Specific gravity r.25l15'c
pH t4 G. Feeding Procedure
Odor Odorless Low-Pressure Boilers (up to 28 bars)
Dissolve the desired volume of ALKALINITY
PACKAGING CONTROL into 5 litres of feed-water, which
No
Order Size (in litres) Coniainer should then be passed through the recalculating
67300t 30 Plastic jerrican or the main feed pipe into the stream or the hot
welltank.
High-Pressure Boilers (28 to 60 bars)
Dissolve the desired volume of ALKALINITY
CONTROL into 5 litres of feed-water, which
then should be passed to the stream or water
drum through the chemical pump.
*w,
W MARICHEM'
W
13
BOILER WATER TREATMENT
Read the Material Safety Data Sheet before using this product.
For detailed information on safety and health, please rejer to Material Safety Data Sheet and/or Producl Label.
MARICHEM MAzuGASES Worldwide Services or any subsidiary or associated cornpanies warranties of merchantabil-
iry and competence, if any, along with any expressed warranties conceming this rnerchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of tlre good explained herein. Merchandise rnight vary insubstantially depend-
ing on country of origin. The information provided concerring merchandise is exclusively presented to the customer.
t4
BOILER WATER TREATMENT
\.j
BOILER SLUDGE CONDITIONER''
DESCRIPTION APPLICATION AND USE
BOILER SLUDGE CONDITIONER is a prod- A. Dosing Procedure
uct to be used in situations where the boiler wa- Regularly, a volume of 100 ml of the BOILER
ter is contaminated with oil. SLUDGE CONDITIONER should be applied
This high performance product is applicable to for every ton of water capaciry where oil con-
both medium and low-pressure steam boilers in tamination exists.
order to prevent sludge deposits. However, in systems where severe oil contami-
ADVANTAGES AND CHARACTERISTICS nation exists, off-line cleaning is required
before the product can be applied.
- Drives to the coagulation of the oil droplets Thereafter, the application should be repeated
and their removal by blow-down.
daily, for a period of two weeks, until oil re-
- May be combined with other boiler water moval is complete.
treatment products.
- Efficiently prevents the deposition of sludge. B. Feeding Procedure
- Easy to apply and use. Feed directly to the boiler by using a bypass pot
feeder or a suitable chemical injection pump.
PHYSICAL PROPERTIES For low-pressure boilers the solution may be
BOILER SLUDGE CONDITIONER is a white applied to the hot well or the condensate retum
high molecular weight solution. It is hy- tank.
drophilic and of low causticity. Note that BOILER SLUDGE CONDITIONER
Appearance / Color White, viscous liquid can be applied as it is or dissolved with other
Specific gravity 0.85/i5"C boiler treatment products.
pH 8
Odor Odorless
PACKAGING
Order No Size (in litres) Container
673002 30 Plastic jerrican
ffi MARIGHEM. 15
BOILER WATER TREATMENT
Read the Material Safety Data Sheet before using this product.
For detailed information on saJbty and health, please refer to Material Sa'/b1, pq1., Sheet and/or Produc't Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies r'varranties of merchantabil-
ity and competence, if any, along with any expressed wamanties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to irn-
pending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
16
BOILER WATER TREATMENT
\i
B.W.T. NEW FORMULA'"
DESCRIPTION APPLICATION AND USE
B.W.T. NEW FORMULA is an innovative A. Dosing Procedure ii
product applied to all types of boiler systems Initially, use 1 litre of B.W.T. NEW FORMU-
for water treatment. It provides excess protec- LAper ton of water. Thereafter, a volume of 50-
tion from the hard salts, sludge concentration 60 ml per ton of water should be used daily.
and corrosion, whilst also removing dissolved For optimum results, consult the MARICHEM
oxygen (even at high and low temperatures). Ship's Chemical Log Book for boiler water
Furthermore, it acts as an antifoam agent. treatment on a daily basis.
Note that the boiler water sample analyses must
ADVANTAGES AND CHARAGTERISTICS be conducted daily by using the MARICHEM
- One product does it all: a multi-functional ALKALINITY oT WT ALKA, PHOSPHAIE
completed treatment. or WT PHOSP and SULFITE or WT SULFI
- Prevents salt corrosion through hardness con- TEST KITS.
tro1.
- Acts as an oxygen scavenger in boiler water
B. Feeding Procedure
as well as a corosion inhibitor. Once the dosing quantity is determined, B.W.T.
- Raises the pH level. NEW FORMULA must be introduced to the
- Acts as an antifoam agent. boiler's water, continuously, by a metering
- Submerges suspended solids thus assisting to pump or by a more conventional method such
easy and suflicient blowdown. as metallic container, plastic pail, etc.
- Efficiently protects boiler surfaces.
- Cost effective, easy to handle and apply.
PHYSICAL PROPERTIES
B.W.T. NEW FORMULA is a liquid solution of
alkaline compounds, oxygen binders, corrosion
inhibitors, sludge conditioners and antifoam
agents.
PAGKAGING
No
Order Size (in litres) Container
673003 30 Plastic jerrican
ww,
W MARIGHEM. t7
BOILER WATER TREATMENT
Read the Material Safety Data Sheet before using this product.
For detailed information on safety and health, please refer to Material SafeQ Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties conceming this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to im-
pending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
18
MARICHEM BOILER WATER TREATMENT
\,
B.W.T. POWDER'"
DESCRIPTION APPLICATION AND USE
B.W.T. POWDER is the equivalent powder A. Dosing Procedure
product of B.W.T. NEW FORMULA. Initially, use 200 gr of B.W.T. POWDER per
It is applied to all types of boiler water systems, ton of water. Thereafteq a regulated portion of a
providing excess protection from the hard salts, concentrated solution must be introduced daily
sludge concentration and cortosion. Moreover, or at least every 2 days.
this competent product removes dissolved oxy- For optimum results, consult the MARICHEM
gen and acts as an antifoaming agent.
Ship's Chemical Log Book for boiler water
treatment on a daily basis. Always remember
ADVANTAGES AND CHARACTERISTIGS that the desired quantity of B.W.T. POWDER
- One product does it all: a multi-functional should be dissolved in 1:10 proportion with hot
completed treatment. water before applying to the well hot tank.
- Prevents salt corrosion through hardness con- Note that the boiler water sample analyses must
trol. be conducted daily by using the MARICHEM
- Acts as an oxygen scavenger in boiler water. ALKALINITY oT WT ALKA, PHOSPHAIE
- Raises the pH level. or WT PHOSP and SULFITE or WT SULFI
- Acts as a coffosion inhibitor. TEST KITS.
- Acts as an antifoaming agent.
B, Feeding Procedure
- Submerges suspended solids thus assisting to
Once the desired quantity of B.W.T. POWDER
easy and sufficient blow down.
- is determined, dissolve the powder as described
Efficiently protects boiler surfaces.
above and feed the solution to the boiler's water
- Cost effective, easy to handle and apply.
through the well hot tank by means of a meter-
ing pump or a more conventional method, such
PHYSICAL PROPERTIES
as a metallic container, plastic pail, etc.
B.W.T. POWDER is a dry powder product con-
sisting of alkaline compounds, oxygen binder,
corrosion inhibitors, sludge conditioners and
antifoam agents.
PAGKAGING
No
Order Size (in kgrs) Container
675003 50 Plastic drum
{,;;*
W MARIGHEM' 19
BOILER WATER TREATMENT
Read the Material Safety Data Sheet before using this product.
For detailed information on safety and health, please refer to Material Safety Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competen'ce, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to im-
pending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided conceming merchandise is exclusively presented to the customer.
20
BOILER WATER TREATMENT
MARIGHEM C.C.I.''
DESCRIPTION APPLICATION AND USE
MARICHEM C.C.I. is an alkaline liquid com- A. Dosing Procedure
pound of high standards and qualiry designed MARICHEM C.C.I. must be applied dally at an
to act as a condensate corrosion inhibitor in the indicated volume of 100 ml per 1 ton of boiler
condensation return lines of the boiler. water per day.
Note that per day dosing is a must in order to
ADVANTAGES AND CHARACTERISTIGS keep the pH level under control.
- Neutralizes acidic conditions throughout the
B. Feeding Procedure
condensate in feed water systems and steam
transfer. MARICHEM C.C.L must be fed, by means of a
- Controls water pH in the range of 8.0-9.0. metering pump, in the boiler at any of the fol-
- It is boiled off with water into the steam pipes lowing points:
and due to its alkali character protects directly - Condensation pump discharge.
from surface corrosion. - Deaerator storage tank.
- Very stable and cannot be absorbed by water. - Hot well tank.
- Can be combined with a range of other prod- - Condensation return tank.
ucts.
- Cost effective, easy to apply and use.
PHYSICAL PROPERTIES
MAzuCHEM C.C.I. is a concentrated, volatile
alkaline solution that controls corrosion by neu-
tralizing contaminants, such as carbonic acid
which is formed by dissolved carbon dioxide in
evaporating water.
PACKAGING
No Size (in litres) Container
Order
673006 30 Plastic jerrican
dwph
W MARICHEM'
@
21
BAILER WATER TREATMENT
Read the Material Safety Data Sheet before using this product.
For detailed information on safety and health, please refer to Material Safety Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties conceming this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to im-
pending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
))
BAILER WATER TREATMENT
OXYCONTROL'"
DESCRIPTION PACKAGING
OXYCONTROL is a liquid catalyst compound No
Order Size (in litres) Container
which reacts instantly with dissolved oxygen in 673008 30 Plastic jerrican
water thus protecting the boiler from oxygen
APPLIGATION AND USE
corrosion. The highly eflicient results achieved,
are based on its reaction time and its ability to A. Dosing Procedure
bind, to absorb and to counteract the dissolved Initially, a volume of 1.2 litres per ton of
the
oxygen, even at low temperatures. Additionally, boiler's water must be used for a period of 48
OXYCONTROL is applicable to all steam gen- hours. Thereafter, a dose of 300 ml per ton of
erating and water systems, when the neutraliz- water is sufficient to use on a daily basis.
ing of dissolved carbon dioxide is required. However, dosage may be increased or de-
creased based on test results.
ADVANTAGES AND GHARAGTERISTICS
B. Sampling and Testing
- Protects against oxygen corrosion and can be
used at low temperafures. To achieve optimal results, it is importantto ad-
- Very efficient and rapid oxygen scavenger. just the treated water andmaintain boiler condi-
- Can be used in combination with a number of tions by testing water samples on a daily basis
other treatment products. or at the very least, every three days with the
- Safe to use on any steam generators and steam MAzuCHEM SULFITE oT WT SULFI TEST
boilers experiencing dissolved oxygen satura- KIT, depending on the adjustment period to
tion. maintain stable sulfite concentrations in the
- Cost effective, easy to handle and apply. boiler's water.
The water samples must always be taken from
PHYSICAL PROPERTIES the same origin found in the middle of the boil-
OXYCONTROL is a concentrated liquid sul- er after blow down has occurred. Keep in mind
fite compound with a specialized catalyst for that before testing, the water samples must be
oxygen binding. left to cool at room temperature. Thereafteq the
results may be evaluated according to the OXY-
Appearance / Color : Clear, colorless liquid
CONTROL TESTING CHART found below.
Odor : Odorless
Specific gravity : 1.1/15'C G. Feeding Procedure
pH :10 OXYCONTROL must be fed into the boiler's
PACKAGING feed pump suction line or into the hot well tank,
Order No Size (in litres) Container continuously, by means of a metering pump.
673008 30 Plastic jerrican Other conventional ways may also be used.
However,.direct feeding to the boiler is strong-
O)flCONTROL TESTING CHART ly not recommended.
Boiler Pressure OXYCONTROL Range in ppm as NazSO:
0-450 PSI 0-20 2044 30 and over
450-850 PSr 0-10 10- 15 15 and over
Increase Dosage Satisfactory Decrease Dosage
Results
25% Dailv Rate 2s%
Jffi
Le MARICHEM
W.
23
BOILER WATER TREATMENT
Read the Material Safety Data Sheet before using this product.
For detailed information on safety and health, please refer to Material Safety Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to im-
pending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
24
BOILER WATER TREATMENT
PHOSPHATE"
DESCRIPTION &pp[-B#AT*SN ,&$SS UsH
PHOSPHATE is a highly soluble, powder com- A. Dosing Procedure
pound significantly effective for the reduction Initially, for an average boiler of 10 ton water
of hardness and scale control in all types of capacity, a quantity of 350-650 grs must be
boilers. The specific purpose is to remove all used. It is important to note that no more than
calcium hard salts by blow down to a non-con- 100-250 grs of PHOSPHATE will ever be
sistent soft sludge, whilst maintaining a natural required on a daily basis, especially when the
level of phosphate concentration in the boiler's boiler operates with distilled water make-up.
water. This way proper hardness regulation is
B, Sampling and Testing
assured.
Water samples must be drawn and tested peri-
odically, using the MARICHEM PHOSPHATE
ADVANTAGES AND CHARAGTERISTICS TEST KIT or WT PHOSP TEST KIT. To deter-
- Highly soluble, unlike ordinary sodium phos- mine if use of PHOSPHATE is required, please
phates that experience a low solubility at high consult evaluation chart and dosing procedure
temperatures. below.
- Maintains a regular phosphate balance, result- Each sample should be taken every 24 hours
ing in efficient hardness control. from the special sampling valve.
- Removes calcium hardness by blow down. If this is not possible, the samples should be
- Cost effective, easy to apply and use. taken from a point which can provide a repre-
sentative sample of the entire system. Keep in
PHYSICAL PROPERTIES mind, that this same point must be used for the
regular testing, thereafter.
PHOSPHATE is a dry powder product, which
contains a selected sodium phosphate deriva- G. Feeding Procedure
tive especially formulated to provide efficient Once the quantity of PHOSPHAIE necessary to
hardness control. apply has been determined, the engineer must
Appearance/Color : White, thin granulated dissolve it in hot water at a ratio of ll20 ( I part
powder of phosphate to 20 parts of water).
Phosphate content : Approximately 95o/o
Afterwards, feed to the boiler via a by-pass
pH (10% Aqueous Solution) : 8-9 feeder or a chemical pressure feed pump.
In the situation where several boilers are
involved, separate feed lines must be installed
PACKAGING for each one in order to ensure that every boiler
No
Order Size (in kgrs) Container receives the right quantity for treatment.
675009 50 Plastic drum
MARTcHEM'
ffi 7<
BOILER WATER TREATMENT
NOTE
For sample results less than 20 ppm phosphate
concentration, supply the system with the pre-
scribed dosage as in the chart above.
For sample results greater than 40 ppm phos-
phate concentration, perform blowdown and
supply with the initial dosage prescribed below.
INITIAL DOSAGE
PHOSPHATE : 350-650 grs/10 tons of fresh
water.
Read the Material Safety Data Sheet before using this product.
For detailed information on safbty and health, please refer to Material Safety Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
it-v and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
perlinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to im-
pending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
26
7
MARICHEM,
PART II
L
l-5 I
l- s-'
J'
,,..::. 1
'
COOLI NG WATER TREATMENT
Engine manfficturers:
PACKAGING WARTSILA NSD
ALSTOM ENGINES
No
Order Size (in litres) Container
673004 30 Plastic jerrican
ffi MARTcHEM. 29
COOLI NG WATER TREAT M ENT
Read the Material Safctv Data Sheet trcforc using this product.
MARIC'HEM \,'IARIGASES Wbrldri'idc Scrvices or anv subsicliary or associated companies u,arranties olnrerchantabil-
ity and competence. if any. along rvith any erpressecl r.varrantics concernins this n.rcrchandise. shall rlot be actionable or
if
the good is r-rscd contlaril-v or clif-terer.rtly'to the directions herein and in no othel rvay due 1o im-
pertir.rent or eft-ectivc
pending hazards fi'oln inappropriate use of tl.re good e:<plained hereir.r. N,lerchandise might vary insr-Lbstantially depend-
ing on country o1'origin. Thc inlbr.ration providccl conceming rrerclrandise is exclusively presentecl to the custcxner.
30
COOLI NG WATER TREATM ENT
D.C.W.T. POWDER"
DESCRIPTION APPLICATION AND USE
DIESEL COOLING WATER TREATMENT A. Dosing Procedure
POWDER is the equivalent powder product of Initially, a quantity
of 8 kgrs per ton of distilled
D.C.W.T. - N.C.. Specifically, it has been de- or fresh water must be used.
signed to apply to all marine diesel engines for However, correct dosing can and must be deter-
the treatment of the cooling water. Furthermore,
mined, after the testing of water samples. using
it can be applied to other cooling and heating the MARICHEM NITRITE TEST KIT.
closed re-circulating water systems in order to
For optimum results, a nitrite concentration of
prevent rust and scale development.
20 to 60 ppm in the cooling system is recom-
mended.
ADVANTAGES AND CHARACTERISTICS
- Prevents corrosion and scale formation.
B, Feeding Procedure
- Prevents acid attack. After the quantity of D.C.W.T. POWDER is
- A Chromate-free product. determined and before the introduction of the
- It is not an oil compound and does not create product into the system, it must be dissolved in
foaming. sufficient volume of water until the dissolution
- Protects various metal surfaces and is com- of the powder is complete.
patible with non-metals. Thereafter, feed the solution into the expansion
- Has a very low degree of toxicity. tank or through a metering pump, these are
- Prevents scale overheating and maintains reg- responsible for the circulation of the solution
ular heat transfer. into the cooling water system.
- Compatible with glycol-based antifteeze and Moreover, the engineer has to make sure that a
sealing products. proper distribution of the solution is accom-
- Cost effective, easy to handle and apply. plished and that a protective film is created.
Only then the treatment is complete.
PHYSICAL PROPERTIES After the application and while the cooling
water system is in operation, let the solution
D.C.W.T. Powder is a Non-Chromate Nitrite
circulate for approximately 2 hours. Then, test
powder compound with a deposit modifier, pH
the Nitrite concentration in the water using the
stabilized.
MARICHEM NITRITE TEST KIT. Repeat the
Appearance / Color : Light yellow, thick
testing procedure and make up with D.C.WT.
crystalline granulated powder
POWDER solution in order to stabilize the
Specific gravity : 1.1/15'C
pH (L% solution) : 8.5-10
Nitrite concentration in the water due to
losses/leakage of the system.
Odor : Odorless
{wF
ZT MARICHEM
ww
'wee
31
COOLI NG WATER TREATM ENT
Read the Material Safety' Data Sheet before using this product.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchardlil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionablc r
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other rrarr- due to irn-
pending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantiallr dryed
ing on country of origin. The information provided conceming merchandise is exclusively presented to the custffi-
32
COOL'NG WATER TREATMENT
\i
MARICHEM S-Fe"
DESGHIPTION APPLICATION AND USE
MARICHEM S-Fe is a concentrated aqueous A. Dosing Procedure
liquid product formulated to control marine bio- The quantity of MARICHEM S-Fe is propor-
logical fouling of marine microorganisms such tional to the capacrty of seawater flow in the
as bacteria and fungi and macro organisms such
system, the desired treatment levels, the type
as bamacles, mussels and clams without harm- and kind of the system in question, the available
ing higher life forms. MARICHEM S-Fe has a downtime and the degree of contamination of
wide range of applications in all seawater cool- the system to be treated.
ing lines, seawater intakes, trimming tanks, bal- The recommended dosage is 0.9 litres of
last tanks etc. MAzuCHEM S-Fe for every 100 tons of sea-
water flowing through the system per hour. The
ASVAhETAGHS AND CHARAETEHISTICS
above mentioned dosage should be dosed dur-
- Very effective on marine biological fouling ing a one hour period and repeated every 48
control in all seawater intake systems whilst hours. The frequency of dosage may be less
protecting them from erosion and heavy scale depending on the degree of fouling.
accumulation.
B. Feeding Procedure
- Provides quick and thorough treatment.
Once the quantity of MARICHEM S-Fe has
- Safe to use on all metals and metal alloys.
been deterrnined, its application must take place
- Non-flammable, non-corrosive and non-toxic.
- No known effect on rubber or plastic com- by use of the MARICHEM DOSING SYS-
TEM, into all the main seawater suction filters.
pounds.
This is feasible to accomplish when the DOS-
- Can be combined with a rarTge of other prod-
ING SYSTEM tubing is tapped to the main sea-
ucts.
water feeding line.
- No heating is required upon application and it
Note that the DOSING SYSTEM must be posi-
is completely biodegradable.
tioned above the main seawater suction unit,
- Maintains heat transfer in the system.
over the seawater level in order to reach maxi-
- Cost effective, easy to apply and use.
mum gravity flow into the filter system while
PFiYSIGAL PRGPEM?IS$ suction is in operation.
ff@
AE MARIGHEM
W
33
COOI'NG WATER TREATMENT
Read the Material Safety Data Sheet before using this product.
For detailed information on safety and health, please refer to Material Safety Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies walranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to im-
pending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided conceming merchandise is exclusively presented to the customer.
34
MARICHEM'
PART III
MARICHEM EVAPORATOR TREATMENT
PACKAGING
No Size (in litres) Container
Order
673005 30 Plastic jerrican
a--
#:;;*i
Wt,Wrr,.
W: MARICHEM. 37
EVAPORATOR TREATMENT
Read the Material Safety Data Sheet before using this product.
For detailecl inlitrntation on safb\ and health, plettse refer to fulaterittl Sofbtt, Daltr Sheet ttnd/or Protltrc't Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
perlinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to im-
pending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of orrgin. The information provided conceming merchandise is exclusively presented to the customer.
38
FUEL TREATMENT
MARICHEM. 39
FUEL TREATMENT
Skin Contact Avoid Skin contact. Otherwise, wash contaminated area thoroughly with water.
Seek medical attention.
Inhalation Avoid inhalation of vapors. Othenv-ise, seek fresh air source at once.
Seek medical attention.
GENERAL Avoid sprllage, splashing and mishandling. Precautionary lrreasures for body
INSTRUCTIONS protection are strongly recommended before use.
Read the Material Safety Data Sheet before using this product.
For detailed information on safety and health, please refer to Material Safety Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided conceming merchandise is exclusively presented to the customer.
40
MARICHEM FUEL TREATMENT
F.O.T. 10"
DESCRIPTION APPLICATION AND USE
F.O.T. 10 is a concentrated liquid mixture of A. Dosing Procedure
organic components, which can be added to all The quantity of F.O.T. 10 suggested for treat-
marine fuel grades; it acts as a catalyst in order ment is 1 litre per 4-6 cubic meters of fuel.
to improve combustion. This proportion can vary though, it can vary
according to the quantity of the fuel to be
ADVANTAGES AND GHARACTERISTIGS treated, the operation handling procedures in
- 100% oil-soluble. progress and in particular the characteristics of
- Reduces the ignition point of fuel. the engine, as specif,red by the manufacturer.
- Prevents and disperses sludge formations thus However, these variances can be adjusted
increasing fuel flow and homogeneity. against the test results obtained and the opera-
- Reduces smoke emissions, soot development tor's experience.
and carbon/ash deposits.
B. Feeding Procedure
- Eliminates acid corrosion by inhibiting
F.O.T. 10 must be applied to the system in ques-
gaseous acids.
tion, by continuous feeding into the fuel line or
- Minimizes fuel consumption due to its
into the settling tank. In any case, the use of a
upgrading action to the fuel's quality.
metering pump is recommended; it provides the
- Can be used with a range of other products.
advantage of appropriate dispersion under stan-
- Cost effective, easy to apply and use.
dard treatment conditions.
- Overall, it provides improved fuel atomiza-
tion and increased combustion efficiency,
whilst protecting the internal combustion
parts of the engine that are coming into con-
tact with the fuel.
PHYSICAL PROPERTIES
F.O,T. 10 is a 100% ash-less, non-abrasive liq-
uid compound containing no metal complexes.
Appearance / Color Clear, colorless liquid
Specific gravity 0.85/15"C
Flash Point > 400c
Odor Strong arom.atic
solvent odor
PACKAGING
No Size (in litres) Container
Order
562002 20 Steel drum
562102 210 Steel drum
ffi MARTcHEM' 4t
FUEL TREATMENT
Read the Material Safety Data Sheet before using this product.
For detailed information on safery and health, please refer to Material Safety Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or efflective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on couttry of origin. The information provided concerning merchandise is exclusively presented to the customer.
42
FUEL TREATMENT
F.O.T. C.I00"
DESCRIPTION PHYSICAL PROPERTIES
F.O.T. C-100 is a unique product specifically F.O.T. C-100 is an ash-less, non-abrasive, 100%
designed to increase fuel energy efficiency oil-soluble, organometallic liquid compound.
upon consumption and to reduce combustion Appearance / Color : Clear, dark red-brown
deposits. This innovative formula combines liquid
superior quality ingredients, which result to its Specific gravity : 0.85/15"C
catalytic action as a fuel additive and deposit Flash Point : > 40oC
eliminator for all types of diesel engines that Odor : Strong aromatic
operate on heaqz oils. Additionally, it is engi- solvent odor
neered to eliminate heavy metal depositions
such as Vanadium, Sulfur, Lead, etc. PACKAGING
No Size (in litres) Container
Order
ADVANTAGES AND CHARACTERISTICS s62003 20 Steel drum
- Reduces low and high temperature acid corro- 562t03 2r0 Steel drum
sion.
- Reduces carbonaceous combustion deposits APPLICATION AND USE
by increasing the combustion temperature A. Dosing Procedure
enough to fragment and force them to pass out
of the engines through burning with the fuel. The proportion of F.O.T. C-100 to be used is I
- Reduces heavy metal deposits such as litre for 6-8 cubic meters of fuel.
Vanadium, Sulfur and Sodium formed by This proportion can vary though, it can vary
poor quality heavy fuels in the same way as according to the quantity of the fuel to be
the carbonaceous combustion deposits. treated, the operation handling procedures in
- progress and in particular the characteristics of
Preserves engine condition and especially
vital parts such as the exhaust spaces, the the engine, as specified by the manufacturer.
valves, the turbochargers and engine heads Therefore, in order to reach maximum results,
fiom acid corrosion and carbon ash build-up. the dose required may be linked to the above-
- Assists in the blending of different grade fuels mentioned factors when observations of the end
and the dispersion of sludge. results are considered.
- Increases fuel efficiency, this results in fuel B. Feeding Procedure
saving. F.O.T. C-100 is in fed, at a continuous rate, into
- Completely soluble in oil. the fuel tank of the fuel treatment system or into
- Can be used with a specific range of other the fuel line by means of a metering pump.
products.
- Easy to apply and use.
W MARTcHEM. 43
FUEL TREATMENT
Read the Nilaterial Safetl Data Sheet before using this product.
For detailed infit'ntotion on,safbly ctnd hectlth, pleose refer tct Moterial Safet.y, I)utct Sheel antlior Prodtrc:t Lctbel
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed wamanties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards frorn inappropriate use of the good explained herein. Merchar.rdise might vary insubstantially depend-
ing on country of origin. The infonnation provided conceming nrerchandise is exch,rsively presented to the custorner.
44
FUEL TREATMENT
\r--
FUEL BIOCONTROL'*
DESCRIPTION PACKAGING
FUEL BIOCONTROL is a special designed liq- No
Order Size (in litres) Container
uid biocide that provides complete control 562004 20 Steel drum
against bacteria and microorganisms, which can
infect fuel storage tanks and fuel systems, APPLICATION AND USE
therefore degrading the fuel properties.
A, Dosing Procedure
ADVANTAGES AND CHARACTERISTICS FUEL BIOCONTROL dosage depends on a
number of factors such as the type of system
- Powerful at the fuel-water interface where mi-
being treated, the nature and the extent of
crobe growth is most dynamic.
microbial contamination and the degree of con-
- Maintains homogeneity and stabilization of trol required.
the fuel, this leads to the improved combus- In case of preventive treatment,0.2lt - 0.4 lt of
tion.
FUEL BIOCONTROL must be added per tone
- Provides complete disappearance of the mi- of fue1. For the contaminated fuet distillation 2
croorganisms, which contaminate fuel storage
It of FUEL BIOCONTROL is a sufficient quan-
tanks and systems.
tity per tone of fuel.
- Can be added directly to the fuel tank. In cases of filter blockages a shock dosing of 10
- Cost effective" easy to handle and use. lt FUEL BIOCONTROL is recommended per
- Prevents corrosion in fuel systems. tone of l'uel.
- Keeps filters, nozzles and injectors free from
clogging.
B. Feeding Procedure
- Will not harrn metallic parts and synthetic FUEL BIOCONTROL is best added to the
rubber. dewatered tank that is about a third fulI. When
- Completely biodegradable with fast results. the tank is filled, the product is mixed into the
- Characterized by its very good biocidal and system.
biostatic effect. In cases of heavy fouling, the system should, if
possible, be cleaned before FUEL BIOCON-
PHYSICAL PROPERTIES TROL is used.
FUEL BIOCONTROL is a liquid mixture of or-
ganic solvents and highly effective biocides. It
has the following physical properties:
Appearance / Color : Red liquid
Specific Gravity : 0.85/15"C '
Odor : Characteristic
petroleum - like odor
Flash Point : > 40oC
MARIGH.EM, 45
FUEL TREATMENT
Avoid inhalation of vapors. Othenvise, relxo\;e the ail-ected person to fresh air, if not breath
lnhalation give artificial respiration. If breathing is difficult qualified personnel should administer
oxygen. Seek rneclical attention.
If Swallorved Avoid ingestion. Otherrvisc, rinse mouth. Seek imrneiliate n:Ledical attention.
GENERA.L Avoid spillage, splashing and mishandling. Precautioflary mcasures for body protection are
INSTRUCTIONS strongly recommended beibre use.
Read the Material Safety Data Sheet trefore using this product.
For detailed informatian on safety and healtk, please refer to Material Sofet.v- I)ata Sheet and/or Product Label
46
MARICHEM
FUEL TREATMENT
SOOT CLEANER'"
DESCRIPTION Appearance / Color : Glcen. tlrin granulcs
SOOT CLEANER is a highly effective powder pou'der
compound that acts as a combustion catalyst in Speciflc gravity : I .2t)- I .30,'l ,5"C
order to easily remove soot and ash deposits Flash Point ; Notte
from surfaces where accumulation exists. Soot
accumulation occurs, as a result of the fuel PACKAGING
combustion that takes place during the ignition Order No Size (in kgrs) Container
period or the soot blowing operation. Soot 56s004 50 Plastic drurr
cleaner is applicable to all types of boiler and
diesel exhaust systems due to its characteristic APPLICATION AND USE
action to explode when it enters the combustion
A. Dosing Procedure
flame.
The quantity of Soot Cleaner to be used is sug-
ADVANTAGES AND CHARACTERISTICS gested at a ratio of 1 kg per 400-500 square
- Reduces soot and ash deposits at a controlled meters of surface area on a daily basis. Notice
rate. that the above quantity may be altered, depend-
- Eliminates the risk of hazardous soot fires. ing on the system to be treated, based on partic-
- Effectively protects steel surfaces against ular v-ariations and/or the manufacflrrer's techni-
ware off and shorl life duration caused by ash cal speci{lcations.
and soot build up and very high temperatures. B. Cleaning Procedure
- Reduces the ignition point temperature of soot SOOT CLEANER is applicable to many sys-
and fire scale, which results in easy combus- tems such as diesel exhaust gas economizers,
tion of carbon deposits forming an easily re- fire tube boilers, main boilers, etc.
movable dry ash. in the case of diesel exhaust economizers. the
- Prevents acid from forming, reducing the risk product is applied upstream, of the area being
of corosion. treated into the exhaust gas system.
- Induces fuel efficiency which contributes to In the case of boilers, the product is applied
fuel saving. from a suitable porl point of the system.
- Increases heat transfer and can maximize Make sure that the powder is spread through to-
boiler efficiency. wards the backside of the combustion chamber.
- Minimizes cleaning and maintenance cost.
- Easy to handle and apply.
PHYSICAL PROPERTIES
SOOT CLEANER is a dry powder com-
pounded by specific combustion catalysts, for-
mulated to intrude and break fused ash deposits
and strong bonded carbonaceous deposits by
dislocating the combustion binders due to its
explosive action inside the exhaust system.
{"8.
-A*
.W MARICHEM 47
FUEL TREATMENT
Read the Nlaterial Sal'etv Data Sheet before using this product"
MARICHEM MARIGASES Worldwide Seryices or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used coatrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
48
MARICHEM FUEL TREATMENT
r-#
?4
W
MARIGHEM. 49
FUEL TREATMENT
a dispersant to enhance product dispersion in take into consideration the design and operating
luel oil. As a water-based product, it has no characteristi.cs of the boiler. The suggested
flash point issues and is not sensitive to mois- quantity of SOOT CLEANER LIQUID is 1 litre
ture ingress. per 4-6 cubic meters of fuel. Note that the above
Appearance / Color Yellorv to amber liquid qLrantity may be altered, depending on the type
Odor Mild of system to be treated, based on particular
Flash Point > 100'c variations in the quality of the fuel and/or the
Solubility in Water Completely soluble manufacturer's technical specifications.
Density 1.34 g/cmr at 20"C
pH (concentrated product) : 5.0 B. Gleaning Procedure
SOOT CLEANER LIQUID is applicable to
PAGKAGING many systems such as diesel exhaust gas econ-
No
Order Size (in litres) Container omizers, fire fube boilers, main boilers, etc.
563005 30 Plastic jerrican In the case of diesel exhaust systems, the prod-
uct is applied upstream, of the area being
APPLICATION AND USE treated into the exhaust gas system.
ln the case of boilers, the product is applied
A, Dosing Procedure from a suitable port point of the system, prefer-
The quantity of SOOT CLEANER LIQUID to ably with an injector, making sure that the liq-
be used can depend on many factors such as the uid is spread right through towards the backside
type of problem and its severify; we must also of the combustion chamber.
Read the Material Safety Data Sheet before usiirg this product.
F'or detailed information on sa/bry' anel health, please refer to Material Sa/bn Dam Sheet and/or Product Label.
MAzuCHEM MARIGASES Worldwide Sen'ices or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any', along with any expressed waranties concerling this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
irnpending hazards frorn inappropriate use of the good explained herein. Merchandise rnight vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
50
MARICHEM'
PART I
MARICHEM TANK CTEANERS
v ALCACLEAN H.D.''
DESCRIPTION PHYSICAL PROPERTIES
ALCACLEAN H.D. is a high quality product ALCACLEAN H.D. is a water solvent alkaline
classified as a general cleanerhemover of veg- concentrated liquid solution, consisting of spe-
etable oil, animal oil, fat, fuel oil, lube oil and cific salts, detergents and wetting agents.
pet coke residues from cargo and storage tanks Appearance / Color Clear, colorless liquid
as well as te other systems. Furthermore, it Odor Odorless
removes carbonaceous deposits, resulting from Specific gravity 1.22175"C
car exhausts that can exist in a ships garuge pH 13
area, roof walls and hull sides. This powerful Flash Point None
concentrated formula provides immediate and
efficient results whilst also acting as an odor PACKAGING
eliminator. No
Order Size (in litres) Container
Its use on Aluminum, Zinc and Tin surface 833003 30 Plastic jerrican
coatings is prohibited unless further dilution 832103 210 Steel drum
with water has been conducted.
APPLICATION AND USE
ADVANTAGES AND CHARACTERISTICS
- A non-flammable liquid mixture. A. Dosing Procedure
- Effectively dissolves all fat, vegetable and Rock and Roll method: Add 15,20 litres of
animal oil, dry or not. ALCACLEAN H.D. for every ton of fresh or
- Efficiently removes pet coke deposits. sea water when the tank is filled to 30% of its
- Can be used as a general purpose cleaner to capacity.
remove oil and grease deposits. Circulation method: A solution of 5-10% must
- An odor binder and eliminator. be prepared by diluting ALCACLEAN H.D.
- Can be combined with a specific range of with fresh or sea water.
products. Injection method: Prepare a solution of 5-l0o/o
- Soluble in fresh and sea water. by diluting ALCACLEAN H.D. with fresh or
- Acts as an acid-netttralizing agent. sea water.
- Cost effective, easy to apply and use.
B. Gleaning Procedure
During 1996, chemical tankers were only per- Rock and Roll method: After you have filled
mitted to use tank cleaning agents, which had the tank with water (fresh or sea) to 30% of its
been approved and evaluated by the capaciry and added the required amount of
International Maritime Organisation (IMO). ALCACLEAN H.D., let it stand for approxi-
ALCACLEAN H.D. was evaluated through' mately 24 hours. Then fill with more water to
IMO's Working Group on the Evaluation of 90Yo of the tank's capacity level. This way the
Safety and Pollution Hazards of Chemicals tank will be cleaned by natural agitation due to
(ESPH Working Group) and found to meet the wave motion. Leave for a few days, then drain
requirements of paragraph 1.8.2 of the P&A the tank completely and rinse off by ballasting -
Standards. deballasting the tank 2-3 times with water.
ww
W MARICHEM' 53
TANK CTEANERS
Read the Material Safety Data Sheet before using this product.
For detailed information on safe4; and health, please refer to Material Safety Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
54
TANK CTEANERS
CEMENT REMOVER''
DESCRIPTION Appearance / Color : Clear, red liquid.
CEMENT REMOVER is an effective acid gravity
Specific : 1.16i15"C
based liquid mixture specifically designed to Solubility :Appreciable
deal with hard cases of cement cargo deposits pH (l% Solution) : 1
FHt
ffi
**
MARTCHEM 55
TANK CTEANERS
Read the Material Safety Data Sheet before using this product.
For detailed inJbrmcttion on ,scfbtv and health, please reJer to Material SaJbty Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided conceming merchandise is exclusively presented to the customer.
56
TANK CTEANERS
LIME CLEANER''
DESCRIPTION requirements of paragraph 1.8.2 of the P&A
LIME CLEANER is a concentrated acid-based Standards.
liquid product designed to attack and eliminate
PHYSICAL PROPERTIES
limestone, caustic lime deposits and dry lime
stains from cargo tanks and other large common LIME CLEANER is a concentrated aqueous so-
metal surface installations. LIME CLEANER is lution consisting of a blend of acids, special
formulated with strong acids, surface-active surfactants and specific corrosion inhibitors.
agents and special corrosion inhibitors, suffi-
cient enough to neutralize strong alkaline-caus- Appearance / Color Clear, light red liquid
tic conditions. Specific gravity 1.10-1.201t5'c
Solubility Appreciable
ADVANTAGES AND CHARACTERISTIGS pH 1-1.s
- Ideal for the removal of limestone, birdlime Odor Acidic
and dry lime stains from all common metal
tanks and installations. PACKAGING
- Acts quickly and thoroughly. No
Order Size (in litres) Container
- Applicable to all metal surfaces and parts 833017 30 Plastic jerrican
except those being galvanized and those made
of Tin, Zinc, Aluminum and Lead. APPLICATION AND USE
- A water-soluble, non-flammable liquid mix- A. Dosing Prooedure
ture.
- Can be used to safely neutralize strong alka- LIME CLEANER must be used in quantities
proportional to the tank surface area that is to be
line liquids and solids.
- No known effect on rubber or plastic com- covered, the extent of contamination, the avail-
pounds.
able downtime and the application method
- May be combined with a specific range of being used. Therefore, the actual quantity
needed cannot be prescribed beforehand, since
other products.
- Replaces the use of other products, which fail the operator is the best placed person, to decirje
the required quantity, analogous to the situation
to treat awkward situations like the removal
at hand.
of salt deposits and other hard deposits such
as rust. B. Cleaning Procedure
- Cost effective, easy to apply and use. LIME CLEANER may be applied by two meth-
ods, injection and soaking.
During 1996, chemical tankers were only per- Injection is a method where a high-pressure
mitted to use tank cleaning agents, which had machine, suitable to process chemical solu-
been approved and evaluated by the tions, is used with a 50% LIME CLEANER
International Maritime Organisation (IMO). lwater solution to inject directly onto the tank
surface area. Then, the solution must be left to
LIME CLEANER was evaluated through
act for l5 minutes followed by thorough rinsing
IMO's Working Group on the Evaluation of
using a high-pressure water supply source.
Safety and Pollution Hazards of Chemicals
Thereafter, the surface must be left to dry.
(ESPH Working Group) and found to meet the
E_ MARIGHEM 57
TANK CIEANERS
Read the Material Safety Data Sheet before using this product.
For detailed inforrnation on safeQ and health, please refer to Material Safety Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
58
TANK CTEANERS
MARICHEM P.C.S."
DESCRIPTION agents, a corrosion inhibitor and aqueous chem-
MARICHEM P.C.S. is an innovative, concen- ical agents.
trated liquid product specifically engineered to Appearance / Color Clear, light
attack, penetrate and remove pet coke accumu- yellow liquid
lations from cargo and storage tanks. Specific gravity <1.5120'c
Additionally, it may also be used to remove pH (l% Solution) 11.5-12.5
mineral deposits and eliminate bad odors in Odor Chlorine-like
tanks and other closed systems.
PACKAGING
ADVANTAGES AND CHARACTERISTICS Order No Size (in litres) Container
- Effectively removes pet coke and mineral 833037 30 Plastic jerrican
deposits from cargo holds and tanks.
832 1 38 210 Plastic drum
- Can also be efficiently used as a general pur- APPLICATION AND USE
pose cleaner to eliminate bad odors in tanks
and other closed systems.
A. Dosing Procedure
- Acts quickly and thoroughly. MARICHEM P.C.S. may be used concentrated
- Can safely be used on all metals and metal or diluted with water, depending on the degree
alloys (even if painted/vamished). of contamination, the surface area to be treated,
- Non-flammable, non-toxic, non-conductive the desired degree of cleaning and the available
and non-volatile. downtime.
- Soluble in seawater and fresh water. Actually, the user is the best one capable to reg-
- No known effect on rubber or plastic com- ulate the quantity and concentration to be used
pounds. for the situation at hand.
- May be combined with a specific range of In any case, when the accumulation is not
other products. heavy, a 50o/o solution with water must be used.
- Cost effective, easy to apply and use. Otherwise, MARICHEM P.C.S. can be used
undiluted especially when deposition is heavy
During 1996, chemical tankers were only per- and hard spots persist.
mitted to use tank cleaning agents, which had B. Gleaning Procedure
been approved and evaluated by the
Conventional cleaning methods such as a brush,
International Maritime Organisation (IMO).
hard sponge, thick and hard broom and lor a
MARICHEM P.C.S. was evaluated through mop can be used on heavy duty and hard stain
IMO's Working Group on the Evaluation of
deposits.
Safety and Pollution Hazards of Chemicals
Note that for heavy accumulations the cleaning
(ESPH Working Group) and found to meet the.
procedure might be necessary to be repeated
requirements of paragraph 1.8.2 of the P&A
until the results are satisfactory. Furthermore, is
Standards.
important to keep in mind that I litre of
MARICHEM P.C.S. may cover a surface area
PHYSICAL PROPERTIES
of 8-10 sq. meters.
MARICHEM P.C.S. is a concentrated liquid
solution containing powerful surface - active
ffi MARTcHEM' 59
TANK CTEANERS
Read the Material Safety Data Sheet before using this product.
For detailed information on safety and health, please refer to Material Safety Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
60
TANK CTEANERS
MARICHEM T.T.C.''
DESCRIPTION During 1996, chemical tankers were only per-
MARICHEM T.T.C. is a concentrated petrol- mitted to use tank cleaning agents, which had
eum solvent-based liquid compound formulated been approved and evaluated by the
with strong aromatic solvents, emulsifying Intemational Maritime Organisation (IMO).
agents and surface-active agents in order to MARICHEM T.T.C. was evaluated through
attack, penetrate and dissolve heavy oil con- IMO's Working Group on the Evaluation of
tamination, grease, petrochemical compounds Safety and Pollution Hazards of Chemicals
and light carbonaceous deposits, which are (ESPH Working Group) and found to meet the
accumulated in oil coolers, preheated double requirements of paragraph 1.8.2 of the P&A
bottoms, bilges, deep tanks etc. Fur-thermore, it Standards.
acts as a sludge conditioner.
PHYSICAL PROPERTIES
ADVANTAGES AND CHARACTERISTICS MARICHEM T.T.C. is a powerful liquid blend
- Effectively removes and dissolves mineral of powerful petroleum solvents, superior emul-
oils, grease, petrochemicals and carbon sifying agents and high grade surfactants.
residues from tank surfaces, engine rooms,
Appearance / Color Clear, colorless liquid
mechanical installations, engine units, pafts
Specific gravity 0.85i 15'C
and components that experience heavy depo-
Solubility in water Miscible
sition. > 40"c
Flash Point
A powerful sludge conditioner. Odor Characteristic aromatic
Provides a quick and thorough emulsifying solvent odor
action.
Can safely be used on all metal surfaces and PACKAGING
its alloys (even if painted). No
Order Size (in litres) Container
No known effect on rubber and plastic com- 832020 20 Steel drum
pounds. 832120 210 Steel drum
May be used as a general purpose cleaner to
remove oil and grease deposits. APPLIGATION AND USE
Non-corrosive, non-conductive and of low
A. Dosing Procedure
toxicity.
MARICHEM T.T.C. may be applied fully con-
Disperses in water to form a milky-white
centrated or diluted with water. The quantity to
emulsion before the separation of water from
be used is proporlional to the degree of contam-
oil.
ination, the available downtime, the surface
Can be combined with a specific range of area to cover and the desired degree of clean-
products.
ing. For heavy contamination, MARICHEM
Reduces emulsion carryover and permits T.T.C. may be used undiluted, where as for
water-oil mixfures to separate into an aqueous lighter contamination we suggest a 30-50oh
phase and an oil phase. solution with water. For tank cleaning and
Cost effective, easy to apply and use. sludge conditioning various strength solutions
between 0.1-0.3% may be used.
W:.:.W'
fr :'.:'
W MARICHEM' 6t
TANK CTEANERS
Read the Material Safety Data Sheet before using this product.
For detailed inJbrmation on sufeq, and health, please refer to Material Safet,v Data Sheet and/or Product Label,
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies wananties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise rnight vary insubstantially depend-
ing on country of origin. The information provided conceming merchandise is exclusively presented to the customer.
62
TANK CTEANERS
TANK CLEANER'*
DESCRIPTION Appearance / Color : Clear, colorless liquid
TANK CLEANER is a powerful solvent emul- Specific gravity : 0.80/15'C
sifier, consisting of emulsifring agents, surfac- FlashPoint :>40oC
tants, strong solvents and corrosion inhibitors. Odor : Slightly aromatic odor
Its main purpose is the cleaning of double bot- PACKAGING
tom tanks, deep tanks, bilges, etc, that have No
Order Size (in litres) Container
become contaminated with oil residues and 832029 20 Steel drum
petroleum base compounds. Furthermore, it 832129 210 Steel drum
may be used as a general degreaser in special
APPLICATION AND USE
situations where optimum results are sought.
A. Dosing Procedure
ADVANTAGES AND CHARAETERISTICS
The quantity of TANK CLEANER to be used
- A concentrated degreasing solution, ideal for is proportional to the tank capaci!51 the level of
use in cleaning cargo tanks, deep tanks, bilges
contamination and the degree of cleaning
and pipelines. required, as such; appropriate dosing can be
-Non-corrosive and of low toxicity. decided by consulting the table found in the
- When mixed with water, a milky white emul- next page. NOTE: The dosage to be used must
sion is formed. be based on the total tank capacity and not on
- No known effect on rubber or plastic com- the water percentage to be ballasted in the tank.
pounds.
- Can be used as a general degreaser in very B. Gleaning Procedure
diffi cult cleaning situations. Preparation: Before applying TANK
- It may be applied to all kinds and types of CLEANER, prepare the tanks that are to be
metal surfaces, painted or not. cleaned by washing them first (if this is possi-
- May be combined with a specific range of ble), with a high-pressure waffn water supply.
products. When not at sea.' Determine the quantity of
- Cost effective, easy to apply and use. TANK CLEANER to be used and fill 75o/o of
During 1996, chemical tankers were only per- tank capacity with seawater. In order to achieve
mitted to use tank cleaning agents, which had optimum results, the emulsion formed must be
been approved and evaluated by the warmed and maintained at 60 C for at least 3-5
International Maritime Organisation (IMO). days (if possible). At the end of the three days
TANK CLEANER was evaluated through time, deballast the tanks of the cleaning solu-
IMO's Working Group on the Evaluation of tion and rinse clean with seawater by ballasting
Safety and Pollution Hazards of Chemicals and deballasting until the water flow becomes
(ESPH Working Group) and found to meet the clear. NOTE: In cases, where tanks are heavily
requirements of paragraph 1.8.2 of the P&A' stained or contaminated, the cleaning procedure
Standards. must be repeated, as described above.
Rock and Roll method: This method is applica-
PHYSICAL PROPERTIES
ble for tank cleaning at sea. Fill the tank with
TANK CLEANER is a blend of aliphatic sol- 0.1-0.3% of TANK CLEANER and leave solu-
vents, non-ionic and anionic surface agents, tion to act for 2-6 hours. This will enable the '@' "
emulsifying agents and corosion inhibitors. solution to soften, penetrate and dissolve the
fffi
3E MARICHEM
W
63
TANK CTEANERS
hard bottom deposits. Then fill the tank with BALLAST TANK CLEANER QUANTITY (litres)
TANK
seawater to 30o/o of total capacity and let the CAPACITY MINIMUM NC)RMAL MAXIMUM
solution stand for approximately 1-2 days. (tones)
2.5 2 1 6
During this period, cleaning will be initiated 5.o 1 8 t2
due to wave motion. After that, fill the tank with r 0.o 8 16 /4
15.0 t2 21 36
seawater to 600/o of total capacity and let the 20.0 l6 32 .+8
solution act for long enough, so that complete 25.0 20 40 60
cleaning can be accomplished, due to wave 30.0 21 48 72
,10.0 32 6,1 96
motiorVnatural agitation. Afterwards, di s charge 50.o 40 8L) 120
solution from tank and then rinse off by filling 75.O 60 120 180
t60 210
tank l-2 times its capacity with seawater. Note 100.0 8t)
;1.80
200.0 160 320
that TANK CLEANER must always be fed to I50.0 200 :1OO 600
the tank and then to the bunkers. 300.0 240 480 720
Read the Material Safety Data Sheet before using this product.
For detailed information on safety and health, please refer to Material Safety Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided conceming merchandise is exclusively presented to the customer.
64
TANK CTEANERS
6:,::::
-?il, MARICHEM 65
TANK CTEANERS
achieve optimum results, the emulsion formed BALLAST TANK CLEANER QUANTITY (litres)
must be warmed and maintained at 60 C for at TANK
CAPACITY- MINIMUM NORMAL MAXIMUM
least 3-5 days (if possible). At the end of the (tones)
three days time, deballast the tanks of the clean- 2.5 2 4 6
ing.solution and rinse clean with seawater by ).u 4 8 t2
ballasting and deballasting until the water flow 10.0 8 16 24
66
TANK CTEANERS
Read the Ntaterial Safet-v Data Sheet belbre using this product.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies walranties of merchantabil-
ity and competence, if any, along with any expressed warranties conceming this merchandise, shall not be actionable or
peftinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer. .-
-
{w6,
W
'**u*,
MARIGHEM' 67
MARIGHEM.
PART II
a
MAINTENANCE
MAINTENANCE
*w
E= MARICHEM
'W
7l
MAINTENANCE
time, the cleaning process can be started by agi- sure machine. In this procedure, the A.C.C. is
tating the solution, while heating should be directly injected into the air cooler unit, which
applied at approximately 30oC. Leave to soak is then left to soak for as long as is needed, in
for approximately 2 hours, afterwards, remove order to keep the deposits soft. Afterwards,
from bath, rinse with large amounts of warm rinse thoroughly with plenty of fresh warrn
water under pressure, then blow-dry with air. water using a high pressure supply and blow it
Note that the immersion period and heating dry with air.
temperature are dependent on the severity of Note that if necessary the cleaning procedure
contamination. may be repeated depending on the degree of
Injection is the method, which should be used deposit accumulation.
for the following cases, those dealing with This cleaning method is only recommended if
static, those when dismantling is not possible, approved by engine manufacturers.
and those when the air cooler uses a high-pres-
Read the Material Safety Data Sheet before using this product.
For detailed information on sa/bty and health, please refer to Material SaJbty Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
72
MAINTENANCE
PACKAGING
No
Order Size (in litres) Container
832002 20 Steel drum
'e
*'*
ww
ere
*. MARICHEM 73
W
MAINTENANCE
Read the Material Safety Data Sheet before using this product.
For detailed infbrmation on safen'and health. please re/er to Material Salbtr Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
peftinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origtn. The infbrmation provided concerning merchandise is exclusively presented to the customer.
74
MAINTENANCE
ALGACTTVE LIQUID"
!
ffi MARTcHEM' 75
MAINTENANCE
Read the Material Safety Data Sheet trefore using this product.
For detailed information on safety and health, please refer to Material Safety Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerrring this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
76
t-
MAINTENANCE
BIOACTIVE POWDER''
DESCRIPTION PACKAGING
BIOACTIVE POWDER is a mixture of various No
Order Size (in Kgrs) Container
enzymes and spores, formulated to eliminate 555555 4 Plastic Pail
hazardous and toxic waste and their growth. It
APPLICATION AND USE
will also remove and dissolve solid organic
waste, natural oils, grease and tartar deposits. BIOACTIVE POWDER is a mixture of various
The enzymes and spores will break down enzymes and spores to be used in organic waste
organic matter into simple compounds. It has treatment. Organic wastes contain a mixture of
been designed for the cleaning of restrooms complex compounds, which have to be broken
(toilets), vacuum toilets, bathing rooms, storage down to simple compounds before disposal.
rooms, kitchen sinks, collection lines and in The enzymes of BIOACTIVE POWDER
general the sewagelsanitary system of the ves- immediately starl to break down the organic
sel. Furtherrnore, its concentrated scent pro- waste. The nutrient salts present in BIOAC-
vides the added advantage of being an odor TIVE POWDER help to create a medium for
eliminator. the spores to produce additional enzymes,
which constantly break down proteins and fats.
ADVANTAGES AND CHARACTERISTICS That way, BIOACTIVE POWDER reduces
- Multi purpose cleaner for toilets, drains, Biological Oxygen Dernand (BOD), Chemical
showers, storage rooms, quafier rooms etc. Oxygen Der:nand (COD) and Total Suspended
- Unclogs and maintains clearways in pipelines Solids (TSS).
and sewage sanitary systems. The initial dosage is 1 kgr of BIOACTIVE
- Acts quickly and efficiently, while being safe POWDER for 15000 ltrs.
to use. Then, continue dosing 500 grs for 15000 ltrs
- Eliminates odor and is biologically active once a week to keep a clean system.
- Environmentally safe and completely Use of any additional acidic, alkaline or chlo-
biodegradable. rine-based cleaner is not recommended, as will
- No effects on rubber or plastic compounds. de-activate the bacterial action.
- May be used in combination with other clean-
ing products.
- Cost effective, easy to handle and apply.
- Acts as an anti-foaming agent and is water
soluble.
PHYSIGAL PROPERTIES
BIOACTIVE POWDER is a mixture of various
enzymes along with spores and vegetable cells.
containing powerful surfactants and bacterial
strains.
BIOACTIVE POWDER works better under the
following parameters:
Temperature :20oC - 50'C
pH :5.5-9.0
€'a;a
w' MARTGHEM'' 77
MAINTENANCE
Read the Material Safety Data Sheet before using this product.
For detailed infonnation on safen, and health, please refbr lo Material SaJbn' Data Sheet and/or Product Label.
MARICHEM MAzuGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties conceming this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and ir.r no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise rright vary insubstantially depend-
ing on country of origin. The information provided conceming merchandise is exclusively presented to the customer.
78
MAINTENANCE
BUFFERSOL'"
DESCRIPTION PACKAGING
BUFFERSOL is a revolutionary concentrated No
Order Size (in litres) Container
liquid product engineered to attack, penetrate 833033 30 Plastic jenican
and remove deposits such as traces of lead, aro- 832T34 210 Steel drum
matic hydrocarbons, chloride compounds and
sulfide compounds from zinc-silicate coated APPLICATION AND USE
tank surfaces and articles. Furthermore, it is for- A. Dosing Procedure
mulated with specific acids and corrosion
The quantity of BUFFERSOL to be used is pro-
inhibitors, pH buffered to efficiently bind and
portional to the degree of contamination, the
neutralize strong acid and alkaline compounds
surface area to be treated, the desired degree for
in extreme cleaning conditions.
cleaning and the available downtime.
ADVANTAGES AND CHARACTERISTICS In small systems, most frequently, BUFFER-
SOL is used undiluted.
- Effectively removes lead, hydrocarbon, chlo-
In larger systems, where the circulation method
ride and sulfide deposits from zinc-silicate
is required and contamination is normal, a l0o/o
coated tanks and articles.
solution of BUFFERSOL with water is ade-
- Prevents, maintains and protects from coffo-
quate, and should be enough in volume to filI
sion.
the tank up to lo/o of its capacity. If the contam-
- Acts quickly and thoroughly.
ination is heavy, higher concentrated solutions
- No known effect on rubber and plastic com-
with BUFFERSOL must be made. Furthermore,
pounds.
more of the system's capacity must be filled, so
- Non-flammable, non-corrosive and non-toxic.
that greater quantities will be circulated.
- Awater soluble product that may be used with
a wide range of other products. B. Gleaning Procedure
- May be safely used on all common metal sur- In small tanks and small surface areas,
faces and their alloys, whether painted, var- BUFFERSOL may be applied by conventional
nished or not. methods with a brush, sponge or a mop.
- pH buffered, thus acting as a neutralizing Once applied, BUFFERSOL must be left for a
agent in acidic or alkaline environments. period long enough, for it to act effectively,
- Cost effective, easy to handle and apply. whilst enabling us to wash it off, before it dries
out. The application must be repeated two more
PHYSICAL PROPERTIES times and finally rinsing with large quantities of
BUFFERSOL is an aqueous concentrated liquid water (preferably a high-pressure water sup-
solution consisting of a specific blend of acids ply), for one hour, is accomplished. Then, the
and corrosion inhibitors, pH buffered. treated surface should be left to dry.
With Butterworth tank-washing systems, for
Appearance / Color Clear, colorless liquid large cargo tanks, a l}Yo solution of BUFFER-
Specific gravity 1.05-1.08/15'C SOL with water must be used in order to ftll lo/o
pH 55
-,- of the tank's volume capacity, which then is cir-
Solubility Very soluble culated for 2-6 hours at20-7A"C by the feeding
Odor Odorless pump, found below the tank's bottom, to the
ii,r,,,l
i+ilqi+\i
l},ir.l$ M.[niGHEnil. 79
MAINTENANCE
heater and then to the tank's sprinkler system. In all cases, after completion of the application,
This way the solution is re-circulated, resulting the solution must be discarded and the system
in thorough cleaning. must be waihed with fresh water for at least one
Also note that if the solution is still adequate, hour.
and contamination is not heavy, it can be used
for washing 2-3 tanks. For this, the bottom Note that when desired, BUFFERSOL may
valve of the treated tank may be shut, allowing only be used diluted by making a solution with
access of the solution through the system to the fresh, de-ionized or distilled water. In all cases
second tank. Likely, the same cleaning proce- avoid the use of river or sea water.
dure is followed for the rest of the tanks.
Read the Material Safety Data Sheet before using this product.
For detailed information on safe4t and health, please refer to Material Safety Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
80
a MAINTENANCE
BUFFERSOL"
DESCRIPTION PACKAGING
BUFFERSOL is a revolutionary concentrated No
Order Size (in litres) Container
liquid product engineered to attack, penetrate 833033 30 Plastic jerrican
and remove deposits such as traces of lead, aro- 832134 210 Steel drum
matic hydrocarbons, chloride compounds and
sulfide compounds from zinc-silicate coated APPLICATION AND USE
tank surfaces and articles. Furthermore, it is for- A. Dosing Procedure
mulated with specific acids and corrosion
The quantity of BUFFERSOL to be used is pro-
inhibitors, pH buffered to efficiently bind and
portional to the degree of contamination, the
neutralize strong acid and alkaline compounds
surface area to be treated, the desired degree for
in extreme cleaning conditions.
cleaning and the available downtime"
ADVANTAGES AND CHARACTERISTICS In small systems, most frequently, BUFFER-
SOL is used undiluted.
- Effectively removes lead, hydrocarbon, chlo-
In larger systems, where the circulation method
ride and sulfide deposits from zinc-silicate
is required and contamination is normal, a l0o/o
coated tanks and articles.
solution of BUFFERSOL with water is ade-
- Prevents, maintains and protects from coffo-
quate, and should be enough in volume to fill
sion.
the tank up to la/o of its capacity. If the contam-
- Acts quickly and thoroughly.
ination is heavy, higher concentrated solutions
- No known effect on rubber and plastic com-
with BUFFERSOL must be made. Furthermore,
pounds.
more of the system's capacity must be filled, so
- Non-flammable, non-corrosive and non-toxic.
that greater quantities willbe circulated.
- Awater soluble product that may be used with
a wide range of other products. B. Gleaning Procedure
- May be safely used on all common metal sur- In small tanks and small surface areas,
faces and their alloys, whether painted, var- BUFFERSOL may be applied by conventional
nished or not. methods with a brush, sponge or a mop.
- pH buffered, thus acting as a neutralizing Once applied, BUFFERSOL must be left for a
agent in acidic or alkaline environments. period long enough, for it to act effectively,
- Cost effective,easy to handle and apply. whilst enabling us to wash it off, before it dries
out. The application must be repeated two more
PHYSICAT PROPERTIES times and finally rinsing with large quantities of
BUFFERSOL is an aqueous concentrated liquid water (preferably a high-pressure water sup-
solution consisting of a specific blend of acids ply), for one hour, is accomplished. Then, the
and corrosion inhibitors, pH buffered. treated surface should be left to dry.
With Butterworth tank-washing systems, for
Appearance / Color : Clear, colorless liquid large cargo tanks, a 1,0%o solution of BUFFER-
Specific gravity : 1.05-1.08/15'C SOL with water must be used in order to fill l%
pH : 5,5 of the tank's volume capacity, which then is cir-
Solubility : Very soluble culated for 2-6 hours at 20-70"C by the feeding
Odor : Odorless pump, found below the tank's bottom, to the
,i
flJ$
Iriiiili! .N,ilARIGHEM.- 79
MAINTENANCE
heater and then to the tank's sprinkler system. In all cases , after completion of the application,
This way the solution is re-circulated, resulting the solution must be discarded and the system
in thorough cleaning. must be wadhed with fresh water for at least one
Also note that if the solution is still adequate, hour.
and contamination is not hear,y, it can be used
for washing 2-3 tanks. For this, the bottom Note that when desired, BUFFERSOL may
valve of the treated tank may be shut, allowing only be used diluted by making a solution with
access of the solution through the system to the fresh, de-ionized or distilled water. In all cases
second tank. Likely, the same cleaning proce- avoid the use of river or sea water.
dure is followed for the rest of the tanks.
Read the Material Safety Data Sheet before using this product.
For detailed information on safety and health, please refer to Material Safety Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties conceming this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided conceming merchandise is exclusively presented to the customer.
80
MAINTENANCE
CARBON REMOVER'"
DESCRIPTION During 1996, chemical tankers were only per-
CARBON REMOVER is an advanced heavy rnitted to use tank cleaning agents, which had
duty liquid product formula specifically made been approved and evaluated by the
to attack, penetrate and efficiently remove com-
Intemational Maritime Organisation (IMO).
pletely carbon, grease, oiI, vamishes and other CARBON REMOVER was evaluated through
heavy deposits from diesel engine blocks, gear
IMO's Working Group on the Evaluation of
Safety and Pollution Hazards of Chemicals
boxes, pistons, rings, valves, atomizers, pipes,
(ESPH Working Group) and found to meet the
burners, coolers etc.
requirements of paragraph 1.8.2 of the P&A
CARBON REMOVER has been proven to be
Standards.
the most effective product in its category due to
its quick and complete action. This powerful PHYSICAL PROPERTIES
action is based on a two-layer mechanism. The
top-layer prevents the evaporation of the CARBON REMOVER is a concentrated two-
volatile components in the bottom-layer. The layer liquid solution with a strong aromatic sol-
bottom-layer removes the deposited substances. vent smell.
This way, the deposits are trapped and bound, The top-layer is dark red and consists of
resulting in complete and safe removal. aliphatic solvents and a corrosion inhibitor.
The bottom-layer is brown and consists of aro-
ADVANTAGES AND GHARACTERISTICS matic and chlorinated hydrocarbons, and
- Removes completely heavy carbon, grease, anionic surface-active agents.
oil, varnish and other deposits as well as old Appearance / Color Two layer liquid,
paint, resins and lacquer coatings. dark red (top) and
- Acts quickly and thoroughly. light brown (bottom)
- Non-flammable. Specific gravrty t.20l15'c
- Non-corrosive to most metal surfaces and Flash Point Not applicable
parts, except those made from soft-mild steel Odor Strong characteristic
and cast iron. aromatic solvent
- Very good results are achieved under ambient
PACKAGING
cleaning conditions this eliminates the need
for mechanical means, requiring heat. No Size (in litres)
Order Container
- Contains a strong corrosion inhibitor. 832001 2A Steel drum
- Water insoluble but hydrophilic.
- Has effects on some rubber and plastic com- APPLICATION AND USE
pounds.
- Carbon Remover is heavier than water, the A. Dosing Procedure
result being the formation of an aqueous and. The quantity of CARBON REMOVER to be
a solvent layer when water is added. used cannot be prescribed, since it must be used
- Can be combined with a specific range of undiluted and in quantities sufficient enough to
products. treat the problem at hand. In other words, the
- Cost effective, easy to apply and use. quantity depends on the degree of cleaning
desired and the contamination level. The opera-
tor is basically the one to judge the actual quan-
ww,
w:::igx.j:
ffi; MARICHEM'
W
81
MAINTENANCE
Read the Material Safety Data Sheet before using this product.
For detailed information on safett and health, please refbr to Mqterial Safety Data Sheel and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
iag on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
8:
MARICHEM MAINTENANCE
CHLORIDE TABLETS'"
DESCRIPTION PACKAGING
CHLORIDE TABLETS are a unique strong No Size (in kgrs) Container
Order
oxidizin_s disinfectant in solid tablet form, 830506 5 Plastic jerrican
x'hich rvhen dissolr-ed in u'ater release active
ctrlorine in the most efficient hypochlorous acid APPLICATION AND USE
form. CHLORIDE TABLETS are ideal for the
A. Dosing Procedure
conditioning- bl- chlorination of
swimming
pools- Jacrrrris- se\\-a-ge and rvaste water sys- The initial dosage for the treatment of pool,
sewage and waste water should be 5 tablets for
tems.
every 100 m3 of water. Thereafter, the daily
ADVANTAGES AND CHARACTERISTICS dosage should approximately be 1/10 of a tablet
for every 10 m3 of water. This is equivalent to
- Treats effectir-elr- pool. servage and waste
20 grams of a tablet per 10m3 of water. This
\vater.
dosage will approximately release 2-5 ppm of
- Acts quickll' and thoroughll..
active chlorine.
- A biocide. non toric. non flammable and non
corrosir-e. B. Feeding Procedure
:,-r ltir. that iS ,..t-tt-t-
-,r.
The u,ater system in consideration must be fed
..:'-: , ;.,:l -i 1.rllk i: b.u- skimmers or in floating trays. Moreover,
feeding can also be done by feeling the chlori-
,.:.--: ;l'--1--^-. ..':-Jl- nating pipes rvhen a concentration of 2-5 ppm
trons. of resrdual acti\ e chlorine is obtained. If the
- No heat for dissolving is required. concentration is shou,n to have dropped below
- Can be combined with a specific range of the I pprn r alue. then use both chlorinating
products. pipes.
- No known effects on rubber and plastic com- \ote that penodical n ashing of the chlorinator
pounds. rs necessarr. In thrs case, MARICHEM
- Cost effective, easy to apply and use. DESCALER LIQUID 555 oT DESCALE,R
PO\\-DER may be used.
PHYSICAL PROPERTIES
CHLORIDE TABLETS are a strong oxidizer
consisting of Trichlorineisocuanuric acid,
which undergoes hydrolysis upon contact with
water to release active chlorine as hypochlorous
acid.
MARICHEM.
E 83
MAINTENANCE
Read the Nlaterial Safetl, Data Sheet llefbre using this product.
MARICHEM NTARIGASES \\brldu'idc Serviccs or any subsidiary or associated cornpanics u"amanties of rnerchantabil-
ity and competcrlce, ilan1," along u,ith any expressed r.varrantics cor.rccming this merchandise, shall not be actionablc or
pertinent or ef'fective if'the is used contraril,v or difl-erently to the directions herein and in no othcr u'ay dr-re to
-lroocl
impcnding hazards ti'om inappropritrte use of'the goocl c.xplainccl hcrcin. Mcrchandise might vary insubstantially depcnd-
ing on country of origin. The intbrmaticln pror.ided concerning merchandise is exclusively presentcd to the customer.
84
MAINTENANCE
W MARToHEM'
MAINTENANCE
cases, two or three cleaning trials are recom- DESCALER LfQUID 555 either diluted or nLrr.
mended beforehand. Generally, a solution of depending on the degree of contarninatlon and
20%o, at 45-55oC, should be used; it must not the kind or type of deposition.
stand still, and should have periodic agitation. After the completion of the cleaning process.
This ensures constant reaction rate. At the same regardless of the method used, rinse with plentr
time we must maintain the strength of the of water and neutralize (only for the metal sur-
desired acidity by adding DESCALER LIQUID face areas) with l% solution of ALKALINITY
555 and fresh water, periodically, in order to CONTROL.
make up for the lost volume proportion due to Note that during application inflamrnable and
steam loss and surface reaction. /or toxic gases may be liberated.
Spreading is applicable for general cleaning In this case, adequate ventilation is necessary.
use on large surface areas, by conventional
means such as a brush, sponge or a mop with
Read the Material Safety Data Sheet before using this product.
Fot'detailecl irlformation on saletl, and health, please refer to Material Sa/bttt Data Sheet ancl/or Product Label.
MAzuCHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence. if any. along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
86
MARICHEM MAINTENANCE
DESCALER POWDER'"
DESCBIPTIOH other products.
DESCALER POWDER is an advanced acid - Can be used for diflicult cleaning conditions
concentrated dry pow"der fonnula consisting of such as the lavatories, showers, biological
a blend of specific acids. u.etting agents, colro- wastewater treatment units etc.
sion inhibitors. antifoam agents and a color - Cost effective, easy to handle, apply and
indicator. Its purpose is to remor,e hard scale store.
and rust deposits from water boilers, diesel PHYSICAL PROPERTIES
engine cooling systems, condensers, evapora- DESCALER POWDER is a concentrated,
tors, heat exchangers, pipeline collection sys- highly acidic pow-der compound containing a
tems, etc.
blend of strong acids, wetting agents, corrosion
DESCALER POWDER is similar to inhibitors, anti-foam agents and a color acid
DESCALER LIQUID 555 as to its properties indicator.
and range of applications. However, the differ- Appearance Color Rcddish pou der
ence lies over the fact that DESCALER POW-
Specific gravity 1.2-5 at I5'C
DER is a dry powder formula, which makes it Solubility Moderate.
easy and safe to handle and store in awkward slow reaction
conditions. Furthermore, DESCALER POW- pH ( l0% Solution) I
DER is safe to use on sensitive metals and their Odor Odorless
alloys such as Zinc,Lead. Aluminum, Tin etc.
PACKAGING
ADVANTAGES AND CHARACTERISTICS No
Order kgrs) Container
Size (in
- Highly effective for the complete removal of 835009 50 Plastic drum
rust and scale deposits from water boilers,
engine cooling systems and other water pro-
APPLICATION AND USE
cessing units and installations, due to its wet- A, Dosing Procedure
ting agents. The quantity of DESCAIER POWDER to be
- Acts quickly and thoroughly. used corresponds to the scale and degree of rust
- Requires no heating unless its activity is contamination. the available downtime, the
required to increase drastically. desired results and the system to be treated.
- Due to its strong corrosion inhibitors. it is Therefore- the concentration of the applied
applicable to all ferrous metal surfaces and solution must be made after considering the
parts, as well as those bein: gah.anized and abor-e parameters. However, DESCALER
those made of Tin. Ztnc.Lead,Aluminum etc. PO\\'DER is recommended for use at a quantity
- Contains anti-foaming agents and a color proportion of 4-5 kgs for every 100 litres of
indicator as a determinant agent of the. fresh q'ater
strength of the powder.
B. Preparation
- Water-soluble, non-flammable, non-volatile
and non-hydroscopic. There are certain actions, which must be taken
- Has ao known effect on rubber and plastic before applying DESCALER POWDER. These
compounds. are the following:
- N'fa1- be combined ,,r ith .r .peCrti"- range of
- Dissolve the powder in fresh water at a con-
centration of 4-5Yo.
t:
MARICHEM' 87
MAINTENANCE
- Before the application of the solution, rinse stant reaction rate. At the same time \\'e nrus:
the area to be treated thoroughly with water in maintain the strength of the desired acidin L'r
order to eliminate sludge and other loose de- adding DESCALER POWDER and fresh u'ater
posits. solutions, periodically, in order to make up tor
G. Gleaning Procedure the lost volume proporlion due to steam loss
and surface reaction.
DESCALER POWDER may be used either at
Spreading is applicable in general cleaning
room temperafure or heated at no more than
applications on large surface areas, by conven-
60'C in order to increase its activity and reduce
tional means such as a brush, sponge or a mop
the reaction rate. The methods to use are circu-
with DESCALER POWDER solutions at con-
lation, soaking and spreading.
centrations that depend on the degree of con-
Circulation is applicable to boilers, evapora- tamination and the kind or type of deposition.
tors, condensers, heat exchangers and generally
After the completion of the cleaning process.
closed systems that have the capability to circu-
regardless of the method used, rinse with plenty
late at a temperature of approximately 45-60"C,
of water and neutralize (only lbr the metal sur-
for 6-15 hours.
face areas) with 1% solution of ALI(ALINITY
Soaking is usually applicable in open or closed
CONTROL.
systems that do not provide circulation. In this
case, a solution of l0o/o, at 45-60"C and in two Note that during application, due to the dissolv-
or three cleaning trials is suggested. Here, the ing of the scale deposits, inflammable and /or
solution should not stand idle. This is accom- toxic gases may be liberated. In this case, ade-
plished by periodic agitation. This ensures con- quate ventilation is necessary.
Read the Material Safety Data Sheet before using this product.
For detailed infotmation on safery, and health, please refer to Material Sdety Data Sheet and/or Product Label.
\{ARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies wananties of merchantabil-
in and competence. if any, along with any expressed warranties conceming this merchandise, shall not be actionable t r
peninent or effective if the good is used contrarily or differently to the directions herein and in no other u'a1' due t.-
impending hazards trom inappropriate use of the good explained herein. Merchandise might vary insubstantiallr'depenc-
irg rrn countn ol ongin. The information provided concerning merchandise is exclusively presented to the customer.
88
MAINTENANCE
H MARICHEM. 89
MAINTENANCE
Read the Ilaterial Safety Data Sheet belbre using this product.
Fot'detoiled inlbrmation on.stfbtr ond health, Jtleose re/er to Mileriul Sct/ett'Dula Sheet ond/or Product Label
\I.\RICHEM MARIGASLS Worldwide Serr.ices or any subsidiary or associated companies warranties of merchantabil-
in and competence. if anv, along u'ith any expressed waranties concerning this n-rerchandise, shall not be actionable or
pertinent or efl-ective il the good is r-rsed contrarily or differcntly to the directions herein and in no other wa.v due to
impcnding hazards fiorr inappropriate use of the good explained herein. Merchandise rlight vary insubstantiall-v depend-
ins rrn crruntn of origin. Thc information provided concerning merchandise is exclusively presented to t1.)e custonier.
90
MAINTENANCE
ELECTROGLEAN B''
DESCRIPTION PHYSICAT PROPERTIES
ELECTROCLEAN B is a special blend of chlo- ELECTROCLEAN B is a vaporous, volatile,
rinated and powerful degreasing solvents for- concentrated product of low flammability, non-
mulated to remove grease, oil, carbon deposits corrosive and non-conductive with controlled
and other residues from electric parts and evaporation rate.
equipment without damaging painted or var- Appearance / Color Clear, colorless liquid
nished metal surfaces, insulating materials and
Specific gravity 1.201t5"c
cables. Compared to ELECTROCLEAN A Flash Point > 100IC
QUICK DRY it has slower evaporation rate. Stabilitl,' Stabie
\ apor Densin Heavier than air
ADVANTAGES AND CI{ARACTERISTICS Odor Ethereal
- Removes completely oil, grease, carbona-
ceous and various deposits leaving no dry dirt PAGKAGING
or stains behind. No
Order Size (in litres) Container
Non-corrosive and non-conductive. 20
832011 Steel drum
Can be used with a specific range of products.
Safe to use on painted or vamished metal sur-
APPLICATION AND USE
faces.
A controlled evaporation rate gives efficient A, Dosing Procedure
cleaning results as opposed to slow drying so- ELECTROCLEAN B must be applied concen-
lutions. trated at a quantity needed to accomplish com-
No need to be rinse off after it has been ap- plete cleaning; this depends on the degree of
plied. contamination to the parts/equipment.
Stron,e antistatic capabilities result in the re- Therefore, the operator/user is the one to judge
pulsion of suspended solids in the air such as the quantity needed depending on the degree of
dust, furnes and dirt. cleaning required in that pafticular case.
Preserves and maintains electrical equipment B. Gleaning Procedure
in its original state.
Once the quantity of ELECTROCLEAN B has
Cost effective, easy to apply and ready to use.
been determined, apply to contaminated
parts/equipment by brushing, wiping or by im-
mersion (for small parts). All applications must
be carried out in areas that are properly venti-
lated; this is due to the nature of the product.
Note that after use, the product must always be
well sealed in its metallic drum.
t iiAR!GHEM. 9t
MAINTENANCE
Read the Nlaterial Safetv Data Sheet before using this product.
N{ARiCHEM MARIGASES Worldwide Sen,ices or any subsidiary or associated companies warranties of merchantabil-
it1'and competence. ilany. along with any exprcssed warranties conceming this merchandise, shall not be actionable or
pefiinent or ef-fective if the good is used contrarily or differently to the directions herein and in no other way du.' to
irnpending hazalc'ls from inappropriate use of the good explained herein. Merchandise might vary insubstantially depcnd-
ing on countn trf oligir.r. Thc information provided concerning merchar.rdise is exclusively presented to the customer.
92
MAINTENANCE
ELECTROCLEAN SU PERFAST"
DESCRIPTION Appearance / Color Clear, colorless liquid
ELECTROCLEAN SUPERFAST is an innova- Specific gravity 1 .45- 1.50/15'C
W MARIGHEM, 93
MAINTENANCE
Read the Material Sal'etr, Data Sheet be{bre using this product.
MARICHEM MARIGASES Wbrldrvide Sen'ices or an1, subsidiary or associatecl colr.rpnnies rvarranties of nrerchantabil-
it1, and competelrce. if along u.ith an,v crplessed urarranties concemirrg this rlerchandisc. shall not bc actiolrable or
an,v.
pertinent or effective il thc good is tiscd cor.rtrarily or clifTereritly to the directions herein and in no other u'ay clue to
irr.rpendirrg hazards fi'orli inapplopriate use of thc good cxplained herein. Nlerchandise mi-9ht vary insr-rbslantially depend-
it.tg ot.t countrv of origin. The infbrrnation pror,ided conccming rrerchandise is exclusir.ely presentecl to the custcx'ncr.
94
MARICHEM
MAINTENANCE
FTLTER GLEANER''
DESCRIPTION APPLICATION AND USE
FILTER CLEANER is a special product formu- A. Dosing Procedure
lated by strong emulsiflring agents, surfactants
The quantity of FILTER CLEANER to be used
and powerful solvents to treat metal and ceram-
depends on two factors: the volumetric capacity
ic oil filters, which suffer from oil depositions, of the filter to be cleaned and the degree of
carbonized oil accumulation and sludge.
deposition/contamination in the fi lter.
ADVANTAGES AND CHARACTERISTICS In the flrst case, the dosage must equal the filter
capacity.
- Non-corosive and safe to use in all types and In the second case, the dosage must be coffe-
kinds of filters.
sponding to the desired degree of cleaning.
- Preserves, protects and maintains the opera-
tional capabilities of the filter by thorough B. Gleaning Procedure
and complete cleaning. The application of FILTER CLEANER is done
- Provides quick and efficient action. by the circulation or immersion method.
- Its pure, high quality components readily lf using the circulation method, determine the
remove oil and grease deposits, even when filter capacity and circulate at a constant rate for
dry. 6-20 hours.
- Can be combined with a specific range of If using the immersion method, let the fllter
products. soak in enough quantity of FILTER
- Safe to use on all metals and their alloys as CLEANER, analogous to the degree of contam-
well as those with inorganic clay finishes. ination, for a time of 6-20 hours.
- Attacks and dissolves water/oil emulsions and
concentrations. IMPORTANT NOTICE
- Cost effective, easy to apply and use. FILTER CLEANER must be used undiluted at
all times and when using the immersion
PHYSICAL PROPERTIES method, periodic agitation with the assistance
FILTER CLEANER is a concentrated of air is necessary, so that a constant surface
petroleum solvent based liquid mixture, non- reaction is maintained.
corrosive with strong emulsifying agents and
surfactants.
Appearance / Color Clear, colorless liquid
Specific grar,'ity 0.85/15'C
Flash Point > 40'c
Odor Aromatic solvent
PACKAGING
Order No Size (in litres) Container
5l:o 1_r I(r Steel dmni
E uARrcHErrr= 95
MAINTENANCE
Read the Material Safety Data Sheet before using this product.
For detailed information on safety and health, please refer to Material Safety Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties conceming this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerrring merchandise is exclusively presented to the customer.
96
MAINTENANCE
FOAM PLUS''
DESCRIPTION solutions can be tried and tested, in order to
FOAM PLUS is a concentrated water based and obtain the optimal amount for the job in hand.
water soluble, newly developed product, which In general, 50-100 ml of FOAM PLUS is ade-
can be used as an additive in all alkaline water quate per 10 litres of washing solution.
based cleaning chemicals. This enables the B. Use
cleaning duration and the penetration of the FOAM PLUS may be used in aqueous solutions
treated surface to be adequately enhanced. The with alkaline cleaning chemicals so that during
results being, increased chemical competence the application procedure, as described in the
and cost effectiveness. individual catalog sheets of each cleaning
chemical, the final product is applied in the
ADVANTAGES AND CHARACTEBISTICS form of foam by a high pressure machine or a
- Compatible to use with all alkaline water regular air powered paint-spray thick nozzle
based cleaning chemicals. unit.
- A liquid mixture that is water-soluble, non-
fl ammable and biodegradable. IMPORTANT NOTIGE
- No effect on rubber or plastic compounds. Operators must consult the Safety and Handling
- Retains chemical cleaning applications on instructions table before using FOAM PLUS.
treated surfaces.
- Cost effective, easy to apply and use.
PHYSICAL PROPERTIES
FOAM PLUS is a concentrated, semi-viscous
product.
Appearance / Color Yellow liquid
Odor Odorless
Specific gravity 1.10-1 .t5lt5"C
Solubility Complete
pH 8 (at 20"C)
PACKAGING
No
Order Size (in litres) Container
830543 5 Steel drum
s-'-:--:i
?&.t&x,
W
u*,
MARICHEM'
w*wr*
97
MAINTENANCE
Read the Material Safety Data Sheet before using this product.
For detailed information on safeQ and health, please refer to Material Safety Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
perlinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided conceming merchandise is exclusively presented to the customer.
98
MARICHEM
MAINTENANCE
w MARTCHEM' 99
MAINTENANCE
Read the Material Safety Data Sheet before using this product.
For detailecl infbrmation on sufet.t,tmd heulth, Ttleu,se refer to Matet'icrl Sctfett' Duttt Sheet and/or Pruttluct Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies waranties of merchantabil-
ity and competence, if any, along with any expressed wamanties conceming this rnerchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided conceming rnerchandise is exclusively presented to the customer.
100
MAINTENANCE
HAND GLEANER''
--
DESCRIPTION PACKAGING
HAND CLEANER is a multi-purpose heavy Order No Size (in litres) Container
duty cleaning gel mixture used by commercial 830116 5 Plastic pail
and industrial companies as a common dirt and
grease remover. Its powerful formula ensures APPLICATION AND USE
quick and thorough cleaning after any mechan- A. Dosing Procedure
ical process where the engineer has been manu-
The quantity of HAND CLEANER to be used
ally involved. Its content of cosmetic cleaners,
depends on the degree of contamination along
safe degreasers, hear,y duty detergent agents
with the desired degree of cleaning by the engi-
and light stone micro granules make HAND
neer. Thus, under normal conditions a small
CLEANER one of the most effective and safe
quantity of 5-10 grs is suffrcient to apply. In dif-
products on the market.
ficult cases, bigger quantities may be required
ADVANTAGES AND CHARAGTERISTICS and repetition of the cleaning procedure might
also be necessary.
- Highly effective at general-purpose hand
cleaning/degreasing. B. Gleaning Procedure
- Safe to use and apply even in the most sensi- HAND CLEANER is applied in its original
tive cases. form. Once the quantity is determined, the
- Removes all known kinds of dirt. engineer must rinse off his hands with water so
- Acts as a bacteria controller and eliminates as the chunk deposits are removed beforehand.
odors. Thereafter, hand cleaner is applied and the vig-
- Can be used daily. orous rubbing of the hands is necessary to
- Non corrosive, non toxic, non flammable and accomplish deep and thorough dirt penetration.
non oxidizing. When a couple of minutes have elapsed, the
- pH stabilized, thus itacts as an acid and alkali engineer must rinse off with plenty of water and
neutralizing agent. wipe dry with a towel. The cleaning procedure
- May be combined with a specific range of can be repeated if necessary. Note that hand
products. cleaning may be assisted by the use of a brush
- Easy to rinse off as water soluble. andlor a sponge.
- Cost effective, easy to apply and use.
PHYSICAL PROPEBTIES
HAND CLEANER is a concentrated paste,
blended with detergent agents, cosmetic clean-
ers, degreasers and light stone micro granules.
It is also pH stabilized.
Appearance / Color Light orange gel
Specific gravity 0.90-1.00/15'c
pH (1% Solution) 7
Solubility Appreciable
Odor Lemon scent
W MARToHEM' 101
MAINTENANCE
Read the Material Sat'ety Data Sheet before using this product.
For detailed information ctn safe4t and health, please refer to Material Safety Data Sheet and/or Produc't Label
MARICI{EM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
iry and competencc, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
perlinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concenring merchandise is exclusively presented to the customer.
102
MAINTENANCE
LIQUID SOAP''
DESGRIPTION APPLICATION AND USE
LIQUID SOAP is a multi-pu{pose heavy duty A. Dosing Procedure
cleaning soap solution used as a common dirt The quantity of LIQUID SOAP to be used
remover in commercial and industrial cleaning depends on the degree of contamination to the
processes. It may also be used to clean effi- affected area in question, along with the desired
ciently large surface areas and cargo tanks from degree of cleaning required by the user. Thus, in
animal oil, vegetable oil, fish oil, fat and waxes. cases of extreme soiling and heavy contamina-
tion LIQUID SOAP must be used undiluted,
ADVANTAGES AND CHARACTERISTICS where as in less extreme situations it may be
- Very effective general-purpose soap cleaner. diluted to a concentration, appropriate for the
- Canbe applied on all sensitive metal surfaces deposited accumu Iation.
(Tin, Lead, Zinc and Aluminum) and their
B. Cleaning Procedure
alloys as well as galvanized metals.
- Ideal for use in the cleaning of animal oil, LIQUID SOAP may be applied undiluted or
vegetable oil, fish oil, fat and wax deposits. dissolved in water by injection and/or circula-
- Acts as a bacteria controller. tion, when required. In simple cleaning proce-
- pH stabilized, thus acts as a neutralizing dures it can be used like any other common liq-
agent. uid soap with conventional ways such as a
- May be combined with a specific range of brush, sponge andlor a mop.
products.
- Cost effective, easy to apply and use.
PHYSICAL PROPERTIES
LIQUID SOAP is an aqueous concentrated liq-
uid soap solution, able to control pH and bacte-
ria growth.
Appearance / Color Light yellow,
viscous liquid
Specific gravity 0.90- 1.00/15'c
pH (1% Solution) 7
Solubility Appreciable
Odor Lemon scent
PACKAGING
No
Order Size (in Iitres) Container
833018 30 Plastic jerrican
Read the Material Safety Data Sheet before using this product.
For detailed information on safety and health, please refer to Material Safety Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided conceming merchandise is exclusively presented to the customer.
104
MAINTENANCE
W MARTcHEM' 105
MAINTENANCE
IMPORTANT NOTICE
The crew that will perform the oi1 spill disper-
sion must take all the precautionary measure-
ments required before the beginning of the pro-
CCSS.
IMPORTANT INFORMATION
Toxicity
According to the European Union (EU) laws,
thc MARICHEM OIL SPLL DISPERSANT is
in the class of chemical dispersants that fulfill
the limits of non-toxicity for a chemical disper-
sant substance. The lethal concentration 50 (LC
50) for aquatic microorganisms has been tested
and found to be equal to 0.03yo, after 24 hours
of exposure. This value is within the acceptable
limits of non-toxicity from EU directives.
The test for non-toxicity has been performed in
the laboratories of the Greek Institute of
Oceanographic and Fishing Research of the
Ministry of Research and Technology, which
are the official governmental laboratories for
non-toxicity tests.
106
MAINTENANCE
Read the Material Safetv Data Sheet before using this product.
For detoiled in/brmation on sofeh,cmd health, plectse re/er tc.t l,lcrterial Sctfi.t.v Doto Sheet und/or Produc't Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of rnerchantabil-
ity and competence, if any, along with any expressed warranties conceming this mercl.randise. shall not be actionable or
pertinent or effectivc if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise rnight vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
MARICLEAN DG.25''
DESCRIPTION During 1996, chemical tankers were only per-
MARICLEAN DG-25 is a high performance mitted to use tank cleaning agents, which had
water based alkaline cleaning agent. It is a been approved and evaluated by the
product of low toxicity that does not contain International Maritime Organisation (IMO).
either nonyl phenols or caustic alkalis. It con- MARICLEAN DG - 25 was evaluated through
sists of biodegradable ingredients safe for oil IMO's Working Group on the Evaluation of
cleaning and metal degreasing. Safety and Pollution Hazards of Chemicals
MARICLEAN DG-25 can be used as a cleaning (ESPH Working Group) and found to meet the
agent for engine rooms, decks, cargo holds or requirements of paragraph 1.8.2 of the P&A
even as a tank cleaner. It efficiently removes Standards.
heavy grease, sludge, fatty oil, fish oil, animal
and vegetable oil, MARICLEAN DG-25 can be PHYSICAL PROPERTIES
used neat or diluted with fresh water. It is read- MAzuCLEAN DG-25 is a water based alkaline
ily biodegradable after use. cleaner containing specific eco-friendly sol-
vents, non ionic and anionic surface active
ADVANTAGES AND CHARACTERISTICS agents and comosion inhibitors.
- Multi-purpose water based cleaner. Appearance/Color :Pale/YellowLiquid
- Consists of biodegradable ingredients. Odor : Ethereal Odor
- Does not contain notryl phenols neither caus- Specific Gravity : 1.05/150'C
tic alkalis. pH : 11
- Free from hydrocarbons and chlorinated sol- Flash Point : None
vents. Solubility : Completely Soluble
- Non flammable and non combustible liquid of in water
low toxicity. Compatibility :May attackAluminium
- Can be used for a variety of general cleaning, andZinc when used
such as removal of grease, oil, sludge and in a high concentrated
grime. solution.
- Can be used efficiently as cleaning agent for
PACKAGING
engine rooms, decks, cargo holds and tanks.
- No known effect on rubber. No
Order Size (in litres) Container
- Applicable to plastic, rubber and epoxy com- 833032 30 Plastic jer:rican
pounds as well to painted, coated and var-
APPLICATION AND USE
nished surfaces.
- If you are using MARICLEAN DG-25 on a A. Dosing Procedure
vertical or horizontal surface, the resident' MARICLEAN DG-25 may be applied concen-
time and cleaning ability can be furthered, by trated or diluted with water. The quantify to be
adding MARICHEM Foam Plus. used is proporlional to the degree of contamina-
- May attack aluminium and zinc. tion, the available downtime, the surface area to
- Cost effective, easy to apply and use. be covered and the desired degree ofcleaning.
For heavy duty cleaning and degreasing, MAR-
ICLEAN DG-25 can be used undiluted where-
affi
W MARIGHEM'
:WW*it,t
wffiw
109
MAINTENANCE
as for lighter contamination can be used diluted Injection method: When the prescribed solu-
with water depending on the degree and nature tion is prep.ared, inject directly to the contami-
of the contamination. nated area. Afterwards, rinse thoroughly with
Circulation method: A solution of 5%-10% water.
must be prepared by diluting MARICLEAN Soaking/Immersion method: Once the solution
DG-25 with water. is prepared, immerse the pafi, component or
Injection method: Prepare a solution of 30/r-6% unit to be cleaned and leave it to soak for about
by diluting MARICLEAN DG-25 with water. 30 minutes, making sure that all the surfaces re-
main covered in solution. Afterwards rinse thor-
B. Gleaning Procedure
oughly with water.
Circulation method: After the solution is pre-
pared, apply by circulating for approximately 6-
8 hours. Thereon, wash thoroughly with water.
You may have to repeat the procedure, in cases
of heavy contamination.
Read the N{aterial Safety Data Sheet before using this product.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies waranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided conceming merchandise is exclusively presented to the customer.
110
MAINTENANCE
MUD CONDTTIONER'"
---
*1:*
W:Wi
W MARTGHEM' 111
MAINTENANCE
Read the Material Safety Data Sheet before using this product.
For detailed in/brmation on sa/bty and health, please refer to Material Safety Data Sheet ctnd/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided conceming merchandise is exclusively presented to the customer.
tt2
MAINTENANCE
g:::::>
MARIGHEM' 11,l:3
MAINTENANCE
Read the Material Sat'ety Data Sheet before using this product.
For detailed inJbrmation on sa/ei,oncl health, please re.fbr to Marerial Sa/bty Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies waranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrariiy or differently to the directions herein and in no other way due to
impending hazalds from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided conceming merchandise is exclusively presented to the customer.
114
MAINTENANCE
'fft#,tt:fili
IMPORTANT INFORMATION
A. Toxicity
The following test results justify the OIL SPIL
EMULSIFIER to be of low toxicity to marine
life:
l,lxposure -fimc LC 50
Test Object (hrs) (mg/l)
tsrown Shrirnp A
(Crangon Crangon)
48 3300
llrou,n Sl'rrin'rp []
96 3 300- 1 0000
(('rang()n ('rangon)
116
MAINTENANCE
Read the Material Safety Data Sheet before using this product.
For detailed information on safety and health, please refer to Material Safety Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this rnerchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards frorn inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
€wA
g 'r":;l
PASSIVATION LIQUID"
DESCRIPTION PACKAGING
PASSIVATION LIQUID is an innovative, con- No
Order Size (in litres) Container
centrated liquid product specifically engineered 833024 30 Plastic jerrican
to passivate pickled installations and tank sur-
face areas made of austenitic stainless steel. It APPLICATION AND USE
provides a protective oxide layer against corro- A. Dosing Procedure
sion contamination. Furthermore, when it is Stuinless Steel Treutment: Por this application,
diluted with water, it can be safely used to clean PASSIVATION LIQUID must be used undi-
aluminum surfaces, aluminum parts and their luted in quantities proportional to cover the sur-
metal alloy compounds. face areas or installations under treatment. Note
ADVANTAGES AND CHARACTERISTICS that I litre of the product may cover approxi-
- Efficiently binds to pickled austenitic stain- mately an area of 12 sq. meters.
less steel surfaces to deactivate erosive condi-
Aluminum Cleaning: Here, PASSIVATION
tions and to protect against further corrosion.
LIQUID may be diluted to a 1:l proportion
- Can safely be used to clean aluminum instal- with water. The quantity necessary corresponds
lations, parts and surface areas when diluted to the area to be covered, the degree of contam-
ination, the available down time and the desired
with water.
degree of cleaning.
- Provides a quick and thorough treatment.
- Cannot be used until after the pickling pro- B. Procedure
CCSS. Stainless Steel Treatment; PASSIVATION
- Non-flammable, non-conductive and non-tox- LIQUID may be applied by conventional means
ic. or by the circulation method.
- Has no known effect on rubber or plastic. Conventional methods such as a brush, hard
- May be combined with a specific range of sponge and/or a thick mop can be used when
other products. stainless steel pafis and/or components are to be
- No heating is required upon application and it treated. Application should be carried out for
is water-soluble. approximately 15 minutes. Afterwards, rinse
- Cost effective, easy to apply and use. thoroughly with distilled water and leave to dry.
Circulation is a method commonly used for
PHYSICAL PROPERTIES pipeline systems and tanks. Here the system un-
PASSIVATION LIQUID is an aqueous concen- der consideration must be filled with PASSIVA-
*.&,
W MARICHEM'
'&w:
119
MAINTENANCE
Read the Material Safety Data Sheet before using this product.
For detailed information on safety and health, please refer to Material Safety Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
120
MAINTENANCE
PICKLING LIQUID'*
DESCRIPTION APPLICATION AND USE
PICKLING LIQUID is a concentrated liquid A. Dosing Procedure
solution formulated with a blend of specific PICKLING LIQUID must be used undiluted
acids, surfactants and corrosion inhibitors. Its and in quantities proportional to the extend of
purpose is to attack, penetrate and remove weld contamination you are dealing with, the surface
slag, annealing scale, grinding dust from area to be covered, the number of articles being
austenitic stainless steel constructions such as treated and the type/kind of stainless steel.
tanks, installations and components before the Anyway, the user is the one responsible to
process of passivation.
determine the actual quantity needed for each
situation at hand.
ADVANTAGES AND CHARACTERISTICS
- Efficiently removes foreign substances from B. Gleaning Procedure
austenitic stainless steel surfaces and articles PICKLING LIQUID may be applied either by
while preparing them for proper passivation. the circulation or the soaking/immersion
- Can only be used on austenitic stainless steel method.
as it corrodes other metals. However, before application, a pre-treatment
- Water soluble, acting quickly and thoroughly. process is necessary.
- Non-flammable, non-conductive and non- Therefore, before commencing, clean and
toxic. degrease the surfaces to be pickled with either
- No heating is required upon application. MARICHEM ELECTROCLEAN SUPER-
- No known effect on rubber or plastic com- FAST to remove felt pen ink marks, oils and
pounds. light carbon deposits or with MARICHEM
- May be combined with a specific range of ALCACTIVE LIQUID to remove grease
other products. deposits that have accumulated on smaller
- Cost effective, easy to apply and use. metal surfaces and parts. Afterwards, use a
high-pressure water supply to rinse well.
PHYSIGAL PROPERTIES Circulation is a method mainly used for pipe
PICKLING LIQUID is an aqueous concen- systems. Here, the system is filled with PICK-
trated liquid mixture consisting of specific high LING LIQUID, which it must be circulated for
quality acids, surface-active agents and 2-6 hours depending on the degree of soiling
advanced corrosion inhibitors. and the type of the austenitic steel. Do not
Appearance / Color Clear, colorless liquid.
pickle longer than is necessary. Thereafter,
Specific gravity t.20lt5"c ' drain the system and rinse thoroughly with
water. Passivation must follow immediately.
Solubility Appreciable
Note that before disposing of the liquid, it must
pH (I% Solution) 1
be neutralized with slaked lime.
Odor Characteristic
Souking/Immersion is a method used for parts,
PACKAGING components or other articles. The process is ini-
No
Order Size (in litres) Container tiated by filling a plastic or plastic lined bath
833025 30 Plastic jerrican with PICKLTNG LIQUID.
H
t1
MARIGHEM. 121
MAINTENANCE
Read the Material Safety Data Sheet before using this product.
For detailed information on sa/bry antl health, pleene refbr to Material Safbty Data Sheet and/or Product Label
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties conceming this merchandise, shall not be actionable or
pertinent or effective rf the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided conceming rnerchandise is exclusively presented to tlte customer.
122
MAINTENANCE
PICKLING PASTE''
DESCRIPTION - No known effect on rubber and plastic com-
PICKLING PASTE is a sophisticated, concen- pounds.
trated light blue thixothropic paste engineered - Cost effective, easy to apply and use.
to attack, penetrate and effectively remove mill
PHYSICAL PROPERTIES
scale, welding enamels, grinding remnants, iron
contaminants and other lighter deposits coming PICKLING PASTE is an adherent concentrated
from tanks, installations and articles made of thixothropic paste, highly acidic, containing
austenitic stainless steel, nickel, nickel alloys specifi c acid compounds, surface-active agents,
and copper-nickel alloys, which need to be special corrosion inhibitors and no chloride
treated before passivation. Moreover, due to its compounds.
unique thixothropic properties, PICKLING Appearance / Color : Thick, light blue paste
PASTE adheres to all surfaces positioned either Specific gravity : 1.10-1.15/15'C
vertically or horizontally thus ensuring the Solubility : Appreciable
pickling treatment. pH (l% Solution) : l-2
PACKAGING
ADVANTAGES AND CHARACTERISTICS
- Effectively removes foreign substances, sur-
No
Order Size (in kgrs) Container
face contaminants and welding deposits from
830534 5 Plastic drum
austenitic stainless steel, nickel, nickel alloys, APPLICATION AND USE
and copper-nickel alloy surfaces, installations
and components before the passivation pro-
A. Dosing Procedure
CESS. PICKLING PASTE must be used undiluted in
- Dissolves completely traces of iron contami- its natural state. The quantity needed is propor-
nants and all the oxide/hydroxides of iron, tional to the degree of contamination, the treat-
nickel and chrome, which have been formed ment time, the surface area to cover, the number
during the welding process. of the articles for treatment and the type/kind of
- Does not contain chlorides in order to avoid the steel.
pitting. In any case, the quantity must be sufficient to
- Can be used only on austenitic stainless steel, cover the surface area in question and form a
nickel, nickel alloys and copper-nickel alloys thin even coating over it. Thus, the operator
asit corrodes other metals. must carefully select the quantity needed, after
- Acts quickly and thoroughly whilst provides considering all of the above parameters and the
100% successful results. chosen method of application.
- Non-flammable, non-conductive and non- B. Cleaning Procedure
toxic.
Pretreatment: In order to ensure even pickling
- Water-soluble and no heating is required upon
treatment, degreasing of small or large surface
application.
areas must be accomplished by using undiluted
- Adheres to all surface areas, vertical or hori-
MARICHEM ALCACLEAN HD, which must
zontal.
be applied with a brush. Then it must be rinsed
- Can be combined with a specific range of oth-
er products.
off with water and leave the surface to dry.
}M
E# MARIGHEM
ryffiry.
123
MAINTENANCE
Thereafter, the application of PICKLING Note that if the temperature is 10oC below or
PASTE is possible. above the room temperature, the pickling activ-
Application.' Before use PICKLING PASTE ity and thus the reaction time changes roughly
must be well mixed by shaking and/or stirring. by a factor of two (2). If the temperature of the
PICKLING PASTE may be applied by conven- pickling surface is above 40oC, PICKLING
tional means, such as a hard and thick ro11 PASTE must not be applied until after it drops
brush, a wide paintbrush, a thick wall broom to room temperature.
etc. Once the reaction time is completed, PICK-
After application, leave the paste to react with LING PASTE must be rinsed off completely
the surface at a temperature of 20oC (room tem- with a high-pressure water supply. Then, leave
perature) as follows: the surface to dry until the passivation process
- Austenitic stainless steel types: 15-60 minutes is initiated.
- Nickel and nickel alloys: 5-20 minutes
- Copper-nickel alloys: 5-20 minutes
Read the Material Safety Data Sheet before using this product.
For detailed infbrmation on safet.v- and health. please refer to Material Safett, Data Sheet and/or Producl Label.
MARICHEM MAzuGASES Worldwide Seryices or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
124
MAINTENANCE
rffii
€g
* tY::
Read the Material Safety Data Sheet before using this product.
For detailed information on safety and health, please refer to Material Safety Dala Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed waranties conceming this raerchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
126
MAINTENANCE
RUST REMOVER'"
DESGRIPTION pH :l
RUST REMOVER is a concentrated aqueous Solubility in water : Complete
liquid solution consisting of a blend of syner- Odor : Odorless
getic antioxidants and passivators. It is used to PACKAGING
remove rust from any steel surface area and rust
stains from brass, copper, stainless steel, wood,
No
Order Size (in litres) Container
ceramic and aluminum surfaces, painted or not.
833021 30 Plastic jerrican
MARIGHEM. 127
MAINTENANCE
Read the Material Safety Data Sheet before using this product.
For detailed information on safety and health, please refbr to Mqterial Safety Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
128
MAINTENANCE
Read the Material Safety Data Sheet before using this product.
For detuiled inJbrntation on safbt,v* and health, please refer to Material Safety Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties conceming this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
130
MAINTENANCE
\-/
RUST SHIELD PHOS'"
DESCRIPTION requirements of paragraph 1.8.2 of the P&A
RUST SHIELD PHOS is a concentrated liquid Standards.
solution specifically engineered to attack, PHYSICAL PROPERTIES
remove and prevent corrosion as well as to
maintain anti-corrosive properties thereon. It RUST SHIELD PHOS is a concentrated acid-
may be applied to all metal surface areas and based aqueous solution containing a synergistic
metallic components as a preparatory anti-rust antioxidant, and a strong corrosion inhibitor,
agent before painting, varnishing and/or coating which result to rust removal and rust proofing
jobs provided that these treated surfaces are free on metal surfaces and articles.
of water. Appearance / Color : Clear, colorless liquid.
Specific gravity : l.2llI5"C
ADVANTAGES AND CHARACTERISTICS Solubility : Adequate
- Effectively attacks, penetrates, removes and PH :1
controls rust on all metal surfaces and parts Odor : Odorless
except those being galvanrzed and those made
of Tin, Zinc, Ahtminum and Lead. PACKAGING
- Protects efficiently against corrosion. No
Order Size (in litres) Container
- Acts quickly and thoroughly and no heating 833028 30 Plastic jerrican
upon application is needed.
- No known effect on rubber and plastic com- APPLICATION AND USE
pounds.
A. Dosing Procedure
- Water-soluble, non-fl ammable liquid mixture.
- Cold protective and "phosphating" rust con- The quantity of RUST SHIELD PHOS to be
verter formulated to use on all steel surfaces used cannot be prescribed, since this depends
before coating, re-coating, painting and var- on the surface arca andlor the number of the
parts to be treated, the degree of contamination
nishing applications.
- Substitutes sandblasting and hot pickling and the desired results wanted by the user.
methods, especially in the cases where they In any case, RUST SHIELD PHOS must be
used diluted at a proportion of 1 liter for every
cannot be used.
- May be combined with a specific range of 1-2 liters of water.
other products. B. Gleaning Procedure
- Cost effective, easy to apply and use. The application of RUST SHIELD PHOS can
be done by brushing with an elongated hard
During 1996, chemical tankers were only per- thick brush. 1 litre of the diluted solution will
mitted to use tank cleaning agents, which had cover 12-15 sq. meters of surface area.
been approved and evaluated by the After application, leave surface to dry com-
International Maritime Organisation (IMO). pletely for approximately 2-6 hours time.
Furthermore, it is important to note that 1 litre
RUST SHIELD PHOS was evaluated through of RUST SHIELD PHOS can cover approxi-
IMO's Working Group on the Evaluation of mately 12-15 sq. meters of light rusted surfaces,
Safety and Pollution Hazards of Chemicals where water/sandblasting has been previously
(ESPH Working Group) and found to meet the used.
ii lcfiEilil* 129
MAINTENANCE
Read the Material Safety Data Sheet before using this product.
For detailed information on safety and health, please refer to Material Safety Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
130
MAINTENANCE
'--.
SANITATION A. CLEANER"
(BroLoGrcAL cLEANER)
13I ,r
MAINTENANCE
Read the Material Safety Data Sheet before using this product.
For detailed information on safety and health, please refer to Material Safety Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerrring this merchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided conceming merchandise is exclusively presented to the customer.
132
MAINTENANCE
SOLBREAK'"
\-
DESCRIPTION During 1996, chemical tankers were only per-
SOLBREAK is an innovative, powerful sol- mitted to use tank cleaning agents, which had
vent, emulsifying product, engineered for use in been approved and evaluated by the
general cleaning, degreasing and light carbona- International Maritime Organisation (IMO).
ceous deposits removal in engine rooms, bilges, SOLBREAK was evaluated through IMO's
cargo tanks and other installations. Working Group on the Evaluation of Safety and
Furthermore, it may be used as a general Pollution Hazards of Chemicals (ESPH
degreaser in special situations where optimum Working Group) and found to meet the require-
results are sought. ments of paragraph 1.8.2 of the P&A Standards.
Its unique characteristic allows the quick break
down of the after clean emulsions into two PHYSICAL PROPERTIES
phases, a water phase and an organic (oil) SOLBREAK is a blend of superior organic sol-
phase. This provides us with the ability to dis- vents, non-ionic and anionic surfactants and
pose of the waste solution according to MAR- chemical advanced wetting agents.
POL and IMO regulations. Appearance / Color : Pale liquid
Specific gravity : 0.85/15'C
ADVANTAGES AND CHARAGTERISTICS Flash Point : > 40"C
MARTcHEM' 133
W
MAINTENANCE
/soaking method or for another type of product Soaking/Immersion is used in situations where
application method i.e. brushing. we deal with dismantled parts, articles and
B. Gleaning Procedure engine components. Here, brushing may be
applied in coordination with immersion to
Once the quantity of SOLBREAK is deter-
remove heavy accumulation.
mined, apply using any of the methods of
After the application, no matter what method
brushing andl or soaking/immersion.
has been used, you must rinse off with sea or
Brushing is used in situations where small areas
fresh water (preferably warm and under high
have heavy deposition and on highly contami-
pressure).
nated parts or engine components. Brushing is
also good for the awkward areas.
Read the Material Safety Data Sheet before using this product.
For detailed information on safbv and health, please refer to Material Sa/bty Data Sheet and/or Product Label.
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties concerning this rnerchandise, shall not be actionable or
pertinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
134
MAINTENANCE
/soaking method or for another type of product Soaking/Immersion is used in situations where
application method i.e. brushing. we deal with dismantled parts, articles and
B. Gleaning Procedure engine components. Here, brushing may be
applied in coordination with immersion to
Once the quantity of SOLBREAK is deter-
remove heavy accumulation.
mined, apply using any of the methods of After the application, no matter what method
brushing and/or soaking/immersion.
has been used, you must rinse off with sea or
Brushing is used in situations where small areas
fresh water (preferably warm and under high
have heavy deposition and on highly contami-
pressure).
nated parts.or engine components. Brushing is
also good for the awkward areas.
Read the Material Safety Data Sheet before using this product.
For detailed information on sqfetl, and health, please refer to Material Safe4; Data Sheet and/or Product Label,
MARICHEM MARIGASES Worldwide Services or any subsidiary or associated companies warranties of merchantabil-
ity and competence, if any, along with any expressed warranties conceming this merchandise, shall not be actionable or
pefiinent or effective if the good is used contrarily or differently to the directions herein and in no other way due to
impending hazards from inappropriate use of the good explained herein. Merchandise might vary insubstantially depend-
ing on country of origin. The information provided concerning merchandise is exclusively presented to the customer.
134